Database Info

how to root xolo a800 after jellybean update 4.1.1 update

Hi all,
I have a xolo a800 . i was able to root it when i got the phone using bin4ary root method as i had ICS on the phone.
However after updating the phone i am not able to rrot the phone using the same method. I do have the recovery image for the xolo a800 but i really dont know how to root the phone. i tried the SP tools method but my phone doesnt do anything after i do the write memory. i guess im missing out on the scattered file and also the hex values.
Can somebody please help me with a step by step method for rooting the xolo a800 with official jellybean update ( not ICS xolo a800).
Im eagerly waiting.
Thanking you in advance....plzzzzzzzzzz !!! :laugh::laugh::laugh:

uys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done

Stock jelly bean rom
Siddhartha9964 said:
uys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
Click to expand...
Click to collapse
Hi,
Can you pls provide the stock 4.1.1 flashable zip? I really need it. I downgraded my phone to ICS. I cant seem to find the stock 4.1.1 anywhere. The stock roms on some websites says its 4.1.2 but after downloading it and checking the build.prop, its ICS. Please?

Xolo 4.2.2 custom rom released
Hey I have ported JB 4.2.2 for our device with the help of Vipul Verma. It has no bugs and works flawlessly. Reply back if you want the link.
& hit thanks!
I will be posting a complete guide on how to flash it but if you know how to do it then reply to this post asking for the link!

[Q] Karbonn A2+ ROMs and CWM?

Hello all.
I'd like to know if there's any custom roms for Karbonn A2+. I'm already guessing the answer is a "No" so I'd like to know if/how I can port any rom with JB firmware and any CWM to my device (Please tell me what rom should I take to port
The device runs on 4.0.4 ICS, with 1ghz 256mb ram, and a 4" WVGA capacitive touch screen. I've rooted it via Framaroot and am using an additional 1gb of swapped ram.
Thanks in advance.

Bump, is there anyone who can point me to the correct guide to follow?

Your phone?
What is your phone?
I mean what phone are you using?
the model and the brand?

I'm facing the same problem.
hardware config.of a2+are- mt6575 with kernel 3.0.13
brand- alps , model- A2+

hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2

shantz said:
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
Click to expand...
Click to collapse
Interesting, could you please dump the rom?
"Jellyfish"?

Root & cwm for karbonn a2+
It is a simple procedure, but it took long time for me to make it work.
Points to consider
a. After flashing my phone didn’t boot. I just flashed only the recovery, I think that would caused the problem, later I re-flashed the stock rom boot img separately).worked !
b. Instead of backup copy I tried with the stock rom imgs, It worked for me. If you don’t want to lose any data please use your phone backup copy img files.
c. I am not a developer & don’t know how the stuffs work inside the mobile, with the help of XDA contributors & developers forum messages, I was able to do something.
d. Please do read the rooting & flashing guides thoroughly.
e. Please don’t panic if something goes wrong. Stock rom is available, flash it & you get your mobile back.
ROOTING & BACK UP
1.Frama root will give you the root rights ! - http://forum.xda-developers.com/showthread.php?t=2130276
Download & Install - open it choose install super user, then click "boromir" success message will appear, click ok and reboot your phone. You can see a message "android is updating" after you reboot your phone.
2. Dowload MTKdroid lastest version (older version also fine)-sorry I couldn’t find any working links
Backup your stock rom using MTK droid tool, before making any changes to the stock OS. MTK droid tool may ask you to root again. Please read rooting and flashing instructions thoroughly before doing any changes.
a. Install MTKdroid tool in your pc & open it, If the tool asks you to root, click root, in couple sec or mins yellow signal will turn green.
b. Click on the “Root,backup,recovery & then click backup – Please wait till the process completes
If the message says “end with error” – The backup copy will not help us to re-flash the OS
(I tried many times, but I am not able to flash the backup copy with SP flash tool, gives me some error.
(for making CWM the above copy is fine, because I hope there won’t be any error when the software creates a backup for boot.img & recovery.img)
c. Ok assuming that there is no error, the next step is Click on the button “To prepare blocks for Flash tool” – wait till it completes. This process will gives us the entire copy of the rom to flash it with SP flash tool – Can find the backups in MTKdroid tools /backups/ Karbonn-A2+_number _date_backup_ folder/file to flash tool. (MTKdroid tool is required to create CWM, so don’t close the MTKdroid tool)
d. No stock roms were available when I was testing that time, so I ended up with the service center. Thanks to XDA member “Forever Alone”. Now working stock rom is available.
3.CWM CREATING & PORTING
a. Select “To choose the boot.img file & click recovery & boot. Software will ask you to select the boot.img. Select the boot.img from the backup copy in MTKdroid tools /backups/Karbonn-A2+_ _backup_ /file to flash tool.
b. Click Yes - To make CWM automaticllay
C. Click yes - If phone isn't loaded, it is ness to flash this file...to phone? Software may show a write error, just leave it for now.
e. Click NO - Install created recovery to phone ?
Copy of the recovery & boot img will be in MTKdroid tools /recovery
Now CWM has been created & that needs to flashed via SP flash tool
4. Flashing CWM recovery
Download SP flashtool - http://forum.xda-developers.com/showthread.php?t=1982576
Copy the scatter file from Mtkdroid backup folder to mtkdroid recovery folder to avoid confusion in selecting the image files.
Open SP flashtool – Select the scatter file from mtkdroid recovery folder & flash it. You are done. Now you can see the auto made CWM instead of stock recovery
attachment has screen shots-please refere that to this section
5.Download the stock rom from - http://forum.xda-developers.com/showthread.php?t=2520719
Extract the files & store it in separate folder.

