I recently flashed the stock firmware in order to get the MM update but noticed that I didn't have any sound once inside a call. I tried reverting back to cm13 and even cm12 but I still have the same issue. This has never happened before, I'm thinking that it could have been caused by the stock firmware but I don't know. XT1540 1GB.
Related
Hey there everyone.
I flashed skullface's CM, and one of the bugs is that the vibration isn't working, which I am fine with, but later when I returned to stock firmware, the vibration still isn't working! I tried installing stock 4.1.2 and then upgraded to 4.2.2, still vibration isn't working.
I am pretty sure that it isn't a hardware problem since I don't remember dropping it before the problem appeared, and I am sure I did the flashing steps right. Any help would be truly appreciated.
strange,i i did flash skullface's cm in the past,and my vibration still work afterwards.
try flash again and do a complete wipe,see if it got any change,if not,i think you have to send it to service center(make sure you reset the binary count first)
I tried reflashing the stock multiple times after making sure I wiped everything, I can't return it to the service centre cause I bought it from another country.
OK, so I got Boost 1031 and I flash them to Verizon 1028 firmware so we can use them on PagePlus.
I have flashed sever with this great guide but yesterday after flashing I allowed it to take te 4.4.4 ota and it worked fine but no 3G. I tried a few things without luck and decided to reflash the 4.4.2 firmware through fastboot. Apparently partition changes and such make this not work well. I guess I'm now stuck with parts of each and I can't seem to get either one back complete.
Symptoms: Reboots every minute or 2 and no wifi service.
I've tried sideloading the 4.4. ota, installing it from recovery and I also installed CWM, rooted and flashed a couple 4.4.4 roms and still wifi not happening and very unstable.
I began with unlocked bootloader, but stock otherwise. I really want to get it back to stock 4.4.2 or 4.4.4
I'm no expert by any means, but no noob either...any help would be much appreciated. I guess when someone release a complete 4.4.4 package I may be ok. Maybe a kernel or radio would work but I haven't found any packaged radios for 4.4.2
Fastboot & recovery are very stable...I'm back on stock recovery now.
BTW I flashed another today for a friend and updated it to 4.4.4 and everything worked fine...even 3G! I think I had a setting wrong in DFS is why 3G would work on the f'd unit.
Moral...Don't try to flash 4.4.2 over the top of 4.4.4
Hey Guys,
A few weeks ago I flashed the phone with a "patch" that OPO sent me in order to debug some touchscreen issues.
That downgraded the phone to KK. After that I reflashed the firmware (05/15v) and a LP ROM.
My phone is behaving weird, so I wonder if I should flash another firmware and RADIO as well.
Any idea?
Thanks!
Could you further elaborate besides 'my phone is behaing weird'.
We can't really help if we don't know exactly what's going on.
OK so my gf n5 had issues on the ROM which was a lolipop ROM so we flashed stock image of 4.4.4 because it was the only one I knew would unpack correctly to flash... She has taken all the ota's and is now on 6.0.1 thru all the versions the issue is this: on regular call she cannot hear me, but if its placed with speakerphone or Bluetooth it works... Without nothing... I have even done a factory reset after all updates... No dice.... Any advice other than returning it(not possible) are welcome.... Thanks
Hi there!
I've been scratching my head around this for 2 days now and thought it best to ask for some help.
I have a Moto G Xt1032, Retail FR.
It has the bootloader unlocked and was converted to GPE months ago. The screen shattered about a month ago and it has since stayed shelved. This week I got and new screen but also needed for flash the firmware since I had a bootloop after trying to restore factory settings. I thought "fine, I had that stagefright update nagging me, mite as well" and decided to go back to stock. I changed the data partition and flashed stock, all is fine and dandy... Except I have no signal. I checked many radio threads and flashed both stock and gpe radios, to no avail.
Am I missing something? Anyone has any idea? I tried to flash both uk and fr stock firmware and have tried flashing radio lots of times (and wiped dalvik each time). Could it be an hardware problem? I can't seem to find anything like a strip for the antenna that could cause any problem...
For reference:
Radio - http://forum.xda-developers.com/showthread.php?t=2649763
Firmware - http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
Thanks!
Hi guys.
I just flashed GPE again (followed this -> http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522, as before) and it's fixed. Guess I'll stick with GPE? It's pretty weird that flashing radio on stock didn't do anything.