Database Info

GT-P5100 Firmware upgrade encountered an issue

Hi everybody, I tried to upgrade my GT-P5100 to 4.2.2 but something went wrong and now I have a black screen with this message:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably I have selected Re-Partition but I didn't have a PIT file
The tablet had the stock rom and was not rooted.
I have Odin 3.07 and this PDA file but the procedure fails:
P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't start Recovery or Download mode.
Can you help me?
Please if I need some more files write me all the links to download them, because many of them were hosted by hotfile and are no more downloadable...

"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
That´s the Black-Screen of Death! Downloadmode is on in this window Connect to your PC, Odin will get your device
There should be no Problem with the file itself "<OSM> Checking MD5 finished Sucessfully.." - bad download will give another output because the MD5 is not valid if it´s broken.
Make sure you uninstall KIES before using Odin and run Odin as Administrator !!!

Kies in installed and Odin is executed as administrator
So what should I do?

GT-P5100 restore stock rom firmware odin
SOLVED using this guide and this file

dylan6662 said:
SOLVED using this guide and this file
Click to expand...
Click to collapse
Hello, i have the same your prblem with my galaxy tab 2 10.1 !!!...
do you remember how you managed to solve?
Do you remember what was the file of "this link" (http://www.bergfiles.com/i/bf5bdebbf2hci0) that is no longer active?...
I have absoluty need !!
THANKS !!!

Still on trouble
I still can find the right link to download the necessary file to flash on my gt-p5100 like this case , my screen just still say "Firmware upgrade encountered......"
cant log into download mode
but still detect on odin
please help me.

Hi all. I have the same problem. A message "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help?

HELP HELP

andrezerotwo said:
HELP HELP
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...opment/odin-gt-p5100-4-2-2-stock-rom-t3022183
try this link, it is stock firmware.
further if it can't solve by just flashing firmware, you can try pit file. but be careful before flashing this with odin, be sure of what it will do, there are guides to explain the proper process.
http://forum.xda-developers.com/showthread.php?t=2552155

I have the exact same problem, tried different odin versions, flashed the stock firmware, also tried different pc's, but no solution.
this is the error I keep getting on odin, Tried Kies it says P3100 does not support initializing. A friend says maybe its a motherboard issue, is that possible or just a firmware problem? What should I do next?
This is the error I get in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

v1v14n said:
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi! With my tablet the same. I understand that eMMC has died, need a replacement and reflashing of the programmer.

GT-P5100 Firmware upgrade encountered an issu
Hi All,
I have the exact same problem with GT P5100, I cannot update my 5100,Itried different odin (1.85,307,309,1,7) versions, flashed different firmwares, but no solution.
this is the error I keep getting on odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMD1_P5100DBTDMD1_P5100XXDLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Many thanks in advance,

[Completed] Tablet stuck in downloading mode

Hey guys,
I've got a Samsung Galaxy Tab Pro and now i have a huge problem. I rooted it a long time ago and decided to install TWRP today via TWRP Managaer from Play Store.
I guess i did something wrong. After the app told me that the installation of TWRP was successful, i restarted the tablet. Now the screen says: "downloading, do not turn of the device". And i warted for about 1 hour and nothing changed. I cant event shut down the tablet. If I hold the Power key, it only restarts. The only thing i can do is go to ODIN mode.
But i am kind a newbie and i have no clues what to do now. Any help is welcome. Thanks guys.

Hi, thank you for using XDA Assist. You probably have to flash the stock firmware with Odin and start the process all over. Try here for help first, http://forum.xda-developers.com/gal...-how-to-root-install-custom-recovery-t3087451. Also see your device's forum here, http://forum.xda-developers.com/galaxy-tab-pro-12-10-8. That is the best place to get help in the future.

Hey, thanks for your help. I just tried to flash the stock firmware via ODIN. But it always says that it Failed.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T520XXUANI1_T520DBTANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried on differend USB ports and installed differend Drivers. I've no idea what i should do now.

Hi, the only other things I can suggest is to:
Re-download the firmware file and check its md5
It's good you tired different usb ports. Make sure they're the ones in the back of the pc and 2.0, not 3.0
Try different cables
Keep trying. Odin can be finicky. I've has it fail many times and then for some unknown reason it'll work.

Thread closed.

Desperate help needed with soft/hard bricked Samsung GT-N7000

I am new to Andriod world. I was trying to down grade GT-N7000 from Android 4.1.2 to ICS 4.0.4. With my bad luck during the process while device in download mode and ODIN started the cable accidently got unplugged. Since then I am not able to get in to recovery mode and it keeps flashing "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I tried that but no luck as it asks for recovery code..serial and model number entries did not work. However, it can still get in download mode so I tried reflashing with ODIN and following is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRK_N7000XXLRK_N7000ORALP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So that's where I am at this moment and hoping some of you experts can help me out to revive this phone. Please accept my advance thanks for taking the time to help.

Please help. Cant not unroot my sm s6.

Hi all,
I have Samsung Galaxy S6 G920F . I am trying to unroot my phone back to its factory settings. I downloaded the fimware and odin however i am getting below error message once i press the start in ODIN. I really dont have any idea what is going on. I tried different USB cables, frimware but didnt work out. Any help is highly appreciated . These are what i am getting ;
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar .md5 is valid.
is this version of firmware lower than the one curently instaled.
i had similar problem
it appears that is was on portugal firmware G920FXXS4DPG2_G920FOXX3DPD1_TPH (latest update of 109MB) and was trying to downgrade to G920FXXU3DPDP_G920FOXX3DPD1_TWO ,and was getting error ''cm sw rev check fail device 4 binary 3''
and smart switch failed because my it was trying TWO_CRO with lower verion.

[Q] Possibly bricked GT-N8010

Hey,
I was successfully running LineageOS on my GT-N8010.
However, it froze at one point and I force turned it off, and ever since I just get the 'Firmware upgrade encountered an issue' screen. However, I am still able to get into download mode.
I'm now wanting to get it back to stock so I can re-try LineageOS on it. I have the stock image but if I try to install through ODIN I just get an error(posted below) and also on the tablet I get SW Rev. Invalid magic string.
Any idea how I could try sort it out?
In the details section of the download screen it shows;
ODIN MODE
Product name: GT-N8010
Current Binary: Samsung official
System status: Custom
Log:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Odin requires TAR files not image .
Flash stock rom via Odin .
Sboot.bin fail means you are flashing firmware with an older bootloader than is currently on the device .

JJEgan said:
Odin requires TAR files not image .
Flash stock rom via Odin .
Sboot.bin fail means you are flashing firmware with an older bootloader than is currently on the device .
Click to expand...
Click to collapse
Edit:
Looks like I didn't have the latest version, tried a newer one but it now gets stucks and after about 5mins of trying it stops at system.img;
Logs:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1746 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Stuck on system.img means odin not recognized your system partition..
And or change USB port change usb cable .

Make sure that you have the least official firmware for your device and if it still fails,
it looks like a eMMC failure.
This problem is very common on the N80XX devices.
I already had to replace hundreds of eMMC's on them.