{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xposed Module x86
I want to start this post off with a couple of very clear points:
@rovo89 is the creator of the Xposed framework
Thanks to @shakalaca for his hardwork in porting Xposed to our x86 Lollipop Device
Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this project
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Before you download
Donate to @rovo89
Show your thanks to @shakalaca and donate him as well.
Without these people, this would not have been possible at all.
Download
Attached zip file below in this thread.
How to install?
1. No matter what you do, back-up first.
2.Download and extract the file provided.
3. From extracted folder run InstallXposedInstaller.bat (Make sure you are rooted and you have enabled USB Debugging Mode if you have doubts kindly ask me in this thread). Once this is finished proceed to next step.
4.Now run InstallXposedFramework.bat file. Your phone will now reboot.
5. It will take a little longer to boot up but don't worry (only 5 mins at most if screen stuck at loading for more than 10 mins you are probably bricked).
6. Your phone now has Xposed. :highfive:
Extra Links:
How to root lollipop rom?
This can easily be done by using following tutorial. Use T2 option it works like a charm.
How to enable USB Debugging?
Settings>About>Software information touch "Build Number" 7x
Now go to Setting>Developer Options>Enable USB Debugging Mode (easy wasn't it?).
Kindly press Thanks button next to you if you found this thread useful.
Regards
arun483
List of Working Modules On Asus Zenfone 4 A400CG Lollipop Build : Here (Prevent yourself from bootloops by reading this list once)
Thanks to @Pawneshwer for making a list.
Will it work for Zenfone 5 (lollipop) ....??
reference(shakalace post) : http://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=83639
translate it via google translator.
thanks
rishav754 said:
Will it work for Zenfone 5 (lollipop) ....??
reference(shakalace post) : http://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=83639
translate it via google translator.
thanks
Click to expand...
Click to collapse
Yep it will work on all Intel x86 devices running Lollipop
arun483 said:
Xposed Module x86
I want to start this post off with a couple of very clear points:
@rovo89 is the creator of the Xposed framework
Thanks to @shakalaca for his hardwork in porting Xposed to our x86 Lollipop Device
Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this project
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Before you download
Donate to @rovo89
Show your thanks to @shakalaca and donate him as well.
Without these people, this would not have been possible at all.
Download
Attached zip file below in this thread.
How to install?
1. No matter what you do, back-up first.
2.Download and extract the file provided.
3. From extracted folder run InstallXposedInstaller.bat (Make sure you are rooted and you have enabled USB Debugging Mode if you have doubts kindly ask me in this thread). Once this is finished proceed to next step.
4.Now run InstallXposedFramework.bat file. Your phone will now reboot.
5. It will take a little longer to boot up but don't worry (only 5 mins at most if screen stuck at loading for more than 10 mins you are probably bricked).
6. Your phone now has Xposed. :highfive:
Extra Links:
How to root lollipop rom?
This can easily be done by using following tutorial. Use T2 option it works like a charm.
How to enable USB Debugging?
Settings>About>Software information touch "Build Number" 7x
Now go to Setting>Developer Options>Enable USB Debugging Mode (easy wasn't it?).
Kindly press Thanks button next to you if you found this thread useful.
Regards
arun483
Click to expand...
Click to collapse
Why does windows have two install batch files while Mac has one? I use Linux so trying to understand why the difference.
Windows first script installs apk yet Mac script never installs it, is this just an incomplete Mac script?
Sent from my BLU STUDIO 5.0 C using Tapatalk
Ok installed via Linux using windows method, Mac method is incomplete.
Sent from my BLU STUDIO 5.0 C using Tapatalk
vampirefo said:
Ok installed via Linux using windows method, Mac method is incomplete.
Sent from my BLU STUDIO 5.0 C using Tapatalk
Click to expand...
Click to collapse
Yep mac method is incomplete, first batch file installs Android application and the other installs Xposed Module through adb shell.
Here is List of working xposed modules for zenfone lollipop
arun483 said:
Click to expand...
Click to collapse
here i have found some modules which are working on zenfone mobiles with lollipop, and also some modules which causes bootloop.
so take a look first before using any modules. otherwise you will get into bootloop.
i waste my 2 hours in bootloop ..
http://www.xdablogs.com/2015/06/list-of-working-xposed-modules-for-asus-zenfone-lollipop.html
Pawneshwer said:
here i have found some modules which are working on zenfone mobiles with lollipop, and also some modules which causes bootloop.
so take a look first before using any modules. otherwise you will get into bootloop.
i waste my 2 hours in bootloop ..
http://www.xdablogs.com/2015/06/list-of-working-xposed-modules-for-asus-zenfone-lollipop.html
Click to expand...
Click to collapse
Thanks for reporting this here I will include your link in my post so that users can be safe from bootloops :highfive: :good:
arun483 said:
Thanks for reporting this here I will include your link in my post so that users can be safe from bootloops :highfive: :good:
Click to expand...
Click to collapse
yes sure bro.. I m testing more modules and will update list too..
and thank u..
Will tis work on Asus Memopad with Intel and LP?
And gravitybox is working?
EDIT: Working on Asus ME176CX like a charm.
I use the memory patch and it seems to work well, as well as greenify, any other suggestions?
Sent from my NXA8QC116 using Tapatalk
vampirefo said:
I use the memory patch and it seems to work well, as well as greenify, any other suggestions?
Sent from my NXA8QC116 using Tapatalk
Click to expand...
Click to collapse
My suggestions -
- APM+
- AppOpsXposed
- USSD Blocker (if you're using prepaid in India and don't like the constant pop-ups; must be turned off and on after every reboot)
- XBridge
- XPrivacy
zatycz said:
Will tis work on Asus Memopad with Intel and LP?
