Related
Flash it with your own risk... Read thoroughly. These are all Korean websites. I only provide link to the specific page. Not Download link or any Instructions.. apply your own knowledge
I will only provide links for some custom kernels and Roms For E300S/K/L which i have gathered from different Korean Websites. You need to log in to get the download links. Since i am not Korean i cannot do that for you. Hope someone here can help.
Kernels:
1. [GalaxyS4] [Kernel] [SKT / KT / LGU +] Immortal Kernel official 0927
Link: http://www.matcl.com/?m=bbs&bid=imbeded&uid=198243
Flash the tar file via odin.
Roms
For E300L only
[Exclusive] Korean version of the entire network through the brush S4 E300L ROM version Teamleader_V1.0b1 streamline our release! By Leader
Link:http://koxda.com/forum.php?mod=view...ra=page=1&filter=typeid&typeid=264&typeid=264
Advanced stock rom for E300L. (based on MG2 firmware)
download link- http://pan.baidu.com/share/link?shareid=2634014583&uk=2936308387
changelog and rom page:- http://koxda.com/forum.php?mod=viewthread&tid=147560
New official update for E300L. MH1 firmware
download link: http://pan.baidu.com/share/link?shareid=3439609242&uk=2936308387
For E300S/K
[ROM] [] Korean version of the whole network exclusive S4 E300S / K through brush version Teamleader_V1.0b1 streamline optimized ROM released! By Leader
Link: http://koxda.com/thread-125256-1-1.html
Advanced Stock Rom for E300K only. (based on MG2)
MG2 Beautify v8
link to rom page- http://koxda.com/forum.php?mod=view...ra=page=1&filter=typeid&typeid=264&typeid=264
download link- http://pan.baidu.com/share/link?shareid=3844122325&uk=2150598706
Perseus kernel for E300S/K
http://www.matcl.com/?m=bbs&bid=imbeded&uid=194616
Flash, Enjoy and Report.. Help others :good:
any testers here???
flashed the immortal kernel for E300L.. so far so good
mohaimed said:
any testers here???
Click to expand...
Click to collapse
The kernel for e300k is also working well. Using ROW.. very nice addition. Have not played with voltages yet. Looking forward to getting some extra time out of the battery.
Sent from my SHV-E300K using XDA Premium HD app
I have played a little with voltage settings. Reduce mpu by 50. So far stable but no improvement in battery life. Will drain the battery and nd charge it full. Then I will test again
mohaimed said:
I have played a little with voltage settings. Reduce mpu by 50. So far stable but no improvement in battery life. Will drain the battery and nd charge it full. Then I will test again
Click to expand...
Click to collapse
My highest processor times are 250 & 600 which I've lowered by 25.
What are you using to adjust the voltages? Does it have settings for both big and little? I'm using System Tuner Pro and I have also tried setCPU. Neither have separate settings for the two clusters.
I'm going to suggest stweaks to the developer although it looks from his git commits he is using Perseus or Adam as a road map so maybe he has it on his to do list.
Sent from my SHV-E300K using XDA Premium HD app
koe1974 said:
My highest processor times are 250 & 600 which I've lowered by 25.
What are you using to adjust the voltages? Does it have settings for both big and little? I'm using System Tuner Pro and I have also tried setCPU. Neither have separate settings for the two clusters.
I'm going to suggest stweaks to the developer although it looks from his git commits he is using Perseus or Adam as a road map so maybe he has it on his to do list.
Sent from my SHV-E300K using XDA Premium HD app
Click to expand...
Click to collapse
no.. u cannot set multi core values.. its not supported by the kernel yet.. i use trickster mode to change the MPU voltages.. try it. reduce it by 50.. not more. u might face problems
Immortal Kernel for E300K (koe1974's build)
For those who own an E300K. It's my personal build. If there is something you want to see in this kernel feel free to PM me.
kernel source is DiaDust's from here
initram is based on the stock with modifications from Perseus kernel
Change Log:
immortal_koeBuild_08132013_1916
DiaDust commits as of Aug. 11
rooted
init.d support (create /etc/init.d folder and chmod your scripts)
enabled zram
testing support for 3rd party tethering apps
exfat and external sdcard support
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sent from my SHV-E300K using XDA Premium HD app
Kernel updated.. go to the link for changelog
Can u give me the download link for rom of my e300l i cant make an account in the koxda wesite i will be very thank full to u
.
