Related
Note: a pre-rooted Gingerbreak stock ROM is now available (see signature).
This is a rooted stock ROM, based on HTC 2.10.405.2, or 2.29.405.2/2.29.405.5.
For the basic rooted-only ROMs:
Added root (including busybox)
Superuser App - 2.3.6.1 (ChainsDD)
Boot sound disabled
The idea behind this is that you get a base ROM that is stock with root, and pretty much nothing else, and then get to choose which changes you want from a set of mods I've put together. I haven't tweaked or changed anything in the stock ROM, no apps are removed or updated (see mod below to restore the boot sound). Choose this first ROM if you don't want to change anything at all, and you simply want a rooted stock ROM, or see below for more options.
You should do a full wipe in recovery before installing the ROM. If you are coming from an official (unrooted) stock ROM, this may not be necessary.
Download 2.10.405.2 Stock ROM with Radio (2.0) - updated
Changes: 2.0 - remove bash from base, update to latest Superuser app, fix file permissions to be an exact copy of stock.
2.10.405.2 INIT.D ROM v2.0
This version is mostly identical to the first except it has a minor mod to enable init.d scripts. No scripts are included, so this won't affect anything in itself. However, it gives much greater flexibility for mods, and is required if you want to make some of the changes below. This version of the ROM doesn't include the radio, so you must flash an up to date version yourself if you don't have one already. You do not have to install the first ROM before this. Updates: latest Superuser app and new boot image (closer to stock).
Download ROM with init.d Support (2.0)
Radio 32.44.00.32U_5.09.05.30_2
2.29.405.2/5 INIT.D ROM v3.0 | v3.1
This is the latest HTC unbranded release. The base ROM is as described above, including init.d support, with no other modifications. Choose this if you want to install the latest rooted stock ROM. The mods below are not all compatible with this newer ROM, so it is important to install only those that are marked as compatible. The 2.29.405.5 is a very minor update from 2.29.405.2; you can install this directly, you do not need to install 2.29.405.2 first.
If you are upgrading from an earlier pre-rooted ROM you may be able to do this without wiping your data, though a wipe is recommended as usual if you experience any problems. To upgrade without wiping you must re-install your previous mods immediately following the ROM's installation. For example, if you have updated your system apps, by installing the new ROM these will be replaced with older versions, and so you must first run the update apps mod again before booting the phone. If you do not, you will certainly get problems. However, if you perform a full wipe, you do not need to worry about any of these things.
The radio supplied by HTC with this ROM is 32.49.00.32U_5.11.05.27 and so is the recommended one for you to flash.
Download 2.29.405.2 ROM
Download 2.29.405.5 ROM (the name on the download is mislabelled.)
Download radio
OPTIONS
Below are some mods to this ROM. They are purely optional, and of course take you further away from the stock ROM. Remember that all of these mods are designed to work with this ROM specifically, and not others.
POWERSAVING MODPACK (1.6) - v3 compatible - updated || 18/10
This update works only with the second ROM with init.d. It adds a few things to the ROM:
Perflock disabler - lets your phone consume less power when idle
Ondemand governor - for good power/performance
Undervolt - reduces the overall power your phone uses
Screenstate scaling - scales down CPU usage depending on battery level and screen state
CFQ scheduler - improved general performance
This modpack will improve battery life over stock, and also improve performance a little. 1.4: new CPU scaling. 1.5: size reduced by over 5 times, no functional change. 1.6: switch to ondemand, less performance drop with battery life reduction.
For the v3.0 ROM you must download version 1.6 of the mod from here.
HIGH POWERSAVING MODPACK (1.0)
This works as an alternative to the above powersaving modpack. Flashing this will replace the other and vice versa. This version conserves more power by using the conservative governor (new) instead of the interactive, and cuts the processor maximum speed to 800MHz when the battery reaches 80%. Thus performance will suffer a little (unless you are running while charging), but battery life will be increased. Download here.
FLASH PLUGIN SYSTEM REPLACEMENT (1.7) - v3 compatible - updated || 20/06
This will completely replace the system version of Flash with the current market version (10.2.156.12). It will install both the app and the system plug in, meaning it won't use any space in your available internal storage. If you have installed the market update yourself, the phone will automatically remove it when you next boot. Since this update requires additional system space, it is advisable to install a mod that clears some space (e.g. the tweaks mod) before you apply this. 1.1: Update to new Market version. 1.2: New Market version. 1.3: New Market version (10.1.105.7) 1.4 New Market version (10.1.106.15). 1.5 New Market Version (10.1.106.16). 1.6 New Market Version. 1.7 New Mark Version (10.3.185.24). Note: There may be a problem with this latest update and video, see here to revert the update.
FLASH PLUGIN REMOVE/UPDATE (1.3)
This mod will remove the system installed version of Flash, freeing up some space for other mods. You can then install the updated version from the market (i.e. taking up data storage, not system). If you have an older version of this mod installed, it will restore your system plugin back to stock, and you may need to reinstall Flash from the market afterwards. If you just want to update the system-installed version of Flash (as with the app update mod), you want the previous mod rather than this one.
MINOR TWEAKS (1.2) - v3 compatible
This mod will enable wake on optical joystick press (as well as the power button), and will install the default boot animation to the data area, where you can replace it with a custom one if you want to. It also allows hosts modification (you can use the AdFree Android app - do not use the symlink option in it). You will need to re-apply this mod if you do a full wipe. 1.2: Update bash.
RESTORE BOOTSOUND (1.0) - v3 compatible
You really like that sound? Ok, you can put it back with this mod. This is suitable for both ROMs.
A2SD+ (1.4) - v3 compatible
This requires the second ROM (v2.0) with init.d. Take a nandroid backup before enabling this. Activate the feature by adding an ext2/ext3 partition to your sdcard (ext4 is not currently supported). It must be formatted and ready to use before adding this. If you have apps on an existing partition it may cause problems if you don't perform a full wipe, but a full wipe is very strongly recommended if you want to use this. This version is safe to use with USB disk mode. Please read this post for important information and the download link.
UPDATE APPS (2.3) - v3 compatible - updated || 20/06
This will update your system Google apps to the following versions: GMail 2.3.2, Maps 4.7.0, Google Search 1.1.2. These are unmodified official versions (the same as market updates). They replace the system installed versions. 1.6: Google Maps 4.7.0. 1.7: GMail 2.3.2, Google Voice Search 2.1.0, include YouTube 2.1.6. 1.8: Maps 5.0.0, Voice Search 2.1.1. 1.9: Maps 5.1.0. 2.0: Maps 5.2.0, GMail 2.3.4.1, now removes Teeter from system. 2.1: Maps 5.2.1. 2.2: Maps 5.3.1. 2.3: Maps 5.6.0, remove Voice Search update.
UPDATE MISC APPS (1.6) - v3 compatible - updated || 20/06
Update system apps - Facebook 1.4.1 and YouTube 2.0.26. 1.3: Facebook 1.5.0, YouTube 2.1.6. 1.4: Facebook 1.5.1. 1.5: Facebook 1.5.3. 1.6: Facebook 1.5.4.
SD READAHEAD (1.0) - v3 compatible - new || 13/12
This will increase the readahead value for the sdcard from 4 to 128, which may improve performance. This small patch does not involve installing a new kernel or boot image. See this post for the download.
Deodexed Mod (1.3) - v3.0 available - updated || 18/12
If you don't know what this is, don't install it. This mod will fully deodex the ROM. It's best to apply this immediately after installing the base stock ROM, and it will remove any changes you've made to the system apps. After applying this mod the first boot will take a long time, this is normal. You will also lose a large amount of the phone's internal storage. There is no way to reverse this mod without reinstalling the base stock ROM. Note that framework-res is already deodexed in this ROM. Update 1.1: fix for deleting old files; 1.2: fix for updated Superuser app. 1.3: now available for v3.0 ROM Download here for v2.0 only. Read this post for the v3.0 version. This mod is currently not supported with the 3.1 ROM.
