Related
Hello, i flashed I9003XXKPQ_SERKPQ_Android_2.3.6 which is a single PDA file with re-partition and pit...now my phone restarts continuously and hangs on logo. Original PDA of the phone is i9003JPKPE android 2.3.6. I read somewhere to flash this phone with kpe which is all 4 files. I downloaded this file from tsar3000 site but it is only single PDA file...
Someone out there please help
andrew21 said:
Hello, i flashed I9003XXKPQ_SERKPQ_Android_2.3.6 which is a single PDA file with re-partition and pit...now my phone restarts continuously and hangs on logo. Original PDA of the phone is i9003JPKPE android 2.3.6. I read somewhere to flash this phone with kpe which is all 4 files. I downloaded this file from tsar3000 site but it is only single PDA file...
Someone out there please help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=22750786
Download xxkpq and xxkpe from this thread.
First flash with pit file with re partition checked.
Then flash xxkpe twice with re-partition unchecked.
Then flash xxkpq..
Do factory reset between each flash..
send from gt-i9003 using android keyboard
try another kernel!
hey,
i had the same problem.
try to use another kernel!
sirilpta said:
http://forum.xda-developers.com/showthread.php?p=22750786
Download xxkpq and xxkpe from this thread.
First flash with pit file with re partition checked.
Then flash xxkpe twice with re-partition unchecked.
Then flash xxkpq..
Do factory reset between each flash..
send from gt-i9003 using android keyboard
Click to expand...
Click to collapse
WHich file to flash first with pit file and repartition?
I checked the deposit file link...it gives only xxkpq for download....where do i download xxkpe from?
thanks for your help
andrew21 said:
I checked the deposit file link...it gives only xxkpq for download....where do i download xxkpe from?
thanks for your help
Click to expand...
Click to collapse
The link he gave you is for a xxkpq with 4 files.Flash all those files through odin and you wont need xxkpe.
On the other hand if you still want to install kpe first then go here
http://forum.xda-developers.com/showthread.php?t=1004647
and download from the hotfile link given and flash the 4 files
then flash only xxkpq without repartition
devilhell007 said:
The link he gave you is for a xxkpq with 4 files.Flash all those files through odin and you wont need xxkpe.
On the other hand if you still want to install kpe first then go here
http://forum.xda-developers.com/showthread.php?t=1004647
and download from the hotfile link given and flash the 4 files
then flash only xxkpq without repartition
Click to expand...
Click to collapse
Guess what i flashed 4 files with xxkpq and phone is alive and working again.....thanks!!
andrew21 said:
Hello, i flashed I9003XXKPQ_SERKPQ_Android_2.3.6 which is a single PDA file with re-partition and pit...now my phone restarts continuously and hangs on logo. Original PDA of the phone is i9003JPKPE android 2.3.6. I read somewhere to flash this phone with kpe which is all 4 files. I downloaded this file from tsar3000 site but it is only single PDA file...
Someone out there please help
Click to expand...
Click to collapse
andrew21 said:
Guess what i flashed 4 files with xxkpq and phone is alive and working again.....thanks!!
Click to expand...
Click to collapse
good to hear. fyi for the future, only select repartition when using the pit file, and only do the pit file by itself. do not repartition just for pda, and do not combine pit with anything else when flashing.
since you happen to be one of the first "guinea pigs" for flashing the new set of files for KPQ, please leave feedback later
Galaxy S GT-i9003 Flashing to JPKPC
I'm in the UAE and have a Galaxy S GT-i9003 and I decided to flash to I9003JPKPH_I9003OJPKPC_XSG firmware.
I chose to follow these instructions: http://forum.xda-developers.com/showthread.php?t=1004622
I downloaded Odin and all the relevant files but I stupidly failed to read ahead and flashed with the .PIT file when it was unnecessary.
I then tried to flash with the I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 file in the PDA slot with Repartition unchecked.
My phone will not start, it just loops through the startup screens.
What is the best thing for me to do now? I still want to flash to I9003JPKPH_I9003OJPKPC_XSG.
PLEASE HELP!!!
AzeemMobile said:
I'm in the UAE and have a Galaxy S GT-i9003 and I decided to flash to I9003JPKPH_I9003OJPKPC_XSG firmware.
I chose to follow these instructions: http://forum.xda-developers.com/showthread.php?t=1004622
I downloaded Odin and all the relevant files but I stupidly failed to read ahead and flashed with the .PIT file when it was unnecessary.
I then tried to flash with the I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 file in the PDA slot with Repartition unchecked.
My phone will not start, it just loops through the startup screens.
What is the best thing for me to do now? I still want to flash to I9003JPKPH_I9003OJPKPC_XSG.
