Database Info

Proximity issue and Battery stuck at 99%

Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar

Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Bro calibrate your battery using "battery calibration" from play store...and follow the instructions given in the App properly....hopefully that will solve the problem...

Ak****banta said:
Bro calibrate your battery using "battery calibration" from play store...and follow the instructions given in the App properly....hopefully that will solve the problem...
Click to expand...
Click to collapse
Thank you for your response.
Regarding battery calibration I already tried but it says calibrate battery at 100% which is not possible because the battery stucks at 99% and does not proceed further.

Please un select the option 100% which is in green at the bottom. Then you can calibrate at 99% as well.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app

pcoruganti said:
Please un select the option 100% which is in green at the bottom. Then you can calibrate at 99% as well.
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
Yeah buddy i tried of calibrating at 99% by unchecking that option but the problem still persist.
Today I flashed Stock ROM JB from Paplu 3 in a a hope that the issue will be resolved but again i got disppointed. Please help me in fixing the proximity and battery issues.

Nutankumar said:
Yeah buddy i tried of calibrating at 99% by unchecking that option but the problem still persist.
Today I flashed Stock ROM JB from Paplu 3 in a a hope that the issue will be resolved but again i got disppointed. Please help me in fixing the proximity and battery issues.
Click to expand...
Click to collapse
Today I flashed Stock v2 using SP flash tools and my proximity sensor started working again.. later on I rooted my phone and flashed JMP v9 but again the proximity issue started.. please help me what should i do. Or else guide me is it ok to replace boot.img file from stock v2 to jmp v9. I am confused.

Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Today I flashed Stock v2 using SP flash tools and my proximity sensor started working again.. later on I rooted my phone and flashed JMP v9 but again the proximity issue started.. please help me what should i do. Or else guide me is it ok to replace boot.img file from stock v2 to jmp v9. I am confused.

Nutankumar said:
Hi everyone,
I have installed JMP v 8.0 custom ROM in my MMX A110.
The ROM is pretty good but i am facing mainly two issues.
1. Proximity Sensor Not working though previously it was working with stock ROM. I read about replacing boot.img file but not sure how to do that.
2. Battery stuck at 99%: When I charge the mobile battery it gets stuck at 99% as soon as I switch of the mobile it reaches 100% but again if I start my mobile then the indicator turns red and battery goes back to 99%. I tried using battery calibration bu was only able to calibrate at 99% at it never reaches to 100% and also tried to clear battery stats from advance panel but all in vain. The problem still persist.
Please help me in providing the solutions for the same.
Thank you,
Nutankumar
Click to expand...
Click to collapse
Ur facing this problem while charging through PC or through power socket.
Try disconnecting the charger and again try to reconnect it. It worked for me

Padmanappa said:
Ur facing this problem while charging through PC or through power socket.
Try disconnecting the charger and again try to reconnect it. It worked for me
Click to expand...
Click to collapse
t I have done simply after flashing a rom, calibrate my battery on 99%. unplug it. after unplugging it discharge it until it show me 1 percent remaining battery then plug it again with my laptop and after all night charging when I wake up the light is green and shows me 100%. Try this..

Jazzy_1 said:
t I have done simply after flashing a rom, calibrate my battery on 99%. unplug it. after unplugging it discharge it until it show me 1 percent remaining battery then plug it again with my laptop and after all night charging when I wake up the light is green and shows me 100%. Try this..
Click to expand...
Click to collapse
Thanks ..will try and let u know

Nutankumar said:
Thanks ..will try and let u know
Click to expand...
Click to collapse
tried wat u said but still showing 99% also I noticed sudden fall in battery and also my canvas2 heats up a lot on call..Problems have been increased..please help

Canvas 2 Battery stuck at 99%.. :/
Nutankumar said:
tried wat u said but still showing 99% also I noticed sudden fall in battery and also my canvas2 heats up a lot on call..Problems have been increased..please help
Click to expand...
Click to collapse
hey nutankumar..
i am also having the same issue.. but I didn't change the ROM though.. my canvas 2 is just 4 days old.. but i am facing battery issue... while charging its stuck at 99%.. if i switch it off then it shows 100%.. but after switching on.. it shows again 99%... i am seriously troubles..
please help me out.....! !anyone ??? please...

