Related
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.
Thread moved to General.
I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!
successfully done p 6200
Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!
ive also had the same problem duno wut to do anymore
Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck
i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!
CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.
I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
how did you try to enter the recovery mode? what key combination that you press...
Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.
jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.
Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..
Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!
1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....
Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:
I want to reset my tablet due to I'm going to be selling it. I've unrooted it, but SpuerSU is still on the system. I've gone into the backup and reset and selected factory reset and it asks for a PIN number, which I thought I knew, but I guess I don't cause it doesn't like anything I type in.
I have also booted holding power and volume up/right. I get a warning menu about pressing left to flash new rom or right to cancel...
What do I do? I want to reload this to like the day I unboxed it...
Thanks,.
No one has any knowledge of this????
jim2029 said:
I want to reset my tablet due to I'm going to be selling it. I've unrooted it, but SpuerSU is still on the system. I've gone into the backup and reset and selected factory reset and it asks for a PIN number, which I thought I knew, but I guess I don't cause it doesn't like anything I type in.
I have also booted holding power and volume up/right. I get a warning menu about pressing left to flash new rom or right to cancel...
What do I do? I want to reload this to like the day I unboxed it...
Thanks,.
Click to expand...
Click to collapse
Based on it asking for a pin number it sounds like you setup a pin at some point. I run a pin number on my superSU but I'm not sure what happens when you forget the pin number.
I know inside supersu there's an option for full unroot.
Maybe message chainfire the dev of it. I looked at it just now and there's nothing that comes up if you forget the pin number
Sent from my ThunderBolt using xda premium
Running CM10.1 on my GT-P3113
The pin number is for the android factory reset, not for super user app.
jim2029 said:
The pin number is for the android factory reset, not for super user app.
Click to expand...
Click to collapse
You got to do following
1.clear flash counter via triangle awayflash
2.
Flash stock rom for ur region, clear data
OR
Choose clear up/remove superuser in superuser menu....
You're done...enjoy!!!!!!:beer::beer::beer::beer::beer:
Sent from my GT-P3100 using xda app-developers app
Droidlover123 said:
You got to do following
1.clear flash counter via triangle awayflash
2.
Flash stock rom for ur region, clear data
OR
Choose clear up/remove superuser in superuser menu....
You're done...enjoy!!!!!!:beer::beer::beer::beer::beer:
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Quite a good tutorial http://forum.xda-developers.com/showthread.php?t=1856532
Thanks,I did this and now all i have is the tablet rebooting with Mobile Odin flashing saying Done! and then it reboots and does it all over again. Its in a flashing boot loop. I can't even turn the thing off......
????????????????????????????
jim2029 said:
Thanks,I did this and now all i have is the tablet rebooting with Mobile Odin flashing saying Done! and then it reboots and does it all over again. Its in a flashing boot loop. I can't even turn the thing off......
????????????????????????????
Click to expand...
Click to collapse
Bro go for pc odin.
And hold volume down and power you will go to download mode.
Thanks, got it working again.
GT-P5113 factory reset with Odin Multi Downloader 4.43
Is Odin Multidownloader compatible with Galaxy Tab 2 10.1 ??
Ive been trying to reload the stock rom with it from this tutorial but it wont recognize
the device.
http://forum.xda-developers.com/show....php?t=1922505
Ive tried WITH and WITHOUT KIES installed. Have the samsung drivers installed I used to root
but nothing shows up. It shows up with Odin3-v1.85_3 but no matter what I do, on a differnet PC trying
even, the GT-P5113 never shows up in odin 4.43 multidownloader. What is wrong??
Hi there, i'm from indonesia...
Just wondering whats wrong with my step, cause now i got P3100 "stuck on "Samsung Galaxy Tab 2" Screen" until the battery drains out...
First :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "GT-P3100_ClockworkMod-Recovery_6.0.1.0.tar" file on PDA
- START
- Finish (Sucssesful)
- Reboot
- Result "stuck on "Samsung Galaxy Tab 2" Screen"
Note : just try to flash cwm to flash root.zip for P3100
Second :
- Trun off P3100
- put download mode
- connect P3100 to pc
- Click ODIN
- select "P3100XXBLH2_P3100OLBBLH1_P3100XXLH2_HOME.tar.md5" file on PDA (downloaded from Sammobile)
- START
- Finish (Sucssesful)
- Reboot
Note : Try to Restock to stock firmware 4.0.4 & already try with PIT.File selected on ODIN but..
- still "stuck on "Samsung Galaxy Tab 2" Screen"
Anybody can help me with this issue...??
Cheers
Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.
Ok, will try today and report soon...
Cheers
Sent from my Desire HD2 using xda premium
jaydaman said:
Maybe you could try reflashing the stock firmware WITHOUT any PIT file. I only remember needing a PIT file for older devices like the original Galaxy Tab P1000, not for the newer ones like the P3110.
After which, instead of letting it boot normally, try booting into recovery mode, do a factory reset/wipe cache from there then see if all works again.
Btw, one of the more popular rooting methods for P3110 is actually Chainfire AutoRoot, which does not require custom recovery like CWM and only requires you to flash the AutoRoot tar file through ODIN. Very simple & recommended by everyone here.
Click to expand...
Click to collapse
Result still stuck on "Samsung Galaxy Tab 2" screen and now every time i connect my tab to wall charger its only display empty battery with like loading proces but stil no battery icon with green bar & i feel my tab is hot when i plug to wall charger for more than 1 hour...
Conditiom right now :
- doesn't have charging indicator
- still stuck on boot screen
- still can enter download mode
- still cannot eneter stock recovery
- the Battery is feel hot
Anyone can help me out...??
Cheers
Sounds like the bootloader got messed up. That's bad & probably only the service centre can help you now.
