Related
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Naweed Reza said:
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Click to expand...
Click to collapse
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
More doubts, really sorry
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
I am so sorry if I am bothering you or anything but I was going through the links, very handy and simple, and i came across this in the last link you have put about downlaoding a kernal .TFT
When reading through it says
Now you are ready to install a custom rom/kernel.
Let's start:
You go to development section and choose a rom you want for your device. You download the rom and the kernel for your device (make sure it is the right for yours! Sometimes the kernel is included in the installation zip file of the rom.
Now you have the boot.img and the rom
Click to expand...
Click to collapse
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Naweed Reza said:
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
Click to expand...
Click to collapse
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
PsychoFish81 said:
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
Click to expand...
Click to collapse
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Naweed Reza said:
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Click to expand...
Click to collapse
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Naweed Reza said:
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Click to expand...
Click to collapse
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
PsychoFish81 said:
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
Click to expand...
Click to collapse
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Naweed Reza said:
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Click to expand...
Click to collapse
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Step 1 is done
Okay, I have Restored the phone to factory using SUS
But check this link out and see if i can flash this CM instead
http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_mango
Unlocked bootloader
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
Okay, sorry it took long, but i just Unlocked my bootleader, after restarting my phone i get the welcome message and basically everything is like it was out of the box, is that supposed to happen?
Does unlocking the bootloader reset my phone?
Btw i used the CMD Method
Not rooting
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
HELP
I have flashed the kernal to a xperia arc kernal (TO downgrade for rooting)
I start up doomlords rooter thingy
And once i press anykey its on this
daemon not running. Start it now
daemon started successfully
And its just there
Ive used this program to root before and it worked
Btw after installing the neo kernal the phone doesnt restart, only on black scree, ive gotten that before but it had rooted successfully before
Please help me out :/
what are you doing?
if you want cm10, you don't need to root you phone, just simply flashing the rom will give you root
also flashing a kernel not meant for your device will obviosely create problems
instead try flashing this kernel
http://forum.xda-developers.com/showthread.php?t=2076764
and this rom
http://forum.xda-developers.com/showthread.php?t=1780326
Sorry for the inconvinience
Alright then, sorry for my stupidity, i realized the phone had to be connected in MSC
*Facepalm*
Rooting done, going to now flash it back
Wish me luck :fingers-crossed:
Thanks alot
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Naweed Reza said:
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Click to expand...
Click to collapse
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
cs098 said:
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
Click to expand...
Click to collapse
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Naweed Reza said:
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Click to expand...
Click to collapse
yep any cm10 kernel would work, however the fxp one does not have the best battery life or the best performance but it is the most stable
**********Hello Gionee E3 Users**********
Galaxy S4 Redefined ROM For E3 is RELEASED WITH LOT OF FEATURES
1) S4 UI
2) Air Gesture supported(with touchwiz launcher and gallery app only)
3) Fully Deodex
4) Reebooter
5) Fully working Wifi tethering.
6) Xperia Keyboard
7) More Free Ram
8) More Battery Efficient
9) Stable and Smooth
*****And Much More*****
Download link : Galaxy S4 Redefined http://d-h.st/Iu6
Galaxy S4 Redefined V2
Change log:
1.Base Rom Changed to Amarjeet Paul's Touchwiz Refined V2 for Xolo Q800(just for 3G on Sim 2)
2.3G on Both Sim
3.13 MP Camera
4.Galaxy S5 Fonts
5.Galaxy S5 Lockscreeen wallpaper
6.Viper4Android
7.Seeder
8.Rebooter
Download Link of Galaxy S4 Redefined V2 : http://d-h.st/bNh
Instructions for Installing Rom
1) Copy the zip file to the sdcard
2) Switch off your mobile
3) Go to recovery.
4) Take backup of ur ROM
5) Wipe data/factory reset
6) Clear cache,dalvik cache
7) Go to Mount and Storage format system
8) Then select the rom file from sdcard and select install
For Chinese Firmware0.Open Galaxy S4 Redefined V2.zip with the help of 7 zip
1.Replace boot.img from Stock ROM
2.Replace system/lib/hw/camera.default.so,hwcomposer.mt6589.so and sesors.default.so fro stock ROM
3.Replace system/lib/libcameracustom.so from stock ROM
4.Save zip file on your SD card
5.Reboot in to recover and follow the Steps of flashing described in Instructions for Installing ROM.