Super Circle Battery Mod (external) - v3 compatible
Download this file and upload it to http://circle.glx.nl/ where you can choose your style and receive a flash file. Note that you do not have to deodex the ROM for this mod. See this thread for more information. Since I am not responsible for this mod, I am unable to help with any problems with it.
Reboot in Power Menu (external)
Deodexed only: Gain the ability to reboot and not just shutdown from the power menu with snq-'s mod. The download package is here and discussed here.
Compressed dalvik-cache (1.0) - v3 compatible
This mod will compress the dalvik-cache, typically saving around 30% of space. This is especially useful for deodexed ROMs. This mod is compatible with the A2SD+ mod, which moves your dalvik-cache to the sdcard. It may also improve performance very slightly. You MUST wipe your dalvik-cache in custom recovery if you install this mod. If your ROM is not deodexed you should apply the Flash or tweak mod to free up some system space before adding this mod due to its size. Install with the fusecompress attachment. Requires init.d support. See here for v3 version.
teppicify (1.1) - v3 compatible
In case you forget you're not running unrooted stock any more? This will alter the information under 'Software information'. This will also prevent you from getting future OTA HTC update notifications, which are very unlikely to work on a custom ROM anyway. See this post for link.
CIFS + OpenVPN modpack (1.1) - v3 compatible
With this you gain CIFS support to connect to Windows/Samba shares transparently, and OpenVPN support. The WiFi module is also updated to prevent very low speeds when the phone is sleeping. Download here or here for the v3.0 link.
Suggested Installations
Totally Stock: base ROM + restore bootsound.
Rooted Powersaving: base ROM with init.d + powersaving modpack.
Rooted and Updated: base ROM with init.d + tweaks + powersaving modpack + system Flash replacement + updated apps.
_____
Apply the updates in custom recovery. You can apply them immediately after installing the ROM, you do not have to reboot each time. Most mods can be applied at any time, and can be applied over the top of earlier versions.
If you have any problems with the ROM and want help, you must say which one you installed, which mods you've installed, and whether you did a full wipe before you installed the ROM.
Credits: dsixda for kitchen, FloHimself, Myshkinbob and iscaela for kernel modules
If you find my development work useful, please consider a small donation.
better to add a2sd+
and peep for twitter is already fixed?
ghmail2 said:
better to add a2sd+
and peep for twitter is already fixed?
Click to expand...
Click to collapse
Start adding things like that and it's no longer stock. I put this together for people who just want stock + rooted.
edit: A2SD+ is now an optional add-on.
teppic74 said:
Start adding things like that and it's no longer stock. I put this together for people who just want stock + rooted.
Click to expand...
Click to collapse
i agree...
love stock rom
exatly how i wanted!
thanks stock roms are the best
once more, thanks for your work
What the difference with the 32.44.00.32U_5.09.05.30_2 posted on the forum ?
Flashed rom, running great so far, thanks for leaving rom as standard as possible.
And peep/twitter is working again i'm happy now.
Dj Sky said:
What the difference with the 32.44.00.32U_5.09.05.30_2 posted on the forum ?
Click to expand...
Click to collapse
That is a radio, this is a Rom including that radio.
Does it have sense?
Sent from my HTC Desire using XDA App
Of course.
i think it uses sense .. how is the bechmark results(quadrant) and battery life?
Sent from my HTC Desire using Tapatalk
Skimi said:
Does it have sense?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes. It's a stock HTC ROM.
Just installed, great stable rom! Thanks!
In fact, it's a HTC official rom with the latest radio ? Is Exactly ?
good work. Thanks
hw to install
hi..i'm using htc desire in malaysia..i juz updated OTA Froyo 2.13.707.1...is there any chance that i can use urs?? and how to install it??i'm new here..plss help..i dont noe hw to root also
rusty27 said:
hi..i'm using htc desire in malaysia..i juz updated OTA Froyo 2.13.707.1...is there any chance that i can use urs?? and how to install it??i'm new here..plss help..i dont noe hw to root also
Click to expand...
Click to collapse
@rusty
Could you please check what kernel and radio are in your ROM? People wrote about it but nobody uploaded a full version so far (it's under Menu / Settings / About / Software). Thanks!
mmaacc said:
@rusty
Could you please check what kernel and radio are in your ROM? People wrote about it but nobody uploaded a full version so far (it's under Menu / Settings / About / Software). Thanks!
Click to expand...
Click to collapse
@mmaacc
kernel version: 2.6.32.15-gd96f2co
radio: 32.44.00.32U
can i use tat rom?? i didn hv goldcard...can i install this new rom simply or wat??
rusty27 said:
@mmaacc
kernel version: 2.6.32.15-gd96f2co
radio: 32.44.00.32U
can i use tat rom?? i didn hv goldcard...can i install this new rom simply or wat??
Click to expand...
Click to collapse
Thanks, so this has the new kernel also.
For you it actually depends what bootloader you have and if you have a SLCD phone. If you updated through OTA I assume you now have something like HBOOT 0.92. That makes it a bit more difficult to root the phone, which you need to do first. Please have a look around here, there are some guides on how to downgrade/root these newer versions. And after this you should be able to flash this ROM; or any other .
Here is a start http://unrevoked.com/
Can you add a version without radio update?
*** Disclaimer
Flashing a ROM is an inherently risky operation. You alone are responsible for any damages, data loss, or dead kittens caused by flashing this ROM. Nexus devices are notoriously hard to brick, but should you do so by either your own error, omission, or a by flaw in this ROM you have been forewarned.
Introduction
Flo++ is an AOSP Kitkat (KOT49H) based ROM with the stock kernel aimed mostly at minimalists that want a clean base installation with basic power user functionality. GAPPS are not installed to allow you to flash flash the GAPPS package of your choice. I recommend going with one of the PA GAPPS packages.
Images
See attachments below
Features
* Busybox compiled into ROM (/system/bin)
* Pre-Rooted
* Supersu 1.94
* QCOMM Dalvik and Bionic optimizations (This ROM is NOT compatible with ART)
* QCOMM Adreno Graphics Usermode driver update (20140331 version) Revert file is available here
* Android Terminal Emulator (as system app)
* Titanium Backup (as user app)
ToDo:
* Add init.d support
* Edit Framework to add advanced power menu options
* Add Developer and Power user appropriate tools
* Add File Manager
* More stuff based on input and testing
* Add option to install CWM (For users without Custom recovery)
Installation instructions
Requirements:
* Nexus 7 (2013) wifi version (aka "Flo") with unlocked bootloader
* Custom recovery (TWRP or CWM recommended, PhilZ Touch highly recommended)
Instructions:
* Perform a nandroid backup and store it on your PC, this is just prudent practice before installing any ROM
* Copy flo++[version].zip to /sdcard/
* Reboot to recovery
* Perform a Factory Reset or if using PhilZ, "Wipe Data/Factory Reset" > "Clean to Install a new ROM"
* Install Flo++
* Install GAPPS package (optional) if desired.
* Reboot and enjoy
Download
Download from AFH:
Flo++0.4.2.zip
MD5: 45026d4fb49d02eaeb88cf2a49cfb3e3
Flo++0.4.1a.zip
MD5: 5f0daca93ae6345917f39c743552c802
Older versions
Flo++0.3.zip
MD5: 3eb4c88a7859c4508934642878a04342
Flo++0.2.8-signed.zip
MD5: 6f13b2f8a5f30cfdd202b154c84135db
Changelog
flo++ changelog
v0.4.2 [21040406]: added updated Qcomm Adreno 320 GPU drivers. Revert file available here
v0.4.1a [20140405]: Recompiled with latest version of busybox and added Android Terminal Emulator, TitaniumBackup 6.1.5.4. Updated Supersu to v1.94 - Temporarily discontinued use of Aroma Installer.
v0.3.0 [21040314]: Added Basic Aroma Installer, Qualcomm Bionic and Dalvik optimizations. This ROM is not compatible with ART
v0.2.8 [20140306]: Stock AOSP Kernel, busybox (compiled into ROM), Rooted- Supersu 1.93,Rom is signed and can be flashed using Stock Recovery IF factory reset has been done
v0.2.1 : 0.2.7[20140302-20140305]: Internal testing not released
v0.1 [20140228]: Clean "mostly stock" AOSP build, userdebug, stock kernel, Korean and japanese input methods removed
FAQ
Q. Can I install this without a custom recovery?
A. In theory, Yes. Just do a factory reset and it *should* work. You do have backups , Right?
As of v0.3 you must use a custom recovery (until I resolve the signing issue using AROMA)
Q. Why doesn't GPS work?
A. Short answer: Actually it does (confirmed with GPS test), you need to install a GPS app or flash GAPPS with Google Maps in order to actually "use" GPS. Longer answer here.