[Q] Galaxy R stop boot after flash Avatar ROM

Hello guys and sorry for my english.
I flashed my phone. Since flash it will not boot.
Used software: cwm 4.0.0.1 and avatar-beta_3.1-.
After the first start, I can only see the avatar mask animation (for hours). If I disconnect the power cord, and wait until the battery drops below 12%. Surprise...android start with this message, "the battery is almost empty".
Yes, i have only one way to start my phone. Waiting for battery drop under 12%....
The standart ROM I can not flash because ODIN dont detect my phone in download mode more. I dont know why. Before flash it works finde with ODIN.
If some one have any Ideas to help me.... pls tell :laugh:

SamysSmile said:
Hello guys and sorry for my english.
I flashed my phone. Since flash it will not boot.
Used software: cwm 4.0.0.1 and avatar-beta_3.1-.
After the first start, I can only see the avatar mask animation (for hours). If I disconnect the power cord, and wait until the battery drops below 12%. Surprise...android start with this message, "the battery is almost empty".
Yes, i have only one way to start my phone. Waiting for battery drop under 12%....
The standart ROM I can not flash because ODIN dont detect my phone in download mode more. I dont know why. Before flash it works finde with ODIN.
If some one have any Ideas to help me.... pls tell :laugh:
Click to expand...
Click to collapse
try to install using latest CWM or TWRP.. Also, do full wipe.

[Q] [ZTE V970m] Critical Battery Shutdown Problem

Hi,
I own a ZTE v970m (duh) and I am running superdragonpt's [WIP] [JB 4.2.2] ZTE v970/v970m (MT6577) ROM.
I was running bgcngm's ROM before I flashed this one.
This has happened before, but after hours of searching the web I could not find a answer, so here I am.
With some ROMs I've flashed (including the current one) my phone somehow stops shutting down automatically when the battery reaches <1% (btw I still get the Low Battery warning at 15%), what happens is that, when it runs empty, suffers a hard shutdown (duh) and when I put it charging and I try to turn it on (even hours of charging later) I get a black screen (attachment) with a battery icon, some green bars and a hourglass. And a Bolt (no pun intended) :laugh:
When this happens I usually lose my phone for 1-3 days, so if anyone could help, I'd be greatly appreciated.
PS: I really wanna stay with this ROM, so I'm kinda hoping for a fix/another 4.2 ROM for this phone.
PSS: Just remembered the red notification light switches on/off from time to time 30s-1m(maybe)
Sorry for the pic. quality :c
Thanks.

[Forgot to Mention]
I'm using the stock kernel (probably :B).
Was going to flash this one http://forum.xda-developers.com/showthread.php?t=2698984 but ran out of juice 1st.
Phone is charging since the 1st post, waiting for it to come back to life, no SIM nor SD inserted just because. Also if you know how to skip this battery icon charging stuff (or make it take less time) I'd be thankful.
So if any of you needs more info, just ask.
And, hopefully I have put this on the correct forum :fingers-crossed:
-waiting on replies-
Thanks,

UPDATE
Finally got it to boot! :victory:
Holded POWER + VOL DOWN for a century and got to the factory mode screen -> which looked like this (1.jpg)
After failing to read :silly: I found this (translation credits to: CarriePW):
1. factory mode
2. complete test
3. single ** test (not clear)
4. test report
5. clear.mmc
6. version information
7. reboot the phone
So, I'll try to flash the kernel now, and see if the problem remains
Pending Questions:
Is there any other 4.2 Android ROM for this phone (that's not MIUI or LewaOS)? Or a fix for this one?
To anyone that flashed this ROM, did this ever happened to you?
Could it be the kernels fault? (In all of the ROMs I've ever flashed, I never did touch the kernel, so..)
Can I flash another factory mode? (In a language I can understand '-')
And, if I'm being a noob, please take the time to kindly reprehend me
Thanks,

BUMP(?)
Same problem yesterday..
Thinking of going back to the (rooted) stock ROM.. (Opinions?)
A [Q]: If I choose "wipe battery stats" on my CWM-based recovery, could it help?
PS: Using bgcngm's [4.1.1] 1.3MOD ROM now.. with superdragonpt's kernel.

