I want to flash a Cm rom into my phone, I followed all the steps until it showed
Could not detect file system for dev/block/mmcblk0p8 assuming ext4
mount: failed to mount dev/block/mmcblk0p8 at /system : Block device required
ApplyParsedPerms: removexattr of system/xbin/zip to 0 failed: Operation not supported on transport endpoint
set_metadata_recursive:some changes failed
Hello and thank you for using XDA Assist,
please tell us, which device you are using:
svetius said:
How to use this forum:
1. If you ask a question, please create a new thread and post your question with as many details as you can (device type, model, running custom or official rom etc).
Click to expand...
Click to collapse
Kind regards
Trafalgar Square
XDA Assist
Related
Hello Community!
I've lurked on these forums for what seems like forever, I remember when only about 6 phones were actually supported here, but I've barely ever posted before because I've always found the answers I needed kicking about somewhere.
This time I can't.
I have an old Pola200 that I am giving to my poorly wife largely as a media player, and I'd like to put Android on it, to give her a taste of the excellent OS I use on my own HD2 (Leo) in preparation for eventually upgrading her aging Symbian based phone. She's a total technophobe, so giving her an OS that does not work will put her off the idea in the future.
I've searched these forums thoroughly, and there is a lot of builds that work fine on the Pola100, and the larger posts that try to collect all functioning builds together get a little confused by folks asking unrelated questions, and others not actually reporting whether their phone is Pola100 or Pola200.
All I am after is a simple build, either method, NAND or Haret that works fully on the Pola200 that I have. I'd prefer Haret because there is a piece of winMobile software she's fond of, but I can talk her into using an android version if it's neccessary.
Please can someone simply point me to a fully functional build for the Pola200?
Come on folks, even a simple "No" would help over 100 views of this post and no replies at all? Please?
Nobody there?
NAND (Best speed) setup:
For your android distro I recommend Fresh Froyo on NAND. You can get it below.http://sourceforge.net/projects/androidhtc/files/2011-1-23-froyo/
For your NBH, I recommend DZO's latset nbh. Pick a polaimg one. On Pola200 Panel 2 or 3 should work fine (if not you can try panel 1), and use a 240x320 one for Fresh Froyo. You can get the NBH below.
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
And please check this thread if your Wi-Fi isn't working after install. It is below.
http://forum.xda-developers.com/showthread.php?t=820683
If you ABSOLUTELY need a haret setup, ask me and I'll upload a custom-made set. I hope you find this information useful.
so this Android NAND will work with XDA orbit 2 as it's Pola 200.
quick question are all these supported with this release
- 3g Sim card (3UK network) supported with this.
-camera.
- GPS
- wireless
- bluetooth
Apppreciate your help.
tri
pl0ppy you are awesome, thanks very much. I'll check and see if this works as soon as I can (computer and health troubles to get sorted first).
I'll let you know if I really need the custom setup, but if android works reliably and well on the phone, I can see me being ble to convert her totally away from winmob and on to Android.
Thanks again for the help, once again XDA Devs community Rocks!
=pl0ppy
Click to expand...
Click to collapse
Code:
usb_function_register() 'adb'
thats all =((
but i see the tux =))
i've O2 Orbit 2
what can i do?
bootlog.txt
Code:
** /dev/block/mmcblk0
** Phase 1 - Read and Compare FATs
Attempting to allocate 3773 KB for FAT
Attempting to allocate 3773 KB for FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
Next free cluster in FSInfo block (14526) not free
Fix? yes
8 files, 3805060 free (951265 clusters)
sh: 0: unknown operand
mount: mounting /dev/block/mtdblock2 on /system failed: Invalid argument
mount: mounting /dev/block/mtdblock3 on /data failed: Invalid argument
mount: mounting /data/tmpcache on /cache failed: Invalid argument
mount: mounting /data/shared_prefs on /shared_prefs failed: Invalid argument
mount: mounting /data/tmpcache on /tmp failed: Invalid argument
mount: mounting /data/sysfiles/su on /system/bin/su failed: No such file or directory
mount: mounting /data/sysfiles/su on /system/xbin/su failed: No such file or directory
mount: mounting /data/sysfiles/su on /bin/su failed: Invalid argument
mount: mounting /data/sysfiles on /system/etc/ppp failed: No such file or directory
mount: mounting /data/sysfiles on /smodem failed: Invalid argument
I change the display on my O2 =((((((( that is a problem????
install-seq.sh & radio
pl0ppy said:
NAND (Best speed) setup:
For your android distro I recommend Fresh Froyo on NAND. You can get it below.http://sourceforge.net/projects/androidhtc/files/2011-1-23-froyo/
For your NBH, I recommend DZO's latset nbh. Pick a polaimg one. On Pola200 Panel 2 or 3 should work fine (if not you can try panel 1), and use a 240x320 one for Fresh Froyo. You can get the NBH below.