No, if you can get it into download mode it's fixable. ODIN recovery again and try to get into recovery.
Posted from my Fascinate using XDA Premium
Probably flashing into stock rom will fixed it, as long as your download mode can be accessing you're gonna be fine :thumbup:
You guys are forgetting the most basic thing to fix the tab. Hold Power+Volume up instead of power+volume down. then using the volume keys highlight wipe data/factory reset and then press power, yes and then once finished reboot the tab.
Facing same problem
Help me
I m facing same problem
How to solve it????
What have you done exactly @saddam6600 ? Please tell each Step!
Have you tryed a factory-reset in Recovery?
I unknowingly got into the same problem..
I managed to get into download mode..
then using adb., I rebooted to recovery..
den I wiped cache, data and system.
den I installed an aosp based rom..
nd den evrythng went fine..
i tried to root it
shivam plzz give me link for that rom
plzz
saddam6600 said:
shivam plzz give me link for that rom
plzz
Click to expand...
Click to collapse
It was cyanogenmod 10.2.
I deleted the rom so can't help you with the link.
Any cyanogenmod rom should work..
try thr latest build..
---> http://forum.xda-developers.com/showpost.php?p=50766295&postcount=1001
Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday
LBGS said:
Hello I have a Samsung Galaxy Tab 2 7.0 It has been experiencing A problem like yours it has been stuck on the "Samsung galaxy tab" screen i read that you should wide all data so i did.. And i read to flash it back to the last rom. i made mine in custa the usb debugging was turned off.om i was trying to put it into stock rom when i encountered the problem. Then when i put it in download mode i was wondering why it can't be detected i realized that because i wiped all data the usb debugging was turned off so. there was no way to flash it back using odin PLEASE help me my tablet version is GT-P3100XXLH2 the fixed one so it has no way to remove the battery the only way was via screws but we don't have the same size PLease healp it's been like this since yesterday
Click to expand...
Click to collapse
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app
can you tell me step by step pls. i'm just a kid btw
dev.kasibhatla said:
Wipe data and install a touchwiz based rom first. I had the same problem and it is a problem of the bootloader.
Then flash twrp using odin.
Once i flashed twrp, all roms work perfect on my tab 2.
Hope that helped.
Sent from my Galaxy S7 edge using XDA-Developers mobile app
Click to expand...
Click to collapse
Tell me step by step pls. i don't know how to do this properly i'm just a kid.
Hey experts so i have the S6 gm-920F i updated OTA and now the phone doesnt recognize the fingerprint and forgot the password so i install TWRP 3 via odin booted the recovery and transferred my data successfully then I made a factory reset to delete the passcode to be able to use the phone after making the reset and pressing reboot system it gets stuck in the recovery the system doesn't reboot so i tried hard rebooting the phone is stuck on black screen that says samsung galaxy s6 and restarts restarts restarts (bootloop) i tried reflash the 6.0.1 bootloader no luck then flash 5.1 bootloader flashed philz recovery then 6.0.1 bootloader still nothing! Did i damage something serious ? does a fresh firmware install through odin bring my phone back to life ? Thanks in advance
Please try a fresh install of Firmware. Install MM bootloader and modem first with TWRP MM compatible recovery and download an extra lite MM rom to see if your phone will come back to life, (using extra lite package is less of a download than a stock 2gb download)
TWRP is what gave me the problem once i enter i can exit from there ! i got the stock firmware tried to flash using odin then get fail! please can you give a noob some simple instructions with links ?
Hi mate, Try flashing through ODIN a TAR image for your phone version. You can find a TAR on a website such as sammobile. Once you have download the tar put your phone into download mode by pressing and holding Volume Down, Home and Power keys at the same time. Start ODIN and connect the phone to your computer, click AP and browse and find the TAR file you downloaded. Then click start and it should flash back stock firmware for your phone.
spkos.kos said:
Hi mate, Try flashing through ODIN a TAR image for your phone version. You can find a TAR on a website such as sammobile. Once you have download the tar put your phone into download mode by pressing and holding Volume Down, Home and Power keys at the same time. Start ODIN and connect the phone to your computer, click AP and browse and find the TAR file you downloaded. Then click start and it should flash back stock firmware for your phone.
Click to expand...
Click to collapse
thats what i did i got failed in the last (hidden.img) problem
elias1995ish said:
thats what i did i got failed in the last (hidden.img) problem
Click to expand...
Click to collapse
Another Solution i have is to try Samsung Smart switch software. That might solve your problem, I have used it before when I was stuck .
spkos.kos said:
Another Solution i have is to try Samsung Smart switch software. That might solve your problem, I have used it before when I was stuck .
Click to expand...
Click to collapse
Yes i'm currently trying smart switch software hopefully it will fix !! there is no way that i have hard bricked my device right?
elias1995ish said:
Yes i'm currently trying smart switch software hopefully it will fix !! there is no way that i have hard bricked my device right?
Click to expand...
Click to collapse
I can't promise that you haven't, however it is extremely hard to hard brick a phone these days. There are many ways to try and restore it to previous condition not all of which I am familiar with, if this doesn't solve your problem keep scouring XDA for an answer, undoutably a more skilled dev will be able to help you
spkos.kos said:
I can't promise that you haven't, however it is extremely hard to hard brick a phone these days. There are many ways to try and restore it to previous condition not all of which I am familiar with, if this doesn't solve your problem keep scouring XDA for an answer, undoutably a more skilled dev will be able to help you
Click to expand...
Click to collapse
THANK GOD!! smart switch fixed the issue for me now boots up fine
elias1995ish said:
THANK GOD!! smart switch fixed the issue for me now boots up fine
Click to expand...
Click to collapse
Good job dude! Hit thanks if that solved it fully for u!