My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
dwl99 said:
My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
Click to expand...
Click to collapse
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
DigitalMD said:
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
Click to expand...
Click to collapse
Thanks but Odin cannot see the tablet to re-flash the recovery.
Downlods mode
Then flash new firmware
sembre said:
Downlods mode
Then flash new firmware
Click to expand...
Click to collapse
That's the problem - I cannot access download mode
UPDATE - it just started in download mode! I can manage from here!!
Just for the record you can install adb on the pc and run the command 'adb reboot recovery'. This will force the tablet to reboot in recovery mode.
Sent from my GT-I9300 using xda app-developers app
Jeez, this has taken up most of the day to fix. I came across many problems I have not previously experienced:
1. When the tablet was stuck at the boot animation and I tried to turn it off by long-pressing the power button it immediately restarted. The only way I could get it to turn off was by long-pressing the power button whilst it was connected to my PC.
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
3. Flashing CWM with Odin caused the tablet to reboot into the stock ROM which would not load, in the end I had to untick the "reboot" button in Odin, power it off then manually restart with the Vol- & power buttons.
4. The only way I could get a bootable ROM was by flashing CM10 with CWM. I tried to restore 2 previous CWM backups but on each occasion there was an error restoring the Data partition and I got stuck at the scenario at (1). The backups were made to the external SD card with CWM Touch - is the Touch version unreliable?
I would be really interested if anyone could shed any light on any of this stuff!
For how long did you let it install during the first reboot? It happened to me too, and it took about 10 minutes, maybe even more...
Also, did you try in the "Mount and storage" cwm menu the options "format system", "format data", "format cache" and "format preload" options, prior to re-flashing a ROM? I have read somewhere that for a clean install it's better to do this, as it really clears everything that could mess up the system between two different bases ROMs (like CM and stock).
What I do everytime is using in CWM these 4 "format" options, plus "wipe" system, cache and dalvik, then immediately after this I flash with cwm the new "zip" copied on the card. Then the first reboot is much longer than usual, as at this stage it installs the files, rebuild the dalvik cache etc.
Good luck
dwl99 said:
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
Click to expand...
Click to collapse
I think I gave it a good 20 mins to boot. When I got up this morning there was an error message saying that there was no room to install any more apps even though I had very few installed. Settings -> Storage would not calculate the space available so I figured that the partitions had become corrupted. I did the step by step format you described and reflashed & it all seems to be OK now.
I was trying to flash clockworkmod touch on my Samsung galaxy note 10.1 (GT-N8013) I accidentally put it in the bootloader section on Odin as opposed to PDA. now the tablet is stuck on the same image as the download mode, although I can access the actual download mode and the recovery. I have tried formatting system, data, cache and dalvik cache. What can I do to fix it?
Edit: I got it working after downloading the stock rom and flashing it first in the bootloader, which put it in a bootloop but got the stock bootloader loaded, then performing a full wipe and flashing it under pda fixed the bootloop.
Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
7mesa said:
Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
Click to expand...
Click to collapse
If still entering into download mode means there is no hard brick
This happens often and no need to worry
If you want to fix this just replace the boot.img in your custom rom by the boot.img of your stock rom than wipe everything and flash
Or if you have a backup of your stock rom system restore the boot from cwm
Hello,
Installed CWM to perform a migration out from the factory original Frodo level.
Took a backup with it. When reboot instead of booting again the std Frodo level it keeps booting into the CWM recovery.
Tried to clear the caches.
Tried to download an exitrecovery.zip file (renamed as update.zip, moved into the removable card first and later into the sdcard by using the CWM USB mount), executed successfully but didn't fix the problem.
Restored the backup level performed at the begining, but still boots into CWM.
Any hint or procedure to get rid of it? Even just restoring everything back to factory levels (I'm afraid to do this drastic step and still get the CWM recovery screen when other alternative action might be applicable).
Thanks!!
Here are the particulars.
rooted
Display JZO54K
Fingerprint = motorola/tervigon/wingray:4.1.2/JZO54K/.....
Loaded elementalx - xoom- v1.3 three months ago ran fine. Stupidly, I did not flash a backup. Now after deleting cache, factory reset, stuck in "loading apps" after splash, the boot loops back to motorola screen where I can launch CWM v4.0.0.4 - I want to get a ROM on there and continue using this mission-critical dinosaur. Can someone help?
I guess the real question is can a rom be copied onto the ext-sd card via windows out of the xoom? If so will CWM see it and will it work?
Have not tried connecting and using ADB. Not feeling confident enough at this point. ext SD still has data but when in CWM device does not show up in Windows.
TIA for any help
Geoff
sasquatchgeoff said:
Here are the particulars.
rooted
Display JZO54K
Fingerprint = motorola/tervigon/wingray:4.1.2/JZO54K/.....
Loaded elementalx - xoom- v1.3 three months ago ran fine. Stupidly, I did not flash a backup. Now after deleting cache, factory reset, stuck in "loading apps" after splash, the boot loops back to motorola screen where I can launch CWM v4.0.0.4 - I want to get a ROM on there and continue using this mission-critical dinosaur. Can someone help?
I guess the real question is can a rom be copied onto the ext-sd card via windows out of the xoom? If so will CWM see it and will it work?
Have not tried connecting and using ADB. Not feeling confident enough at this point. ext SD still has data but when in CWM device does not show up in Windows.
TIA for any help
Geoff
Click to expand...
Click to collapse
I pushed a stock rooted rom via ADB (I found the internal sdcard is accessible via the ADB shell) . The stock rom showed up in the CWM select zip file list. Installed the rom and the xoom animation freezes then continues the boot loop - regardless of rom installed. Cleaned system cache and davik cache as well after factory wipe. I am beginning to think hardware issues. No amount of cajoling will get this thing to boot into its OS. Either memory or processor - when it worked, I did have it running incredicontrol and 1.4 ghz and the max memory limitation upped to 64MB in order to run a lecture player for school.