Hi
I tried koe's kernel mod and after rebooting my sim card was not recognized.
Now i use the updated imortal kernel from this thread and everything seems ok so far.
I use prerooted and deodexed mf4 for e300l from from the e300s/k/L thread.
Perhaps i did something wrong i'm pretty new to this android flashing buisnes.
I will not rest till i bricked my phone...
Sent from my SHV-E300L using xda app-developers app
mzain109 said:
Can u give me the download link for rom of my e300l i cant make an account in the koxda wesite i will be very thank full to u
.
Click to expand...
Click to collapse
the website requires to enter a korean captcha to register. i dont know korean. sorry
badpixel said:
Hi
I tried koe's kernel mod and after rebooting my sim card was not recognized.
Now i use the updated imortal kernel from this thread and everything seems ok so far.
I use prerooted and deodexed mf4 for e300l from from the e300s/k/L thread.
Perhaps i did something wrong i'm pretty new to this android flashing buisnes.
I will not rest till i bricked my phone...
Sent from my SHV-E300L using xda app-developers app
Click to expand...
Click to collapse
why dont you flash the MG2 firmware? its the latest. go to this link http://forum.xda-developers.com/showthread.php?t=2285861
I would like to test it but I don´t know how to download it from Korean webpage.
docdan1 said:
I would like to test it but I don´t know how to download it from Korean webpage.
Click to expand...
Click to collapse
sorry mate.. in that case you need a help of the Korean who cant help you with the captcha which is needed to register..
mohaimed said:
sorry mate.. in that case you need a help of the Korean who cant help you with the captcha which is needed to register..
Click to expand...
Click to collapse
After 30minutes working with google- I downloaded the ROM so maybe tomorow.
docdan1 said:
After 30minutes working with google- I downloaded the ROM so maybe tomorow.
Click to expand...
Click to collapse
great work.. upload it here. we need your reviews
koe1974 said:
For those who own an E300K. It's my personal build. If there is something you want to see in this kernel feel free to PM me.
kernel source is DiaDust's from here
initram is based on the stock with modifications from Perseus kernel
Sent from my SHV-E300K using XDA Premium HD app
Click to expand...
Click to collapse
Tried the new kernel with the tethering test. The problem that it is having is that it is not calling on IWConfig or IW to watch the WiFi and create an ad-hoc. Other than that, the kernel is great bro. To me it actually runs better than DiaDust's main version. Keep up the great work.
Someone should also start working on E300L/S variants..
I have tried KoXDA ROM on my 300S. Works good
If somebody wants to - I puted it to FF because is difficult to download it from Korean pages.
......filefactory.com/file/6awzhdy605cv/n/KoXDA.com_E300S_amp_K_V1.0b1.rar
Click to expand...
Click to collapse
Make factory reset before flash. Then flash also CWM / because after flashing is korean language in CWM/
But you will loos samsung apps- as in custom ROMs normal
Starting logo will be Samsung :good:
Hello everyone
I present to you a new available kernel for SGAP.
Let the features:
Based on BlackBurner's sources
Flag optimized (-march=armv7-a -mfpu=neon -O2)
BLN support
ZRAM (128MB, swappiness=35)
Init.d Support
Frandom Generator (linked /dev/random & /dev/urandom to /dev/frandom)
Governors:
Performace
Ondemand
PegasusQ
SavagedZen
Lagfree
Intellidemand2
InteractiveX2 (Backported)
SmartassH3 (Backported)
Schedulers:
SIO
ROW (Backported)
noop
deadline
cfq
Added Under Volt
Added OC
Download:
Test Build 2.16.4 (new experimental features)
New Features:
Based on pure Samsung's souces
LMK backported from kernel 3.11.x
Implemented fast charger
Added BFS
Added BFQ scheduler v6r2
Included some tweaks:
zipalign every boot
sqlite optimization
seeder
kernel (from sources)
vm (from sources)
I/O (from sources)
minfree and adj (from sources)
Stable Build 2.15 Build 2
Build Stable : <version>.<release>
Build Test: <version>.<release>.<build>
Bug
- FC using antutu benchmark and subway surfers (WIP)
Fixes:
Fix swappiness (there's a problem in path, fixed in the next build)
Installation:
Download zip file and copy to sdcard
Flash zip from CWM recovery
Download BLN Control app from PlayStore to control BLN
Github: https://github.com/loxdegio/GT_S7500_LoxKernel_trebon
WIPS
USB-OTG support
backport new adreno 200 driver
I don't assume any responsibility if your phone explodes, suicide, go away with your girl/boy-friend or any other stuff.
