Related
Good day everyone, this is a guide on how to enable Xposed on EMUI 3.1 (Working tested by me using the deodex method) and EMUI 4.0 (Working tested by me also and confirmed working by @Blackball,). - (Update using the deodex method 10-4-2016)
First of all the original guide for making this work on Huawei roms http://forum.xda-developers.com/honor-6/general/guide-workaround-running-xposed-t3338765. Ty @mfbcool for your guide and help. Please follow his instructions to the letter for making it work on our device.
- ([15-4-2016] New Instructions on the original thread no need to deodex the rom files, a working xposed zip has been developed for Huawei devices just flash it in twrp and do the build.prop modifications before you flash the zip for your version of rom. Already tested by me)
So my role in this is to highlight all the tips needed for making it work on our device, and the issues i faced when doing it. ([15-4-2016] The original thread is self explanatory, all of the tips here are already mentioned there this thread was created when we needed to deodex the rom files. So forgive me if i am not adding much.)
Notes
- I think a lot of the members were installing the wrong xposed files for our device we need the ARM-64 SoC files for our device because it's using the Kirin 930.
The Tips:
Lollipop:
1. The xposed files needed for your device are under the heading of: on Lollipop 5.0.x is: Xposed for EMUI 3.1 Android 5.0. (If you are on Lollipop 5.1.1 is: Xposed for EMUI 3.1 Android 5.1.1, if Marshmallow: Xposed for EMUI 4.0 Android 6.0)
http://forum.xda-developers.com/android/general/guide-workaround-running-xposed-t3338765
2. Make sure that after you install the xposed apk , you go to "build.prop" in /system using any file explorer with root and edit the line "ro.config.hwtheme=1" to "ro.config.hwtheme=0" and then save the file with the defualt permissions or you will get a bootloop. why editing the build.prop is important because without changing this the framework will not be active, you will get a red message saying framework not active. The only way to activate it is by editing this line or in the xposed app go to Settings if you enable "disabled resources hooks" doing that and then restarting will activate the framework but whatever module that uses resources will not work. So the only way working without affecting the modules is editing the build.prop file.
Marshmallow:
1. Make sure to add these lines ro.config.hwtheme=0 and ro.config.hw_theme=0 in build.prop in order for xposed to work and make sure to save the file with the defualt permissions or you will get a bootloop.
If you follow the original guide exactly and the tips you should have no issues making Xposed work.
P.S: By the way first boot may take a while (15+ mins), So don't be afraid.
Special thanks again to @mfbcool for his guide & help, and @pudup for directing me to the guide.
Sent from my HUAWEI GRA-UL00 using XDA-Developers mobile app
Thanks for the guide.
Its working for Marshmallow too. I have made a B317 deodexed Stock Rom zip file for TWRP and two test user installed Xposed.
Look here :
https://www.androidfilehost.com/?fid=24459283995307610
and here
http://www.android-hilfe.de/index.php?posts/9681033
Blackball said:
Its working for Marshmallow too. I have made a B317 deodexed Stock Rom zip file for TWRP and two test user installed Xposed.
Look here :
https://www.androidfilehost.com/?fid=24459283995307610
and here
http://www.android-hilfe.de/index.php?posts/9681033
Click to expand...
Click to collapse
Cool, are you facing any issues with it ?. So far on Lollipop no issues what so ever. By the way added your confirmation to the post if you don't mind.
I didnt tried it because im building at the moment a new version of my lollipop rom. The last version have still working xposed framework
Here a Screenshot from a test user.
working on p8lite so?
linus2014 said:
working on p8lite so?
Click to expand...
Click to collapse
Yes it's working on Huawei P8 lite too. Others have reported it working in the link of the original thread i posted. check it out.
Rashad83 said:
Yes it's working on Huawei P8 lite too. Others have reported it working in the link of the original thread i posted. check it out.
Click to expand...
Click to collapse
http://www.android-hilfe.de/thema/marshmallow-custom-rom-test-thread.762588/#post-9681033 this you say?
linus2014 said:
http://www.android-hilfe.de/thema/marshmallow-custom-rom-test-thread.762588/#post-9681033 this you say?
Click to expand...
