OK, running gnabo V8 on my note 10.1, when the device is powered off and I plug in to charge it the device automatically boots on. Why is this? Can I not charge the device while it is powered off? Any input appreciated. thanks.
I've seen this can be caused by the kernel...
Related
Hi, after flashing this rom yesterday, I plugged my charger overnight while it was docked, I woke up today to find that it completely stopped charging when connected to the wall charger. When I plug it into my computer the computer recognizes it so is this a charger problem ? or something related to the ROM? Is there any fix for this? Thanks.
I actually reinstalled it and it worked fine.. thanks guys lol
Hello all!
I bought the S3 last weekend, 11/4 - flashed AOKP JB Milestone 1 with the kernel that AOKP comes with (Faux, I think?), everything was smooth til today. I had my S3 plugged into my car charger, I was on a call, bluetooth on, etc.. I get out of the car and unplug the phone from its charger and it just shuts off. I'm unable to turn it on, no charging mode, no download mode, no recovery. Absolutely no sign of life. Not sure if this phone is defective or something sporadically happened with the Rom. Any and all advice is appreciated. Thanks!
Also, to update on this. I have a surge protector with usb ports on it. The l.e.d. light on the charger turns on when it is charging any device. However, it does not turn on with the S3, but does turn on with a Droid x2.
Running Cleanrom 5.0 with Imoseyon Kernel. I enabled USB fast charging, at some point I plugged in my external HHD to the phone and guessing that fast charge was still enabled, the phone shut off right when I connected the hard drive. Now it wont boot. Tried different charger, battery and so on. Anyone heard of this happening before? Maybe a fix?
Hey there I need a little help. I recently got a Note 10.1 and I flashed Redemption Rom with CWM. Seemed to work just great until yesterday I noticed that it does not charge when plugged into the wall or a computer. If I plug it into the computer it will recognize it and I can transfer files etc, but it doesn't charge. Also when the charger is plugged in the screen acts funny most things are unresponsive to touch, when the screen is locked and charger plugged in I can't even unlock it. I can poke the screen but not unlock. If I unplug the charger it works just fine.
Has anyone experienced this problem with the GT-N8013 before or have any suggestions? My initial thought was to go back to stock firmware and see what happens, but with only 20% battery power I am scared I may not have enough. Your assistance is greatly appreciated.
Progress....
sullymn said:
Hey there I need a little help. I recently got a Note 10.1 and I flashed Redemption Rom with CWM. Seemed to work just great until yesterday I noticed that it does not charge when plugged into the wall or a computer. If I plug it into the computer it will recognize it and I can transfer files etc, but it doesn't charge. Also when the charger is plugged in the screen acts funny most things are unresponsive to touch, when the screen is locked and charger plugged in I can't even unlock it. I can poke the screen but not unlock. If I unplug the charger it works just fine.
Has anyone experienced this problem with the GT-N8013 before or have any suggestions? My initial thought was to go back to stock firmware and see what happens, but with only 20% battery power I am scared I may not have enough. Your assistance is greatly appreciated.
Click to expand...
Click to collapse
Well I have been messing with it a little while at work here and I think the base of the charger has gone bad. If I use the base from my Samsung phone and plug the USB cord from the 10.1 to that it will acknowledge that I plugged it into the wall but a red X will appear over the battery icon. I powered it down and plugged it in and nothing happened right away, then I just let it sit and now I notice that the battery/charging animation appears and from what I can tell it appears to be charging. I will power it on after a while and see what it says for %.
Figured it out, it was the wall adapter, turns out the outlet I plug it into was faulty and it fried the charger.
Phone: Samsung Galaxy S Blaze 4G SGH-T769 - Rooted running Tweaked 2.1 Android 4.0.4
Tablet: samsung Galaxy Note 10.1 GT-N8013 16Gb - Rooted running Redemption Rom v3.1 Android 4.1.2
sullymn said:
Figured it out, it was the wall adapter, turns out the outlet I plug it into was faulty and it fried the charger.
Phone: Samsung Galaxy S Blaze 4G SGH-T769 - Rooted running Tweaked 2.1 Android 4.0.4
Tablet: samsung Galaxy Note 10.1 GT-N8013 16Gb - Rooted running Redemption Rom v3.1 Android 4.1.2
Click to expand...
Click to collapse
How did you figure out that it was the charger that was bad? I am having the same issue with my note.
Charging issues after OTA 4.1 undate.
grayj16 said:
How did you figure out that it was the charger that was bad? I am having the same issue with my note.
Click to expand...
Click to collapse
I picked mine up on Thursday and charged it to 100% with the supplied charger and cable, installed the 4.1 system update and used it throughout the following day watching video and general playing. I had it plugged in whilst I was using it and noticed it discharging, odd I thought as it should at least have maintained its charge but after my battery level dropped to 19% on that evening I turned it off completely and left it overnight, this morning it had only charged a further 20%. It has to be a firmware issue as its the only thing thats changed since I first charged it fully without any issues (first charge on 4.0 took approx 3 hours from unboxing).
It needs a 5 volt 2.O Amp Charger to charge properly. IF the adaptor that plugs to the wall isn't putting out enough power it won't work properly. Also could be a bad wire.
Phone: Samsung Galaxy S Blaze 4G SGH-T769 - Rooted running Tweaked 2.1 Android 4.0.4
Tablet: samsung Galaxy Note 10.1 GT-N8013 16Gb - Rooted running Redemption Rom v3.1 Android 4.1.2
Hello all,
I just recently replaced my USB charging port on my galaxy nexus. The phone would not charge before the replacement, however, the phone would turn on with a fully charged battery. Now, the phone will charge but, will not turn on. I checked to make sure that all of the ribbon cables are connected. Before the replacement I did not flash anything new to the phone.
I am running AOKP the 6-30 version, also franco kernel (up to date) Im wondering if it is a hardware issue or something else, maybe bricked? I have tried many methods including taking out the battery, plugging in the USB charger, putting battery back in and turning on.
Any help would be appreciated.