Do not flash on anything else than an GT-S7500! No L model , W model or T model, else you get a shiny brick.
FLASH AT YOUR OWN RISK.
[KERNEL][GB][GT-S7500] LoxKernel
reserved
reserved
1. Download links not working.
2. Where are your sources? (GPL licence)
jrohwer said:
1. Download links not working.
2. Where are your sources? (GPL licence)
Click to expand...
Click to collapse
link fixed, added github source.
Wow! First under volting kernel for ace plus. Is UV + OC stable?
mon_iker said:
Wow! First under volting kernel for ace plus. Is UV + OC stable?
Click to expand...
Click to collapse
yep.....try it
thats great
will test it when i will revert to gb @loxdegio
can we get a kernel 3.0.xx for cm
vickyg.coolest said:
thats great
will test it when i will revert to gb @loxdegio
can we get a kernel 3.0.xx for cm
Click to expand...
Click to collapse
he still working on a cm 7.2 ......maybe after
imre85 said:
he still working on a cm 7.2 ......maybe after
Click to expand...
Click to collapse
i think there is no need of cm 7.2 as we have cm 10.1 and cm 10 and may be we will get cm 10.2 also
vickyg.coolest said:
i think there is no need of cm 7.2 as we have cm 10.1 and cm 10 and may be we will get cm 10.2 also
Click to expand...
Click to collapse
you're right but we need to learn....
imre85 said:
you're right but we need to learn....
Click to expand...
Click to collapse
oh yeah.. of course
anyway great work
imre85 said:
he still working on a cm 7.2 ......maybe after
Click to expand...
Click to collapse
cm7.2 ? That's amazing news. I tried to port it but it didn't work out as I expected. Good luck with building @loxdegio
Sent from my GT-S7500 using xda app-developers app
daniel98 said:
cm7.2 ? That's amazing news. I tried to port it but it didn't work out as I expected. Good luck with building @loxdegio
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
i think he's working only on a cm7 kernel...
mon_iker said:
Wow! First under volting kernel for ace plus. Is UV + OC stable?
Click to expand...
Click to collapse
Yes! Everything is stable and tested for some day before to be released (it's the aim of Test Builds ) But I have to manipulate directly code in sources in order to apply UV 'cause our device platform doesn't have the voltage controller
If I made mistakes i'm sorry, but i haven't practised my English for 3 years (4 this year) I'm a little rusty
downloading ProbleM,,,
bro, i am unable to download your kernel from any of the links given bro.... i am very exicited to use your kernel but i have tried alot to download your kernel but i am unable to download it....i have tried almostevery link u have given..!!!!!!!!
hoping for new working link!!!!
Gurtej Sandhu said:
bro, i am unable to download your kernel from any of the links given bro.... i am very exicited to use your kernel but i have tried alot to download your kernel but i am unable to download it....i have tried almostevery link u have given..!!!!!!!!
hoping for new working link!!!!
Click to expand...
Click to collapse
there you go
and i would like to report that with this kernel i m getting real slow int connection almost nothing by the way that your rom Aces_Droid_Plus is an art peace :good:
so... this works with any GB based ROM?
and are there any bugs?
P.S. well im testing it now with inspiration v17.1 and it works very well... but there is a big problem. Some apps that require SuperUser acces just don't work; for example "Seeder" app from that rom asks for permission but the app says the device could not be rooted properly. For the moment is the only app that has this problem with this kernel but there could be more
ShadowsDie said:
so... this works with any GB based ROM?
and are there any bugs?
P.S. well im testing it now with inspiration v17.1 and it works very well... but there is a big problem. Some apps that require SuperUser acces just don't work; for example "Seeder" app from that rom asks for permission but the app says the device could not be rooted properly. For the moment is the only app that has this problem with this kernel but there could be more
Click to expand...
Click to collapse
Well the problem is only with this app and i found somenthing in the "Seeder's" thread.
some people have the same problems using custom kernels and a guy says that the kernel developer has to make a frandom fix.
well i don't know what is that so i can fix it myself :laugh:
Does this kernel have any bugs?