Click to collapse
Nope, this http://forum.xda-developers.com/showpost.php?p=66036139&postcount=77
Rashad83 said:
Nope, this http://forum.xda-developers.com/showpost.php?p=66036139&postcount=77
Click to expand...
Click to collapse
thanks
Someone tried it with P8 Marshmallow? any bugs? thanks
00471 said:
Someone tried it with P8 Marshmallow? any bugs? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=66236747&postcount=19
I cant install xposed. When i install it, after reboot i get black screen with only one button of the navigation bar (i can access the shutdown menu from lock key, and i can access and the notification pannel, but nothing more). This is solved when i install the uninstall file.
My phone is already rooted. I firstly installed apk, and then installed xposed via twrp. I've tried to wipe the Dalvik but it doesnt solved.
My p8 is gra-L09, lollipop. Used this files: XposedInstaller_3.0_alpha4.apk, xposed-v80-sdk21-arm64.zip, xposed-uninstaller-20150831-arm64.zip.
What AM i doing wrong?
blocnt said:
I cant install xposed. When i install it, after reboot i get black screen with only one button of the navigation bar (i can access the shutdown menu from lock key, and i can access and the notification pannel, but nothing more). This is solved when i install the uninstall file.
My phone is already rooted. I firstly installed apk, and then installed xposed via twrp. I've tried to wipe the Dalvik but it doesnt solved.
My p8 is gra-L09, lollipop. Used this files: XposedInstaller_3.0_alpha4.apk, xposed-v80-sdk21-arm64.zip, xposed-uninstaller-20150831-arm64.zip.
What AM i doing wrong?
Click to expand...
Click to collapse
Did you deodex the rom? you have to deodex in order for xposed to work for Huawei devices, which version of Lollipop are you using?.
I flashed today the C636B320 Marshmallow firmware, and then i deodexed the rom per instructions to make xposed work on Marshmallow.
First attempt i failed because i didn't wait enough, you see the screen will get stuck on Huawei boot animation without any sign that anything is happening(no app update notification card like in Lollipop) for like a 20+ mins. Then voilà the phone booted normally. Also exposed is working fine no issues, make sure to flash xposed-v80-sdk23-arm64.zip instead of the latest one v81 which doesn't seem to work for me.
Rashad83 said:
Did you deodex the rom? you have to deodex in order for xposed to work for Huawei devices, which version of Lollipop are you using?.
Click to expand...
Click to collapse
I realized that, that i was missing the other tutorial and solved it. Thanks anyway
So I've been getting lots of different questions about how to get this and that on android 7.0 nougat so to make it easier for everyone to find ill create this thread.
1. TWRP
Is twrp available for N? If so where can I find it?
http://forum.xda-developers.com/p9/how-to/twrp-3-0-2-0-n-t3506947
2. ROOT
Oh cool now I have twrp. So how can I root?
Download phh r275 version and flash
Download and install Material phh apk: Release post
Now you should be good to go. If any issues feel free to ask here or in phh official thread.
3. BUSYBOX
User friendly zip flash this and the below steps isn't needed!
Flashable zip (1.25.1) : https://mega.nz/#!zlRm3S4B!9rAtfi0wI8oFu6xjJITgF0dRwV21UPsxvZQZzMo6VXk
This one is a bit tricky. If you run root. But
Download jrummy's busybox on Gplay.
Select installation folder to /system/xbin or if u don't want to touch system folder use /sbin if available. U can replace jrummy''s busybox with stericsson version if you like it better. But you must have installed jrummys version first if you're booted into android. Else stericsson busybox might have issues installing. Or u can use zips which contains busybox Google busybox flashable.
4. VIPER
More user friendly if using this zip the below steps should only need se Linux mode changer!
Flashable zip: https://mega.nz/#!f8wlzIrB!vVCAv-xqWB8lOrcQTgIyFL0WS7MFsE9iFb08E1YKV2Y
Is quite a mess to get working. You need se Linux mode set to permissive. Flash guitarheroes version of v4a (2.5.0.5) once flashed you need to replace the audio effects in /vendor/etc/audio_effects else you'll get I/O driver installation failed. Copy the .so files to /system/lib and /system/lib64 and set correct permission. If you have wrong busybox message. Try different versions of busybox but I use latest from stericsson and it works great. Hope u get it working.