Q. Backup and restore doesn't work. whats wrong?
A. Backup and restore functionality comes with GAPPS or a special transport service written for a storage service. Since I do not intend to host anyone's backups there is a fix posted here. This issue will be fixed before the ROM is released from Beta status (version 1.0).
Thanks To/Credits
Qualcomm Developer Network, for Adreno Drivers - https://developer.qualcomm.com/
Titanium Track, For Titanium Backup - http://www.matrixrewriter.com/android/
Jack Palevich (jackpal) for Android Terminal Emulator - https://github.com/jackpal/Android-Terminal-Emulator
chainfire, for SuperSU - http://download.chainfire.eu/supersu
Gnurou, for busybox - https://github.com/Gnurou/busybox-android
Google, for AOSP source and kernel - https://android.googlesource.com
amarullz, for AROMA Installer - http://forum.xda-developers.com/showthread.php?t=1461712
kszaq and jphilippon - for making the Bionic and Dalvik optimizations readily available on XDA
Code Aurora Forum, for the Bionic optimization patch
Motorolla, Dalvik library was extracted from Moto X 4.4. ROM.
Known Bugs /Issues
[20140408] Backup and reset do not work out of the box. - workaround here . This will be fixed in next release, but you can enable the function by following the directions in the post.
[20140314] Aroma signature breaks ROM signature. Will fix this when I get a chance, but until then use unsigned zip.
[20149316] It has been reported that GPS is not functional on v0.3 will investigate the report and update as soon as possibile
GPS works (confirmed with GPS test) For user functionality install a third party GPS Nav app or flash PA mico modular GAPPS and install GMaps.
reserved
i'll give it a shot!
What toolchain is this built with?
Sent from my Nexus 7 using xda app-developers app
PwnCakes193 said:
What toolchain is this built with?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
edited:
Whoops I misread your question. This is built GNU make 3.81 x86_64-pc-linux-gnu on Debian Jessie/SID using the standard AOSP /prebuilts. I have not decided whether or not to use Linaro.
Right now I'm working on getting the Aroma installer configured. The next version (probably tonight or tomorrow) will include the qc dalvik and bionic optimizations and a couple more tweaks.
flyboy1100 said:
i'll give it a shot!
Click to expand...
Click to collapse
This ROM is still a work in progress but please feel free to let me know if you have any suggestions or see any problems. I'm uploading the next incremental change right now (AROMA Installer and QCOMM optimizations)
[update: Having some issues uploading to AFH at the moment, will post the link once I can verify the md5 is good and the upload isn't corrupted]
oldsoldier2003 said:
This ROM is still a work in progress but please feel free to let me know if you have any suggestions or see any problems. I'm uploading the next incremental change right now (AROMA Installer and QCOMM optimizations)
[update: Having some issues uploading to AFH at the moment, will post the link once I can verify the md5 is good and the upload isn't corrupted]
Click to expand...
Click to collapse
Advanced reboot and immersive mode and I would be set, especially with the QC and bionic stuff.
This is the perfect ROM I think for me to build my car nexus off since I will be running Timur's kernel + services. I want as minimal as possible.
Sent from my Nexus 7 using Tapatalk
You should build with GCC 4.8. Its under Google source And only requires a few chsnges to work.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
flyboy1100 said:
Advanced reboot and immersive mode and I would be set, especially with the QC and bionic stuff.
This is the perfect ROM I think for me to build my car nexus off since I will be running Timur's kernel + services. I want as minimal as possible.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
as promised... tonight was a bad upload night...
Download from AFH:
Flo++0.3.zip
MD5: 3eb4c88a7859c4508934642878a04342
you might consider installing Xposed and gravitybox(KK) this would neatly solve the power menu and immersive mode. I run both on my non dev rom with no stability issues whatsoever (I don't run any other Xposed modules on that ROM)
oldsoldier2003 said:
as promised... tonight was a bad upload night...
Download from AFH:
Flo++0.3.zip
MD5: 3eb4c88a7859c4508934642878a04342
you might consider installing Xposed and gravitybox(KK) this would neatly solve the power menu and immersive mode. I run both on my non dev rom with no stability issues whatsoever (I don't run any other Xposed modules on that ROM)
Click to expand...
Click to collapse
I will probably look into that, Just wanted a good base to work off w/o tons of extra fluff I won't use. Downloading the newest now
Sent from my SCH-I605 using Tapatalk
I couldn't get gps to work at all on this rom, did you perhaps trim a little too much?
Btw, how did you build this? I returned my flo today since Verizon has the deb/lte for 49.99 this weekend! There is nothing Like this over there and would really like something similar, even if I have to build it myself but I am clueless on how
Sent from my SCH-I605 using Tapatalk
flyboy1100 said:
I couldn't get gps to work at all on this rom, did you perhaps trim a little too much?
Btw, how did you build this? I returned my flo today since Verizon has the deb/lte for 49.99 this weekend! There is nothing Like this over there and would really like something similar, even if I have to build it myself but I am clueless on how
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I'll have a look at this and recheck the proprietary blobs to make sure they are current.
If you want to give building a ROM for deb a go just start here:
http://source.android.com/source/index.html
To compile it you'll need to have a working 64 bit Linux installation, it seems most of the folks here are using Ubuntu. There are tons of tutorials and if you get stuck shoot me a PM and I'll help if I can.
flyboy1100 said:
I couldn't get gps to work at all on this rom, did you perhaps trim a little too much?
Click to expand...
Click to collapse
Apparently this is a semi "known" issue with AOSP stock builds. It has been reported in the past that GPS won't work without GMaps. I flashed PA mico modular GAPPS (it doesn't have Gmaps) and installed GPS test and it reported that the GPS is indeed working.
For a car installation this would work well if you have a third party Navigation app you prefer over GMaps.
I then installed GMaps which further confirmed GPS is working. I've come to the conclusion that this is not "broken" , but is a feature that is not supported "out of the box" by the AOSP build. Makes sense to me since supporting the hardware is OS responsibility, where utilizing the data is application level responsibility.
Any updates ?
Mind if I try to port this to deb?
Sent from my Nexus 7 using Tapatalk
flyboy1100 said:
Any updates ?
Mind if I try to port this to deb?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I took a short (enforced) break due to internet issues last week. Right now I'm in the process of recompiling the ROM and cleaning up the installer so It will be a couple days before I upload a new version.
Have at it I don't have a deb device to test with, but if you have any problems I can try to help you through it in PM.
Work issues have slowed down my progress (double shifts and no days off... ) The next update will include freshly compiled Android Terminal and the latest update of SuperSu.
This project is not abandoned - just slowed down for a bit
Status update:
v0.4.0 [20140405]: Recompiled with latest version of busybox and added Android Terminal Emulator, TitaniumBackup 6.1.5.4. Updated Supersu to v1.94 - Temporarily discontinued use of Aroma Installer
Click to expand...
Click to collapse
It's late here I'll update and upload tomorrow after testing.
uploaded to AFH
http://www.androidfilehost.com/?fid=23329332407584361
MD5 : 5f0daca93ae6345917f39c743552c802
TESTING!!
Computerfreek274_Unlocked_1.3.7 Based from Stock 5.1 .49
Disclaimer: Please Read if this ROM or any software kills your phone in any way. I am no way to be held responsible. Please read I Also will not be responsible for any data loss. Backup you data we have twrp now.
All ROM's,Audio Mods, Pon-3, Kernels, ect Downloads can all be found under Download here below.Download Here
Please Read! The Whole OP and how to install.