And gravitybox is working?
EDIT: Working on Asus ME176CX like a charm.
Click to expand...
Click to collapse
Yes as I told in the main thread it will work on all devices running lollipop and Intel chipset
Would anyone be willing to test if NotifyClean is safe for a Zenfone Xposed?
Got this on my Asus Zenfone 2 ZE551ML 64GB US/WW model - works great! so far stable as a rock
is it working on latest firmware 3.24.40.70?
---------- Post added at 12:34 PM ---------- Previous post was at 12:33 PM ----------
arun483 said:
List of Working Modules On Asus Zenfone 4 A400CG Lollipop Build : Here (Prevent yourself from bootloops by reading this list once)
Thanks to @Pawneshwer for making a list.
Click to expand...
Click to collapse
is it working on latest firmware 3.24.40.70?
zatycz said:
Will tis work on Asus Memopad with Intel and LP?
And gravitybox is working?
EDIT: Working on Asus ME176CX like a charm.
Click to expand...
Click to collapse
Have you tried gravitybox yet? I'd like to install it too
arun483 said:
Xposed Module x86
I want to start this post off with a couple of very clear points:
@rovo89 is the creator of the Xposed framework
Thanks to @shakalaca for his hardwork in porting Xposed to our x86 Lollipop Device
Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this project
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Before you download
Donate to @rovo89
Show your thanks to @shakalaca and donate him as well.
Without these people, this would not have been possible at all.
Download
Attached zip file below in this thread.
How to install?
1. No matter what you do, back-up first.
2.Download and extract the file provided.
3. From extracted folder run InstallXposedInstaller.bat (Make sure you are rooted and you have enabled USB Debugging Mode if you have doubts kindly ask me in this thread). Once this is finished proceed to next step.
4.Now run InstallXposedFramework.bat file. Your phone will now reboot.
5. It will take a little longer to boot up but don't worry (only 5 mins at most if screen stuck at loading for more than 10 mins you are probably bricked).
6. Your phone now has Xposed. :highfive:
Extra Links:
How to root lollipop rom?
This can easily be done by using following tutorial. Use T2 option it works like a charm.
How to enable USB Debugging?
Settings>About>Software information touch "Build Number" 7x
Now go to Setting>Developer Options>Enable USB Debugging Mode (easy wasn't it?).
Kindly press Thanks button next to you if you found this thread useful.
Regards
arun483
Click to expand...
Click to collapse
Will it work on ASUS Fonepad 7 FE170CG running Lollipop 5.0(Stock ROM)??
Intel Atom Z2520 present!
Thanks in advance!
can you please tell me some manual methods to remove xposed from fastboot?
Related
RETIRED: Since I no longer own this device I am unable to update/maintain this any further! Furthermore it was only designed to support certain models that are no longer sold so to answer all questions NO it won't work on the new ones. As of Dec 20th, 2014 all downloads have been removed (Sorry for the inconvenience)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Rooted and Google Apps fully enabled with offical first run wizard Android 4.0 rom for late generation Nextbook Premium 7 tablets.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lockscreen
Homescreen
Notifications
Notification Toggles
App Switcher
App Drawer
App Drawer Widgets
About/Settings
Google Play Store
Google Play Store App View
Supported
Any Nextbook Premium 7 in the YF1011XXXXX serial number Series (May work on newer models)
Unsupported Hardware Revisions
YF1212XXXXX - WiFi Reported to not work
Download
Discontinued (Sorry for the inconvenience)
Extra Apps
None currenty
Features
Rooted (su,Superuser,Busybox), Full google apps suite, debloated, OI File Manager, Titanium Backup, ADB over wifi (don't work over usb).
Install/Upgrade
Download and extract the folder from Kustom-Kream_n7p-v1.zip to any folder of your choice
Reboot device using paper clip then quickly press and hold reset until you get black screen with usb plugged in
When windows wants driver give it the respective folder for your os (32bit or 64bit) from Drivers folder
Run RK29update.exe if status bar on bottom reads Found RKAndroid rock usb you are good but if it shows
No Found RKAndroid rock usb repeat steps 2-3
Leave the default selected items if you are doing fresh install or just select System if it is upgrade
If this is your first time installing you are required to tick the Loader option otherwise ignore this step if you are upgrading
If you are doing fresh install click EraseIDB after it finishes then click Run otherwise JUST do Run
if you are upgrading
If all went well your Next7P will reboot into custom rom
WARNING: Installing this will remove all your data & apps if you select more than System!!!
Factory Restore
Download and extract the folder from n7p_rescue_kit.zip
Reboot device using paper clip then quickly press and hold reset until you get black screen with usb plugged in
When windows wants driver give it the respective folder for your os (32bit or 64bit) from Drivers folder
Run RKBatchTool.exe if square number 1 is green on bottom you are good but if it shows as grey repeat steps 2-3
Click Restore
WARNING: Restoring factory default will remove all your data & apps!!!
Version History
v1 ~ Initial release
Credit
Google: For their work on Android and the related apps
ChainsDD: Superuser/SU
CyanogenMod: disclaimer
Titanium Track: Titanium Backup
Joshendy/Finless: Next7P1N rom dump
Openintents : OI File manager
Notes
ADB don't work over usb due to some odd USB host mode support built into the stock rom it is based on.
Key
* ~ Latest as of the time of post
! ~ Removed due to future of flash for android (and rom version was majorly out of date)
Hi mate,
Amazing work...!!! I found it yesterday and I'll be testing this weekend...!!!