Oh and don't forget to allow sd storage access or you'll get driver I/O error as well. And se Linux changed to permissive use se Linux mode changer for it. It works great with phh!
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
6. Xposed
Not yet available. Be patient rovo needs time we can wait for him
7. comes soon.
More stuff.
Sent from my FRD-L09 using Tapatalk
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
It doesn't matter if it's aosp. Since it is for v4a it will work. As long as the audio effects works it doesn't matter.
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had. I'll also update busybox zip which previous available is 1.24.2 which I'll bump up to 1.25.1.
I'll also going to upload my stuff to android file host. But that will be later
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Tapatalk is messing with the link
Sent from my FRD-L09 using Tapatalk
Updated op with latest busybox by stericsson. More user friendly now
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
Updated op with latest busybox by stericsson. More user friendly now
Click to expand...
Click to collapse
Nice job mate!
dodgedroid said:
Nice job mate!
Click to expand...
Click to collapse
Easy to do when you got a zip for it just update the busybox executable and replace old one
Sent from my FRD-L09 using Tapatalk
Installation of ARISE
paratox said:
how does your audio_effects.conf look like? i used one for aosp from "ARISE+Sound+Systems+Deuteronomy+2.3.3.zip" and got it working but don`t know if this is the right one for our device (huawei phones).
Click to expand...
Click to collapse
How did you installed ARISE in Nougat?
I've been trying all day and I'll always end with an I/O or Busybox error. I tried a lot of things, like changing /vendor/etc/audio_effect.conf to audio_effect.conf.bak or installing Busybox into system/bin, but none of them seems to work for me.
I'm on B361 btw. And sorry for answering an old post
LastStandingDroid said:
Also I just finished my hopefully new nougat viper4android zip (i made my own for M with material designed version for my s5 neo) which worked fine until now.
Now it extract all files to its locations even to /vendor partition which all zips I used previously never had...
New files can be found https://mega.nz/#F!HlpzlaZL!wGNoJinVPZL0YiBcdbLlKA
Click to expand...
Click to collapse
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
zgfg said:
Do you know, is your Viper4Android installer compatible with the following rooting/Busybox configuration:
- L09 c432/b378
- TWRP 3.1.0-0
- SuperSU-v2.79-201612051815-EMUI5.0.zip
- Rummy"s BusyBox (installed to /system/xbin)
as described by @hakaz and @Atarii in the post #102 and follow-ups:
https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Also, should SELinux really be switched to Permissive mode for V4A to work on P9 with Nougat?
Thanks
Click to expand...
Click to collapse
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Sent from my CUBOT_MANITO using Tapatalk
LastStandingDroid said:
Yes it should be compatible and yes u need to switch to permissive mode else it'll be asking you to install over again, or simply not start to work
Click to expand...
Click to collapse
Yes, thanks, I have flashed your Viper.zip through TWRP and installed vViPERFX_v2.5.0.5.apk
I have also installed SELinuxModeChanger and set SELinux mode to stay Permissive over rebooting
Viper4Android works fine - thanks
LastStandingDroid said:
5. MAGISK
As it seems to be now. Magisk won't work due to loop issues on boot. And mount seems to have losetup fail 1 on mounting a .img while booted.
Click to expand...
Click to collapse
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
zgfg said:
Having Magisk, can you now also install Xposed?
PS: Please provide links to your resources and threads.
Btw, you have P9 Lite - does the method for Magisk apply also to (regular) P9 (single SIM)?
Click to expand...
Click to collapse
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
simo255 said:
it workes because we have a modded boot.img created by @HassanMirza01, ask him what he did so as to he will do the same for p9 boot.img(or anyone else)
install selinux and set it to permissive, after that install magisk app via playstore and click on autoinstall
no xposed isnt working because there is no xposed for Nougat.
Click to expand...
Click to collapse
Can you post the link to install his kernel?
Danymat said:
Can you post the link to install his kernel?
Click to expand...
Click to collapse
it won't work because it's a boot.img of p9 lite not for p9
simo255 said:
it won't work because it's a boot.img of p9 lite not for p9
Click to expand...