Start Here for Update 1.3.7 6/5/2016 .49 based Please READ
Computerfreek274_Unlocked.49_1.3.7 Update
Based from .49 OTA update 5/15/2016
Change Log
.49 OTA Update
06/05/2016 Cleaned up some more verizon junk.
Bloat Free
Hotspot Tether
Audio tweaks and Vol Steps *You can still download from my OP the tweaks or V4A for better sound.
Root
Busybox
xposed ready just download and flash after you setup the ROM.
Pon-3 and other audio mods flash after your 1st setup.
New Radios
Small Tweaks
HOW TO INSTALL ! 1.3.7 Updated 6/05/2016
1. Download firstEncounter's .49 Bootloader/Radio Pack from here. Big Thanks to firstEncounter for his great work and great img packs.
2 Download Computerfreek274_Unlocked.49_1.3.7.zip
3. Flash firstEncounter's .49 Bootloader/Radio Pack.
4. Flash Computerfreek274_unlocked.49_1.3.7 Verizon or non Verizon build.
3. Wipe Cache and reboot and enjoy.
* if you have already updated your radios and bootloader to .49 then you can just flash 1.3.7 or newer.
If you are doing a full wipe! Wipe data and cache all at the same time. then do steps 1 and 2
Flash radios pack 1st then flash ROM. NOTE: Flashing my IMG pack will upgrade your bootloader so never re-lock your bootloader thinking you can just sunshine YOU CAN'T after you upgrade. Yes you can still re-lock if you need to return the phone
Any Bugs in 1.3.7 ?
No not that I have seen
Slow 1st boot if your upgrading and not doing a full wipe.
1.3.5+ END HERE PLEASE READ ABOVE
Outdated Info and Chang logs.
Bugs.
With Verizon messenger Plus app if you use back camera with flash phone will crash. This is only in the verizon msg app.
work around is to take pic with camera then attache the photo and send.
Change-log Updated 04/04/2016
04/04/2016
Verizon Build There is 2 versions your Standard build and battery save. Battery save only for Verizon users this helps with battery drain you get with Verizon network over LTE.
Performance tuning is turned on on the battery save mode. So the phone needs time to settle in a bit before it feels 100% in my testing it looks to save around 5% or more over standard build " I am loving the battery save build myself. remember this is based on what I have running results will vary per user"
Fixed battery faster battery drain from 1.29 in standard build and batter save.
Removed .mp4 demo video to save space.
Removed and updated moto camera to the last build. This gives users an option to uninstall update if they like same with my Verizon and some other apps.
Fixed emoji's and updated to newest android from MM.
Non-Verizon fixed APN settings so it will pick up your APN from your sim / network.
Non-Verizon build Faster 3g 2x data. " Remember it can only go as fast as your network gives you" But I did tweak it a bit.
Non-Verizon Build Removed My Verizon and other Verizon apps that got in from 1.2.9.
Non-Verizon users You will not be getting an battery save build. This is due to GSM networks. Plus way to hard for me to test if it will save battery. I do believe the non-Verizon build is already much better on battery on Verizon build. This is due to that you have non of the Verizon apps running.
This change log maybe missing a few things I have done a lot and tested a lot over the past few weeks to get this ver just right.
3/2/2016
1.2.8 Verizon Build Updated to address a few Bugs that have been found in verizon build only.
Fixed xposed bug.
Fixed Reboots with xposed.
Fixed audio mods.
02/06/2016
Removed HP Print and Google Print *Download from play Store if you need it. Fixed where when I removed it in the past it did not work from play store HP system drivers are still installed.
Removed Moto care plus one other moto app.
Updated network settings Faster Verizon lte speeds mostly upload.
Faster Switching from 3g to LTE.
Made changes to make Xposed v80 more compatible.
Made Changes for new ver of Viper4Audio audio mod to work with droid turbo if you install it. Pon-3/v4a will also still work.
Few other bug fixes.
Better power saving 1/11/2016.
Put Stock Command center back in. 1/11/2016
Removed Turbo 2 command center download and flash from here 1/11/2016.
Updated My Verizon app to newest apk. 1/11/2016
Added Turbo 2 wallpapers. 1/11/2016
Removed some old moto files that where not needed. 1/11/2016
Audio boosted on app apps and in-call and all codecs. 1/11/2016
Updated Init.d support in kernel 1/11/2016 Please search for init.d tweaks in google for lollipop.
Misc Small fixes and tweaks 1/11/2016
Fixed memory removed lag. 1/11/2016
Fixed up Audio mixed boosted audio mid-range pre-installed 1/11/2016
Fixed My Verizon SSO login 1/11/2016
Removed apps and files.
Amazon apps
Slacker radio
Bug2GoStub
GooglePinyinIME
Translate
BodyGuardApp
fswriter
install-recovery.cfg
recovery-resource.dat
recovery-from-boot.p
Tweaks updated and fixes
Heap size now 72 was 32.
GPU speed tweaks fixed from 1.2.2.
Updated Wireless tweaks.
More free ram for apps. "Tweak"
Faster app loading "tweak"
zip aligned.
4g LTE Speed and locking/Switching.
Fixed Audio buffers in 1.2.4
Battery save stuff. "Tweak's"
I also cleaned up some other stuff. and more fixes. Smaller download size.
Installing Update
Flash Right over any of my ROMs or Mofo Img's using TWRP.
After flashing rom you can Flash Xposed if you use it V79 Download here.
After install Please wipe cache and reboot. If you did not do a clean full wipe then. Please let the phone settle in a bit. So it can update a bit around 1/2 hours after some updates for it to settle in nice for it to show it's tweaks.
Enjoy!
Also Get your updated Xposed here v80
Benchmark Screen shot here with lots of my apps installed.
Download 1.2.3a ROM HERE DeOdexed Non-Verzion users Download 1.2.3a then read Post #2 for adding better support for global services.
You can always find more help and support on my website computerfreek.com
Old Change Logs see above
ChangeLog
Computerfreek274_Unlocked_Deodexed_1.2.3a 12/09/2015
Removed Verizon protect
Removed Office
Most Verizon apps other than Hotspot and My verizon can be uninstalled. If you see them in your apps you can now uninstall all but them two.
Boosted media buffers.
GPU speed and ram tweak.
lower background apps running at one time by 5.
Updated apps
Google play
Google play services
Moto camera.
Moto gallery
Gmail
Chrome updated and put back in.
Translator
And a few others I can not remember.
Build tweaks I think this will help with play service crash. I have not got any so far. Only time will tell.
1.2 - 1.2.2
Faster 1st boot.
Optional Global Ver for none Verizon users. Find it under downloads.
Audio Boost v2 The best In call Audio on the droid turbo. (New)
Deodexed build. There is also your standard odex build. (New)
Native Tether/Hotspot tested and working 100%
Removed more Verizon apps. This is the last of the Verizon apps i can remove that are needed for the system. Please remember if you remove or freeze My Verizon app it will disable your advanced calling.
Verizon Messenger has been removed. This can be re-downloaded from google play
Fixed Build.prop removed old PON-3/V4A Settings.
Fixed host file put it back on the system as we don't need it in data anymore.
Xposed and pon-3 Is optional add on I did this in case you where going to use other audio mods or none at all. This opens up better support for users of my Rom some users do not like pon-3. Just You can download all needed files with the download.
Cleaned up amazon junk in /ect
Much faster over all bit more ram and cache speeds better R/W speeds.
Faster 3g and wifi.
Removed Boot animation. (Replace with your own if you like.)
Features:
Audio Boost v2 The best In call Audio on the droid turbo. (New)
Deodexed build. There is also your standard odex build. (New)
All the best tweaks and audio mods from my 1.6 images.
Full root with unlocked bootloader via Sunshine.
Stable! - I don't publish images without exhaustively testing them. If you have any issues to report, reply to this post and either myself or the community will rally to help fix the issue.
Much better battery life! - This image focuses on battery savings without compromising performance. Your phone will last much longer while running this system image.
Multiple versions - From Stock to Global.
Fast! - This image is lean, fast, and enhanced for performance.
