Database Info

[Q] HELP!! Samsung Nexus S Crashed, Cant do anything

Hi
I have a Samsung Nexus S for past 5 months. I recently upgraded to the ICS. Last week, I was listening songs on my phone and all of a sudden out of nowhere the phone re-started.
After couple of minutes, saw a message on screen saying “encryption unsuccessful, you have lost all your data. This phone will now need to rebooted”.
Underneath this message, there was only 1 option of REBOOT NOW. I had to press the button since I had no other option.
After this the phone restarted but never went past the start up animation screen. After couple of days, I gave it another shot and after going past the welcome screen, it gave me the option to register the phone again. But as soon as that screen comes up, I get all these small messages saying, email has stopped, music has stopped, android process has stopped, calendar has stopped................ at this point the phone virtually hangs itself and I can’t do anything.
Can someone please advise what is wrong with my phone and how can I fix it?
Any help would be very much appreciated.

Try this, power the phone off, now press and hold the volume up & power botton at the same time, a menu should appear, now use the volume up/down buttons till "RECOVERY" is highlighted green, now press the power button, the phone will now reboot and in to recovery and show an android on the screen, at this point you need to press and hold the power button then press volume up briefly, a menu should appear, use the volume up/down buttons to highlight "wipe data/factory reset" and press the power button, now use the volume up/down buttons to highlight "Yes -- delete all user data" once this is done select "reboot system now", this process will wipe the phone and put it back to factory settings, it won't delete usb storage though so you may need erase usb storage once you're up and running again.

d.chatten said:
Try this, power the phone off, now press and hold the volume up & power botton at the same time, a menu should appear, now use the volume up/down buttons till "RECOVERY" is highlighted green, now press the power button, the phone will now reboot and in to recovery and show an android on the screen, at this point you need to press and hold the power button then press volume up briefly, a menu should appear, use the volume up/down buttons to highlight "wipe data/factory reset" and press the power button, now use the volume up/down buttons to highlight "Yes -- delete all user data" once this is done select "reboot system now", this process will wipe the phone and put it back to factory settings, it won't delete usb storage though so you may need erase usb storage once you're up and running again.
Click to expand...
Click to collapse
I would wipe cache while you're in there too.
Sent from my Nexus S using xda premium

i tried doing that. i cant get into recovery mode, when I press volume \up and power i get into that screen where it displays all the options such as recovery, bootloader etc etc. I select recovery (I dont see a android exclamation sign instead for a split second I see android and a triangle) and press volume down/up + power button, nothing happens. after some time it reboots and hangs itself at the animation screen..........any suggestions? your help is much appreciated.

puriaditya1234 said:
i tried doing that. i cant get into recovery mode, when I press volume \up and power i get into that screen where it displays all the options such as recovery, bootloader etc etc. I select recovery (I dont see a android exclamation sign instead for a split second I see android and a triangle) and press volume down/up + power button, nothing happens. after some time it reboots and hangs itself at the animation screen..........any suggestions? your help is much appreciated.
Click to expand...
Click to collapse
I think that you have to push clockworkmod recovery image like when you root your device.
Sent from my Nexus S using Tapatalk

is there any 'how to' guide to do that?

puriaditya1234 said:
is there any 'how to' guide to do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1007782
Check this thread.
Sent from my Nexus S using Tapatalk

yeah, try using clockwork recovery.
that's much more usfeul than the stock one

i tried doing clockwork recovery, I cant unlock the bootloader, i did all the steps ie installed android drivers, went to command prompt, typed the command, I can see the option of unlocking bootloader on android but when I select yes, it still says locked. I guess I will have to give up on this phone.

puriaditya1234 said:
i tried doing clockwork recovery, I cant unlock the bootloader, i did all the steps ie installed android drivers, went to command prompt, typed the command, I can see the option of unlocking bootloader on android but when I select yes, it still says locked. I guess I will have to give up on this phone.
Click to expand...
Click to collapse
Try using one click root v6 by shabbypenguin. That will work for you. Its what I used and its so easy. Just look for it here on xda
Sent from my Nexus S using xda premium

[Q] How to reset my tablet?