Just in case... I downloaded "n7p_rescue_kit.zip", but "RKBatchTool.exe" is not there... I got it from other post but let me know how to use it with the files in the rescue kit... ;-)
Thanks again for this jewel !
Javier.
JHAres said:
Hi mate,
Amazing work...!!! I found it yesterday and I'll be testing this weekend...!!!
Just in case... I downloaded "n7p_rescue_kit.zip", but "RKBatchTool.exe" is not there... I got it from other post but let me know how to use it with the files in the rescue kit... ;-)
Thanks again for this jewel !
Javier.
Click to expand...
Click to collapse
The file is in my local copy of the zip.. checking out the one on server and if it's found to be incomplete ill re upload.
ps. this rom is fully dogfooded on my own next7p
Edit: the file is fine what program are you extracting it with?
Wifi not enabling
After flashing tablet from a clean install several times WIFI fails to enable. everything else seems good so far....
johnny14794 said:
After flashing tablet from a clean install several times WIFI fails to enable. everything else seems good so far....
Click to expand...
Click to collapse
What is your serial number series? I've only tested it on the yf1011 series and many say the 1011 roms work on 1211.
kibmcz said:
The file is in my local copy of the zip.. checking out the one on server and if it's found to be incomplete ill re upload.
ps. this rom is fully dogfooded on my own next7p
Edit: the file is fine what program are you extracting it with?
Click to expand...
Click to collapse
Hi.... just using plain Winrar... nothing special.... weird.... going to download again....
Besides.... I found my NP7 is serial YF08.... geezzz.... I dunno if try or not... I dont know the diferences with YF10.... What do you think ? Too risky to try ?
Regards !
---------- Post added at 12:49 AM ---------- Previous post was at 12:43 AM ----------
kibmcz said:
The file is in my local copy of the zip.. checking out the one on server and if it's found to be incomplete ill re upload.
ps. this rom is fully dogfooded on my own next7p
Edit: the file is fine what program are you extracting it with?
Click to expand...
Click to collapse
Well downloaded "n7p_rescue_kit.zip" again.... not ""RKBatchTool.exe"" in the file... opens fine, no CRC errors... Wich folder contains that file ? Maybe I overlooked...
JHAres said:
Hi.... just using plain Winrar... nothing special.... weird.... going to download again....
Besides.... I found my NP7 is serial YF08.... geezzz.... I dunno if try or not... I dont know the diferences with YF10.... What do you think ? Too risky to try ?
Regards !
Click to expand...
Click to collapse
1011 and on got different wifi/touch key hardware it seems.
You can get a rooted rom for your model here http://www.freaktab.com/showthread....m-ROM-with-Market3-4-4-By-Finless-Version-1-4
Also it has a stock rom linked if you want to go pure stock.
kibmcz said:
What is your serial number series? I've only tested it on the yf1011 series and many say the 1011 roms work on 1211.
Click to expand...
Click to collapse
Hmm no serial # found any where. Bought this tablet at a pawnshop yesterday.
All works fine except wifi. Am sure it's the rom. Went back to factory firmware and it worked fine again...
Looking at manufacturers site serial # should have been on the back bottom, some sort of green small sticker, but it is missing. Any way to find out? I don't have box either...
running great on 1011 model.
the non deodexed rom bob made based on the ram dump was full of
lags and glitches.
this is terrific,all systems go-wifi,etc....
thank you.
Thanks for the info..
wilson pickett said:
running great on 1011 model.
the non deodexed rom bob made based on the ram dump was full of
lags and glitches.
this is terrific,all systems go-wifi,etc....
thank you.
Click to expand...
Click to collapse
Great i strive to bring the pure google experience to these budget tablets.
ps. if you want the rockchips video player ill be attaching it to the main post.
johnny14794 said:
Hmm no serial # found any where. Bought this tablet at a pawnshop yesterday.
All works fine except wifi. Am sure it's the rom. Went back to factory firmware and it worked fine again...
Looking at manufacturers site serial # should have been on the back bottom, some sort of green small sticker, but it is missing. Any way to find out? I don't have box either...
Click to expand...
Click to collapse
Since wifi don't work id say it's at least a 0911 model since the 1011 and up did change wifi. The serial number is based on manufacturing date (eg my 1011 is from october 2011) and in theroy can be fuond from the build number line on stock. What does the "Build Number" line in devices about screen show for yours?
Hi Kib,
Is is possible to get a ICS version for YF08 ???
Say yes, please.... hehehe...
Kind regards !
JHAres said:
Hi Kib,
Is is possible to get a ICS version for YF08 ???
Say yes, please.... hehehe...
Kind regards !
Click to expand...
Click to collapse
Well Wifi could probably be fixed it was able to figure out what the wifi module is but the driver arch between gb and ics MAY be diff so that would be major obstacle and beyond me but perhaps someone could port it.
kibmcz said:
Well Wifi could probably be fixed it was able to figure out what the wifi module is but the driver arch between gb and ics MAY be diff so that would be major obstacle and beyond me but perhaps someone could port it.
Click to expand...
Click to collapse
Hi again !
Well I did a Faith Jump and installed.... the ICS is working AMAZING but WiFi doesn't work... snif... snif...
Kind regards...!!!
JHAres said:
Hi again !
Well I did a Faith Jump and installed.... the ICS is working AMAZING but WiFi doesn't work... snif... snif...
Kind regards...!!!
Click to expand...
Click to collapse
Thanks for trying.... I'll update post to make sure others don't try. Btw you can use this excellent rooted rom on yours... http://www.freaktab.com/showthread....m-ROM-with-Market3-4-4-By-Finless-Version-1-4.