No bloat! - All bloat that is available on the Play Store has been removed. Extra files (like help videos and help audio files) have also been removed.
Optional AdAway.
Now with Pon-3 Audio/ V4A - Increase the volume and the quality of audio output from the Droid Turbo by enabling VIPER4Android I optimized the system for any audio mode you use. You can flash PON-3 from my downloads.
Enabled for XPOSED Updated to newest ver. Optional download flash via twrp and install APK. i put the needed ver and files in downloads. Xposed needs to be flashed.
Audio Boost Mods
Download Here
1st one Stock No Audio Boost (Stock)
2nd Mid Range Audio Boost ( Mid Range no gain boost Stock Max Audio 84% Mid range Max 90%)
3rd High_Gain v2 ( Boosted Gain and Max volume At 94%)
How to Install
How to install
Backup Your Stuff!!! Photos and more !!! Use Twrp to do a full system backup!!! And then Copy it to your PC save it forever!
If you already have done step 1 and 2 go to step 3.
Step 1 Phone bootloader must be unlocked via sunshine root. I will no longer help users unlock please see sunshine If you need an none xposed ver use @firstEncounter v3 listed here. I blocked my no xposed img from downloads. I know it worked for most users but there was a few it did not and hung up on sunshine server blocking there IP. @jcase recommend you use @firstEncounter v3 or update to stock .44 then unlock with sunshine.
Step 2 Install Twrp Recovery Get it here.
Step 3 Enter recovery Copy my rom/zip to your phones storage device.
And any other options your download from here xposed and PON-3 put all zip's on phone storage. And flash/install in recovery computerfreek_Unlocked_1.X 1st then install/flash xposed,Pon-3 zip's
Step 4 In recovery click install select my rom .zip and slide to install
Step 5 Hit home and go to wipe for best results slide bar to do factory reset.
Step 6 Reboot system
Step 7 Your done setup your phone xposed and pon-3 audio if you install it.
Step 8 If you flashed xposed you need to install the APK now.
Please remember this is a hobby for me and my son who is 13 years old. Any donations we get are used for web and file hosting also to help with the cost of the internet. We try and do are best to give you support. We work very hard keeping everything up to date. We do not make money off this we do this to help other like us. Remember if you like to help to keep this going you can send donations to google wallet to [email protected] or paypal [email protected]. Thank you So much for supporting this hobby.
Credits go to.
@jcase For his great work and the rest of the team. Not just for the great unlocked bootloader, But for everything he has done. Thank you.
Thank You Theroot.ninja for the Sunshine See there website here.[/CENTER]
@cbalt Has made this very global friendly flashable zip for my ROMS This will give you better support for GSM in the USA and overseas. It will also remove all the Verizon junk for you as you do not need it if your not on Verizon. . @computerfreek274 and @cbalt will offer support for this the best we can. It is hard to give full support if we have no way to test the service provider you have. For best support have your APN's for your service and check that they are in your phone already. Please read below for more info and setup. As always backup your data. And remember we are not responsible for any data loss or if this software somehow kills your phone.
THIS IS NOT FOR VERIZON USERS. This has been tested on 1.2.3a
This is an update to my Removal Script. A few things have changed. First off since this is only for Global users to begin with, I have updated it to also update your Build.Prop, gps.conf, and apns-conf.xml. There are also 4 Different Versions now.
REBOOT AND FLASH AFTER GOING THROUGH THE SETUP WIZARD.
The files without Verizon in their name remove, Notice TTS aka Text To Speech and Velvet in there which is the Google APP aka Google Now. It removes everything I personally do not use. The files with Verizon in their name will be better suited for you if you don't want it slimmed down. In the next day or three I will create the .zips required to reinstall all the stuff removed in both along with a file to only update Build.Prop, gps.conf, and apns-conf.xml.
BasicDreams
CloudPrint
com.customermobile.preload.vzw
com.motorola.android.nativedropboxagent
com.verizon.ims.jar
com.verizon.ims.xml)
com.verizon.os.jar
com.verizon.os.xml
com.verizon.phone.jar
com.verizon.phone.xml
com.verizon.settings.jar
com.verizon.settings.xml
com.vzw.android.smart.jar
com.vzw.android.smart.xml
ECID_VZW_Quark
FaceLock
GoogleFeedback
GoogleTTS
HPLegacyPlugin
HoloSpiralWallpaper
HotspotLauncher
KnowYourDevice
LiveWallpapers
MotoDemo
MotoFolio
Motorola_MyVerizonMobile.mp4
Motorola_VerizonMessages_HowTo.mp4
MyVerizon
NoiseField
PhaseBeam
Quickoffice
VMobileSecurity
VVM3
Velvet
VerizonSSOEngine
VerizonWireless.wav
VisualizationWallpapers
VzwAVS
VzwCbsLoader
VzwController
VzwDeviceSetup
VzwFamilyBaseCompanion
VzwLocationAgent
VzwPhoneService
VzwSecureSettings
VzwSettingsExt
vzwPhoneExt
The Files With Verizon in their name remove
com.customermobile.preload.vzw
com.verizon.ims.jar
com.verizon.ims.xml)
com.verizon.os.jar
com.verizon.os.xml
com.verizon.phone.jar
com.verizon.phone.xml
com.verizon.settings.jar
com.verizon.settings.xml
com.vzw.android.smart.jar
com.vzw.android.smart.xml
ECID_VZW_Quark
HotspotLauncher
Motorola_MyVerizonMobile.mp4
Motorola_VerizonMessages_HowTo.mp4
MyVerizon
VMobileSecurity
VVM3
VerizonSSOEngine
VerizonWireless.wav
VzwAVS
VzwCbsLoader
VzwController
VzwDeviceSetup
VzwFamilyBaseCompanion
VzwLocationAgent
VzwPhoneService
VzwSecureSettings
VzwSettingsExt
vzwPhoneExt
Global GSM IS for full GSM MODE.
Global is NOT for full GSM Mode.
Download : https://androidfilehost.com/?w=files&flid=45270
DO NOT ASK FOR ETAS, It will only make me work slower.
how to
What does the BL unlock let us do that MOFO hasnt?
Michaelmansour1997 said:
What does the BL unlock let us do that MOFO hasnt?
Click to expand...
Click to collapse
Full root! Full read write, access to kernel, android pay may work. As an user you will have full root so you can change your own fonts, host, emojis and so much more. Plus this is going to also let users that where stuck on stock 5.1 high and dry unlock and have root also. Think about this if you need to replace your phone it is shipped with 5.1 now this will allow you to unlock it and get back to root.
computerfreek274 said:
Full root! Full read write, access to kernel, android pay may work. As an user you will have full root so you can change your own fonts, host, emojis and so much more. Plus this is going to also let users that where stuck on stock 5.1 high and dry unlock and have root also. Think about this if you need to replace your phone it is shipped with 5.1 now this will allow you to unlock it and get back to root.
Click to expand...
Click to collapse
Sweet, will we be able to get CM13 on it?
Michaelmansour1997 said:
Sweet, will we be able to get CM13 on it?
Click to expand...
Click to collapse
Yeah working builds now. So when we get an unlock I will just need to test.
computerfreek274 said:
Yeah working builds now. So when we get an unlock I will just need to test.
Click to expand...
Click to collapse
niceeeeeeeeee
will it work on turbo 2 ?
mike_augie said:
will it work on turbo 2 ?
Click to expand...
Click to collapse
the BL unlock - nopes
I was getting my phone ready for the Sunshine release and downloaded it onto my phone. I'm currently running 1.6b pon with xposed baked into the system. When I tried Sunshine it said I must uninstall xposed. Is there a way to do that without wiping data and flashing an older system?
djbling said:
I was GE ting my phone ready for the Sunshine release and downloaded it onto my phone. I'm currently running 1.6b pon with xposed baked into the system. When I tried Sunshine it said I must uninstall xposed. Is there a way to do that without wiping data and flashing an older system?
Click to expand...
Click to collapse
Yes go to my site computerfreek.com and download the none xposed img I made for this.