Hello, I have one big problem. My tablet doesn't load. Well it loads but I get these messages: "System UI has stopped working", "(insert random name here) has stopped working" and I can't do anything. So is there any way to reset my tablet (make him like new). I don't care about data. Thank you. My tablet is goclever Terra_72.

Palatura said:
Hello, I have one big problem. My tablet doesn't load. Well it loads but I get these messages: "System UI has stopped working", "(insert random name here) has stopped working" and I can't do anything. So is there any way to reset my tablet (make him like new). I don't care about data. Thank you. My tablet is goclever Terra_72.
Click to expand...
Click to collapse
Do a factory reset or wipe cache system ui
Pls. Take time to look and read here:
http://forum.xda-developers.com/showthread.php?t=2477434
sent from SmT210/R using xda premium
im just trying to help so I hope it works

pinkLeviosa said:
Do a factory reset or wipe cache system ui
Pls. Take time to look and read here:
http://forum.xda-developers.com/showthread.php?t=2477434
sent from SmT210/R using xda premium
im just trying to help so I hope it works
Click to expand...
Click to collapse
Thanks for trying to help but I can't do anything. As soon as I launch my tablet it's frozen. And I got "System UI has stopped working" after factory reset. I did factory reset earlier because I had "System NS has stopped working".

So can anybody help?

Volume up+down+power
Try these steps it might work as it did on my swipe halo 3g tab.
1. Turn off your device
2. Press volume up+down and power (all at same time and keep it pressed)
3. Leave the power button after 5 seconds.
4. Your device will enter into recovery mode.
5. Use volumes buttons to move up and down. For enter use power button(NOTE: TOUCH WON'T WORK)
6. Click on "wipe factory data" then click on "wipe cache partition".
7. Now go to reboot device and your sorted.
[DON'T FORGET TO PRESS THANKS IF THIS WORKS]

[email protected] D€\/¡! said:
Try these steps it might work as it did on my swipe halo 3g tab.
1. Turn off your device
2. Press volume up+down and power (all at same time and keep it pressed)
3. Leave the power button after 5 seconds.
4. Your device will enter into recovery mode.
5. Use volumes buttons to move up and down. For enter use power button(NOTE: TOUCH WON'T WORK)
6. Click on "wipe factory data" then click on "wipe cache partition".
7. Now go to reboot device and your sorted.
[DON'T FORGET TO PRESS THANKS IF THIS WORKS]
Click to expand...
Click to collapse
Thanks but my tablet only has power button no volume. There are more buttons when I turn on my tablet but no physical buttons. As I said my tablet freezes so I can't do anything. If you need screenshot I can give it to you.

Anybody?

send it
Palatura said:
Thanks but my tablet only has power button no volume. There are more buttons when I turn on my tablet but no physical buttons. As I said my tablet freezes so I can't do anything. If you need screenshot I can give it to you.
Click to expand...
Click to collapse
ok then send me the screenshots let's see what we can do.:good:

[Q] [Help] Moto G XT1033 Locked!!

I have a Moto G XT1033 indian version (v4.4.4). I was sharing files using superbeam when my phone suddenly rebooted. I have timepin app installed which sets the pin to the current time and my default pin is 1234. I tried both of them but it did not open. Tried the android device manager too but seems i did not setup remote locking. Motorola support doesnt list my device though i have an email which says my device is registered with Moto. Plus i tried booting into recovery but it says no command and android bot in distress. I dont want to lose any data but as a last resort i tried formatting too but the phone reboots normally and the format gets cancelled. I dont to lose my data, Is there anyway that unlocks my phone without wiping the data??