UPDATE: Download Update GS4RV2.zip file attached below screenshots.
Change log: More Smoother UI
Update : 2Change Logs.
* Now Message sent to Service Provider
* More power saving tweaks.
Download Update :http://d-h.st/gCs
**********ENJOY**********
Multi window
Fan_hTC said:
**********Hello Gionee E3 Users**********
---Now Your Wait Is Over---
Galaxy S4 ROM For E3 is RELEASED WITH LOT OF FEATURES
1) S4 UI Is Modded With Kitkat UI
2) Air Gesture supported(with touchwiz launcher and gallery app only)
3) Smart Scroll Supported
4) Smart Pause Supported
5) Fully Deodex
6) Reebooter
7) Fully working Wifi tethering.
8) Xperia Keyboard
*****And Much More*****
Instructions for Installing Rom
1) Copy the zip file to the sdcard
2) Switch off your mobile
3) Go to recovery.
4) Wipe data/factory reset
5) Clear cache,dalvik cache and system
5) Then select the rom file from sdcard and select install
6) Clear cache,dalvik cache
7) Reboot
Note: Download link is in screenshots.
**********ENJOY**********
Click to expand...
Click to collapse
Is multi window supported and working?
multi window.
vishal1801 said:
Is multi window supported and working?
Click to expand...
Click to collapse
yes its working.
thanks for ROM buddie
Sent from my Magnus using XDA Premium 4 mobile app
Gud one Bro...
Is 3g on both sim???
3g on both sim
Gauraav said:
Gud one Bro...
Is 3g on both sim???
Click to expand...
Click to collapse
my second sim card slot is damaged so i could not able to check it. pls check and post it for other's benefit.
Yeah thanks for the. Rom. I wanna Be sure since Indian Firmware is stated At Ur topic, are implying that I dont Have to restore boot logo for flashing this Rom?
Yes that's right u dont hv to restore boot.img for flashing this ROM, cause I hv used boot.img of Indian firmware.
Sent from my GT-I9500 using XDA Premium 4 mobile app
both sim working? and 3g for both or 1 sim?
can i install this rom on my phone
plz check phone specification
http://www.hamariweb.com/mobiles/qmobile-noir-a900_mobile-phone1841.aspx
Try flashing on qmobile.
m3hm00d said:
both sim working? and 3g for both or 1 sim?
can i install this rom on my phone
plz check phone specification
http://www.hamariweb.com/mobiles/qmobile-noir-a900_mobile-phone1841.aspx
Click to expand...
Click to collapse
As I hv posted earlier also, the second sim card slot of my mobile is damaged so I couldn't able to check whether 3g is working on both the sim or not. pls check it by urself and post it.
U can surely try flashing of the ROM on ur device. If u found any difficulty, u can contact me.
Take backup of ur ROM before flashing.
Fan_hTC said:
As I hv posted earlier also, the second sim card slot of my mobile is damaged so I couldn't able to check whether 3g is working on both the sim or not. pls check it by urself and post it.
U can surely try flashing of the ROM on ur device. If u found any difficulty, u can contact me.
Take backup of ur ROM before flashing.
Click to expand...
Click to collapse
brother i try but not work.....when reboot mobile stuck on ELIFE logo...
Fan_hTC said:
my second sim card slot is damaged so i could not able to check it. pls check and post it for other's benefit.
Click to expand...
Click to collapse
3g on sim 1 only and GPS not getting lock, Ram management is on little high side but no lags what so over. I am missing CRT off in this ROM and I think gravity box will not work on this(have not try it yet) and I have not tried viper4android as well.
---------- Post added at 09:57 PM ---------- Previous post was at 09:54 PM ----------
m3hm00d said:
brother i try but not work.....when reboot mobile stuck on ELIFE logo...
Click to expand...
Click to collapse
Just replace ur boot.img and it will work for u....
Gauraav said:
3g on sim 1 only and GPS not getting lock, Ram management is on little high side but no lags what so over. I am missing CRT off in this ROM and I think gravity box will not work on this(have not try it yet) and I have not tried viper4android as well.
---------- Post added at 09:57 PM ---------- Previous post was at 09:54 PM ----------
Just replace ur boot.img and it will work for u....