Or direct link here to download
@djbling I updated OP and my website for more info. When sunshine is released for are phones we will have more info. We may have to flash are bootloader via flashboot when the time comes I will update the OP.
Thanks! Computerfreak. Glad to see your on top of it! That was a real fast reply!
djbling said:
Thanks! Computerfreak. Glad to see your on top of it! That was a real fast reply!
Click to expand...
Click to collapse
Yeah and the good news is most users are on the .44 kernel so all you have to do is flash the no xposed ver of my img via mofo. Then unlocked via sunshine. Reboot and now you will have full rw root and still be on my img. Re-install xposed framework and your done.
You can then install twrp and do a full system backup via twrp recovery and save a copy of it on your PC too. Then sometime after that I will have all kinds of flashable roms from stock to cm and aosp.
Cm and aosp and nexus will need testing so I can get voice mail working and advanced calling on nexus and aosp roms. As for cm it may need a bit more time and testing.
Sunshine 3.2 beta for droid turbo is out!
---------- Post added at 04:51 AM ---------- Previous post was at 04:49 AM ----------
http://forum.xda-developers.com/showpost.php?p=64027688&postcount=4064
Now that those of us that were stuck on locked 5.1 have unlocked bootloaders, how do we acquire permanent root? I'm new to the while unlocked bootloader thing.
Sent from my XT1254 using Tapatalk
Once your bootloader is unlocked, flash the twrp recovery and a rooted image. See the OP
This is exciting stuff! Thanks so much to CF for this thread. I was scrolling through 44 pages of the bootloader unlock thread looking for specifics, but as per usual CF has laid it all out for us here in an efficient and easy to understand post. We are lucky to have him in this community.
Sent from my XT1254 using Tapatalk
The "Download Computerfreek274_Unlocked_1.0" link doesn't work - getting not allowed/access denied
mad3963 said:
Now that those of us that were stuck on locked 5.1 have unlocked bootloaders, how do we acquire permanent root? I'm new to the while unlocked bootloader thing.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
For now you can go and download any one of my 1..6 img under downloads at computrrfreek.com unzip enter fastboot mode and fastboot flash system imgnamehere.img let it go when done enter recovery wipe cache and data. Reboot and not you have all the perks of my img and full root.
I am working on flashable img's. but I am going to have to call it for tonight 1:30 am here. I will test more when I get up.
What does this do?
This flashable ZIP file attempts to speed up Android OS by implementing tweaks and removing programs that the average Android user may not utilize. It also adds build.prop tweaks, init.d tweaks and a hosts file all aimed at one goal, to reach Android's maximum performance.
Before doing anything, be sure to backup with recovery since things might go wrong.
How to install/update:
First things first, YOU HAVE TO DOWNLOAD A 3RD PARTY LAUNCHER AS THIS MOD REMOVES THE DEFAULT LAUNCHER. I recommend Nova Launcher
1. Download ZIP and transfer it onto your phone's downloads folder (much easier if you download it through phone)
2. Boot into recovery mode and make a BACKUP first before flashing!
3. Flash the downloaded ZIP file.
4. After the process, wipe dalvik-cache and cache partitions (you do not need to format data)
5. Done! Now boot into the system and wait for the boot process to take you to lock screen (should take longer than usual, maybe about 1-10min. Don't be scared if your phone is taking longer than usual)
6. Open Settings > Apps > ::: (3 dots on the top right corner) > Reset app preferences (If you do not have this step, you can skip)
7. Done! After flashing, I recommend calibrating battery (you do not need to do this every update!)
NOTE: For a while, it may seem that Android's performance is worse and the battery is slower. Give it some time to adapt to the new changes
For updates, just download the updated ZIP and follow the installation steps again! Easy peasy.
Common Issues:
Boot Loops
Black Screen on Startup
Phone won't boot
Settings do not respond when opened
Certain apps lost functionality
Spam messages saying: "Unfortunately android.app has stopped working"
Notifications not working
Any issue that comes up, restore it from backup. Usually, uninstalled system apps are what cause these issues. To prevent them, you will need to remove some lines in the updater-script in my ZIP and reflash it. Be sure to report any bugs you find so they can be fixed right away!
Compatibility:
This ZIP file should be compatible with all ROMs (stock-based, AOSP-based and even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge (G935W8) running stock-based ROM (Superman ROM v3.0.1).
Tested on:
- LineageOS 16.0 ROM Android P
- Superman ROM v3.0.1
- The Galaxy Project
Changelog:
1.5.2
- Added more programs to debloat list
- More ads blocked in the hosts file
- Added more build.prop tweaks
1.5.1
- Tested and working
- Programs in updater-script are now sorted in alphabetical order for easier finding
1.5beta3 *UNTESTED*
- Added a LOT more BuildProp tweaks (115+ lines!)
- Added mxt224_ts_input.idc (makes touch screen better and responsive)
- System apps are now included in Doze
- Added sysctl.conf (extra protection)
- Added a LOT more init.d tweaks
- Added local.prop (values for performance)
- For older versions, visit - https://forum.xda-developers.com/s7-edge/themes/roms-android-acceleration-strip-t3841643
1.5beta2 *UNTESTED*
- Fixed the HOSTS file
. - Remove invalid rows
. - Added 13,000 new lines (now containing over 61,000 lines!)
. - Removed useless lines
. - Sorted alphabetically
. - Removed empty lines
1.5beta *UNTESTED*
- Added a LOT more Init.d tweaks (increases performance by managing cpu and ram better and many more)
- Added a LOT more BuildProp tweaks (increase performance)
- Added a hosts file (contains over 48,000 lines!) that blocks malware and ads, thus increasing speed
1.4.1
- Tested and fixed some issues. Includes all changes below.
- Ignore the error, "failed to mount /cache". It will function regardless
1.4beta3 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Included v1.3.3 changes
1.4beta2 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added buildprop tweaks
- Does not include v1.3.3 changes
1.4beta *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added init.d tweaks
- Does not include v1.3.3 changes
1.3.3
- Added ADAPT SOUND and PRINTERS to debloat list
1.3.2
- Added a build prop tweak to utilize hyperthreading
1.3.1
- Added more apps to debloat list. Expect more apps to be added in the future
1.3
- Added more to debloat list
- Added buildprop tweaks
- This should fix error 7 in TWRP
- COMING SOON: Init.d tweaks
1.2.1
- I'll add build.prop and init.d tweaks when I can
- More apps to added to debloat. BACKUP
- After flashing be sure to wipe cache and dalvik
1.2 - DO NOT DOWNLOAD. ERROR IN UPDATER-SCRIPT. FIXING IN v1.3
- Added init.d tweaks
- Added BuildProp tweaks
- Added more to debloat list
1.1
-Added more to debloat list, be sure to backup just in case anything goes wrong!
1.0
- Init
Permissions:
- Feel free to take anything from the zip file, however, you must credit me as creator.
- If you are reuploading this on another website, add a link to this xda thread.
123keelos said:
1. Download ZIP (much easier if you download it through phone)
Click to expand...
Click to collapse
It is better if a mirror link also available...
Thanks
HemanthJabalpuri said:
It is better if a mirror link also available...
Thanks
Click to expand...
Click to collapse
I'll try to get a mirror up. Also, how does a mirror link being available make it better?
123keelos said:
I'll try to get a mirror up. Also, how does a mirror link being available make it better?
Click to expand...
Click to collapse
Since I cant able to download the attachment.. it shows error..
Thanks
HemanthJabalpuri said:
Since I cant able to download the attachment.. it shows error..
Thanks
Click to expand...
Click to collapse
I see. Check the description, I uploaded a mirror link
Hi it's really efficient for battery and performance or not? I've a custom kernel and custom stock rom. I use ex Kernel manager for tweaking my kernel with naptime and servicely too, thx in advance. In deepsleep my phone loose only 4% in 8 hours.
narco14 said:
Hi it's really efficient for battery and performance or not? I've a custom kernel and custom stock rom. I use ex Kernel manager for tweaking my kernel with naptime and servicely too, thx in advance. In deepsleep my phone loose only 4% in 8 hours.
Click to expand...
