Change IMEI of Huawei stick - possible ? - General Questions and Answers

Hi,
we have a problem in Germany. There is a service with unlimited mobile lte traffic (no speedstep down), but the provider has bound the service to a special router with imei fencing.
The problem is that the router is a faulty (high pings, often disconnects, high cpu usage, low quality antenna ports (no way to get under -6 dB rsrq)) mixture of three routers. One smartphone cpu, one very old lte router (B880) and a VDSL router.
In order to use the unlimited lte sim into a another huawei stick, its neccessary to change the IMEI of the stick to the IMEI of the special router.
Is that possible ?
Best regards
redfox245

someone claims in a youtube video that it is possible youtube.com/watch?v=65w01LCHUbo
that he has written a tool for such a task - havent had luck to find a way yet...
any progress on your side?

You will find no help here. Changing the imei is illegal in many places (as are any tools. To do so) and as such all talks are banned on xda.

Related

Wifi and GSM quick questions....

Hello,
I have had my PDA Universal now for a week. I have changed it to GSM so it doesnt go onto GPRS, and give me a huge bill. I only want to connect via Wi-fi and only when the Wifi is available so that is not a problem.
What I would like to know is, when I connect via Wi-fi, either in my house, work or Uni, there is no cost by the GSM Service Provider, which is O2 in this case.
Another question is I have changed the setting to dial a 0845 (national rate) number in England for a internet connection when I am desparate, but will I get charged the Mobile network rate for an 0845 number or will this be treated as a data transfer and at a different rate?
Many thanks... I know these may seem obvious to some, bu not to me, as I am very new to PDA's..
Jimmy.

[Q][App Request] cell network ownage info

Hope someone can help with this request/question
I'm currently on a PAYG network in the UK (ASDA) but this company is a 'virtual' network using one of the bigger network companies (currently they are using the Vodaphone network)..quite soon they are moving to EE (Orange/T-Mobile) network which would NORMALLY not be a problem except.....
I work in a factory & mobile signals in plant is rather 'sketchy' the best of times... the Vodaphone network seems to have the best signal there & this is why I chose a provider that uses this network. When they (ASDA) move to EE I'm worried that I will start losing signal strength etc & so I'll may be forced to find another provider
Now onto my question/request..
I was thinking that IF I could scan the area I work (i.e the factory) & find what cell towers are around, & what strength they are THEN find out WHO those cells belong to (as in - whether it's O2/EE/Vodaphone that owns them) I should have a good idea If the EE network will still work in plant & I won't have to start looking for another provider..
...If they aren't any good - I could find out which company DOES have the best signal in plant & then have to move to that provider instead
I know I could just use my phones 'network scan' to see who's 'around' but this doesn't show how strong their signal is
I could also go out & get a free PAYG sim from each company & put it in my phone & see which give the best reception
and I know there are apps that will show 'Cell Info' (some show quite detailed info that completely 'gobble-gook' to me ) but none that I've found tells me WHO the cell belongs to
So - Is there such an App (preferably free) that anyone can suggest that will allow me to.....
> Scan the available cells in my area
> Find out their signal strength
> and MOST IMPORTANTLY which network company (O2/Vodaphone/EE etc) OWNS that cell
It also has to be 'simple' to understand.. all I want is an app that shows how many cells in the area, how strong the signal is for each cell & a name of the company that the cell belongs to
Many thanks in advance

manual network search on CM11

Hello. Since approx. beginning of April I experience serious problems using cm11. What I mean:
- in poland we have a gsm carrier called p4. They have a small own network which covers main cities. This network is used by p4 to provide gsm and internet services.
- p4, to provide gsm services outside the cities, let it users to use national roaming, using ALL networks availiable (3 diffferent carriers)
- when in national roaming, internet services are not provided at all ( only gsm)
Now the problem: I live in a city. I need internet services all the time. So till April I've used manual network search, i.e. I used to choose P4 and it worked perfectly. For several moments during day (i.e. in tube) i had no signal of P4 but it was not a problem. After a moment the phone did connect to P4 again.
BUT NOW something has changed. I choose P4 manually but when I loose signal the phone connects again not to P4 but to the network with strongest signal (usually t-mobile). And it does not return to P4. So I have NO INTERNET AT ALL TILL I'LL MANUALLY RECONNECT to P4.
What happened? Is it a bug or is it intentional change in cm11? Is there a way to manage networks the old way? I'll be grateful for help cause this situation is extremly annoying.