Click to collapse
So for p9 we don't have any solutions to install magisk?
Danymat said:
So for p9 we don't have any solutions to install magisk?
Click to expand...
Click to collapse
try to install the pre rooted boot.img (phh one) via this link https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
and follow the steps that i wrote above
simo255 said:
in my p9 lite emui 5.0 magisk is successfully installed !
it worked by flashing the modded boot.img by @HassanMirza01 and by setting selinux to permissive !!
big thanks to @Paolo83 who found this method
Click to expand...
Click to collapse
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Sent from my CUBOT_MANITO using Tapatalk
LastStandingDroid said:
Is this using a Magisk.img in /data folder?
As said magisk can be made working since we had supersu working by chain I still doubt it uses a loop
Click to expand...
Click to collapse
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
simo255 said:
no there is no magisk.img folder, but there is a magisk folder which include those files (look at the screenshot
Click to expand...
Click to collapse
Yes this is how Magisk is being made working
Sent from my CUBOT_MANITO using Tapatalk
Hello everyone,
2 weeks ago my Honor 6x arrived and today I finally decided to unlock the bootloader and root it. Until now everything worked more or less fine (I can't remove preinstalled Swiftkey for example), but there's one thing that really annoys me. Viper4Android isn't working. I tried every trick I know and managed to get it to installing the driver, but after that the status was "Abnormal" Does someone know a solution ?
Thanks in advance
I downloaded guitardedheroes viper for Android from the honor 8 forums. I use kernel adiutor mod (not playstpre version but version from XDA ) to set selinux to permissive. Also don't forget to rename audio_effects.conf in /vendor/Etc to audio_effects.conf.bak
jarebear603 said:
I downloaded guitardedheroes viper for Android from the honor 8 forums. I use kernel adiutor mod (not playstpre version but version from XDA ) to set selinux to permissive. Also don't forget to rename audio_effects.conf in /vendor/Etc to audio_effects.conf.bak
Click to expand...
Click to collapse
I tried as you said but now since installed as system app (and yes i uninstalled the other version before ^^) V4A doesn't ask for root access and without that it can't install the driver.
Thread closed per OP request.
Nokia Extensions!Telegram Group
This thread is discontinued. Future posts will be made here.
Module description
Why should the Chinese have all the fun? This module aims at porting features from the Chinese variants of Nokia phones to Global variants (Android One).
Features
1. AI Floating Ball
The phone will recommend relevant application shortcut settings according to your usage. You can also:
Use the custom shortcuts to customize the shortcut menu.
Use gestures to enrich your interaction with the phone.
2. Data speed indicator
Tested and working on Nokia 6, Nokia 8 and Nokia 7 plus on Oreo. After installation, go to Settings - Network & Internet - Data Usage and toggle Show data speed. Now you should be able to see your internet speed on your status bar.
3. Screenshot Plus
Take long screenshots, edit them on the go.
4. Screen Recorder
Supports FHD, HD and SD at 30 and 60 FPS, records audio too.
5. Junk Cleaner
Clears cache and junk files.
6. Task Manager
View and end a running task.
7. Smart Boost
Enjoy gaming without frame drops and hiccups!
8.. Virus scanner
Scan for virus and keep your phone secure.
9. NokiaPure fonts
Change your system font to NokiaPure
How to's
To install the module, flash the zip using Magisk manager or TWRP and reboot.
To uninstall the module, flash the same zip again and reboot.
To get the internet speed on the status bar, go to Settings - Network & Internet - Data Usage and toggle Show data speed.
To use Screenshot plus and Screen Recorder, add them to Quick Settings.
To open AI Floating Touch, Smart boost, Task manager, Junk Cleaner and Virus scan use NEX Launcher.
Compatibility
Nokia Phones
Magisk 17+
Android 8.1.0 and above
Download from Magisk Manager.
Source code: Github[/SIZE]
Credits
@topjohnwu for Magisk
@ahrion & @Zackptg5 for Unity template and Volume Key Selector
FIH/Evenwell/HMD Global (whoever it is) for making these apps
Changelog
v1
Initial release
v1.1
Added more features - Screenshot plus, Screen Recorder, System dashboard
Added NokiaPure fonts
v1.2
Added smart boost
fixed some FCs
v1.3
Merged Pie and Oreo files into a single package
Users can now select only the files they want to install using volume keys
How to use these apps? I am unable to use the apks after downloading.
yagyanshskumar said:
How to use these apps? I am unable to use the apks after downloading.