Wow I just got to say wow man am finally enjoying my tablet thanks dude awaiting the next update.
catr8 said:
Wow I just got to say wow man am finally enjoying my tablet thanks dude awaiting the next update.
Click to expand...
Click to collapse
Glad i could help you get past the hell of GB... once you go ICS you don't go back. It may not be the most perfect ics implementation but at least it works.
ps. What did you think of the official Google first run wizard bonus?
kibmcz said:
Glad i could help you get past the hell of GB... once you go ICS you don't go back. It may not be the most perfect ics implementation but at least it works.
ps. What did you think of the official Google first run wizard bonus?
Click to expand...
Click to collapse
All I can say is wow wow wow awesome dude love the bonus, one question though the Google Play wont let me install
fb
Click to expand...
Click to collapse
it says not compatible but this ics man what gives?, anywho thanks for this my unit booths up & runs extremely fast.
catr8 said:
All I can say is wow wow wow awesome dude love the bonus, one question though the Google Play wont let me install it says not compatible but this ics man what gives?, anywho thanks for this my unit booths up & runs extremely fast.
Click to expand...
Click to collapse
Yep a qwerk of the ics stock rom it is based on sadly... some apps that should work wont install. I just install on phone then backup using ES File Explorer then install via file manager.
I was looking at faking nexus s to bypass the issue tho.
Edit: Tried messing with build.prop and all i got was changed ui when i faked acer a100 no app support differences.
Hi KIB,
My Nextbook Premium 7 YF101135982 is doing good on ICS, soft key working good,sound too. however i'm unable to turn on wifi, when i try to turn on it will off back. any idea ?
Code:
*
* Your warranty is now void -------------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms ------------- STOP HERE!!
* The roms comes as it is----no workarounds----no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. No bloatware
2. Rooted
3. Tweaked
1. Decrease boot time
2. Power saving
3. Telephony/ring Tweaks
4. Proximity (Disable blackscreen issue after call)
5. Audio & video recording
6. Faster streaming videos
7. Net speeds
8. Better signal (wifi, 2g, 3g)
9. Better call voice quality
10. Benchmark tweaks
4. Battery Optimised
5. Blackhawk's NEXT kernel 2.4
6. S5 Look like (UI, Sounds, Wallpaper and Launcher)
7. Ideal for Gaming
1. Enable power saving
2. Decrease brightness
3. Turn off the Wifi, Bluetooth, GPS, etc when you don't need that.
4. Remove unwanted apps
5. Use only 2G Network
6. Set your screen timeout to the shortest length possible
7. Don't use auto brightness
http://postimg.org/gallery/29aw20e4e/
1.Copy the ZIP File to the internal card
2.Wipe Data&Cache&System
3.Install the Zip
4.Install the blackhawk-next-kernel-2.4-t311.zip and mali-400-r3p2-01rel3-api29-t31x.zip from here http://forum.xda-developers.com/devdb/project/?id=5210#downloads
5.Finally REBOOT
Don't forget to flash the latest edition of the Philz Recovery!!!! : https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt013g/philz_touch_6.19.3-lt013g.tar.md5/
https://drive.google.com/file/d/0BwWGbBx-jMwvVDdNVVltRkFDY2s/view?usp=sharing
Guide. How to restore warranty: http://forum.xda-developers.com/galaxy-tab-3/general/guide-restore-warranty-galaxy-tab-3-3g-t2869141
XDA:DevDB Information
Galaxy S5 UI for our Galaxy Tab 3, ROM for the Samsung Galaxy Tab 3
Contributors
t-shock
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Custom Recovery Installed & Brain!
Based On: Stock 4.4
Version Information
Status: Stable
Current Stable Version: V5
Stable Release Date: 2014-11-10
Created 2014-08-26
Last Updated 2015-01-04
Changelog
V1:
Intial release
V1.1:
Minor bugs fixed
Installation bug fixed
V2:
Added Tweaks (a ton!)
V2.1:
Minor bugs fixed
Also more apps removed
V3:
4.4!!!
V3.1:
Minor bugs fixed
V4:
S5 Launcher, Icons, UI, sounds
More battery friendly
Lighter
Ideal for gaming
Smallest zip file, because I removed MORE APPS!!!!
Reserved
Any chance for the sm-t315 (LTE)? ?
gx3k said:
Any chance for the sm-t315 (LTE)? ��
Click to expand...
Click to collapse
Sorry man
Can't do that
t-shock said:
Hello to T311 users
I have just made a touchwiz rom, but this time I removed all bloatware (see attachment)
Sorry about WIND bootanimation, I will try to remove it in the next release
Click to expand...
Click to collapse
Hello! Does this work with blackhawk dual boot kernel by ketut? I tried replacing my sammy which was my primary ROM but does not seem to get installed! Please clarify!
gkvidhu1979 said:
Hello! Does this work with blackhawk dual boot kernel by ketut? I tried replacing my sammy which was my primary ROM but does not seem to get installed! Please clarify!
Click to expand...
Click to collapse
I tried to install too and I had the same problem. Please wait to upload a restore version of this rom
Link is up!!
Replaced my stock with this tweaked ROM. Great and fast ROM. Thanks a lot for your efforts. Using this with CM 4.4.4 by Ketut. Thanks again for this ROM.
Edit: Disable MD5 checksum in philz recovery!