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
And please check this thread if your Wi-Fi isn't working after install. It is below.
http://forum.xda-developers.com/showthread.php?t=820683
If you ABSOLUTELY need a haret setup, ask me and I'll upload a custom-made set. I hope you find this information useful.
Click to expand...
Click to collapse
and which install-seq.sh file should i use. where do i get it from
also which radio should i use?
Hello, everyone
I'm trying to use root in my samsung galaxy pocket GT-S5310B, but I'm having some troubles. I used towelroot, in the first time it works, but after remove some programs root (like supersu and super user), I get the following error in adb shell:
Code:
$ su
Connect ui: Timer expired
So, I stuck here. I don't know what to do. Do you have suggestions?
gugarthur said:
Hello, everyone
I'm trying to use root in my samsung galaxy pocket GT-S5310B, but I'm having some troubles. I used towelroot, in the first time it works, but after remove some programs root (like supersu and super user), I get the following error in adb shell:
Code:
$ su
Connect ui: Timer expired
So, I stuck here. I don't know what to do. Do you have suggestions?
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Here's another method to root:
http://forum.xda-developers.com/showthread.php?t=2365697
Also, you can look through the threads here:
http://forum.xda-developers.com/t/galaxy-pocket
Good luck!
Evolution_Tech said:
Hi, thanks for using XDA Assist!
Here's another method to root:
http://forum.xda-developers.com/showthread.php?t=2365697
Also, you can look through the threads here:
http://forum.xda-developers.com/t/galaxy-pocket
Good luck!
Click to expand...
Click to collapse
Thanks for reply, but it doesn't work. I got an error:
Code:
E: signature verification failed
Installation aborted.
gugarthur said:
Thanks for reply, but it doesn't work. I got an error:
Code:
E: signature verification failed
Installation aborted.
Click to expand...
Click to collapse
Here's another method:
http://forum.xda-developers.com/showthread.php?t=2433263
FYI, use the XDA search feature and type:
"Galaxy S pocket root" (without quotes) and you'll find several results.
Good luck!
I am trying to install Meefik's BusyBox for Linux Deploy, but when I run the installer it shows:
Remounting /system to rw ... done
Copying busybox to /system/xbin ... fail
Setting permissions ... done
Installing new applets ... fail
Remounting /system to ro ... done
.
Then when I go to SuperSU and view the logs, it says
"cp:write error: No space left on device" after the copying to /system/xbin failure, and
"Segmentation fault" after the installing new applets failure
Any help is appreciated!
Hi,
Thanks for using XDA assist.
I couldn't find what you were looking for. Instead, please create a XDA account and post here:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Hi all,
I have gained temp root access on a japan phone, able to obtain rw access to all files & folders except /system. Edited default.prop file on ro.secure and ro.debuggable to 0 & 1, did setenforce to permissive but still unable to write on /system getting mount: permission denied, is there any advice anyone can give please?
On a seperate issue, this phone does not have fastboot or recovery mode, attempted to dd a modified boot.img to the dev/block/xxxxxxxxxx folder of where the original boot.img was resulting a bootloop, wondering under normal circumstances when there is no fastboot or recovery mode, dd a boot.img should achieve the same flash result of using fastboot?
Thanks in advance!
Hello and thank you for using XDA Assist,
please ask in our Q&A section:
Android Q&A, Help & Troubleshooting
The experts there know the best and should be able to help you!
Kind regards and good luck
Trafalgar Square
XDA Assist
Hello community XDAdevelopers ,
I'm looking for help with my phone HTC ONE AT & T_ ( M7 ) , it stopped working and displays the following error:
E: missing bitmap oem_unlock_bg
(Code-1)
E: missing bitmap oem_unlock_bg_yes
(Code-1)
E: missing bitmap oem_unlock_bg_no
(Code-1)
Write host_mode success
handle_cota_install: Can't mount /sdcard, 1 times
handle_cota_install: Can't mount /sdcard, 2 times
handle_cota_install: Can't mount /sdcard, 3 times
handle_cota_install: Can't mount /sdcard, 4 times
handle_cota_install: Can't mount /sdcard, 5 times
I can managed through command line with BootLoader and unlock with the code that HTC sent me , however I can not load any ROM or RRU I downloaded
Descripcion:
***unlocked***
M7_UL PUT SHIP S-ON
HBOOT-1.61.0000
RADIO-4M.32.3218.06
OpenDSP-v35.120.274.0718
OS-7.23.502.1
eMMC-boot 2048MB
Mar 11 2015, 14:09:46.24069
Please if anyone can give me guidance on the subject, I so appreciate with that and if be a solution i can donating for the help. The phone will only work nine months
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
AT&T HTC One (M7) Q&A, Help & Troubleshooting
The experts there will help you.
Kind regards
Trafalgar Square
XDA Assist