Hello, guys. I am new arround here and I need guidance for soft unbricking an Samsung SM-G9250. First time I tried to install Gapps but it was stucked. after that I tried TWRP 3.0.0 and 2.7, I tried different firmware versions, but nothing. Now when I tried to instal via Odin 3.10 the original firmware, it's not working. Can someone help me out to do something with this phone? The only way it`s going to come up is download mode.
Related
hi all, I'm trying to upgrade to KK with a stock/official fw; linky via odin 3.07. I am able to flash successfully, the tablet restarts and then just sits at the Samsung "blue oval thing"
I've tried TWRP touch 2.8.0.1 to install Gnabo 6.5, following instructions of Here, using "Installation for N801x". All has gone as expected until I tried to install the bootloader section, TWRP crashes to bootloop each time.
I've tried re-downloading the bootloader as well as clean flash of KK and using CWM touch 6.0.3.6 in place of TWRP; same result.
I have a backup of 4.0.something, but i want 4.4.2. Any suggestions are welcomed, TIA.
check bootlader version
daniel302010 said:
hi all, I'm trying to upgrade to KK with a stock/official fw; linky via odin 3.07. I am able to flash successfully, the tablet restarts and then just sits at the Samsung "blue oval thing"
I've tried TWRP touch 2.8.0.1 to install Gnabo 6.5, following instructions of Here, using "Installation for N801x". All has gone as expected until I tried to install the bootloader section, TWRP crashes to bootloop each time.
I've tried re-downloading the bootloader as well as clean flash of KK and using CWM touch 6.0.3.6 in place of TWRP; same result.
I have a backup of 4.0.something, but i want 4.4.2. Any suggestions are welcomed, TIA.
Click to expand...
Click to collapse
Did you flash the Leaked n8000 firmware that Changes the Boot-Loader to the knox boot-loader. If so i think you have to flash a 4.4.2 zip with Mobile odin as it does not do a Boot loader check. There are several threads about 8010 Devices STUCK Into using the n8000 firmware only. Then you have to apply the no cell and wifi fix patches. I do not have a 8010 mine is 8013 so i do not have this issue and have not read totally up on it. It just seems this could be your Trouble.
Good Luck
Thanks Erica_Renee,
I've read about this issue in a few threads, I didn't feel it affected me as my bootloader screen
View attachment 2968202
doesn't show anything about Knox.
but, as I'm short on options; why not. So you're saying go back to 4.0.whatever, install mobile odin and flash KK N8010 rather than through odin on desktop?
problem with up rom
Hi guys,
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_u ser_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Thanks
Hey im sure that this is my fault. But i odined back to mk3 on my p3113 (tab 2 7.0) and rooted with cf auto root. Worked fine i have root. Flashed android andis twrp 2.8.7.2. Im able to boot into twrp but everytime i flash a zip the recovery just restarts. Then i tried philz touch and after flashing zip it fails and says (bad). Ive tried multiple zips. I could use some advice. Thanks
Update; Ive found that after odin my device is saying when failing to flash that device is expressorf rather than expressowifi. Thinking thats the issue, having trouble finding any other odin package. Could someone direct me to the usa package or tell me what im doing wrong. Also build prop says correct expresaowifi
Sigh.. 12 hours later... Im a dumbass. P3110 and P3100. Mixed up the files
Hey XDA Devs,
I have an old S2 on which I was trying to downgrade Android from CM12.1 to CM11.
CM12.1 had somehow installed it's own recovery console; using which I couldn't have flashed CM11, so for installing CM11 I tried to flash "CWM-KitKatCompatible-i9100" using ODIN 1.85.
The flash completed successfully but then my phone died. It doesn't even get into download mode or recovery mode anymore.
Also, while installing CWM, I flashed the PIT file "omap4_all_20110627_emmc.pit" as it was instructed on http://forum.xda-developers.com/galaxy-s2/general/how-to-root-install-cwm-recovery-flash-t1814801.
Is there any way to revive my phone?
I've already tried jig, even that doesn't work.
I need to get some data from my phone. Even if that's possible somehow?
Thanks,
- V
Hello Dear ,
If ur device get to booted to downloading mode i suggest u to flash stock rom with factory fw through odin here is 2 link for that rom
4.0.3
http://www.mediafire.com/download/etttzxwacsv3dg8/Galaxy+S2+i9100+Full+Factory+Rom+4.0.3.docx
4.1.2
https://mega.nz/#!LEF1AYqB!lMr2S90aZY_MChswC2pLdX4Zva11K6WVG9_WA8yNdNg
For how to flash it here some screenshots ,
https://www.google.com/search?q=how...ved=0ahUKEwj1696-mb_JAhWENxQKHVkTAb0Q_AUICCgE
Last chance for u if this not working for u then only one way 100% it's should work its via box like z3x box on any service center near u ok ..
Hope this will help You,
Thank You ,
Hey!
So im trying to fix a friends tab. N8020. Its in a bootloop ( cant acces recovery, only download mode)
I've read and tried every possible fix so far
- Flashed a lot of roms (stock,modded,cwm etc) (the flash itself is success but nothing happens)
- Used different cables and ports
- Disassembled it
I tried to do a kies emergency recovery but kies doesnt recognize the tab ( drivers are fine.)
Is there anything left to try?
thx!!
May I suggest you use Odin to flash a stock ROM?
If you can get it into download mode, use the stock ROM to refresh it to its factory state.
Links for the stock ROM can be found here. Depending on your country:
https://gsmarena24.blogspot.com/2014/07/stock-firmwares-roms-for-samsung-galaxy_6.html
Instructions on how to use ODIN to flash a ROM care found here. Just replace the ROM with the one you downloaded from above.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Hope that helps
- Flashed a lot of roms (stock,modded,cwm etc) (the flash itself is success but nothing happens)
Well that's probably made it worse .
Stock roms are posted on the forum and sammobile .com .
As above flash stock rom via Odin for your model and Note the point of failure in Odin .
Today tried to install custom recovery but it failed , now phone recovery not working but download is working.
I used this method https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
so downloaded offical rom and with odin when i install it i getting stuck in setup connection in odin
any help thanks
Update installed driver in another pc and this time odin worked out
issue resloved.
xtr33m said:
Today tried to install custom recovery but it failed , now phone recovery not working but download is working.
I used this method https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
so downloaded offical rom and with odin when i install it i getting stuck in setup connection in odin
any help thanks
Click to expand...
Click to collapse
Hi, you can try with this method, I worked, I had the same problem, trying to root with the new bases, if anyone knows what is the safe method of doing root to these updates?
Sorry for my bad English
https://forum.xda-developers.com/galaxy-s8/how-to/solution-g950f-fd-odin-recovery-t3638907