Click to expand...
Click to collapse
everything is working fine butt not giving signal
m3hm00d said:
everything is working fine butt not giving signal
Click to expand...
Click to collapse
For signal change ur modem.img from ur stock rom to this rom under firmware folder then I think it will solve ur problem....
Gauraav said:
For signal change ur modem.img from ur stock rom to this rom under firmware folder then I think it will solve ur problem....
Click to expand...
Click to collapse
itry it but not work plzzz any another solution
m3hm00d said:
itry it but not work plzzz any another solution
Click to expand...
Click to collapse
Flash the full rom once again with changes(full wipes). Lets hope it will work for u this time.
Gauraav said:
Flash the full rom once again with changes(full wipes). Lets hope it will work for u this time.
Click to expand...
Click to collapse
brother i full wipe......mobile showing invalid imei i have backup full of my stock rom....with mtk driod tools....and also have back up ok navram files....backup
plz help
m3hm00d said:
brother i full wipe......mobile showing invalid imei i have backup full of my stock rom....with mtk driod tools....and also have back up ok navram files....backup
plz help
Click to expand...
Click to collapse
Restore ur imei ans nvram from mtk driod tool
Gauraav said:
Restore ur imei ans nvram from mtk driod tool
Click to expand...
Click to collapse
i restore stock rom for recovery .... and working fine....plz dev. this rom make for my phone....this rom have only signal issue with me.....
if u need any file i can provide u.....
thanx in advance....................
Signals
m3hm00d said:
i restore stock rom for recovery .... and working fine....plz dev. this rom make for my phone....this rom have only signal issue with me.....
if u need any file i can provide u.....
thanx in advance....................
Click to expand...
Click to collapse
Try build.prop tweaks for signals. that might help u. Check ur stock build.prop and compare it with the ROM's.
On the occasion of my BIRTH DAY, I'm presenting u, my 2nd ported rom ANSP_v5 for Xolo Q3000.
It was already ported to our Xolo Q3K by Vipul Karkar(Hats off for Vipul). But, it has lots of unresolved bugs(as users have mentioned). So, I’m presenting my 2nd ported rom ANSP_v5 for Xolo Q3000. with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) Yavuz21 for the wonderful rom,
3) Dr. Avinash for Boot Logo.
4) Of course, me for Repartitioning Xolo Q3000. But, I need not to Thank myself, as I know, U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but ur work is all credited to you, so, please forgive me.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded anspv5-release-26042015.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install anspv5-release-26042015.zip
6) Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7) Immediately, Install the ANSP_v5_Patch.zip
8) Again, Wipe Cache & Dalvik Cache.
9) Reboot System.
10) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo).
WARNING: I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Custom Boot_Logo (Joker)
2) Latest Google Camera
3) ES Explorer as default File Manager
4) Latest Apollo music player
5) Lollipop messaging app
6) Official changelog at: http://forum.xda-developers.com/android/general/android-source-proeject-gm-discovery-t2931201
Bugs:
No major bugs, till now, few minor bugs are as follows:
1) Settings FC at Preferred Networks, APN & Network Operators
2) Report, if you found any.
Notes:
1) For weather settings, you have to set weather widget 1st.
2) For clock in notification bar, change color of clock in settings\ui settings\clock style
3) For Preferred Networks, use Engineer Mode.
Download Links:
1) ANSPv5 Full ROM
2) ANSP_v5_Patch
ALL THE BEST GUYS....
Screenshots:
https://drive.google.com/folderview?id=0B9c3NsdJ2PscUmRrZUkwZWhXZFE&usp=sharing
All the links are updated and working. All the best guys......
Great work
keep it up!!!
avi3230 said:
Great work
keep it up!!!
Click to expand...
Click to collapse
Thanks Bro, we r really missing you. Nice to c u again.
great......
dude....
simply superb....
How to add APN?
How to change DPI ???
Vinay Patani said:
How to add APN?
How to change DPI ???
Click to expand...
Click to collapse
I've already mentioned bugs, I'm trying to resolve bugs, u must wait & if u want to change dpi then use any third party app from play store.
Sent from HM NOTE 1W_MIUI6_5.7.23
sachin.r.fulzele said:
..... to change dpi then use any third party app from play store.....
Click to expand...