Sent from my GT-S7500 using xda app-developers app
These builds are based on CM-12.0 nightlies with features cherry-picked from many sources including crDroid, SlimKAT, Omni, LiquidSmooth, Carbon, Nameless, Beanstalk etc.
All credit goes to @temasek for the rom. I just compile for the Moto G
Code:
#include
*I'm not responsible for your phone bricking, cat dying or aliens invading.
*Accuse me of anything and I will laugh at you.. No kidding.
FEATURES
Code:
Disable scrolling cache
Heads Up Notifications
Configurable lockscreen shortcuts
Clock alignment
Network traffic meter
Status bar weather
Launch Superuser from Settings
Launch SuperSU from Settings
Navigation bar height
Enable/disable VOLUME rocker wake
Setting: add app move to external storage
Settings: allow home button to wake device
Settings:DPI Settings/Display density
DOWNLOADS
ROM
Use any 5.0.x GApps you want. I recommend these.
INSTALLATION
-Full Wipe
-Flash Rom
-Flash Gapps
-Flash the latest SuperSU Beta for root access.
-Flash Donkey Kang kernel (XT1033 to GPe converted users to prevent SystemUI FC)
-Finally reboot and wait for hours.
CREDITS
@temasek for the source, permission and a lot of other stuff
CyanogenMod
Anyone else I will have forgotten.
XDA:DevDB Information
Temasek Unofficial CM12 builds, ROM for the Moto G
Contributors
rudi_j7, temasek
Source Code: http://www.github.com/temasek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 12
Version Information
Status: Beta
Created 2014-12-29
Last Updated 2014-12-30
30/12/2014 (v3.6)
-Fix settings/display FC
-Merge CM changes from their gerrit
Reserved for screenshots. Not.
I may try
Sent from my moto g using XDA Free mobile app
What a good ROM to port for Moto G !
Thank you very much @rudi_j7 (Reconized Contributor )
Downloading
dual sim ?
Hopefully CM 12 support dual sim xt1033,
Wow, Nice man, i always wondered about Temasek's builds,but haven't had a device to try it out. Maybie we could get offical support for his builds
Will try it out ASAP
deyerick said:
Hopefully CM 12 support dual sim xt1033,
Click to expand...
Click to collapse
Probably in the future. Not right now.
DeHuMaNiZeD said:
Wow, Nice man, i always wondered about Temasek's builds,but haven't had a device to try it out. Maybie we could get offical support for his builds
Will try it out ASAP
Click to expand...
Click to collapse
I think he only supports devices that he has, officially. So it will probably remain unofficial for the Moto G.
Sent from my A0001 using XDA Premium 4 mobile app
CDMA/Boost Mobile?
Is it working with CDMA? (Data, mms, calling)?
Slayer1822 Jr said:
Is it working with CDMA? (Data, mms, calling)?
Click to expand...
Click to collapse
This is straight off the CM source. If it works on CM, it works here.
Sent from my A0001 using XDA Premium 4 mobile app
Tried The ROM.. works well
bugs are as same as CM12 based roms
im having 1033 gpe converted. initially got systemUI FC flashing Donkey Kang Kernel solved the FC issue
opening display settings gives unfortunately, settings has stopped
Thankyou for the ROM #Temasek
@rudi_j7 i got a bug, settings FC when i go to settings>display,no big deal as i can change my brightness out of settings but it's a thing.
But this is my absoulute favourite ROM so far. It's great. Maybie you could be an offical maintainer for the moto G?
DeHuMaNiZeD said:
@rudi_j7 i got a bug, settings FC when i go to settings>display,no big deal as i can change my brightness out of settings but it's a thing.
But this is my absoulute favourite ROM so far. It's great. Maybie you could be an offical maintainer for the moto G?
Click to expand...
