Disclaimer: I am not responsable of problems derivate of using the rom, I use myself, it worked great, and I shared it.
Hi, im posting here, a modified ROM by me based on the stock one, for the Bluboo Xfire, without almost any programs more than basic ones, and prerooted with SuperSU, and a fix of the Calendar Sync that isnt enabled in stock! And two estethic things: Doesnt have Bluboo power on sound, and bootanimation is from CM12
For flash it, google has a lot of videos (Or you can see the official rom instructions), but is simple, mtk (Mt6735) install drivers (Google it) (Check that are properly installed trying to boot in flash mode), uncompress the file, open SPFlash Tools with administrador, load scatter-file in the rom folder, disconnect battery, plug in usb in the computer, press download, and connect battery and wait.
It has to be flashed by SPFlash Tools (Included in the .zip) , because this phone hasnt have recovery yet.
The files are here: http://www.needrom.com/download/bluboo-xfire-custom-rooted/
Download and flash it
XDA:DevDB Information
Bluboo Xfire Custom Rooted ROM, ROM for the Android General
Contributors
kprkpr
Source Code: http://www.needrom.com/download/bluboo-xfire/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bluboo Xfire
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2015-11-26
Created 2015-11-26
Last Updated 2015-11-26
CUSTOM RECOVERY Carliv Touch CWM
BluBoo XFire Carliv Touch CWM recovery 6 v3.3
Android 5.1 5.0 inch IPS Screen 4G MTK6735M 64bit Quad Core 1GB RAM 8GB ROM
See: http://forum.xda-developers.com/showpost.php?p=64158985&postcount=27
Related
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
1.5mb custom rom?
DevSkilled said:
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
Click to expand...
Click to collapse
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
That is not Rom Zip
haykay2005 said:
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
Click to expand...
Click to collapse
Please Read : 1. a/b
Extract zip and open readme , you will find download link there.
And Kitkat Doge mod will be upoad tomorroe
Kitkat Pure Xperia IS ready And will be published Today
This rom is very beautiful and smooth. But front camera not working. Please make a fix patch...
Same problem is front camera not work with flash problem fix this
And
map
local
Not work
Unfortunately stopped app solve please
But thanks provide DevSkilledBug Fixed By : Marian Trinca new rom service 4 gionee
Fix please... Thank you very much !!!
https://www.youtube.com/watch?v=18PTh14Layc
Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from DownloadsN.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20
steps error?
Please check step1b and step 9, am seeing Touchwiz Rom. This is pure Xperia procedure. Any mix up?
bug free rom
very stable and sweet rom but my battery takes longer to charge. any solution?
deleted...
Change Charger
haykay2005 said:
very stable and sweet rom but my battery takes longer to charge. any solution?
Click to expand...
Click to collapse
Use Samsung Charger or Sony Charger
i was excited to know that there was an upgrade available for my device. and this ROM is more beautifull than i anticipated. Great Work.
it is 4.2.2 taking up more RAM than stock version i feel. i posted a feature request hope that you can add that. and also i dont know where is the USB debugging option in this ROM.
can not download any app from playstore.
DevSkilled said:
Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from DownloadsN.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20
Click to expand...
Click to collapse
whenever i try downloading an app from google play the error pops up. "can not b downloaded due to an error. (error retrieving information from server. [RPC:S-7AEC-7]) please help
Introducing pure Resurection RemixOS with Android 5.1.1 version 64 bit ( CM12.1 ) for Lenovo
A6000/Plus
ROM Author: Stuep D
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first, see tutorial here to upgrade it to Lollipop)
Install TWRP Recovery tutorial here
Download NEW Resurection Remix 5.1.1 ROM from here https://drive.google.com/file/d/0Bxq...VG8/view?pli=1
Installing Resurection Remix Cyanogenmod 12.1 on Lenovo A6000
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes) XDAevDB Information
RessurectionRemix 5.5.8 ROM for lenovo-a6000
ISSUES:
Some Apps force close upon restoration through Titanium Backup.
SOLUTION:
Uninstall those Apps and then install again from Play store or from other stores.
Contributors
Stuepd
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-01-16
This is LineageOS 13 for Vernee Mars.
You need to be on the stock MM firmware with TWRP in order to flash this rom!
I am not to be held responsible for bricked devices,you are flashing this on your own accord. BE WARNED!
Installaion:
1. Downlaod the rom and gapps
2. Flash the MM TWRP
3. Wipe the System, Data, Cache and Dalvik
4. Flash the rom and gapps
Not working:
-HDR
Working:
-everything else?
Download
Device tree: HERE
Kernel source: HERE
Vendor tree: HERE
XDA:DevDB Information
LineageOS for Vernee Mars, ROM for all devices (see above for details)
Contributors
The Marionette, Alberto96
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2017-05-12
Last Updated 2017-05-12
Changelog:
-12.5.2017.
-initial release
-13.5.2017.
- include Snap Camera(does the work much better)
- make sure the boot animation is smoother(TIP you can simply download the LineageOS boot animation from another source,only the one in the build lags for some reason)
please post the flash procedure
bluetooh not work properly, i cant connect to my parrot
vaorr said:
bluetooh not work properly, i cant connect to my parrot
Click to expand...
Click to collapse
Hmm,that's odd. Bluetooth works fine for me,I successfully connected to another phone and sent files without a single error.
Thanks. This rom is great
hi
device must be unlocked and connect in fastboot mode
just download and extract in drive c
then extract rom in bin folder
c:[\]lenovo_p2a42_Unbrick_g0dsend313[\]bin
then run lenovo p2a42 Unbrick_g0dsend313.exe
select unbrick(option 1)
wait to finish
pass: Ocs
download from download section
dont copy my work to other forum or groups just link this topic
some needed files
twrp
https://mega.nz/#!DB4mCI4B!6qNmiPCa9RYz0O6qyumcKM-DzJip2gGcXOk93oX0IfU
Stock rom (twrp)
https://mega.nz/#!1OAEGARC!IBUGkGAYTuDYS3qiAnVVDfcEh_oDvEB_H6qO9NmT6uY
https://drive.google.com/file/d/1FcXyOpBNGaTEhfgdBp3yS7NE8vz3ZeWz/view
Custom rom
https://shatelland.com/upload/files/125d118f-ebd5-4040-8acb-c7969b0728fc
Stock rom
http://ul.to/0639fijr
XDA:DevDB Information
lenovo p2a42 Unbrick_g0dsend313, Tool/Utility for the Lenovo P2
Contributors
mlm1102003
OCS Team
Version Information
Status: Testing
Created 2018-10-24
Last Updated 2018-10-24
Hope this will help people out there who bricked their phone.....
Or they could just use the Unbrick/Stock FIrmware Flash tool for every problem they have. (FIrmware version S048)
Androidfilehost Link