Click to collapse
don't know how it's with this rom, but on stock kitkat (rooted), i was able to edit build.prop file in /system.
added the line ro.sf.lcd_density=380 as the last line under ADDITIONAL_BUILD_PROPERTIES and rebooted to get my preferred resolution.
hi @sachin.r.fulzele, i'm an earlier user of xolo q3000. i happened to get back the device for a few days and i'd like to try out your rom.
please mention md5 checksums for your rom zip and patch zip. the rom zip has the following details:
Code:
anspv5-release-26042015.zip
Owner: muratyavuzakarsu
Size: 392 MB
is this the latest release as you intended? also, what exactly is the patch for? thanks in advance for your response.
@mohan, I am speaking frankly that I don't know, how to generate checksum & what is its purpose.
I've referred the link of original thread by @yavuz21, you can check it for latest version.
Patches are always provided, as you know, to suit our needs.
Sent from HM NOTE 1W_MIUI6_5.7.23
sachin.r.fulzele said:
.....how to generate checksum & what is its purpose.
Patches are always provided, as you know, to suit our needs....
Click to expand...
Click to collapse
if you're keen to know, http://bfy.tw/1HZr
nobody would know, unless you post about it.
upload pics
m0han said:
if you're keen to know, http://bfy.tw/1HZr
nobody would know, unless you post about it.
upload pics
Click to expand...
Click to collapse
What is it's use?
Sent from HM NOTE 1W_MIUI6_5.7.23
sachin.r.fulzele said:
What is it's use?
Click to expand...
Click to collapse
the patch? i wanna know too.
m0han said:
the patch? i wanna know too.
Click to expand...
Click to collapse
I've already told, what it is......
Sent from HM NOTE 1W_MIUI6_5.7.23
Hello
Where can we find themes for ANSP 5
Vinay Patani said:
Where can we find themes for ANSP 5
Click to expand...
Click to collapse
I've mentioned origional thread link, you can check it, if there is any progress.......
LENOVO A399 MTK6582 4.4.2
ROOT, CUSTOM RECOVERY, CUSTOM ROM (4.4.2 - 5.1)
& RESTORE STOCK ROM INSTRUCTIONS
I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING!
OK, so I managed to restore stock firmware and port a rom to this device. I thought I would share my experience as it may help others.
Ensure all drivers are installed before any flashing procedures.
Things needed; === NOT ALL IS NEEDED, TOOLS ARE FOR REFERENCE AND TASK DEPENDENT ===
GOOGLE - FOR INSTRUCTIONS ON HOW TO INSTALL DRIVERS OR USE THE BELOW TOOLS
TOOLS
WINRAR; WinRAR Official
SP Flash Tool [flashing original firmware/custom recovery; MEGA LINK
MTK DroidTool v2.5.3 [general tools, imei reader/fixer, partition block reader + more - NOT NEEDED UNLESS PORTING YOUR OWN ROM]; MEGA LINK
KingRoot; KingRoot Official
SYSTEM IMAGE UNPACK - NOT NEEDED UNLESS PORTING YOUR OWN ROM
[system image/rom porting]
Ext2explore v2.2.71; MEGA LINK
Ext4unpacker; MEGA LINK
ADB TERMINAL
Every android rooter should have this === AndroidMTK.com Official
DRIVERS
I recommend using PdaNet+ to install drivers, download, install follow instruction. It can be found here === PdaNet Official
OR SELF INSTALL DRIVERS
VCOM drivers; MEGA LINK
Micromax x86 and x64 drivers; MEGA LINK
FILES
Stock Firmware (SP Flash included); MEGA LINK
Custom recovery; MEGA LINK
Another custom recovery if above recovery does not find sd card (on resurrection remix for example); MEGA LINK
big thanks to BohArie for the alternate recovery
CUSTOM ROMS
Stock Modded; MEGA LINK
PussyFap v2.5; MEGA LINK
Ressurection Remix OS; MEGA LINK
ALL MEGA LINK HOSTED FILES (handy in one place for downloading if needed)ROOTING
simply install and run kingroot.apk and follow instructions.
CUSTOM RECOVERY
REQUIRED; SP Flash Tool, Original Firmware, Custom recovery [available above]
Unzip the original firmware.
Unzip custom recovery
replace custom recovery with recovery image in the original firmware folder.