Sent from my SM-T311 using XDA Free mobile app
V2 damaged? I open on windows..
it says ;
The archive is either in unknown format or damaged
Im very interested in this rom, but as a newbie i dont know how to install. can you pls show me step by step?
also, the two files i downloaded appear to be corrupt.. where can i re-download them?
tks a lot for your help..!
subharkah said:
V2 damaged? I open on windows..
it says ;
The archive is either in unknown format or damaged
Click to expand...
Click to collapse
cuonguq said:
Im very interested in this rom, but as a newbie i dont know how to install. can you pls show me step by step?
also, the two files i downloaded appear to be corrupt.. where can i re-download them?
tks a lot for your help..!
Click to expand...
Click to collapse
I am on holiday until 4th August so wait to re-uploaded at 5 August
New release!!!!
new release!!!!! V2.1
Very interested in this but have a question. Can anyone confirm if this works on T310?
TardyKilla said:
Very interested in this but have a question. Can anyone confirm if this works on T310?
Click to expand...
Click to collapse
It might work!
Please tell me the problems that you faced so I can make a patch for t310
Im gonna dl it now and try it on my t310. Ill let ya know.
Sent from my SM-T310 using xda premium
roninep said:
Im gonna dl it now and try it on my t310. Ill let ya know.
Sent from my SM-T310 using xda premium
Click to expand...
Click to collapse
TardyKilla said:
Very interested in this but have a question. Can anyone confirm if this works on T310?
Click to expand...
Click to collapse
Please let me know if
WIFI
Bluetooth
Microphone
Speakers
Camera (front & back)
Soft & Hard Keys
worked
If you faced any type of problem ( error while installing or fc) please let me know
Anwser on PM
Im backing up now, and will let you know within the hour.
Looking forward to it.
EDIT:
V2.2 is working on the T310.
I used Philz recovery (6.48 I think - the latest)
Wifi does not connect
Bluetooth does connect and works fine (paired with headphones)
Front/Rear cameras work as well as video - No gallery but Quickpic works fine
Soft and Hard keys work fine
Music player works
Havent gotten much else into it because I cant connect to wifi.
This this is FAST...boots quickly
EDIT 2:
PC recognizes it and I can access the internal and external drive via USB.
Did not charge when hooked up to PC, but charges fine when plugged into AC.
t-shock said:
Please let me know if
WIFI
Bluetooth
Microphone
Speakers
Camera (front & back)
Soft & Hard Keys
worked
If you faced any type of problem ( error while installing or fc) please let me know
Anwser on PM
Click to expand...
Click to collapse
Help Needed
I tried...
but
I get the message "MD5 mismatch"
I don't know what it means.....(sorry)
can you please guide me on this?
I have no problem backing up current rom and restore
I followed your installation guide
I had the same error message earlier when I tried it. same md5 mismatch.
I had downloaded the file 2.1 from my phone, extracted it, moved it into my tab, etc.
To fix it, I updated my Philz recovery to the latest one. 6.48.
I then downloaded the new 2.2 version by tshock into my computer.
I extracted it my computer, and then moved the folder to my Tabs sd card, into the
"clockworkmod/backup" folder.
it flashed perfectly then.
make sure you are on the latest philz. do all the extracting on your pc first, then move it over.
hope this helps.
Ed
also, I believe a "MD5 mismatch" error is when the downloaded file differs somehow from the original
one that was uploaded. whether it be a different size or different hash number (?), it is somehow different.
the original one is given a md5 number when it is uploaded, and after you download it, it should still be the
same number. if not, then its a mismatch.
choithestar said:
I tried...
but
I get the message "MD5 mismatch"
I don't know what it means.....(sorry)
can you please guide me on this?
I have no problem backing up current rom and restore
I followed your installation guide
Click to expand...
Click to collapse
TWRP for the HP Slate 21 Pro (ranger)
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* A lot.
*
TeamWin Recovery project (or TWRP for short) ported for the HP Slate 21 Pro (ranger).
Here are some images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
https://www.androidfilehost.com/?fid=24399994186369458
Install/Flashing Instructions:
1. You will need the following things in order to install TWRP on the Slate 21 Pro: 1 USB male to USB male connector, a computer with ADB and fastboot installed, common sense.
2. Turn off device and boot into fastboot mode (Volume Down + Power)
2.5. If your device won't boot into fastboot using that key combo. Enable USB Debugging on your Slate and run the following command from your computer with the Slate connected and on:
Code:
adb reboot-bootloader
3. Connect your device to your computer by plugging one end of the USB cord into the lone USB port on the left-hand side of the device and the other end on any USB port on your computer.
4. Run the command “fastboot oem unlock” (no quotes)
5. Select yes on your Slate 21 Pro, after this step you will lose all your data. Vol Up to move Up, Vol Down to move Down, Brightness Up to select.
6. After fastboot has been unlocked, you’ll need to flash TWRP to your recovery. Do do this run the following command:
Code:
fastboot flash recovery /path/to/downloaded/TWRP.img
Replace /path/to/downloaded/TWRP.img with where you downloaded TWRP provided by me (Quaesar). You can drag and drop the IMG into Terminal/CMD to do this easily.
7. Use the buttons on the side of the device to select “Recovery”
8. Profit! You now have the latest TWRP on your device!
Cyanogenmod 12.1:
Currently under development, this section will be updated when a stable build is achieved.
Donations:
You can donate to me for my hard work through PayPal. My donation email is [email protected]. Any and all donations are welcome regardless of amount. Thanks for supporting me!
Direct link: https://www.paypal.me/Quaesar
Credits
Building this was a collaborative effort. The following developers/beta testers helped me provide you with this:
Quaesar (me): Main person, started project, etc etc.