Click to expand...
Click to collapse
The Title shows that it's a Magisk Module. Means that you need to be rooted using Magisk
Akilesh T said:
Nokia Extensions!
Module description
Why should the Chinese have all the fun?
Click to expand...
Click to collapse
Haha, great!
maybe is not working on nokia 6 with magisk root which have locked bootloader
frnsl3 said:
maybe is not working on nokia 6 with magisk root which have locked bootloader
Click to expand...
Click to collapse
I guess you are using Magisk 16.1
This module requires Magisk 17+
ZeroPointMax said:
Haha, great!
Click to expand...
Click to collapse
These features could have been added by Nokia mobile itself if they wanted to. But they decided to keep it only for China, going with "Pure stock" Android for the rest of the markets. You can say that it might reduce the speed of the updates, but China variants have been getting updates at almost the same speed as the global variants. It would have been great if they had gone with something like OOS.
Akilesh T said:
I guess you are using Magisk 16.1
This module requires Magisk 17+
Click to expand...
Click to collapse
yep so sad, able rooting but not maximum potential and soft brick too often if we modify the system
frnsl3 said:
yep so sad, able rooting but not maximum potential and soft brick too often if we modify the system
Click to expand...
Click to collapse
Magisk is systemless
Akilesh T said:
Magisk is systemless
Click to expand...
Click to collapse
not talking about magisk there, i tell you about rooting
Unable to install
I have nokia 8. When i try to install this module, it says that my decvice is pixel Xl and refuses to install. I think this is because i have installed daydream enabler module. Is there a way to bypass the device check and proceed with installing this module?
audiophile55 said:
I have nokia 8. When i try to install this module, it says that my decvice is pixel Xl and refuses to install. I think this is because i have installed daydream enabler module. Is there a way to bypass the device check and proceed with installing this module?
Click to expand...
Click to collapse
Looks like that module edited your build.prop
You can bypass it. Extract the zip. Remove the device check part in install_module function inside the config.sh file. Rezip it and flash again
Akilesh T said:
Looks like that module edited your build.prop
You can bypass it. Extract the zip. Remove the device check part in install_module function inside the config.sh file. Rezip it and flash again
Click to expand...
Click to collapse
Can you tell me exactly which lines to remove? I try removing few lines but getting the same error. I am a noob at this. BTW, i also tried deleting the entire config.sh file and still I get the same error.
EDIT: My bad. I kept flashing the original zip and not extracted zip. All good now.
audiophile55 said:
Can you tell me exactly which lines to remove? I try removing few lines but getting the same error. I am a noob at this. BTW, i also tried deleting the entire config.sh file and still I get the same error.
EDIT: My bad. I kept flashing the original zip and not extracted zip. All good now.
Click to expand...
Click to collapse
You mustn't delete config.sh file
:good:
does this module work with other android one phones? im using xiaomi a2 lite @ oreo 8.1
How can i use ai floating? . I cant find where to activate it
cbkottege said:
How can i use ai floating? . I cant find where to activate it
Click to expand...
Click to collapse
Search for "touch" in settings. There'll be a result like "Hide in do not disturb apps". That'll take you to the AI floating button' settings
Hi. I am using nokia 8. After installation module and restart, i get smart tuner and data speed indicator force close, how to fix it sir?
(Sorry for my bad english)
zeronatdo said:
Hi. I am using nokia 8. After installation module and restart, i get smart tuner and data speed indicator force close, how to fix it sir?
(Sorry for my bad english)
Click to expand...
Click to collapse
Are you using the latest version (v1.3)?
In the old days, people have to unlock the boot loader, gain the root access to install system apps like google play services.
But in the latest Huawei Mate 30, I discovered there is a system menu to enable "administrator" rights.
Settings ->Security->more settings->Device Administrator
The lzplay method also using the "admin" permission to install the google apps.
