Hi everyone i am working on flashing the sprint optimus s to verizon prepaid
Optimus s allready rooted and flash with Reborn Rom v2
I configure the phone on QPST with the configuration of my prepaid account exactly the same.
I Get to call 611 from my OPITIMUS S and automatically says my balance from my Verizon account but when I'm going to call someone it says the number is not activated.
So I need help!!! Am I missing one step or I need to configure something else? I try to call from the phone *22888 to activate it and it says I have to call customer service!
I got a Nexus S 4G that is currently activated on my account. It was previously flashed to Cricket, but only calling and texts work. It will not connect to a mobile network at all (aside from Wi-Fi). There has to be some reason it won't update profile to allow my phone to be provisioned. Any help would be greatly appreciated.
EDIT: It also won't let me update the PRL if that helps any.
Hi,
I bought the freedom pop nexus 5 phone. I was able to receive and make calls with freedompop sim. but signal was weak in my work area so I contacted their customer care to get it unlocked. when they unlocked the phone I was able to receive calls with my ATT sim but cant make calls.
I factory reset the device. when I reboot it is displaying Freedompop home page and asking to activate their service. it is not going inside.
always showing message: " Activation required" - this device is ready for activation. please press the Activate button to continue or visit freedompop.
When I enter into reboot mode ( pressing power button + down volume) it shows device is unlocked but still Phone asks to activate using FReedompop homepage.
Please guide me what steps should i follow to use it with AT&T. I am a newbie here . any help would be highly appreciated
Thanks,
msr
msrnexus said:
Hi,
I bought the freedom pop nexus 5 phone. I was able to receive and make calls with freedompop sim. but signal was weak in my work area so I contacted their customer care to get it unlocked. when they unlocked the phone I was able to receive calls with my ATT sim but cant make calls.
I factory reset the device. when I reboot it is displaying Freedompop home page and asking to activate their service. it is not going inside.
always showing message: " Activation required" - this device is ready for activation. please press the Activate button to continue or visit freedompop.
When I enter into reboot mode ( pressing power button + down volume) it shows device is unlocked but still Phone asks to activate using FReedompop homepage.
Please guide me what steps should i follow to use it with AT&T. I am a newbie here . any help would be highly appreciated
Thanks,
msr
Click to expand...
Click to collapse
In website, they talk about a host, to modify, have you done this ?
Because FReset only wipe datas, but don't reset root no ? Like this HOST file
Thanks Granopla... I am not aware of that. could you please guide me how to do that? contacting their customercare and getting the device unloked took me 3 days with so many calls ...device still shows unlocked but at the same time asks me to activate
So I bought the phone and a 35$ service card three days ago from Wal-Mart. Activated the phone around 3am that night. Phone hasnt worked once. No calling, texting or using data. Ive contacted ST CS numerous times with no help. Im told the same everytime. Dial *73 then turn off and back on, if that doesn't work repeat. Well it wont even let me dial * numbers. Pops up sim not registered, sim not provisioned, contact service provider. So whats what ive done. Yet they keep telling me my service and phone are active so they cant do anything. Ive seen a lot of people say to get an ATT sim and use that instead of the Verizon sim, and that will do the trick.
My phone number doesnt show up in settings. Network type doesnt. Cant edit or add or delete APN. PRL is blank in settings and no way to change it. Does anybody have any ideas or advice on what to do to fix all these issues???? I have 4 bars at all times but my service says 1x and yet i cant make calls or texts. Calls say im roaming and to buy a service card if I wanna make calls. Texts get stuck on sending then minutes later pop up they failed.
Rilynnsmamaxo said:
So I bought the phone and a 35$ service card three days ago from Wal-Mart. Activated the phone around 3am that night. Phone hasnt worked once. No calling, texting or using data. Ive contacted ST CS numerous times with no help. Im told the same everytime. Dial *73 then turn off and back on, if that doesn't work repeat. Well it wont even let me dial * numbers. Pops up sim not registered, sim not provisioned, contact service provider. So whats what ive done. Yet they keep telling me my service and phone are active so they cant do anything. Ive seen a lot of people say to get an ATT sim and use that instead of the Verizon sim, and that will do the trick.
My phone number doesnt show up in settings. Network type doesnt. Cant edit or add or delete APN. PRL is blank in settings and no way to change it. Does anybody have any ideas or advice on what to do to fix all these issues???? I have 4 bars at all times but my service says 1x and yet i cant make calls or texts. Calls say im roaming and to buy a service card if I wanna make calls. Texts get stuck on sending then minutes later pop up they failed.
Click to expand...
Click to collapse
Are you certain that you activated the device correctly and entered the SIM card number correctly when you activated the device?
Give me an accurate and descriptive breakdown of the exact steps you took when you activated the device and SIM.
BTW, AT&T SIMs are for GSM devices, not CDMA devices, if your device is a Straight Talk device, your device is a CDMA device. I doubt an AT&T SIM will help.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Are you certain that you activated the device correctly and entered the SIM card number correctly when you activated the device?
Give me an accurate and descriptive breakdown of the exact steps you took when you activated the device and SIM.
BTW, AT&T SIMs are for GSM devices, not CDMA devices, if your device is a Straight Talk device, your device is a CDMA device. I doubt an AT&T SIM will help.
Click to expand...
Click to collapse
I mean, I'm assuming I did everything right lol. I followed the steps the ST website took me thru. Phones brand new, never been activated. Brand new sim. I went to the website, chose activate, chose I have a ST phone, input my zip, input IMEI, input SIM #, input service pin, created my account, updated profile settings, restarted phone. The app says my service is active, the website says its active, ST CS says its active on their end. But I can't call or text or use data. My network type is 1xRTT. I have 4-5 bars at all times. When I try to call regular numbers, I get a "you are roaming, to place calls please purchase a service card" or something along those lines. When I try to call *73 like ST keeps telling me, it says sim not registered, sim not provisioned, contact service provider.
My phone is broken and all I have is this Boost Mobile LG G Stylo (LS770). I poured through the logs from ADB and eventually got the MSL. I know it works because it lets me access menus now that previously prompted me for a code. Problem is when I put another carriers SIM in it it just says 'Invalid SIM'. I can't figure out for the life of me where to enter the MSL for carrier unlocking. Everything I've read says you need the MSL for unlocking. I was messing around with this Kyocera Kona flip-phone and I got the MSL for that too, but with that phone you can do ##THEMSLCODE# and it will let you edit MDN / MSID. Both the Kyocera and the LG are locked to Boost Mobile and I don't have Boost Mobile anymore. If anyone could point me in the right direction of what carrier unlocking consists of I'd be really appreciative. I am not 100% clear on exactly how mobile networks authenticate or how you tell them to try to communicate with one carrier's network over another.
Any help would be awesome because if I can't get either of these to work in the next week or so I am going to lose my service.
Also, what exactly does DIAG mode do?