UnjustifiedDev: Device tree cleaning
jackshiloh: Spending extensive time testing and logging for me
Ed: Testing
If you have any comments or questions, reply to this thread and I'll get to you whenever I can
PLEASE HIT THAT THANKS BUTTON!!! IT REALLY SHOWS YOU APPRECIATE MY WORK!!!!!
Peace,
Quaesar
Changelog:
Public Release 1:
- First public release of recovery. Nothing major to see here
Known Issues/Bugs:
- If you wipe and try to install a ROM it'll say that the ROM couldn't install because /data was busy. Just Reboot > Recovery to fix this
FAQs:
Q: Bruhhhh, hook me up with dem sources
A: Dem sources can be found at teh GitHubs: (Link)
Q: Should I backup my stuff?
A: Do I need to answer that?
Q: On a scale of one to ten, how cool are you?
A: 11
Thanks dude! Can't wait for CM12 to finish!
cuoreesitante said:
Thanks dude! Can't wait for CM12 to finish!
Click to expand...
Click to collapse
Almost done actually, just need to fix networking (BT and Wifi) issues with the new kernel and all will be well!
Quaesar said:
Almost done actually, just need to fix networking (BT and Wifi) issues with the new kernel and all will be well!
Click to expand...
Click to collapse
Great!!!, thanks for your work!
any update on CM12? i am ready to wipe this bad boy and update it.
EMERYfan1988 said:
any update on CM12? i am ready to wipe this bad boy and update it.
Click to expand...
Click to collapse
Almost!!! Gonna fix Wifi and Bluetooth in kernel and it'll be ready for public consumption! It's just that Wifi and BT are a major pain in the *butt* to solve. It'll take a couple weeks but I'm not dropping this project no matter what!
Thanks for your continued support and enthusiasm!
Peace,
Quaesar
Quaesar said:
Almost!!! Gonna fix Wifi and Bluetooth in kernel and it'll be ready for public consumption! It's just that Wifi and BT are a major pain in the *butt* to solve. It'll take a couple weeks but I'm not dropping this project no matter what!
Thanks for your continued support and enthusiasm!
Peace,
Quaesar
Click to expand...
Click to collapse
/Bump/ :fingers-crossed:
panrix said:
/Bump/ :fingers-crossed:
Click to expand...
Click to collapse
Wifi and BT, turns out my source got corrupted somehow so I have to remake everything
Annoying but I can do it, it'll take a bit more time. Keep your fingers crossed!
Q
How's it coming?
how you doing friend? i'm still dreaming about having cm for this machine... hope you can make it possible!
EtherNomad said:
How's it coming?
Click to expand...
Click to collapse
Again, I've got pretty much everything except for Wifi and BT. Unfortunately, both ranger and phobos kernels are causing this issue. I'm in the the middle of different the old phobos with the new phobos to see changes, then apply them to the ranger kernel. I can't guarantee any timeframe for the release but at best, within the following month. Sorry to keep you guys waiting so long but this kernel is a real pain in the butt =P
Q
Is there a CM 12 for the Ranger anywhere online? I looked and all I've found is for the Phobos.
wkearney99 said:
Is there a CM 12 for the Ranger anywhere online? I looked and all I've found is for the Phobos.
Click to expand...
Click to collapse
Nope I'm making it right now however.
I just want to thank you for your work, a lot of ppl around the world is waiting for your work. I personally appreciate your effort.
Please don't forget about us and keep working!! <3
doncoyote.cl said:
I just want to thank you for your work, a lot of ppl around the world is waiting for your work. I personally appreciate your effort.
Please don't forget about us and keep working!! <3
Click to expand...
Click to collapse
Thanks a lot man! Really means a lot to me!! Just as a status update, I've tried contacted multiple revs and they all the that the issue is very weird. For more details look at my Phobis thread because they have the same issues at this point.
Quaesar said:
Thanks a lot man! Really means a lot to me!! Just as a status update, I've tried contacted multiple revs and they all the that the issue is very weird. For more details look at my Phobis thread because they have the same issues at this point.
Click to expand...
Click to collapse
Sorry, but can you link me to that thread?
Thank you
Quaesar said:
Thanks a lot man! Really means a lot to me!! Just as a status update, I've tried contacted multiple revs and they all the that the issue is very weird. For more details look at my Phobis thread because they have the same issues at this point.
Click to expand...
Click to collapse
It is great to see that someone is working on this. It will be a leap forward to get the HP nonsense off there.
I would be glad to help any way I can. If it would help, I do not use wifi or bt on my tablet. I use ethernet and usb. So if the rom is working otherwise, I would install it today.
qowieury said:
It is great to see that someone is working on this. It will be a leap forward to get the HP nonsense off there.
I would be glad to help any way I can. If it would help, I do not use wifi or bt on my tablet. I use ethernet and usb. So if the rom is working otherwise, I would install it today.
Click to expand...
Click to collapse
Sure mate, I'll PM you a link. Just remember, I'm not responsible for any damage done
Battery Problems Fix |Deep Sleep Fix & More
DISCLAIMER
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
I noticed that the HELIO x20 is quite power hungry chip and I created some tweaks to release the real power of battery + fix some bugs that are created by Xiaomi™ itself....
Some examples are:
1. Everyone has noticed that Redmi Pro has big battery drain in deep sleep (standby mode)
2. I dug around XDA MIUI devices forums for other devices and found out that Xiaomi MIUI roms use a service called 'perfservice' to control the CPU and can sometime be a hit and miss, so I did something
DISABLE PERFSERVICE and MY BATTERY LIFE HAS IMPROVED DRAMATICALLY.