Click to collapse
Can you provide logs for the display FC? I've had this issue on my OnePlus One too.... Want to see if it's a generic problem. I've asked @temasek before building these. So these are technically sort of official builds not built by him
Sent from my A0001 using XDA Premium 4 mobile app
rudi_j7 said:
Can you provide logs for the display FC? I've had this issue on my OnePlus One too.... Want to see if it's a generic problem. I've asked @temasek before building these. So these are technically sort of official builds not built by him
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ill try to get a log when i finish working,no probs okay then
https://www.dropbox.com/s/5695uov2fbybjiw/2014-12-30-15-09-22.txt?dl=0here's the link to the Logcat, bare in mind this is my first time to take one, so please tell me if this is good or i did nothing. I hope i helped
DeHuMaNiZeD said:
https://www.dropbox.com/s/5695uov2fbybjiw/2014-12-30-15-09-22.txt?dl=0here's the link to the Logcat, bare in mind this is my first time to take one, so please tell me if this is good or i did nothing. I hope i helped
Click to expand...
Click to collapse
Perfect! Thanks. Looks like the same issue like that on bacon. I'll see what I can do.
Sent from my A0001 using XDA Premium 4 mobile app
rudi_j7 said:
Perfect! Thanks. Looks like the same issue like that on bacon. I'll see what I can do.
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
https://github.com/temasek/android_...mmit/e703931f787acc805c14361472ca21e7bdff2890
he already fixed it.
xpirt said:
https://github.com/temasek/android_...mmit/e703931f787acc805c14361472ca21e7bdff2890
he already fixed it.
Click to expand...
Click to collapse
Wasn't following his git today. Great! I'll run a fixed build today then
Sent from my A0001 using XDA Premium 4 mobile app
Currently uploading a build with everything fixed. Works nice and smooth.
EDIT: New build up. Grab it while stocks last.
Sent from my A0001 using XDA Premium 4 mobile app
About RockZ1L : http://forum.xda-developers.com/sony-xperia-z1-compact/development/5-0-rockz1l-kernel-t3101784
This is a personal build of rockz1l with some modifications :
* Bump kernel version to 3.4.110 (include most patches from upstream)
* Add UKSM(Ultra Kernel Same-page Merging), better than the original KSM approach.
* Add f2fs support. You can follow this tutorial to convert your partitions to f2fs : http://forum.xda-developers.com/xpe...rial-migrate-filesystem-to-f2fs-ext4-t3004755
* Add sdcardfs support
* Enable TCP Hybla
* Modified and built with Hyper Linaro ARM-EABI 5.1
* Add cifs and nfs modules
* Replace tuxera exfat with exfat-nofuse (the module fakes itself as a texfat module)
* Add Paragon UFSD
* Disable vermagic check for kernel modules
The kernel is for stock lollipop rom. Only tested on 14.6.A.1.236
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fYkYxWGpldEMtb1E&usp=drive_web
Sourcecode : https://github.com/maz-1/android_kernel_sonyz_msm8974
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel?
Sent from my D5503 using xda premium
Frunzdoedel said:
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
I think Taiko Audio Codec Control and qpnp-vibrator are already in RockZ1L kernel.
Frunzdoedel said:
Good to see another kernel choice for our device.
But i'm missing the taiko audio control from sharonlius kernel?
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
I'm far away from a developer, but mayby you have a look at:http://forum.xda-developers.com/showthread.php?p=60428881??
Sent from my D5503 using xda premium
Amazing
Nice work:good:, thanks OP and which governer do you recommend for performance and good battery life?
baris27 said:
Nice work:good:, thanks OP and which governer do you recommend for performance and good battery life?
Click to expand...
Click to collapse
Alucard/ noop / and deadline for sd ext..
And alucard CPU Hotplug.
Is the best choice for performance/battery live for me (a little bit UV too)
?
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
dennis46419 said:
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
Click to expand...
Click to collapse
I haven't tried since I'm not currently on stock, but I notice the download folder says 'Z1l_Z1c', but all the files only say 'Z1l'. I wonder if he removed Z1c files...
Yes thats right.. I dont See IT
What Rom You Use?
Well i flahed the zl folder on my z1 compact and it works very well
On Stock Rom?
@maz-1,
i want to ask you if you have an idea why i can t overclock my device
i can t apply 2.4 GHZ frequency.
does it have to do with SE linux ?
Sorry, no idea when i tried this kernel i had no problem to apply 2.41 GHz with kernel auditor. But i prefer http://forum.xda-developers.com/showthread.php?t=3096060
[KERNEL][Z1C][5.0-5.1][F2FS] Advanced-Kernel v16.0[11/16/2015]
Sent from my D5503 using xda premium
Frunzdoedel said:
Sorry, no idea when i tried this kernel i had no problem to apply 2.41 GHz with kernel auditor. But i prefer http://forum.xda-developers.com/showthread.php?t=3096060
[KERNEL][Z1C][5.0-5.1][F2FS] Advanced-Kernel v16.0[11/16/2015]
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
same thing happens with this kernel also
broky said:
same thing happens with this kernel also
Click to expand...