Open SP Flash, select scatter file from original firmware folder and press download in application.
Now let's connect device and flash. . . . . . . . . .
Pull battery from phone, connect the usb, sp flash tool will recognise and flash the firmware, wait until complete and remove usb.
Restart phone. . . . .
. . . . . TAKES 10-15MINS. TO REBOOT . . . . .
Now stock firmware & custom recovery installed.
REPLACE STOCK FIRMWARE
!!USE THE ABOVE TO RESTORE STOCK FIRMWARE, JUST DO NOT REPLACE THE RECOVERY IN STOCK AND FLASH AS ABOVE!!
CUSTOM ROMS
STOCK MODDED + ROOTED CUSTOM ROM (MODDED ROM)
Flash in SP Flash Tool, replace recovery first with custom one then flash, This is a stock firmware with tweaks and root.
***** FAP V2.5 + ROOTED CUSTOM ROM (PORTED ROM)
This a rom I ported, works well, no major bugs. Good UI, responsive and 5.1.1 based
needs custom recovery to flash
Put file on external sd card, reboot to custom recovery, install from zip and select file.
wipe cache and dalvik restart phone
known bugs;
1-screen lock sometimes crashes after google services update - disable screen lock
2-none noticed
RESSURECTION REMIX OS - NOT TESTED -
I ported this and should work on this device
MEGA LINK
===FLASH ROM AND THEN GAPPS IN CUSTOM RECOVERY===
(remember to use alternate recovery from above)
ROM PORTING GUIDE
I used this guide here === YOUTUBE LINK
Most of the tools needed are in this post
Always use a rom to port as close to a stock rom as possible [cpu matches cpu . . . ram matches ram . . . etc).
If you want a different rom I can port it for you if you want too test it.
ANY PROBLEMS I AM HAPPY TO HELP.
CREDITS
MTKROMS.COM
NEEDROM.COM
***** FAP TEAM
MTK Hacker Pro VIA YouTube
BohArie via XDA
Tq bro.. ive been looking for this.. i already port many rom for a399 but its for my own use.. i kindda need this Lenovo A399 page in xda.. and i found it.. tq bro..
btw bro.. can u make twrp for lenovo A399
BohArie said:
Tq bro.. ive been looking for this.. i already port many rom for a399 but its for my own use.. i kindda need this Lenovo A399 page in xda.. and i found it.. tq bro..
btw bro.. can u make twrp for lenovo A399
Click to expand...
Click to collapse
I know thats why I made it...seems useless but invaluable if needed.
I have had trouble finding a twrp..there is some for mtk devices on the sites that i credit at the bottom of my op but none have been tested.
If you have any other tools or anything you need for this device let me know and i will update and provide links.
androrooter said:
I know thats why I made it...seems useless but invaluable if needed.
I have had trouble finding a twrp..there is some for mtk devices on the sites that i credit at the bottom of my op but none have been tested.
If you have any other tools or anything you need for this device let me know and i will update and provide links.
Click to expand...
Click to collapse
for twrp i have link and working for our Lenovo A399 but it is Russian not English.. if u know how to port it.. please consider to make it fully English bro..
for twrp for A399 please go to this link..
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=48230
btw your port wont work if we use ur custom recovery which is Clockwork recovery bro..
Right now, I try to swap storage between sdcard and internal storage also trying to increase ram by Script on init.d..
i need some help if u dont mind bro.. tq..
here.. i manage to swap it but as u see app still install in real internal and not sdcard..
for Ram.. I already swap it about 1.5gb for this devices..
BohArie said:
for twrp i have link and working for our Lenovo A399 but it is Russian not English.. if u know how to port it.. please consider to make it fully English bro..
for twrp for A399 please go to this link..
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=48230
btw your port wont work if we use ur custom recovery which is Clockwork recovery bro..
Right now, I try to swap storage between sdcard and internal storage also trying to increase ram by Script on init.d..
i need some help if u dont mind bro.. tq..
here.. i manage to swap it but as u see app still install in real internal and not sdcard..
for Ram.. I already swap it about 1.5gb for this devices..
Click to expand...
Click to collapse
I will have a go at the twrp translation..
Ive not tested ressurection remix but the recovery works with pussyfap...tried and tested and flashed via recovery..you need root at all times.
androrooter said:
I will have a go at the twrp translation..