What happens when perfservice is disabled is the cpu is controlled by MTK's cpu manager (not sure what it is called) and uses the stock interactive governer (which is good).
Now its fixing time
STEP ONE
this is for Redmi Pro devices only (Redmi Note 4 too)
1.Download View attachment 69TweaksOne.zip & View attachment 69TweaksTwo.zip
and flash them through TWRP Recovery.
AWARE
Flash 69TweaksOne first then flash 69TweaksTwo
Description: This will fix 1.deep sleep battery drain + 2.disable perfservice + 3.some other tweaks.
STEP 2
If you only have 1 SIM, it is highly recommended to go into single SIM mode to turn off the second modem service. Edit build.prop existing line from:
persist.radio.multisim.config=dsds to persist.radio.multisim.config=ss
STEP 3
Turn off Developer Options/Memory Optimization and MIUI Optimization. This is a legacy of the mcd service zram configuration that is disabled.
STEP 4
Remove inbuilt virus scanner(s)
Remove GuardProvider.apk and SecurityAdd.apk plus:
Code:
Code:
/system/lib64/libams-1.1.7-m-mfr.so
/system/lib64/libams-1.1.7-mfr.so
/system/lib64/libavast-utils.so
/system/lib64/libavast-vps-interface.so
/system/lib64/libavlasys.so
/system/lib64/libavlm.so
/system/lib64/libavlurl.so
STEP 5
Greenify + Amplify -(Need Xposed )
Install Greenify and Amplify and enable them on Xposed Framework
Take a look at this thread HERE
This thread is just a copy paste from other forums which are
1-Thanks to Jajk
2-Thanks to asusm930
3-Thanks to CosmicDan
that I wanted to post here for our Redmi Pro which is a really good device (it's Redmi's flagship isn't it). Redmi Pro has a good battery life and without modifying and now it will be Super Good .
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit THANKS button for me please
Very nice, thnx.
kremmit said:
Very nice, thnx.
Click to expand...
Click to collapse
???
Delete the Whetstone.apk and it's libs
Code:
libwhetstone_jni.so
libwhetstone_sdk.so
Click to expand...
Click to collapse
Do i delete them from lib and lib64?
Deleting from both it crashes battery saver at next boot.
kremmit said:
Do i delete them from lib and lib64?
Deleting from both it crashes battery saver at next boot.
Click to expand...
Click to collapse
1.on Lib section
2.what?
kristi6.9 said:
1.on Lib section
2.what?
Click to expand...
Click to collapse
so delete from lib folder, ok.
if you delete from lib and lib64 folder the battery saver will crash after you reboot the phone.
kremmit said:
so delete from lib folder, ok.
if you delete from lib and lib64 folder the battery saver will crash after you reboot the phone.
Click to expand...
Click to collapse
Ok , I have deleted only the lib ones not lib64.
Can You give me instructions how to complete this guide this is first time ever doing this, I have knowledge to do this. But please explain me proces will I edit some text script files or what?
reny123 said:
Can You give me instructions how to complete this guide this is first time ever doing this, I have knowledge to do this. But please explain me proces will I edit some text script files or what?
Click to expand...
Click to collapse
I have explained as good as I can if you cant understand it please make some searches on Google
Hi
can you explain how to do step 4?
just delete these files? or should I run some script? or maybe uninstall these apps using lucky patcher?
on step 5 can you provide direct link for XPOSED that works on XAIOMI REDMI PRO, I saw there version for Galaxy only.
Thanks
Shlomi
Why is removing whetstone not on the list anymore?
remove miui sistem and you will se awsome battery life
mr-blue001 said:
Hi
can you explain how to do step 4?
just delete these files? or should I run some script? or maybe uninstall these apps using lucky patcher?
on step 5 can you provide direct link for XPOSED that works on XAIOMI REDMI PRO, I saw there version for Galaxy only.
Thanks
Shlomi
Click to expand...
Click to collapse
just delete them..........
for xposed I will make a thread soon
kremmit said:
Why is removing whetstone not on the list anymore?
Click to expand...
Click to collapse
it is not that needed
criszz said:
remove miui sistem and you will se awsome battery life
Click to expand...
Click to collapse
have you tested it......or any bugs
Thanks but didn't understand if steps after zips flash are mandatory or optional...
epiteto said:
Thanks but didn't understand if steps after zips flash are mandatory or optional...
Click to expand...
Click to collapse
it depends ......example ( step 2 should be used only if you use one sim)
kristi6.9 said:
just delete them..........
for xposed I will make a thread soon[/QUO
Thanks
I'm waiting for this post.
Click to expand...
Click to collapse
kristi6.9 said:
it depends ......example ( step 2 should be used only if you use one sim)
Click to expand...
Click to collapse
Done it even if after step one the battery life was better . So modified build.prop
Step three done but reverted because of FC of settings when tried to go to settings/battery/ battery usage ( globe rom xiaomi .eu based).
Other steps not performed at the moment. Great results, it seems my battery can get empty in 150% of previous time and usage !!
Many thanks for this.
epiteto said:
Done it even if after step one the battery life was better . So modified build.prop
Step three done but reverted because of FC of settings when tried to go to settings/battery/ battery usage ( globe rom xiaomi .eu based).
Other steps not performed at the moment. Great results, it seems my battery can get empty in 150% of previous time and usage !!
Many thanks for this.
Click to expand...
Click to collapse
??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Earlier this ROM is exclusively built for pixel devices and Android one devices having ab partions but now their latest release also focus on Aonly devices also,So I decided to make it boot on our lovely whyred as it offers many different features along with complete pixel like experience that all u guys will love to have on ur device.
bugs
1.it will tell u to install PQA1 vendor on each reboot but simply ignore that.no need to worry.
