Hy,i have CyanogenMod-sprout and i lost in meniu radio,please help how to put back again to have in meniu interface radio?
Related
new problem
I upgraded my s200 to room 2.63.90 and now my phone is blocked. When i turn it on there is no radio rom version. In windows phone has no gsm signal, is very slow & orange led is on. I cant conect it to activeSync, i tried to load other version of radio or rom but...
damm, i have no lock with upgrading
please help
hjuuh,
it is back..alive
i went to bootlander and upload new rom
it would help if you post this stuff on the original thread, not all over the place !
http://forum.xda-developers.com/showthread.php?t=282066
Help!
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
SPEEEED said:
hjuuh,
it is back..alive
i went to bootlander and upload new rom
Click to expand...
Click to collapse
joyride said:
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Thank you for your help! I upgrade a new Radiorom 2.47.11 and it work well!
elantra_no1 said:
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Click to expand...
Click to collapse
My tornado:
C600, IPL:2.00, SPL:2.00.0008,GSM:4.1.13.28_02.61.1.
After flashed wm6, the GPRS only works for hours then breaks. to get GPRS back, i have to reboot my phone.
anyone has encountered the same problem?
benny856694 said:
My tornado:
C600, IPL:2.00, SPL:2.00.0008,GSM:4.1.13.28_02.61.1.
After flashed wm6, the GPRS only works for hours then breaks. to get GPRS back, i have to reboot my phone.
anyone has encountered the same problem?
Click to expand...
Click to collapse
Hi,
I had the same problems with Phil's WM6 Alpha. Tried lots of registry edits to fix it but found no solution. Havent tested Phil's beta yet but now using Andot's V4. And the GPRS seems to work. At least for the last 2 days I didn't have a single problem.
Can u post the verison of ur ipl, spl, gsm here? thx.
benny856694 said:
Can u post the verison of ur ipl, spl, gsm here? thx.
Click to expand...
Click to collapse
Hi,
My GSM is exactly the same version as yours.
I upgraded to Phil's Alpha at first which updated my GSM I suppose.
For IPL, SPL versions where should I look ?
r u using c600? hold the camera key and press the power key to enter 3-color screen where u can see ur ipl,spl.
benny856694 said:
r u using c600? hold the camera key and press the power key to enter 3-color screen where u can see ur ipl,spl.
Click to expand...
Click to collapse
I just remembered the screen when you told about holding the camera button. I can see it when I enter the bootloader screen. I turn off the phone, press the camera key, and while pressing I plug in the usb cable. My IPL and SPL is also the same : 2.00 and 2.00.0008 respectively. I am using an Imate SP5 by the way.
I just want to update my Qtek S200 to WM 6.1. But mixed, and took the files to the wizard WM6.1_Wizard_Professional_Rus_PolarLights_AKU_1.1 . Handset didn't power up normaly. Then I unlock cid and flash it with RUU_Wizard_1050402_101_11210_O2_ENG_Rus_CID_Button.exe
After that I got completely dead's phone. Clicking on the power button and blinks display and red and blue indicators, the phone is not power up, and not connect to PC. But powered up and works with the power supply.
Befor update was:
IPL 2.09
SPL 2.20.0000
OS 2.20.7.38
After update and unlocking cid:
IPL 1.01
SPL 1.01
Is any solution?
Anyone, help me!
if you want to download this rom , you got to look for it ! it make a long time it's avaible.
take kayser's rom
I update my IPL to 2.18 with ruu_JAMin_213923_2139122_022021_noskype_wwe_ship.exe soft, but handset don't work, don't power up. May be I erased the calibration data?
read pls
read pls...
http://forum.xda-developers.com/showthread.php?t=315016
hope this helps
I found a problem after I had flash a new rom and spl on my HTC Magic Roger 32A. I also didn't back up with nandroid recovery.
This is what I found,
Back button work as Menu button
Menu button work as Back button
Home button work as Search button
Search button work as Home button
green and red button is working collectly.
How can I fix it? Please help.
bik117 said:
I found a problem after I had flash a new rom and spl on my HTC Magic Roger 32A. I also didn't back up with nandroid recovery.
This is what I found,
Back button work as Menu button
Menu button work as Back button
Home button work as Search button
Search button work as Home button
green and red button is working collectly.
How can I fix it? Please help.
Click to expand...
Click to collapse
go back to your old spl and try other latest ROM?
I have had this happen a few times. I think I just back to my nandroid or reflashed. If not...try to use MyBackup and get a backup of your settings, wipe and reflash. Also, check the md5sum of the download.
Sorry for thread necro but I've been experiencing the exact same problem as this poster. I originally flashrec'd amon_ra recovery 1.2.3H and it was already working strange (menu was home button) but I went ahead and flashed cyanogenmod anyway and my buttons are still flipped. I tried flashing RA Ion and that didn't help. I tried flashing back to my backup recovery and I still experienced problematic buttons.
I just upgraded to an Engineering SPL and reflashed my ROMs and still, my buttons are flipped.
I have been trying to enter Mazaa's bootloader menu but couldn't. Combination of Vol Down + Power is not working. Please help.
Camera+Vol Down+Power maybe?
And when a screen comes press back.
So it´s on my omnia 7
D4rk_nVidia said:
Camera+Vol Down+Power maybe?
And when a screen comes press back.
So it´s on my omnia 7
Click to expand...
Click to collapse
This loads phone into USB mode.
Other ways please.
What mode are you trying to reach? Alternatively, what are you trying to achieve?
GoodDayToDie said:
What mode are you trying to reach? Alternatively, what are you trying to achieve?
Click to expand...
Click to collapse
I am trying to enter the bootloader menu. The three color screen.
The SPL screen (it's not really a menu, at least not on any of the other HTC phones). On the HD7 it's turn off the phone, then hold down the Vol Down rocker button while turning the phone on again, and don't relelase it until you get to the SPL screen.
Incidentally, this question belongs in the Q&A forum.
Hi,
If you've got the 7720.68 (or had it before you updated to 7740/8107) firmware, your bootloader's locked and you can't access the SPL screen. if you've got 7720.500 then you just press vol down and power on, and you can access the menu.
Sorry! What did you want to do?
abhilaksh said:
Hi,
If you've got the 7720.68 (or had it before you updated to 7740/8107) firmware, your bootloader's locked and you can't access the SPL screen. if you've got 7720.500 then you just press vol down and power on, and you can access the menu.
Sorry! What did you want to do?
Click to expand...
Click to collapse
I am sorry I called it a menu. I am new to all this. I want to access the SPL screen to know my SPL version. If the bootloader is locked as you said, is there a way to access it? or unlock it?
Your bootloader (SPL) version should appear under Settings -> About -> More...
GoodDayToDie said:
Your bootloader (SPL) version should appear under Settings -> About -> More...
Click to expand...
Click to collapse
And how can I know MID?
Please also tell how I can enter in SPL mode if I want to use DFT tool to instal HSPL. Since I can't use Vol Down + Power On combo to enter the SPL mode what should I do?
Please reply.
Please reply people.