PLEASE HELP!!!
Click to expand...
Click to collapse
you could follow these steps mentioned here..
http://forum.xda-developers.com/showthread.php?t=1133787
AzeemMobile said:
I'm in the UAE and have a Galaxy S GT-i9003 and I decided to flash to I9003JPKPH_I9003OJPKPC_XSG firmware.
I chose to follow these instructions: http://forum.xda-developers.com/showthread.php?t=1004622
I downloaded Odin and all the relevant files but I stupidly failed to read ahead and flashed with the .PIT file when it was unnecessary.
I then tried to flash with the I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 file in the PDA slot with Repartition unchecked.
My phone will not start, it just loops through the startup screens.
What is the best thing for me to do now? I still want to flash to I9003JPKPH_I9003OJPKPC_XSG.
PLEASE HELP!!!
Click to expand...
Click to collapse
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003JPKPH
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install JPKPH.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5" in your PDA and flash.
U are now on JPKPH.
pranshah said:
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003JPKPH
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install JPKPH.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5" in your PDA and flash.
U are now on JPKPH.
Click to expand...
Click to collapse
Please inform is it applicable to all the I9003 users, since I am facing the same problem.
tricker_me said:
Please inform is it applicable to all the I9003 users, since I am facing the same problem.
Click to expand...
Click to collapse
I have not checked with other FW, but as far as I believe, it will be applicable to all I9003 users.
Yes. It is applicable to all sl users
Sent from my GT-I9003 using xda premium
i am having the same problem
I tried to update the firmware of two i9003 via KIES.
One succeed but another keeps restarting.
Then I have flashed several offical roms, flashed XXKPE twice but still stop at samsung logo.
what else can I do to save the phone??
When I wipe data in recovery mode there is an error:E:format_volume: rfs format failed on /dev/block/mmcblk0p3.
And before I update the firmware, when I took a photo, the photo disappear after restarting the phone.
Do these related to the problem?
When you flash the kpe, did you flash the pit file first before flashing the 4 file?
Sent from my GT-I9003 using xda premium
icephatom said:
When you flash the kpe, did you flash the pit file first before flashing the 4 file?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
yes i did.
first I wiped data and cache.
I flashed pit file with re-partition.
then flashed those 4 files without re-partition.
and waited until the phone went to recovery mode automatically.
wiped data and cache.
Then took out the battery to turn off the phone and put it back.
and flashed 4 files again.
Was I doing anything wrong
You cleared data and cache and let it startup fully before you pull out battery?
Sent from my GT-I9003 using xda premium
yes
but the error E:format_volume: rfs format failed on /dev/block/mmcblk0p3 appeared
i to had the same problem
just did a clean flash and used Amit bagaria's Universal root
:laugh:
Samsung Galaxy SL Flash problem?
i have put .pit file using odin now my mobile wont start.i rooted my Galaxy sl and was trying to flash a rom by using this thread http://forum.xda-developers.com/showthread.php?t=1004622 but after 7th step i don't know what to do so i restart my phone and it wont start.please help
jagwant said:
Samsung Galaxy SL Flash problem?
i have put .pit file using odin now my mobile wont start.i rooted my Galaxy sl and was trying to flash a rom by using this thread http://forum.xda-developers.com/showthread.php?t=1004622 but after 7th step i don't know what to do so i restart my phone and it wont start.please help
Click to expand...
Click to collapse
After 7th step just switch off phone by pulling out battery. Then go to download mode & then start from 8th step. It is as simple as that. Dont worry
vishal24387 said:
After 7th step just switch off phone by pulling out battery. Then go to download mode & then start from 8th step. It is as simple as that. Dont worry
Click to expand...
Click to collapse
i am from india and i don't know which files to load in CSC,PDA Bootloader Phone
http://forum.xda-developers.com/showthread.php?t=1707712 i have downloaded this rom
can i just start my phone without flashing a new rom please help
jagwant said:
i am from india and i don't know which files to load in CSC,PDA Bootloader Phone
http://forum.xda-developers.com/showthread.php?t=1707712 i have downloaded this rom
can i just start my phone without flashing a new rom please help
Click to expand...
Click to collapse
I am also from India. In india DDLF2 rom is latest official firmware. Download DDLF2 rom from here.
http://forum.xda-developers.com/showthread.php?t=1741370
vishal24387 said:
I am also from India. In india DDLF2 rom is latest official firmware. Download DDLF2 rom from here.
http://forum.xda-developers.com/showthread.php?t=1741370
Click to expand...
Click to collapse
what about CSC,PDA,Bootloader,Phone files are they included in this rom
is there any that i can just start my phone without flashing a new rom please help
Look buddy u have to understand flashing procedure in detail. First you have to download XXKPE rom. Download XXKPE rom from here.