Click to collapse
Mayby your device is very special? ?
Sent from my D5503 using xda premium
broky said:
same thing happens with this kernel also
Click to expand...
Click to collapse
Are other signs of the kernel showing up, (additional governors, etc.)? Maybe it's just not flashing right.
levone1 said:
Are other signs of the kernel showing up, (additional governors, etc.)? Maybe it's just not flashing right.
Click to expand...
Click to collapse
yes,everything seems to appear as it should,except the highest frequency..
broky said:
yes,everything seems to appear as it should,except the highest frequency..
Click to expand...
Click to collapse
Never heard of it... I know that the original Rockz1 kernel comes with an app called 'pimp my Z1c' or something like that. Maybe you could pull the app out of the zip and install it, see if it shows anything different.
levone1 said:
Never heard of it... I know that the original Rockz1 kernel comes with an app called 'pimp my Z1c' or something like that. Maybe you could pull the app out of the zip and install it, see if it shows anything different.
Click to expand...
Click to collapse
already tried this,same result.
anyway problem seems to be solved using trickster mod
dennis46419 said:
Flash with twrp dont work unsuported device?!?
Bootloader is unlockt
Whats wrong?
Thx
Dennis
Click to expand...
Click to collapse
run "getprop ro.product.device" in recovery. Does it give you "amami" or "D5503" ?
UNIVERSAL SUPER FAST MOD Ultimate Performance Blazing Fast Speed On The GoUltimate Performance is a Mod that *will* combines many scripts and tweaks in one package.
The goal is to improve Android System's performance, smoothness, reduce GUI lags
and of course some useful battery life improvements and tweaks !
DISCLAIMER :
I'm not responsible for any damage, brick, silent alarm or nuclear attack on your phone !
Be careful and make a backup before if you're afraid !
Click to expand...
Click to collapse
DEVELOPMENT THREAD
This is the development thread of this mod.
If you want to test new feature, or want to contribute to this mod, this is the place.
DON'T TALK ABOUT BUG IN STABLE RELEASE HERE ! LINK TO STABLE
GIT LINK : Beta
GIT LINK : Stable
Click to expand...
Click to collapse
Merging list :
Merged
Working on
Will be
Maybe ?
Pure Peformance X(Golden Edition) by Jeeko - link
Adrenaline Engine by ImbaWind
TweakZV6 by [email protected]
Broadcom Booster by jynprojects
Fly-On Mod by slaid480 - link
LagFreeV3 by slaid480 - link
Pureâ„¢Graphics HD by Jeeko - link
Huge Thanks to the devs of these mods!
Click to expand...
Click to collapse
Known bug :
Bootloop for some devices (probably a lot)
=> uninstall and wait fix, please upload log if you can https://github.com/sohamxda7/-UNIVE...mance-Blazing-Fast-Speed-On-The-Go-/issues/10
Probably won't work for CM based rom, i'm working on it
Click to expand...
Click to collapse
Direct downloads
v10.0.4
v10.0.3 - Bootloop
Uninstaller
Click to expand...
Click to collapse
WorkFlow informations for new contributors :
If you're good with git : Fork https://github.com/storm1er/-UNIVER...ate-Performance-Blazing-Fast-Speed-On-The-Go-
Then create pull request & issues as you want, we will review your code before merge
2016-12 :
v0.3 :
- We restarted this mod from scratch because of multiple reason, the big one is that most of those mods can't work correctly on new android version, and therefore, most executable were out to date.
- PPX (Pure Performance X) already contains AE (Adrenaline Engine)
- We "just" update some binaries and *tada* bootloop for a lot of devices .-.
v0.4 :
- Rebase PPX & AE, no more bootloop on STOCK 6.1, only sqlite3 has been PIE updated (+arch specific)
- Only PPX stock version, i'm looking how to install stock and CM version from the same script.
Redone uninstaller :
- Bad deletion removed
- Lib files will stay even after uninstall, could be used by other mods
reserved
Nice one
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
Nice one
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Bootloop but nice xD
I'm on it, looking for stock PPX test & update ... that nice too see people looking at their phone (android 5+) telling Yay it works, my phone is faster ...