Comunicate without standard network.

13I find myself with a few phones handed down to me, and I am often in areas where there in no mobile phone network available,
I am curious as to weather or not these Android phones (on which I have gained root access) could be perhaps booted to a system that allows communication directly between the phones instead of via the non available mobile network.
If I remember correctly, an article I read some years ago described an open source project designed to offer telecommunications using the transceiver in each phone to create a network for areas that had no other available network.
If anyone could point me to some information on the above described network, or just using these as "walkie talkies" I would very much appreciate it.
I was not able to find much in the way of relevant information, but Wikipedia says,
Developments
Some cellular telephone networks offer a push-to-talk handset that allows walkie-talkie-like operation over the cellular network, without dialing a call each time. However, the cellphone provider must be accessible.
Motorola has IDEN cellphones (e.g., i867) that can have 15 conversations over each of 10 900Mhz channels (see Moto Talk) between compatible cellphones without using the cellphone network or a base station. This is very useful outside the range of a cellphone provider as well as reducing network charges.
Click to expand...
Click to collapse
Smartphone apps
A variety of mobile apps exist that mimic a walkie-talkie style interaction. They are marketed as low-latency, asynchronous communication. The advantages touted over two-way voice calls include: the asynchronous nature not requiring full user interaction (like SMS) and it is voice over IP (VOIP) so it does not use minutes on a cellular plan. Applications on the market that offer this walkie-talkie style interaction for audio include Voxer, Zello, and HeyTell, among others.[7] An application that offers this style of interaction for video is Glide.[8]
Click to expand...
Click to collapse
Nothing in this seems to be what I am looking for.
have you tried restarting your phone? my phone sometimes crashes and restarting works perfectly, try it seriously
There may be apps that provide Walkie Talkie like functionality over Wifi, but I think you need to distinguish what you are doing over wifi, bluetooth, and cellular. I'd go with one of these. You might even be able to setup some kind of mesh-based network using wifi - depending on the area you are trying to cover.
iDen and other carrier based PTT solutions are based on connectivity to cellular networks, and won't help you here. Additionally, most GSM networks are not outfitted with native PTT functionality. You are best working with Local Area Networks (LANs, like WiFi) or Personal Area Networks (PAN, like bluetooth)
WiFi and Bluetooth operate on spectrum which is unlicensed and available for public use - with some restrictions, such as power output and the like. Anything you could coax out of WiFi or Bluetooth should be fine.
Cellular, on the other hand, is an entirely different breed. Cell networks are generally regulated and licensed by relevant government authorities. Trying to setup your own cell towers is likely illegal in most countries without licensing or regulatory approval - with a few exceptions, like carrier sponsored micro cells. That would include tampering with the cellular radios in most devices.
3234
Yes,,, the legal issue is something I had not yet considered and you make some important points.
It is likely that even if I find the information on the project I mention above I will not be able to do anything other than learn a little from it, that's OK.
You mention IDEN as being carrier based, as far as I can tell IDEN is one of the few that is not.
From my previous quote
Motorola has iDEN cellphones (e.g., i867) that can have 15 conversations over each of 10 900Mhz channels (see Moto Talk) between compatible cellphones without using the cellphone network or a base station. This is very useful outside the range of a cellphone provider as well as reducing network charges.
Click to expand...
Click to collapse
There is more info on this at this site .wikipedia.org/wiki/MOTO_Talk ( need to make more posts before I can give a link ).
I do however note that some carriers do not allow this feature to be used, or limit its use.
MOTO Talk also works only on some specific Motorola phones, reading between the lines there seems to be some hardware as well as software that is unique to these models.
I'm most interested in the open source project ( I think it was open source ) that I read about some years ago, perhaps it is on SourceForge?
I have trouble finding a useful search string for Google, any suggestions?

Data quality app?

So, I have S9+ Duo with two sim cards.
I would like to use the Data from the card 2, but very often it doesn't work. It is a virtual provider in Austria. I've called their support and they are claiming that not such thing can happen, because they are using the best and strongest network in Austria(and they really are), but often I don't have any data on the phone and I am offline.
Is there an app what would monitor when I don't have an internet, so I can present it to them? Measuring signal strength and if I am online or offline?
Thank you.

Categories

Resources