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Download odin software from here
forum.xda-developers.com/attachment.php?attachmentid=1254464&d=1344665129
Now follow following procedure
1. Unzip XXKPE firmware zip file.
2. Run Odin software.
3. Check Re-Partition, Auto Reboot and F. Reset
Time.
4. Click PIT button and select this file:
latona_20110114.pit
5. Set it to download mode : Press Volume
down + OK first, then hold Power button.
6. Connect USB cable and the program will
detect the phone's Com number.
7. Click Start button to download the PIT file to
phone.
8. After it is Done Click on Reset button
[Partition box should be unchecked
automatically]
9. Click PDA button and select this file:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file:
MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this
file:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-
I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove
battery, insert battery and bring it back to
download mode. I have never been able to
bring it to download mode with usb plugged in.
14. Click Start button to flash these files to
phone.
15. Do not touch anything till you see PASS on
the program window.
16. Factory reset
Click to expand...
Click to collapse
Now when ur phone will start u can see that XXKPE rom is flashed on ur phone successfully.
Now next step is to flash DDLF2 rom. Unzip DDLF2 zip file. You will get I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5 file having size nearly 300-350 mb. So just turn off phone & go to download mode again. Run odin & select this .md5 file in pda option & then flash it. Thats it buddy. When ur phone will turn on you will observe DDLF2 rom is flashed on ur phone
vishal24387 said:
Look buddy u have to understand flashing procedure in detail. First you have to download XXKPE rom. Download XXKPE rom from here.
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Download odin software from here
forum.xda-developers.com/attachment.php?attachmentid=1254464&d=1344665129
Click to expand...
Click to collapse
after that
jagwant said:
after that
Click to expand...
Click to collapse
See above post. I have given all steps.
vishal24387 said:
See above post. I have given all steps.
Click to expand...
Click to collapse
thanks i will this rom next morning.
but i have flashed this rom http://forum.xda-developers.com/showthread.php?t=1707712
now my phone is stuck in rebooting loop
jagwant said:
thanks i will this rom next morning.
but i have flashed this rom http://forum.xda-developers.com/showthread.php?t=1707712
now my phone is stuck in rebooting loop
Click to expand...
Click to collapse
Dont worry just do what I have said buddy
vishal24387 said:
Look buddy u have to understand flashing procedure in detail. First you have to download XXKPE rom. Download XXKPE rom from here.
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Download odin software from here
forum.xda-developers.com/attachment.php?attachmentid=1254464&d=1344665129
Now follow following procedure
1. Unzip XXKPE firmware zip file.
2. Run Odin software.
3. Check Re-Partition, Auto Reboot and F. Reset
Time.
4. Click PIT button and select this file:
latona_20110114.pit
5. Set it to download mode : Press Volume
down + OK first, then hold Power button.
6. Connect USB cable and the program will
detect the phone's Com number.
7. Click Start button to download the PIT file to
phone.
8. After it is Done Click on Reset button
[Partition box should be unchecked
automatically]
9. Click PDA button and select this file:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file:
MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this
file:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-
I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove
battery, insert battery and bring it back to
download mode. I have never been able to
bring it to download mode with usb plugged in.
14. Click Start button to flash these files to
phone.
15. Do not touch anything till you see PASS on
the program window.
16. Factory reset
Click to expand...
Click to collapse
Now when ur phone will start u can see that XXKPE rom is flashed on ur phone successfully.
Now next step is to flash DDLF2 rom. Unzip DDLF2 zip file. You will get I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5 file having size nearly 300-350 mb. So just turn off phone & go to download mode again. Run odin & select this .md5 file in pda option & then flash it. Thats it buddy. When ur phone will turn on you will observe DDLF2 rom is flashed on ur phone
Click to expand...
Click to collapse
i have done the same procedure on firnd's i9003, but next firmware was JPKPH[instead of DDLF2] 2.3.6,... with it's .tar.md5... now my friend is experiencing some cell signals drop, with call drop and sms sending fail..! any resolution for this..!!
Hello friends,
I had been running LF2 for the past few months successfully but i had installed Frankenstein's Mod which i did not prefer over stock due to stability issues. Now when i reflashed LF2 with the PIT file, My device doesnt boot up and keeps restarting after showing the Samsung page. I had to install XXKPQ which is Serbian i suppose to successfully recover my device and it updated to LE4 via Kies.
I am having stability issues now with LE4 and extremely poor battery life.