Click to collapse
- Battery Life: Will be a bit better since it removes aps that would run in the background. It also adds performance settings that would drain the battery a little bit, but overall, it would be better
- Performance: It will improve since not as many apps are running in the background as opposed to stock
I, too, use a custom ROM and kernel.
Can I flash by Magisk Manager? or TWRP only?
My device arch is x86. can I use?
Hi! I have a problem, I can't access system or any data from TWRP, so I can't flash your zip even through sideload.
Can you make a Magisk version? It would be great!
dhampire said:
Can I flash by Magisk Manager? or TWRP only?
My device arch is x86. can I use?
Click to expand...
Click to collapse
I dont know about flashing with Magisk so I think it's best that TWRP is used.
No devices (are known) are incompatible with this zip file so you can flash it on any Android
evilarthas said:
Hi! I have a problem, I can't access system or any data from TWRP, so I can't flash your zip even through sideload.
Can you make a Magisk version? It would be great!
Click to expand...
Click to collapse
I dont have any experience with making a Magisk version.
Go to TWRP, click on Mount and check System then press BACK (dont click mount system). This probably would fix your issue.
Hi, first of all thank you for your effort.
I can't get your mod working on my phone. I removed some essential lines from update script, then I even formatted data in order to have access to my system and data and then flashed. It says that it can't get access to /cache. However, as I can observe, the patch is applied. I boot up my phone and have another welcome application, I proceed and then it is stuck on "Android is starting". Very disappointed, wanted this mod to work and to get the bloat out of my phone.
My phone is sm-935s. TWRP is installed, as well as Magisk.
Stock oreo 8.0.0
evilarthas said:
Hi, first of all thank you for your effort.
I can't get your mod working on my phone. I removed some essential lines from update script, then I even formatted data in order to have access to my system and data and then flashed. It says that it can't get access to /cache. However, as I can observe, the patch is applied. I boot up my phone and have another welcome application, I proceed and then it is stuck on "Android is starting". Very disappointed, wanted this mod to work and to get the bloat out of my phone.
My phone is sm-935s. TWRP is installed, as well as Magisk.
Stock oreo 8.0.0
Click to expand...
Click to collapse
For me, it says that cache cant be accessed after I flash it. It still works for me even though. This error can be ignored
As for the Android starting stuck, it means that the updater-script is removing some applications that are necessary for a functioning phone. You will have to do some experimenting and remove lines until you find the issue.
Hi, 1.5.1 working without issues and without deleted some lines in updater script ?
It works on S7 Edge ?
dawidk750i said:
It works on S7 Edge ?
Click to expand...
Click to collapse
man, did you read OP???
Compatibility:
This ZIP file should be compatible with all ROMs (even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge running stock-based ROM (Superman ROM v3.0.1).
Click to expand...
Click to collapse
I tried v1.5.1 on my Moto X4 (Android 9) and have error 7 in TWRP..
My phone just become worse
In the first message, there are so many errors written that unfortunately the human is hesitant to install.
For this reason, many people may think again when they want to install it.
Error in flashing on GT-N7000
Failed to mount '/cache (No such file or directory)'
Clean OS by Ayan
This rom is based on stock OneUI for Galaxy S20 FE. It is based on November patch but I assuring monthly updates whenever next month's security patch is released.
Visually its no different from the stock rom as I have not changed any thing drastic to maintain stability. Purpose for building this is that it is TWRP Flashable and it can be used to flash stock rom over a GSI without needing to flash everything from ODIN.
Please Note
* INSTALL THIS ONLY IF YOU HAVE ONEUI4 INSTALLED ALREADY OTHERWISE IT WONT BOOT ON ONEII3 FIRMWARE
* Your warranty is now void ( anyway it got void when you unlocked your bootloader )
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* Some Bugs might happen because of stock firmware so don't blame me for them. Report them to me I will see if it is possible to fix them from my side
* you point the finger at me for messing up your device, I will laugh at you. Do it at your own Risk
Requirements
Unlocked Bootloader
Custom Recovery
Stock Firmware
Features
DEBLOATED around 70-80 apps making system lighter
Build Prop Tweaks
Call End Delay Fixed
No Performance Drop in Battery Saver ( 60 hz display though)
FPS Cap Remover ( MIn 60 fps and Max 120 fps set)
Faster Booting Enabled
Vulkan Enabled
RIL wakelock optimization
Audio Improvements
Improve Ram Management
Improve Audio and Video
Faster Streaming Videos
Disables Built In Error Reporting
Boot & Shutdown Animation FPS Boost
Better Signal
Better Call Voice Quality
Disables Error Checking
Increase jpg quality to 100%
Camera Tweaks Supports Google Camera (Not sure if it works for everyone)(But gcam opens up with less lag)
Dalvik Virtual Machine Tweaks
FPS Stabilizer
Better Internet Speed
Auto DImming Fix
LiquidSmoothUI
Better scrolling
Multi User Added
Removed Boot Warning ( ONLY FOR EXYNOS)
*CSC Features Added
Volte, Screenshot and many icons in Quick Settings
Mobile Data Toggle in Power Off Menu
Voice Recording Activated ( It doesnt work in Wifi Calls and that is set by Samsung)
4g icon in status bar replaced with LTE
Knox gaurd disabled
Real Time Network speed in status bar
Camera Shutter Sound Button
LTE only network mode
WIFI calling active
Many more csc features
Google Photos Mod( Works Maybe)
v1.2
*Google Feed Intregration
*Super Fast Charging Toggle Added
*Samsung Marketing Disabled
V1.3
*Gaming optimization
*Prime Kernel Included(Only Exynos right now)
*Magisk Pre installed
*MODS By LUCA
1. Enable screen shot on secure app
2.Enable quick reply on secure lockscreen
3.Adaptive brightness boost
4.Official Status in Settings
5.Patch Secure folder Knox
Jan Update V1.4
(PLEASE PLEASE update the oneui base first to Jan)(Dirty updating might work for you but dont ask me questions if your patch is still December)
1.Based on Jan Firmware for respective devices(Full Update only avaliable)
2.Magisk V24 install automatically
3.Prime Kernel for all devices
4.Removed Software Updates section
5.Some under the hood optimizarions
Feb Update !! V1.5( Snap Devices) V1.5.5( Exynos)
1. Synced with latest Feb firmware for the respective devices
2. Some build tweaks
3. Vendor Tweaks
1.restore the standard implied limit of usual RAM consumption
2.AOSP standard value (just better for multitasking)
3.prevent instant "close all apps" mechanism every time the camera app opens
(these tweaks are personally tested by me for a long time and they dont hinder any performance and experience)
4.Magisk updated to v24.1
5.MODS BY @vladwin
1. Dual Recording added in camera
2. Option for Autofocus Tracking in 1080p 60 fps video
3.Legacy Fonts fix
March Update !! V2(Snap Devices) V1.75(Exynos)
1. Snapdragon Users both 4g and 5g builds are based on latest oneui4.1 firmware
2. Removed Prime Kernel have been restored as per user's choice
Have provided with stock boot img in the folder but please remember to patch them with magisk first
3.In sync with Feb update
4. Exynos builds are based DVC2( March Patch) Oneui4. Thanks to Samsung!!
5. Fixed Camera Issues in Exynos
small update !!