Any custom rom for karbonn a2+
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..

hi.. im using karbonn a2+ mtk 6575 device .i downlaod lewa os for karbonn a11 as same specification of karbonn a2+. but installed that succefully. but stuck in boot logo..but im not ported this rom.i just change boot image only.. what is the problem??

hi bro im mtk developer. we can port rom for a2+
Sent from my Karbonn A2+ using XDA Free mobile app

hi
Sent from my Karbonn A2+ using XDA Free mobile app

i ported two roms
ViKtory36 said:
Bump, is there anyone who can point me to the correct guide to follow?
Click to expand...
Click to collapse
hii

Custom ROM
Guys I found an awesome website for Getting custom ROMs for almost all karbonn and celkon devices try it..................
h t t p://androcustomroms.com/

Can you tell me step by step how to gain root access to karbonn A2?
Sent from my HTC Desire 616 dual sim using XDA Free mobile app

[email protected] said:
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
Click to expand...
Click to collapse
can you please post here the cwm recovery image for karbonn a2+ here..

My karbonn a2+ show this while installing
E:signature verification failed
Installation aborted.
what to do now?
It doesn't work with any ROM.

Unbrick Android

Hi Friends I rooted my phone some days ago and today i tried to install chainfire3d but something went wrong during installing a driver from chainfire it rebooted and then stuck on samsung logo.. I can go to download mode and recovery mode but cant boot... i Think it's bricked... Now Please Friends give me step by step procedure to UNBRICK my phone..
My phone is Samsung Galaxy Pocket Neo Duos S5312 India...
Samsung Galaxy Pocket Neo Duos GT-S5312
OS:- Jelly Bean
Android Version:- 4.1.2
Baseband ver:- S5312DDAME4
kERNEL vERSION:- 3.0.15-1189709
[email protected] #1
Thu May 9 19:54:31 KST 2013
Build No:- JZO54K.S531212DDAME4
Please give me Step by Step process nof Unbricking my Phone... Thank you in Advance...

www.am27 said:
Hi Friends I rooted my phone some days ago and today i tried to install chainfire3d but something went wrong during installing a driver from chainfire it rebooted and then stuck on samsung logo.. I can go to download mode and recovery mode but cant boot... i Think it's bricked... Now Please Friends give me step by step procedure to UNBRICK my phone..
My phone is Samsung Galaxy Pocket Neo Duos S5312 India...
Samsung Galaxy Pocket Neo Duos GT-S5312
OS:- Jelly Bean
Android Version:- 4.1.2
Baseband ver:- S5312DDAME4
kERNEL vERSION:- 3.0.15-1189709
[email protected] #1
Thu May 9 19:54:31 KST 2013
Build No:- JZO54K.S531212DDAME4
Please give me Step by Step process nof Unbricking my Phone... Thank you in Advance...
Click to expand...
Click to collapse
what kind of recovery is it? the stock recovery it came with or a custom recovery like TWRP or CWM?