But almost none of binaries are PIE so they can't be executed on their devices ... only script and files tweaks can work :/
EDIT : v0.4 updated
On my Oukitel K6000 Pro
score antutu before : 37024
score antutu after : 38580
Got bootloop on uninstall had to restore /data & /system
V4 safe to flash?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
V4 safe to flash?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
try it
as this is beta thread for testing
Trying V0.4 on my samsung note 2 unfortunately my device bootloop... waiting fix for it.
Try v10.04 and I got bootloop
Device redmi note 3 snapdragon
Rom aosp extended 2.0 Nougat 7.1.1
Kernel Radon 3.4
Sent from my Redmi Note 3 using Tapatalk
so uninstaller is not working?
cm13 on lux (squid kernel) is booting ok, but it is still not good for daily driver
at least phone got snappier, but stability is more important for me
thx for supporting
MuradDA16 said:
Trying V0.4 on my samsung note 2 unfortunately my device bootloop... waiting fix for it.
Click to expand...
Click to collapse
febry_valdy said:
Try v10.04 and I got bootloop
Device redmi note 3 snapdragon
Rom aosp extended 2.0 Nougat 7.1.1
Kernel Radon 3.4
Click to expand...
Click to collapse
I used PPX stock version so if you are using CM based rom, it can't work for now.
But if one of you are on stock, can you send logs on github ? (On issue, you will see "bootloop on 10.0.4") thanks
otavioricciotti said:
so uninstaller is not working?
cm13 on lux (squid kernel) is booting ok, but it is still not good for daily driver
at least phone got snappier, but stability is more important for me
thx for supporting
Click to expand...
Click to collapse
CM ?! You are lucky, it is not supposed to work on CM yet.
As for me, uninstaller make my device bootloop, I probably miss something :/
Updated uninstaller :
No more bootloop, I was deleting /system/bin/dnsmasq -.-
I also deleted deletion of lib files, could be used by others mods.
How to tell that it's working?
Sent from my SM-N930F using Tapatalk
It's Working on htc 802d dual sim stock kernel 5.02
Using stable v8 b1
Does it eat up lot of battery?
Sent from my Lenovo K3 Note using XDA-Developers mobile app
it saves battery
Can someone post a screenshot on the init.d folder, pls.? I successfully installed the mod but my init.d folder has only one file. TIA
Sent from my SM-N930F using Tapatalk
So far unsuccsesful with 0.4. Flashed but stuck on boot. Uninstaller also failed.
Reinstallng ROM
CM 14.1 beta
Wysłane z mojego Xperia Z przy użyciu Tapatalka
drumbeater79 said:
How to tell that it's working?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Try antutu benchmark before & after. v10.0.4 isn't complete yet so there is only small difference. Scrolling should be less laggy (very noticeable on low end device).
v10.0.4 isn't improve battery much, i didn't gain much time on this one compared to v8 :/
---
xlinkprince said:
It's Working on htc 802d dual sim stock kernel 5.02
Using stable v8 b1
Click to expand...
Click to collapse
v8 b1 isn't supposed to be beta
Please talk about it HERE
---
ash001 said:
Does it eat up lot of battery?
sohamsen said:
it saves battery
Click to expand...
Click to collapse
Click to expand...
Click to collapse
---
drumbeater79 said:
Can someone post a screenshot on the init.d folder, pls.? I successfully installed the mod but my init.d folder has only one file. TIA
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
What file does it contains ? (names)
---
ddarek65 said:
So far unsuccsesful with 0.4. Flashed but stuck on boot. Uninstaller also failed.
Reinstallng ROM
CM 14.1 beta
Wysłane z mojego Xperia Z przy użyciu Tapatalka
Click to expand...
Click to collapse
This isn't supposed to work on CM for now ^^'
---
@sohamsen : I will continue dev in 2017 now, so beta will stay like this for now.
Everyone feel free to contribute HERE (declare issues, pull request, code review, ...) if you want to
stormPremier said:
Updated uninstaller :
No more bootloop, I was deleting /system/bin/dnsmasq -.-
I also deleted deletion of lib files, could be used by others mods.
Click to expand...
Click to collapse
is the same 03 version?
Enviado do meu Moto MAXX