Please can anybody guide me how do i get back my LF2 again so please tell me which ROM should i Flash before
Thank you!
ronak_143 said:
Hello friends,
I had been running LF2 for the past few months successfully but i had installed Frankenstein's Mod which i did not prefer over stock due to stability issues. Now when i reflashed LF2 with the PIT file, My device doesnt boot up and keeps restarting after showing the Samsung page. I had to install XXKPQ which is Serbian i suppose to successfully recover my device and it updated to LE4 via Kies.
I am having stability issues now with LE4 and extremely poor battery life.
Please can anybody guide me how do i get back my LF2 again so please tell me which ROM should i Flash before
Thank you!
Click to expand...
Click to collapse
If you want stability and battery life, perhaps XXKPQ is for you.. the best ROM in my opinion is XXKPQ and JPKPH
Sent from my GT-I9100 using xda premium
Ok guys i've found out the solution for those who want their default indian roms in their devices
DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily
ronak_143 said:
Ok guys i've found out the solution for those who want their default indian roms in their devices
DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily
Click to expand...
Click to collapse
That's great that you found it!
Sent from my GT-I9100 using xda premium
saywhatt said:
That's great that you found it!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Alas, it failed though. It does a factory reset every time i restart the phone Any suggestions how to repair this now
ronak_143 said:
Alas, it failed though. It does a factory reset every time i restart the phone Any suggestions how to repair this now
Click to expand...
Click to collapse
I think you need a clean install from scratch.
Here the guides on how to --> http://forum.xda-developers.com/showthread.php?t=1133787
ronak_143 said:
Ok guys i've found out the solution for those who want their default indian roms in their devices
DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily
Click to expand...
Click to collapse
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003DDLF2 (http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html)
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install DDLF2.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" in your PDA and flash.
U are now on DDLF2.
pranshah said:
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003DDLF2 (http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html)
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install DDLF2.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" in your PDA and flash.
U are now on DDLF2.
Click to expand...
Click to collapse
Works perfectly Thank you!
Being that there have been alot of request for this when people have problems during rooting and taking OTA's I decided to pull the Stock recovery and post it.
How to Install:
Using odin:
Download and install the Samsung drivers
Download the img or tar
Download Odin 3.10.6 for best results
Leave Auto reboot and F. Reset Time checked
Absolutely do not check repartition
Click AP/PDA
Navigate to the recovery.tar
Click Start
Done!!
In rare events of issues with incomplete firmware installations, you may need to try a different USB cable.
Flash At Your Own Risk
Download Links:
Tar File
Img File
I have a Note 5 from Tmobile. I installed deodexed EQK1 from Metabolic. Well now I am trying to go back to stock. After wiping everything, and trying to install any stock zip from Sammobile, it keeps saying the zip file is corrupt. Can someone please help?
gatorsneil75 said:
I have a Note 5 from Tmobile. I installed deodexed EQK1 from Metabolic. Well now I am trying to go back to stock. After wiping everything, and trying to install any stock zip from Sammobile, it keeps saying the zip file is corrupt. Can someone please help?
Click to expand...
Click to collapse
The zip you downloaded from sammobile can only be used with Odin. You can't flash that in recovery. Download Odin on your pc and be sure to enable usb debugging in settings. Move the zip from sammobile to your pc and extract the zip. You should have one file that extracts from the zip. Boot your phone into download mode and plug it into your computer, open Odin and you should see a connected device. In the AP slot of Odin open the file from the zip and let it confirm your md5. After it verifies the md5, open options and turn off auto reboot. Turn on bootloader update and F Reset time. Flash the file and once it completes hold the download mode buttons until the screen turns black. Now you MUST BOOT into recovery TWICE. After the two recovery boots it should boot back to stock.
DUH. I am on pain meds, and was not even thinking that all files from Sammobile are for Odin. Thanks very much Metabolic, and thanks for your hard work as well
Metabolic12 said:
The zip you downloaded from sammobile can only be used with Odin. You can't flash that in recovery. Download Odin on your pc and be sure to enable usb debugging in settings. Move the zip from sammobile to your pc and extract the zip. You should have one file that extracts from the zip. Boot your phone into download mode and plug it into your computer, open Odin and you should see a connected device. In the AP slot of Odin open the file from the zip and let it confirm your md5. After it verifies the md5, open options and turn off auto reboot. Turn on bootloader update and F Reset time. Flash the file and once it completes hold the download mode buttons until the screen turns black. Now you MUST BOOT into recovery TWICE. After the two recovery boots it should boot back to stock.
Click to expand...
Click to collapse
TY my friend. A little high on pain medication ATM
Funny how the brain can completely stop you from being able to find info stored away in there just from a little demerol LOL. And then you get frustrated and make it worse!
EFS Partition
Hi I have a Tmobile note 5 too can you link me your efs partition or give me advice i dont have imei.
[email protected]