I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Billchen0014 said:
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Click to expand...
Click to collapse
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
012345678 said:
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
Click to expand...
Click to collapse
the bootloader is locked, or so says the fastboot screen along with FRP which is why i cannot unlock the bootloader to install TWRP...
Need Warning
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
wingkou said:
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
Click to expand...
Click to collapse
That makes three of us. I ended up with the same problem after getting to step E in the rebranding. I'm no stuck not being able to unlock my bootloader as it says Phone locked in green and FRP lock in green. OEM unlocking option is greyed out in developer options
before i found a solution i hardbricked my mate 9, but it works for soft bricked mate 9 too https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315 i was in the same situation, thats how i fixed it, just follow steps from how to use the DC-phoenix tool with Factory Firmware file, update.app and hw.app
Now I'm in the same situation
After rebranding my Honor View 10 BKL AL20 to BKL L04, it can't boot into system and frp locked oem locked. Erecovery says getting package info failed.
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
Similar here with some differences. FRP-Locked, Phone unlocked, TWRP previously installed. I Can't install stock recovery because FRP locked. No Gapps, no keyboard, just some Huawei apps. OEM Unlock is grey, but bootloader unlocked.
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
MartyWeber28 said:
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
Click to expand...
Click to collapse
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Pranav Kumar said:
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Click to expand...
Click to collapse
Same here.
First you have to dload the main firmware file, then the renamed vendor.
MartyWeber28 said:
First you have to dload the main firmware file, then the renamed vendor.
Click to expand...
Click to collapse
When you try this method, the bootloader and phone (FRP) in locked state? Or Bootloader unlocked?
My phone is just booting just to Stock recovery, eRecovery or fastboot, but the "OS" won't boot. If I restart, or power on my phone just boot to eRecevery. Now in the fastboot mode the bootloader and FRP in locked state.
All software install failed.
No luck over 5-6 hours. All firmwares I want to flash ended "Software installation failed". In FF I find a B407 rollback package from Oreo, but its still not approved yet
same here, does anyone know how to fix it?
immichao said:
same here, does anyone know how to fix it?
Click to expand...
Click to collapse
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Mumtaz77 said:
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Click to expand...
Click to collapse
actually it boots, but i have an emui without google apps, and a greyed oem unlocking option, so i can't unlock
i ve same issue, frp and bootloader locked. all firmware stop at 5% no gapps and greyed oem setting (c10b521)
I do not know how to find the "magic" firmware that does not fail...
should you understand based on which criterion is installed the firmware, recovery version? version of the system? I have no idea
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
Click to expand...
Click to collapse
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
MysTiCy said:
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
I tried and ended with this error
"FAILED (remote: stat not match)
finished. total time: -0.000s"
Mumtaz77 said:
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
Click to expand...
Click to collapse
You relocked, then unlocked, and it didn't unlock? Strange. I know atleast that the same unlock/relock commands work with nougat and oreo. I've done it a few times.
360 is a full package(FULLOTA-MF-PV) for my model. Other models have different package numbers.
You need to have a full package. Make a folder "dload" on root of an SD-card, with "update.app"-file in it. I have also the "meta-inf" and "full_mainpkg.tag" there, but i don't know if they are really needed. Then just boot the phone with power+volup+voldown and it should install.
No. I relocked the bootloader, but after that and the "automatic" factory reset the phone not boot to the os, just to the erecovery. So i can not change the "OEM unlock" option to unlock again the bootloader.
The install. I'l know the install method, but not work. Any package what 8 want to install ended (after 5%) a "software install failed". Ok. The 360 PV package is a good one, but this package not work, if you want to roll back from a higher master version, like oreo. This package just work if you in nougat, or MM.
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
alimokhtarabadi said:
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
Click to expand...
Click to collapse
Yes, but it s needed flash recovery patched first...
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
Click to expand...
Click to collapse
The device starts, but how do I flash the frp partition without root?
After trying flash my honor 6x to emui8 bootloader got locked and now i cant do nothing without unlock code, i can only boot in "fastboot&rescue mode" or twrp but i cant flash anything. Its possible to restore phone to stock or i need wait unlock code.
Edit:
I contact honor uk support service but they wont give me the code :|
Its possible to get the code or re flash stock system or i can use this phone as paperweight?
Greyhunters said:
After trying flash my honor 6x to emui8 bootloader got locked and now i cant do nothing without unlock code, i can only boot in "fastboot&rescue mode" or twrp but i cant flash anything. Its possible to restore phone to stock or i need wait unlock code.
Click to expand...
Click to collapse
Wait until you get bootloader unlock code. Is your phone working fine?
Ramesh006 said:
Wait until you get bootloader unlock code. Is your phone working fine?
Click to expand...
Click to collapse
Ye the phone work fine
There are 2 topics in the 7X section.
Hi.
First: Sorry My bad English.
So. The base is: FRD-L09C432 officially upgraded to Oreo. Data partition encrypted, bootloader and FRP unlocked status, TWRP installed and my phone rooted with Magisk. After some read in this and other forums I edited the phone fstab files, to delete data encryption. After edit this files I do a "Format Data" in TWRP. After that the FRP status changed from "Unlocked" to "Locked", and in Settings the "OEM Unlock" disabled and grayed. Bootloader status stay in unlocked. So this is the current state. The Recovery not changeable from TWRP to stock, because FRP-Lock status.
So, My questions is: How do I unlock FRP? If I rollback to Nougat, the FRP is unlock or not, or what? How do I rollback with TWRP? HurUpdater? What can I do, because if I rollback and FRP stay locked, I won't flash back the TWRP. And if this occur, I can't root my phone, and have other problems.
Ideas?
Did you try to unlock bootloader via fastboot?
cococchio said:
Did you try to unlock bootloader via fastboot?
Click to expand...
Click to collapse
bootloader already unlocked. I won't try to relock, because 1 months ago I relocked, and my phone is bricked. Won't boot to system, and just DC-Unlocker helps to bring back my phone to life.
Good to know. I am also bricked but I was able to unlock bootloader via fastboot. I only have access to error mode.
flash via download mode and wifi