It's quite interesting that user can choose to activate or deactivate the admin rights granted to apps like lzplay.
I am not sure how much permission does this administrator have, but it definitely installing gapps to the mate30. May be we can use this admin rights to do something more.
Hope this thread will inspire developers who want to do something to bring google back yo the device
Don't think the app works anymore
Not working anymore... maybe with root, or changing the id from mate 30, with some port....
thiagoserrao said:
Not working anymore... maybe with root, or changing the id from mate 30, with some port....
Click to expand...
Click to collapse
A new method is coming
hokoonho said:
A new method is coming
Click to expand...
Click to collapse
Is this speculation or you know for sure?
I'm wondering since LZPlay is essentially getting the packages from their server, with some proxy work, will that be possible to sideload our own apk file to it (or any apk...hmmmmm), will need some reverse engineering but I will try that after I got my Mate 30 Pro
HighPower said:
I'm wondering since LZPlay is essentially getting the packages from their server, with some proxy work, will that be possible to sideload our own apk file to it (or any apk...hmmmmm), will need some reverse engineering but I will try that after I got my Mate 30 Pro
Click to expand...
Click to collapse
Can't the APK files be pushed via ADB?
HighPower said:
I'm wondering since LZPlay is essentially getting the packages from their server, with some proxy work, will that be possible to sideload our own apk file to it (or any apk...hmmmmm), will need some reverse engineering but I will try that after I got my Mate 30 Pro
Click to expand...
Click to collapse
Absolutely possible
danon.brown said:
Can't the APK files be pushed via ADB?
Click to expand...
Click to collapse
Instead of ADB, huawei is using its HDB, it's possible that there are hidden command that directly pushing files to the sysyem folder
I have just playing with a mate30 Pro, connected to a PC and discovered that there is a ROM flashing option in the offical HiSuite software. May be third party ROM will be possible?
Fastboot found in the Hisuite folder
There are commands to enable/ disable flashing stuff to the Bootloader partitions!!!
hokoonho said:
I have just playing with a mate30 Pro, connected to a PC and discovered that there is a ROM flashing option in the offical HiSuite software. May be third party ROM will be possible?
Click to expand...
Click to collapse
One workaround I heard is that you can restore the backups from those who already installed GMS to your phone, but the post was removed from Huawei club for some reason.
SoybeanYoung said:
One workaround I heard is that you can restore the backups from those who already installed GMS to your phone, but the post was removed from Huawei club for some reason.
Click to expand...
Click to collapse
Any Huawei phone or does it have to be a mate 30? I have a mate 9 laying around.
danon.brown said:
Any Huawei phone or does it have to be a mate 30? I have a mate 9 laying around.
Click to expand...
Click to collapse
There are lots of methods for Mate 9
danon.brown said:
Any Huawei phone or does it have to be a mate 30? I have a mate 9 laying around.
Click to expand...
Click to collapse
That might be spam, I am not sure.
They just posted once again. It looks they used other Mate 30's backup.
https://club.huawei.com/thread-21510398-1-1.html
SoybeanYoung said:
That might be spam, I am not sure.
They just posted once again. It looks they used other Mate 30's backup.
https://club.huawei.com/thread-21510398-1-1.html
Click to expand...
Click to collapse
Blocked again
p82maarj said:
Blocked again
Click to expand...
Click to collapse
I just read the post and post it here,
If you have a PC.
You can install Hisuite and backup a Mate 30 with google installed, then you can restore all the Google stuff to any new Mate 30.
Some people in China make a clean Mate 30 backup with google apps inatalled and share the backup file to others.
People who have such backup file can "restore" google apps into their own phone.
Yes, I can say that this works. Just not sure how long it will last
hokoonho said:
I just read the post and post it here,
If you have a PC.
You can install Hisuite and backup a Mate 30 with google installed, then you can restore all the Google stuff to any new Mate 30.
Some people in China make a clean Mate 30 backup with google apps inatalled and share the backup file to others.
People who have such backup file can "restore" google apps into their own phone.
Click to expand...
Click to collapse
jl1030 said:
Yes, I can say that this works. Just not sure how long it will last
Click to expand...
Click to collapse
Could you explain how to do it? because my device had GMS installed I want to share to my friend.