2.Encryption.
3.You will tell.
Click to expand...
Click to collapse
Use only these links for Whyred, not that provided in other thread that thread is made exclusively for Mi A1.
Pre-requisite:
1.Mokee ROM(pick latest):
https://download.mokeedev.com/?device=whyred.
2.System image .xz file:
http://bit.ly/2S3bIJN
3.to get Volte working install this APK after boot and then reboot:
http://bit.ly/2qSh4Mj
4. For camera 2api flash this zip:
http://bit.ly/2QOK7vz
5.Latest firmware and Twrp.
Click to expand...
Click to collapse
Make sure that you had unzipped the .xz file before moving further
How to boot:
1.clean wipe(dalvik,data,cache,system,vendor).
2.install latest Mokee ROM.
3.boot into it and then return to recovery.
4 Now wipe dalvik, data ,cache,system.(Not vendor)
5.install pixel dust system image.
6.reboot.
Click to expand...
Click to collapse
For gcam head over to arnova's latest pixel 3 gcam 6.0.013 build After enabling camera 2 API.
Link(incase):
http://bit.ly/2DtYuSa
What's working in gcam :
All of the things including slowmo also
but back camera uhd 4k video recording not working.
For features head over to link shared below from where this arised.
XDA: DevDB Information
I would like to thank amarbajpai for the thread:
Link to thread for features:
http://bit.ly/2PCW7DV
ROM OS Version: 9.x Pie
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: release two
Stable Release Date: 2018-10-25
Created 2018-10-25
Last Updated 2018-11-14
If I find any updates then I will drop down below in future
But still I will be just sharing this rom so for any improvement wait for new updates or talk to other skilled Devs.
Thank you for sharing and for this new rom
Is there customisations/features (like status bar network indicator,...) ?
bayad said:
Thank you for sharing and for this new rom
Is there customisations/features (like status bar network indicator,...) ?
Click to expand...
Click to collapse
Head over to the thread at last of the post.
Thanx for sharing.. I ll definitely going to flash it when I got my bootloader unlocked☺
Screenshots
Nitin890 said:
Head over to the thread at last of the post.
Click to expand...
Click to collapse
Oh sorry, I posted comment quickly without seeing the link
Great work BTW
Fully edit of navbar buttons like double click and long press?
jacobobbo said:
Fully edit of navbar buttons like double click and long press?
Click to expand...
Click to collapse
Please check
Anyone installed??
BTW U can use derp kernel of u want and lift to check phone gesture is occasionally working rest all is great.
MTP connection doesn't work on this rom
So.. I've done everything with instruction and my phone is rebooted to fast boot.... I've done this twice and the resoult ist 1 hour of wasting my time. Thanks !
jacobobbo said:
So.. I've done everything with instruction and my phone is rebooted to fast boot.... I've done this twice and the resoult ist 1 hour of wasting my time. Thanks !
Click to expand...
Click to collapse
Can u please tell which ROM and recovery u are using and what u exactly did because I am currently running this ROM without any problem.
mrcandy108 said:
MTP connection doesn't work on this rom
Click to expand...
Click to collapse
My feedback after few hours on this rom :
- MTP connection not working as said above
- The brightness leans towards the red
- No camera preinstalled
- No FM Radio
Hope all these bugs will be fixed in future builds
Please let me know the odd or best features of this ROM which u liked most.
For me I liked the breathtaking wallpapers,the Shishu nights dark theme and dark theme in file manager.
bayad said:
My feedback after few hours on this rom :
- MTP connection not working as said above
- The brightness leans towards the red
- No camera preinstalled
- No FM Radio
Hope all these bugs will be fixed in future builds
Click to expand...
Click to collapse
I can't change font on this rom. If i try replace folder font, my phone will get bootloop
Nitin890 said:
Please let me know the odd or best features of this ROM which u liked most.
For me I liked the breathtaking wallpapers,the Shishu nights dark theme and dark theme in file manager.
Click to expand...
Click to collapse
All features are great, even the wallpapers (but you cannot set a wallpaper for lockscreen ).
If all the bugs in my previous post are fixed, it'll be a great rom
mrcandy108 said:
I can't change font on this rom. If i try replace folder font, my phone will get bootloop
Click to expand...
Click to collapse
Try magisk module MidnightCore for that.
My device is also rebooting to fastboot.
I flashed the following Mokee Rom : MK81.0-whyred-201811181746-Nightly.zip
I use TWRP 3.2.3-1
I followed the steps exactly as in the instructions.
What am I missing?
Partha
partha_rc said:
My device is also rebooting to fastboot.
I flashed the following Mokee Rom : MK81.0-whyred-201811181746-Nightly.zip
I use TWRP 3.2.3-1
I followed the steps exactly as in the instructions.
What am I missing?
Partha
Click to expand...
Click to collapse
Use Twrp 3.2.3-0 posted on 7-31 on official Twrp website.
Or
if u are still not able to boot then I can post my Twrp backup of whole ROM but
do let me know that.
partha_rc said:
My device is also rebooting to fastboot.
I flashed the following Mokee Rom : MK81.0-whyred-201811181746-Nightly.zip
I use TWRP 3.2.3-1
I followed the steps exactly as in the instructions.
What am I missing?
Partha
Click to expand...
Click to collapse
Use Twrp 3.2.3-0 posted on 7-31 on official Twrp website.
Please read updated post
Or
if u are still not able to boot then I can post my Twrp backup of whole ROM but
do let me know that.