I have and ascent m8 7 stuck in bootloop after upgrading from 331 to 511. the phone got in a bootloop eversince and cant come out. My phone is stock never been rooted etc. i have access to volume - + power menu but i tried cache cleaning and factory reset still nothing. i have access to force upgrade but after i get to 5% it says software update failed no matter what version of full firmware i use. If anyone can advise it would me greately appreciated. Also i have tried all the solutions offered in the other threads but nothing worked
hoping for a fast reply and solution
Nikos
Why you update from b331 to b 511???
Try transition pack do downgrade
Send frome globe
Related
Hey guys.
I'm new in the Android world and bought an LG G2 back in november.
I had originally intended to custom install cyanogenmod or KitKat 4.4 to replace stock rom, but I couldn't find a way to install a custom recovery, and was only able to root my device via Kingo Android Root.
A while later I saw an update that popped up, and not knowing any better I clicked install. It was about 114MB. That was about 3 days ago, and my LG G2 has been stuck in a bootloop ever since.
When I try to turn it on the LG logo shows up, then it says "secure booting error"and "Cause: boot certification verify" on the top left corner of the screen in white text.
I tried doing a hard reset, but that didn't work. I don't have a custom recovery so that I can clear the cache and data or something. So pretty much I have a bootlooped phone with no custom recovery, I can't do a hard reset, and it's Sprint and everything's new so it's harder to find a fix.
Does anyone here know of a way I can fix this? It would be much appreciated.
Thanks in advance
Hello everyone,
i have a problem with a Honor 6 from a friend. The phone has an Unlocked bootloader and was rooted.
Then my friend received an Update Notification on the phone and he has done that update. I have said before, that this won't work and it will brick your phone. But i don't know why, he made the Update.
Since then the Phone stucks on bootloader with the "Honor" Logo" AND the LED Notification is blinking first 1 x Red and then 3x in Green. This blinking is repeating 2 or 3 times then only the Honor Logo stays on the screen.
The Phone can access fastboot mode, but not the recovery mode (Volume Up + Power) or the 3-Finger-Mode, to install a stock rom from the sd-card. We have flashed a lot of Roms with the Multitool in the Unbrick Mode, but nothing works, still the same.
Our Problem is:
- We don't know on which version the Phone was before the Update. We know only that it was Kitkat with 4.4.2 and Emui 3.0 --> Maybe this is important for downgrade?
- After the update, he couldn't turn off the phone. So, the phone stayed on until it turned off by itself.
-> When we wanted to enter recovery mode one day later, the screen showed up an Icon with red flash, like the battery was empty.
--> the battery was completely empty because of not turning off -> We charged the battery by connecting the empty battery to another Honor 6 mainboard. After that the icon didn't show up but we still can't enter recovery mode or 3-Finger-Mode.
What can we do now? Every solution would be appreciated.
Thanks in advance
Same problem here. Any hint?
medusa_gorgona said:
Same problem here. Any hint?
Click to expand...
Click to collapse
Until now, i haven't found a solution
works only while charging
seems same is the case with me after updating , it only works when its being charged else only the honor screen and shutting down
me to have same problem
I forgot to say i have an L12.
The only thing that has worked for I have tried is to flashing TWR for emui4.0 from Multitool.
But ROMs and OTAs at this thread are not prepared to be installed via recovery.
I guess I could use an L12 backup to be restored at TWR, if someone can tell me where can I download it.
I want to try everything with stock roms before I try with custom ones.
P.D.: sorry for my bad english.
Finally, I managed to work again.
The steps I followed (keep in mind i have an L12):
Using Multitool -> Unbrick, I extracted the imgs from the B535 ROM
At Stock recovery, I made a factory and cache reset.
I flashed USERDATA from Fastboot
This worked for me.
I hope it helps
i am using l04 and i'm have same problem bro..
Hi guys,
as it has been almost a week I am trying to fix my phone, I am running out of ideas and asking you for help !
As I mentioned about a week ago without a reason my phone has shut down ( it was used as a gps on google maps and was a bit hot).
Since the it was stuck on on huawei logo and restart over and over(boot loop).
I started with factory data and reset, which went smothly i guess(it has changed language to Chinese) but didn't help to start the phone.
I have tried then to flash stock rom( tried 3 i have found ) from memory card in dload folder. Phone will only start updating when usb cable is in - without it wont, and keep flashing logo and restart.
Unfortunately none of the roms installed properly, all hang up on nearly end(98-99) %.
I tried to follow procedure then with Honor Multi Tool - after extracting images BOOT, CUST, RECOVERY, SYSTEM tried to upload them to my phone, but cannot write anything on the phone, which brought me to FASTBOOT& RESCUE MODE, which I am able to turn on, but it says my phone is LOCKED and until is unlocked I am stuck...
I went to HUAWEI website to apply for unlocking code, but among IMEI and SN there is also needed Product ID which you can obtain by sending a code in your phone. since I cannot turn my phone on, I cannot get my Product ID...
I have emailed huawei regarding this, but without luck.
The battery is fine and charging to 100%.
Android 4.4 with Emotion UI 2.3.
Can anyone please HELP..!!!
Follow this procedure to flash official Stock firmware package:
Download your phone firmware on which you were previously on.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
After doing this put the UPDATE.APP in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
It's stuck at the ASUS logo. A friend gave it to me to fix since it wouldn't download apps from google play which led me to believe that it had software problems so I decided to update it. It's worth noting that it kinda bricked itself after factory resetting before the current brick. It wouldn't boot and it was stuck at the ASUS logo, but somehow it fixed itself after several reboots. After it fixed had itself, the problem with not being able to download apps was still present. One time I turned it off and it wouldn't turn back on. I tried to go into recovery, but then I realized that the recovery was gone too. It was stuck at "no command" screen, so the only way to modify the files was through the bootloader. I found a firmware zip with the .bin files in it, so I flashed them one by one and I got the recovery back. Installed the update via a good sd card and it was stuck at the ASUS logo. I sideloaded it through recovery and got the same result. I also tried sideloading it through the bootloader which also gave me the same result. I'm all out of options I can think of. If anyone has any idea, please share it.
Thanks in advance!
Hi !
I see that you have posted here as well https://forum.xda-developers.com/an...oot-method-t3311752/post71149052#post71149052 and that`s the best section from where you can receive more help , keep an eye on it
Good luck !
Hi everyone,
Someone asked me to fix his phone and i'm stuck. The S7 is crashing randomly (black screen) and after a crash, it cannot be booted until the battery is dead (even by pressing power +home or power + vol-) and charged again. I don't know how to fix it and i'm stuck at this point.
Here is the story behind it :
The phone wrote the famous "moisture" message and then won't boot up. He never put it in water. So he put it in rice but it didn't work. The owner of the phone took it to a fixing store in Thailand where they changed the battery. After a day, the phone crashed and we send it to Samsung Thailand who told us a high cost without explanations so they didn't fix it and we got it back.
Hopping someone can help me about this problem :angel:
Update :
A deep-clean flash () got me stuck into "no command" and pushing vol+/vol-/home didn't change anything, it just bootlooped.
So then i tried installing TWRP 3.1.1, it's a success but after installing LineageOS 14.1 and booting the phone crashed at bootlogo and won't boot up again...
Another Update :
I finally managed to get it working saturday, but it crashed just today and it's the same. It crashed in a lightweight app with no app running in the background. I'm thinking of a material problem :/
New update, still hoping someone know how to fix this:
I tried to flash stock firmware over and over but it keeps crashing at the end of the boot animation... I'll try an oreo firmware, hope it'll fix it