Rep Unbrick Android
Trozzul said:
what kind of recovery is it? the stock recovery it came with or a custom recovery like TWRP or CWM?
Click to expand...
Click to collapse
its stock recovery... I dont know what CWM, TWRP recovery is....
BTW Thanks for a fast reply.

the method
i know your problem dude this exactly same happen to me it happen because we are trying to install chainfire 3d in jellybean ,,ohh dude chainfire 3d is not for jelly bean or ics thats it corrupts system image
bro if u are new then you should know what is custom recovery it gives the full control for ur recovery means you can instal rom in ur phone with that recovery like installing windows i computer
HOW TO INSTALL CWM RECOVERY IN YOUR PHONE
I. Before You Begin
1. As always, back up everything you care about from your device before you start.
2. Charge your device to 75% or more before you begin.
3. Make sure you have the necessary drivers installed before you begin. If you are not sure, install Samsung Kies that should take of care of things for you.
II. Necessary Downloads
1. Odin_v3.07.zip
2. CWM-recovery-s5310-ODIN.tar.md5 [Link available on Step #2 of this post]
III. Flashing the Custom Recovery
1. Extract the Odin_v3.07.zip file you downloaded above to a folder on your desktop.
2. From the extracted folder, double-click on Odin3 v3.07.exe to run the tool.
3. Put your device into Download mode. To do this, power down your device, and press and hold the Volume Down + Home + Power buttons until you enter Download mode.
4. Click on PDA button, locate CWM-recovery-s5310-ODIN.tar.md5 you downloaded above and click on OK to load it on Odin. The ID:COM field on Odin should now light up yellow to signify that your device is connected and recognized properly. If not, reinstall Samsung Kies and try again.
5. Make sure that the Re-Partition and Flash Lock are unchecked; this is important as you might brick your device if these options are ticked!
6. Click on Start.
7. Once done, reboot your device.
You now have ClockworkMod Recovery installed on your Galaxy Pocket Neo!
and after download stock rom for ur phone and install it
.
.
.
.
go there [/B][/QUOTE]
if u dont want this mess up , just go to service center and spend some money
and if u like my lines please say thanxxx nd like my page fully tweaked on facebook

well I m confused at first i have to do flash of CWM custom recovery and then stock ROM? ? ? ? ... i saw in some videos and some tutorials they said direct ROM flash i mean no CWM direct flashing with stock ROM using ODIN... Also can i try oneclick unsoftbric will it work? ??
after flashing CWM will it work i mean will it unbrick... ? ? or i have to flash with stock ROm after that..
Also my phone is Galaxy pocket neo duos Gt s5312 not s5310 however both have same configuration but will it safe to do i.e. :- flashing with s5310 cwm recovery with s5312... ?

Try to flash direct to stock ROM download from samsung-updates / samfirmware with GT S5312 device
With Odin 3.7
hope this will normalize your phone.

Hey....now i am facing the same problem with my GT S5312 due to that Chainfire3D. so, did u get solve it? Help me up bro please.

request of stock Rom for CELKON a118

hi firends i have celkon a118 . i changed my phone osrecently. i need the stock rom can any one help me please?

surendra204 said:
hi firends i have celkon a118 . i changed my phone osrecently. i need the stock rom can any one help me please?
Click to expand...
Click to collapse
no one is here to help? please upload the stock rom if any one has this phone.

hello friends finally i have managed to flash my celkon a118 with stock rom. I am writing the procedure to some one who is needed. I am staring this post as assuming that you have minimum idea of how to flash your phone. if not please search about basics. please undesstand that i am not responsible for any damage to you phone.
1. downloaded many stock roms none of them are worked. finally i downloaded from the android xda site.
here is the link http://xdafirmware.com/celkon-a118
2. install drivers. i face bit difficult in this aspect. it is easy to install pdanet software in net and connect your working phone to pc.
3. In the firmware file there is a mtk flash tool. if you are comfortable do that or try sp flash tool.
4. while flashing you will get checksum error. the solution is delete checksum file and flash now.
5. the checksum file is in the downloaded file>flashtool>sp>checksum.ini(configuaration file)
6. flash now better to use firware upgrade. once i tried flash all and download then my imei is failed then i write my imei with mauiMETA software.
thank you and enjoy.:good:

Micromax Canvas Xpress 2 E313 Lollipop Recovery/Unlocked Bootloader/Fixed Kernel

Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313​Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.​
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel​​​
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App​
.