Exynos V2 based on oneui4.1 is also avaliable but oneui update is required for it to be installed
CleanOS4.1 V2.1 update
1. Based On March Update oneui4.1
2. In sync with V2
3.Updated Magisk to V24.3
4. System Debloated even more by removing unnecessary 25 apps more
5. Some new System Build prop tweaks
6. Added Clean Build ID in about phone section
7. Removed Factory Reset Protection
8. Increased Frame Buffer Rate(Exy Only)
9.Fixed GameHome labs not showing
10. Disabled liboemcrypto-so to allow DRM-protected content to play (e.g. Netflix, My5, etc.). ( still hd wont work)
11. Some Vendor tweaks
12.Updated Multidisabler to a12 one
13. SHealth Fix
14. Updated Restore apps with latest one in installer
15.Removed Boot.img as it was causing bootloop for many people
EXYNOS PEOPLE PLEASE UPDATE TO ONEUI4.1 to use V2 and above
Clean OS4.1 V2.5 Update Final
1. April Patch
2. In sync with V2.1
3.Bluetooth Fix (galaxy watch pairing issue)
4.Restored Stock kernel which is patched but still unrooted
5.Removed Encryption from the system
Patch fstab in partition,ramdisk,delete stock recovery restore, removed know kernel protection etc
6. APP LOCK FIXED IN EXY
will get fixed in snap device in their next builds
Bugs
You tell me
Whatever oneui4 has it will have that
Might Bootloop please either use either the latest prime kernel builds or the respective stock unpatched img(might have to patch it in magisk to retain root) in gdrive
Clean OS Debloater
Its not just a debloater but it does two more things. You can make your animations smoother as well as try out hidden screen mode through it (just follow the instructions carefully.
Clean OS debloater
Instruction to Flash
1. Format Data is a must for best performance
2. Flashing it over clean install is advised though not recommended
3.Install Zip through custom recovery like twrp
4. Flash Magisk
Download
Both incremental and Full update zips avaliable)
People already using CleanOS 4 can you use incremental zip to update
( G-drive Links) ( For versions 1.5 and above)
Exynos ( G780F)
Snap 4G ( G780G)
Snap 5G (G781B)
(ANDROID FILE HOST LINKS) ( For versions 1.5 below)
Exynos
Snap 5G
Snap 4G
Credits
@ricci206 (He is the MVP here providing me his mods)
@Rick_BR ( Method to remove bootloader warning)
@el0xren ( guides to have various features)
@ Testers in Telegram group
@BlassGO (Very Nice and helpful guy with great knowledge, literally guided me to build)
Various xda thread of S20 and S20 FE for debloating guides
@3mel
(For his help in various things and being very active here in thread helping others out)
Contact
Donate
Thanks!
Is this ROM (Snap 5G) based on G781BXXU4DUL9?
Not completely Russian is in the settings, although I was fine in Malaysian
Don't boot for me S20 Fe exynos https://samfrew.com/es/model/SM-G780F/region/UYO/
rost-doc said:
Not completely Russian is in the settings, although I was fine in Malaysian
Click to expand...
Click to collapse
Fixed by reinstalling the firmware
thechester said:
Don't boot for me S20 Fe exynos https://samfrew.com/es/model/SM-G780F/region/UYO/
Click to expand...
Click to collapse
Should have installed oneui4 first then only it can boot
New Update
v1.2
Google Feed Added
Super fast charging toggle
Samsung Marketing Disabled
Incremental Zip there in the link wont need to download full rom zip if you are in clean os 4 already
Mobile banking apps are working?
I'm currently on v2.5.5 with my Snap 5G.
I don't wanna lose any data or format data when I upgrade to CleanOS 4.
In Odin, do I have to flash BL, AP, CP and CSC?
If I flash all this, do I lose TWRP?
I guess I also have to flahs HOME_CSC instead of CSC?
In Odin, do I have to put something in USERDATA?
ibizje said:
Mobile banking apps are working?
Click to expand...
Click to collapse
Yeah, they work with Magisk Canary+Zygisk
Ubimo said:
I'm currently on v2.5.5 with my Snap 5G.
I don't wanna lose any data or format data when I upgrade to CleanOS 4.
In Odin, do I have to flash BL, AP, CP and CSC?
If I flash all this, do I lose TWRP?
I guess I also have to flahs HOME_CSC instead of CSC?
In Odin, do I have to put something in USERDATA?
Click to expand...
Click to collapse
To install CleanOS 4, you need to be in Stock Android 12. Maybe tou can try to flash stock OneUi 4 with home_csc directly from CleanOS 2.5.5 and then install TWRP again and install CleanOS 4. I don't recommend, probably bugs will appear or even don't boot.
Rick_BR said:
To install CleanOS 4, you need to be in Stock Android 12. Maybe tou can try to flash stock OneUi 4 with home_csc directly from CleanOS 2.5.5 and then install TWRP again and install CleanOS 4. I don't recommend, probably bugs will appear or even don't boot.
Click to expand...
Click to collapse
TWRP would be replaced and encryption would come back. flashing TWRP and vbmeta would mean a wipe and flashing multidisabler would mean a format.
3mel said:
TWRP would be replaced and encryption would come back. flashing TWRP and vbmeta would mean a wipe and flashing multidisabler would mean a format.
Click to expand...
Click to collapse
In Android 11 I managed to do this steps and not format data, but as I said, a fresh instalation is preferred
camera app got an improvement? for example: telephoto in pro mode, the ability to switch cameras in fhd60fps (telephoto can record video in fhd60fps). Will there be eSIM support. Also, I personally wanted to have the ath11k driver in the kernel instead of qcacld-3.0, but ath11k needs a 5.10 kernel, can you think of something? I will be very grateful if at least one feature is added
Savox326 said:
camera app got an improvement? for example: telephoto in pro mode, the ability to switch cameras in fhd60fps (telephoto can record video in fhd60fps). Will there be eSIM support. Also, I personally wanted to have the ath11k driver in the kernel instead of qcacld-3.0, but ath11k needs a 5.10 kernel, can you think of something? I will be very grateful if at least one feature is added
Click to expand...
Click to collapse
the guy who builds kernels for the FE said there's no chance of getting that new of a kernel as it's way too much work to port it over.
no idea on the rest of your list.
3mel said:
the guy who builds kernels for the FE said there's no chance of getting that new of a kernel as it's way too much work to port it over.
no idea on the rest of your list.
Click to expand...
Click to collapse
Hm, Have S20 FE hardware esim support? In S20 models esim works on SN110 SoC
Savox326 said:
Hm, Have S20 FE hardware esim support? In S20 models esim works on SN110 SoC
Click to expand...
Click to collapse
as far as I know Samsung never said it was coming to the FE
Hi, thanks for the ROM, I still dislike oneui to my very core, but, it feels a lot better now
Rick_BR said:
Yeah, they work with Magisk Canary+Zygisk
Click to expand...
Click to collapse
Could you elaborate? Maybe a link to zygisk or forum thread about this, cause all the tutorials I found by googling seem suspicious at best
Also, there was recently a law passed in Russia that forced manufacturers to install a bunch of useless Russian apps (and a few useful ones). I was able to simply uninstall them in cleanos4 (which I could not do in stock, since they kept getting reinstalled). But maybe there is way to bypass this entirely?
ramilmsh said:
Hi, thanks for the ROM, I still dislike oneui to my very core, but, it feels a lot better now
Could you elaborate? Maybe a link to zygisk or forum thread about this, cause all the tutorials I found by googling seem suspicious at best
Also, there was recently a law passed in Russia that forced manufacturers to install a bunch of useless Russian apps (and a few useful ones). I was able to simply uninstall them in cleanos4 (which I could not do in stock, since they kept getting reinstalled). But maybe there is way to bypass this entirely?
Click to expand...
Click to collapse
Zygisk is a function present in Magisk Canary, it's like the "new" Magisk hide. As you install Magisk Canary, go to settings and enable it, simple and straightfoward. I recommend you install the Universal Safetynet fix module too, the latest version is compatible with Zygisk.
What is the apps? The Yandex ones? I've deleted all of them directly from the folders in system. They never come back.
Rick_BR said:
Zygisk is a function present in Magisk Canary, it's like the "new" Magisk hide. As you install Magisk Canary, go to settings and enable it, simple and straightfoward. I recommend you install the Universal Safetynet fix module too, the latest version is compatible with Zygisk.
What is the apps? The Yandex ones? I've deleted all of them directly from the folders in system. They never come back.
Click to expand...
Click to collapse
The Yandex apps stayed for sure (they are installed with Andoid setup). But also (from memory, there are 17 in total):
- Marusya - Mail.ru (voice assistant)
- ICQ new - Mail.ru (text chat)
- Mail.ru -Mail.ru (mail client)
- Gosuslugi
- Apps (app recommendations for more russian bloatware)
- Kaspersky internet security and VPN
- some others, i forget