BUMP
A little help here? :/

Weird sudden death

Hi all.
I have searched this forum (I know it's very frowned upon to start a thread without doing so) but the symptoms don't completely match my issue so I've resorted to asking.
I have a Nexus 5, which I was using as a hotspot, tethering to an Amazon fire stick, when it switched itself off.
It hasn't booted since, I've tried all possible button combinations for up to 2 minutes and still nothing.
If connected to a charger I get the white battery icon with the lightning bolt for a few seconds then blank screen, this will loop until unplugged.
When I have the battery icon on screen I can hold power button and it will display "Google" and vibrate as if starting to boot, then go blank again.
Have reinstalled original battery and the symptoms remain the same.
Am on marshmallow 6.0.1 totally stock am also out of warranty.
Any ideas would be greatly appreciated.
Thanks in advance.

Try to boot in bootloader mode if it boots connect to it comp and then unlock the bootloader if not and install latest Twrp if not then flash a custom rom and boot it then flash factory images .. Done. Back to Stock!
Try booting in bootloader mod while connecting it do the charger. (Wall charger )

pranavmali said:
Try to boot in bootloader mode if it boots connect to it comp and then unlock the bootloader if not and install latest Twrp if not then flash a custom rom and boot it then flash factory images .. Done. Back to Stock!
Try booting in bootloader mod while connecting it do the charger. (Wall charger )
Click to expand...
Click to collapse
Thanks for the suggestion but can't get into bootloader mode, it's only alive for about 3-4 seconds if plugged in then it goes off and then back to the white battery.

J_The_Nerd said:
Thanks for the suggestion but can't get into bootloader mode, it's only alive for about 3-4 seconds if plugged in then it goes off and then back to the white battery.
Click to expand...
Click to collapse
Mother board problem or change try changing ur battery... Surely Mother Board problem! Coz while u were connected to a hotspot and then u switched off it.. The battery would suddenly undervolt ur motherboard... And Undervolting id Very Very bad even if u change it from software or hardware...This had happen to my Sis nexus 5. .. So given it a chance changing the battery! Coz that helped Me.. But also try booting in bootloader mod and flashing twrp it will save couple of Bucks and Time
Press the thanks button if this helps

I would replace the battery first. It seems like the battery was completely drained while hotspotting.
Are you using the original USB cable and charger that came with the phone?

audit13 said:
I would replace the battery first. It seems like the battery was completely drained while hotspotting.
Are you using the original USB cable and charger that came with the phone?
Click to expand...
Click to collapse
Yes using the original charger, still does the same on power bank and old Samsung charger.
I'll give a battery swap another go.

pranavmali said:
Mother board problem or change try changing ur battery... Surely Mother Board problem! Coz while u were connected to a hotspot and then u switched off it.. The battery would suddenly undervolt ur motherboard... And Undervolting id Very Very bad even if u change it from software or hardware...This had happen to my Sis nexus 5. .. So given it a chance changing the battery! Coz that helped Me.. But also try booting in bootloader mod and flashing twrp it will save couple of Bucks and Time
Press the thanks button if this helps
Click to expand...
Click to collapse
If battery swap doesn't help is the motherboard easy to swap out? Providing I can find a replacement?

Motherboard is very easy to swap out.

Update, put original battery back in for the second time, first time didn't make a difference, possibly took longer this time. But all is good now.
Thanks to all

Change offline charging animation(While device is powered off) on Lineage OS.

Hey,
I'm running Lineage OS 14.1 on Merlin.
I want to change the offline Charging animation when we plug it in while the phone is switched off.
Any suggestions how to change that animation?

I think there was a binary called `charge-only-mode`, located in `/system/xbin`, but I'm not completely sure

jatin28 said:
Hey,
I'm running Lineage OS 14.1 on Merlin.
I want to change the offline Charging animation when we plug it in while the phone is switched off.
Any suggestions how to change that animation?
Click to expand...
Click to collapse
Good question I'm also searching for the solution

i also want to change bcoz i m getting a Question Mark In Battery Box...

Himanshu.Shukla said:
i also want to change bcoz i m getting a Question Mark In Battery Box...
Click to expand...
Click to collapse
Me too

zamazu said:
Me too
Click to expand...
Click to collapse
i googled for it there is no option ????

Is there anyone who noticed that after the animation instead of switching off, the screen just gets darker and don't fully turn off?

some better charging animation then the custom lineage os one