Reserved

error
abhimortal6 said:
reserved
Click to expand...
Click to collapse
not installed...pmt change for this rom..must download this

Working but after installing i "Revoke USB debug authorization" got vanished
Revoke usb debugging authorization is vanished from my developer menu. And i am not able to connect ADB anymore.
It just not asking for any authorization anymore. I tried all adb drivers also pdanet. Still nothing.
I know it's sounds stupid. I mean how can a recovery effect such things.
Right now i need help... Please

oem unchecking is what plese tell me i don't know how to do flash using sp flash tool
oem unchecking is what plese tell me i don't know how to do flash using sp flash tool. after loading scatter file unchecking boxes or not to do. i m getting pmt change error. and my device is getting disappear

try to flash another rom
#aam_aadmi
https://drive.google.com/file/d/0B9tb9NtbHirvMFMtd1ZMczNiRjQ/view?usp=sharing
try this link . copy paste this link into another tab. u hv to flash custom rom or port another rom like emui .. stock rom is hard to get root..

My device was not booting after flashing the Lollipop patch. I had to flash the entire ROM.

Recovery have big issue
1.) I found that philz recovery does not work at all my device when flash via mobile uncle tool device screen becomes white after reboot and when i remove battery and power on then mobile bootloop on logo
2. while flashing with sp flash tool say pmt change error
3. and when upgrade firmware mob become bricked
is there wrong with preloader in stock rom. Is it tested or not
or is compatible with T03 ver 5.0.1 lolipop rom named as (firmware 5.1 mmx e313 unlocked) which have i download

monuamitonline said:
1.) I found that philz recovery does not work at all my device when flash via mobile uncle tool device screen becomes white after reboot and when i remove battery and power on then mobile bootloop on logo
2. while flashing with sp flash tool say pmt change error
3. and when upgrade firmware mob become bricked
is there wrong with preloader in stock rom. Is it tested or not
or is compatible with T03 ver 5.0.1 lolipop rom named as (firmware 5.1 mmx e313 unlocked) which have i download
Click to expand...
Click to collapse
Select Formatt all +download in sp flash tool[emoji1]
Sent from my E313 using XDA-Developers mobile app

1st step
pavanbarod said:
not installed...pmt change for this rom..must download this
Click to expand...
Click to collapse
Unlock Bootloader first

sir how can upgrade android lollipop to andrid marshmallow in canvas xpress 2

WE can also flash a custom recovery for Xpress 2 through Rashr Flash tool..........I'm going to make a tutorial on it.........We just need the recovery.img file nd its done..

plz tell how to unlock bootloader of micromax canvas xpress 2
plz tell how to unlock bootloader of micromax canvas xpress 2

abhimortal6 said:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313
Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App
.
Click to expand...
Click to collapse
in rooting process is the touch screen recovery will come after patch download....
and can my mobile turn on normally after installing this patch file without installing zip file....

Anuj47 said:
in rooting process is the touch screen recovery will come after patch download....
and can my mobile turn on normally after installing this patch file without installing zip file....
Click to expand...
Click to collapse
abhi g tell me please.....

abhimortal6 said:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313
Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App
.
Click to expand...
Click to collapse
abhi g kya zip file ko recovery mode me sp flash tool k sath install ni kiya ja skta?
agar ha to kaise?

ajeet_singh said:
plz tell how to unlock bootloader of micromax canvas xpress 2
Click to expand...
Click to collapse
did you get this?

abhimortal6 said:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313​Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.​
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel​​​
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App​
.
Click to expand...
Click to collapse
hey Abhi I downloaded your app. It is very helpful. Thankyou for making that app. I have the custom recovery now. But when I opened the stock rom option nd tried to download , it showed error 404. Please fix the error or provide a link for stock recovery of both the variant.