1.On The No Command screen , Press and hold Volume Up Button While pressing it Press power button for 2-3 Seconds And Release Power button You Will Boot In Recovery Now.
2.Don't worry it's normal problem... U Can Format if u want by using safe mode just press the power button and again press and hold Power off Option it will ask you "Reboot you to safe mode" just click yes And Reset your phone.

jbanti said:
1.On The No Command screen , Press and hold Volume Up Button While pressing it Press power button for 2-3 Seconds And Release Power button You Will Boot In Recovery Now.
2.Don't worry it's normal problem... U Can Format if u want by using safe mode just press the power button and again press and hold Power off Option it will ask you "Reboot you to safe mode" just click yes And Reset your phone.
Click to expand...
Click to collapse
Finally had to format. Thanks fr the help.
Sent from my XT1033 using XDA Free mobile app

Failed remote command not allowed for twrp recovery

I have updated my H60-L12 to the latest stable ROM B532 through the various incremental upgrades. Everything seems to be working fine. Fastboot gives my phone as still being unlocked...yet on trying to load the twrp recovery via the method suggested with the latest multitool, I keep getting the message: "failed remote command not allowed"
Could it be something in my settings? Does anyone have any suggestions?

C command :- remote command not allowed
jjaxxo said:
I have updated my H60-L12 to the latest stable ROM B532 through the various incremental upgrades. Everything seems to be working fine. Fastboot gives my phone as still being unlocked...yet on trying to load the twrp recovery via the method suggested with the latest multitool, I keep getting the message: "failed remote command not allowed"
Could it be something in my settings? Does anyone have any suggestions?
Click to expand...
Click to collapse
Honor 6X BLN-L24
I had the same issue for the longest and tried everything possible under XDA's advice. its for the first time that I was not able to find the soloution to my isuues with the phone. Desperation let me to keep on trying until i accidently found how to a "Hard Reset" which eventually solved this issue
1) Power your phone off.
2) Hold Vol Up (+) Button, while keeping it pressed push the power Button.
3) As soon as you see the honor logo (blueish color), move from Vol up (+) to Vol down (-) While Still Pressing The Power Button.
4) Keep Pressing Vol (-) and Power Button, --> will go through "turning your device on" --> Blank Screen --> Hard Reset Menu.
5) Well everyone knows from this point onwards --> Wipe It Clean, Reboot, Just like New.
Hope this helps.

G.Deep said:
Honor 6X BLN-L24
I had the same issue for the longest and tried everything possible under XDA's advice. its for the first time that I was not able to find the soloution to my isuues with the phone. Desperation let me to keep on trying until i accidently found how to a "Hard Reset" which eventually solved this issue
1) Power your phone off.
2) Hold Vol Up (+) Button, while keeping it pressed push the power Button.
3) As soon as you see the honor logo (blueish color), move from Vol up (+) to Vol down (-) While Still Pressing The Power Button.
4) Keep Pressing Vol (-) and Power Button, --> will go through "turning your device on" --> Blank Screen --> Hard Reset Menu.
5) Well everyone knows from this point onwards --> Wipe It Clean, Reboot, Just like New.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your suggestion, I have already done a factory reset several times...to no avail! Will try again and let you know if it works this time round.

jjaxxo said:
Thank you for your suggestion, I have already done a factory reset several times...to no avail! Will try again and let you know if it works this time round.
Click to expand...
Click to collapse
have you enabled developer options and usb debugging in your device?
is your device being recognized by ADB?

miststudent2011 said:
have you enabled developer options and usb debugging in your device?
is your device being recognized by ADB?
Click to expand...
Click to collapse
Yes to all of those.....and factory reset does not work in my case.

jjaxxo said:
Yes to all of those.....and factory reset does not work in my case.
Click to expand...
Click to collapse
What output you are getting for this command when you boot into bootloader?
Code:
fastboot oem get-bootinfo

jjaxxo said:
Yes to all of those.....and factory reset does not work in my case.
Click to expand...
Click to collapse
U can try to factory reset from settings too

mobile data stopped working after OxygenOS 5.1.6 update

Hi,
I just had the OxygenOS 5.1.6 update on my Oneplus 6. and after reboot, I have lost the mobile data connectivity.
tried resetting network setting, but no use.
Also tried Hard reset (with the phone off) but of no use
Turn your phone off by pressing down the power key for five seconds.
Press and hold the volume key and power button simultaneously until the device vibrates and opens the Recovery menu.
Choose your preferred language.
Using the volume keys to navigate, go to Wipe > data cache > Confirm.
Reboot the device after this is done.
Can anyone help to resolve the issue or how to degrade to the previous version.
Is the factory reset the only option, please help.
Thanks
JJohn

i can say that it has become kinda dodgy after the update.