Ive not tested ressurection remix but the recovery works with pussyfap...tried and tested and flashed via recovery..you need root at all times.
Click to expand...
Click to collapse
Cwm cant flash RR-Remix rom bro coz i already try with diffrent updater-script... But it working on twrp..
BohArie said:
Cwm cant flash RR-Remix rom bro coz i already try with diffrent updater-script... But it working on twrp..
Click to expand...
Click to collapse
Ok thanks. I'll get started on the translation today.
androrooter said:
Ok thanks. I'll get started on the translation today.
Click to expand...
Click to collapse
bro.. i manage to port TWRP 3 for our Lenovo A399..
here link: https://www.mediafire.com/?upfju97knkbx840
the only bug i found in this twrp is:
- reboot option only make device completely turn off (Remove battery to fix this)
BohArie said:
bro.. i manage to port TWRP 3 for our Lenovo A399..
here link: https://www.mediafire.com/?upfju97knkbx840
the only bug i found in this twrp is:
- reboot option only make device completely turn off (Remove battery to fix this)
Click to expand...
Click to collapse
Hey, good work. It seems it's not all that hard.
TWRP WORKING MEGA LINK
try this one, it works on mine with no bugs.
androrooter said:
Hey, good work. It seems it's not all that hard.
TWRP WORKING MEGA LINK
try this one, it works on mine with no bugs.
Click to expand...
Click to collapse
aha... great.. will test it and give you feedback tonight
and feedback is.. ur recovery cant access sdcard.. that what i found it on my device bro
did u make new one or use russian??
we have working twrp.. now we need kindda script to make storage swap.. can u help bro??
BohArie said:
aha... great.. will test it and give you feedback tonight
and feedback is.. ur recovery cant access sdcard.. that what i found it on my device bro
did u make new one or use russian??
we have working twrp.. now we need kindda script to make storage swap.. can u help bro??
Click to expand...
Click to collapse
Ill have a look. Its something to do with the devblk looking in wring place I think.
Didrussian one work with finding sdcard?
androrooter said:
Ill have a look. Its something to do with the devblk looking in wring place I think.
Didrussian one work with finding sdcard?
Click to expand...
Click to collapse
both russian and my port did find sdcard..
the only bug on my port is reboot option make device turn off completely
to fix your recovery.. try to edit some on your recovery.fstab ok ramdisk/res or etc folder bro..
BohArie said:
both russian and my port did find sdcard..
the only bug on my port is reboot option make device turn off completely
to fix your recovery.. try to edit some on your recovery.fstab ok ramdisk/res or etc folder bro..
Click to expand...
Click to collapse
I will sort it
androrooter said:
I will sort it
Click to expand...
Click to collapse
great.. if u dont mind.. please help me to fix twrp the one that i port.. after that.. we working together on swap internal and external on this lenovo A399
BohArie said:
great.. if u dont mind.. please help me to fix twrp the one that i port.. after that.. we working together on swap internal and external on this lenovo A399
Click to expand...
Click to collapse
Hey what rom are you currently using on the a399 with your working twrp (no reboot one)
androrooter said:
Hey what rom are you currently using on the a399 with your working twrp (no reboot one)
Click to expand...
Click to collapse
im using RR-Remix.. my own port..
androrooter said:
Hey what rom are you currently using on the a399 with your working twrp (no reboot one)
Click to expand...
Click to collapse
any news bro???
BohArie said:
any news bro???
Click to expand...
Click to collapse
Hey. I managed to get sdcard working on my twrp but the one you ported is much better as it has more support even with the no reboot problem. It may be best to leave your twrp as it is. It is fully working just with no reboot. Which is relatively minor.
Regarding sdcard not showing on rr ported rom that you using now.
Did you copy....
System/bin/vold
System/bin/sdcard
When you port. Did you copy them from stock to port?...
androrooter said:
Hey. I managed to get sdcard working on my twrp but the one you ported is much better as it has more support even with the no reboot problem. It may be best to leave your twrp as it is. It is fully working just with no reboot. Which is relatively minor.
Regarding sdcard not showing on rr ported rom that you using now.
Did you copy....
System/bin/vold
System/bin/sdcard
When you port. Did you copy them from stock to port?...
Click to expand...
Click to collapse
No bro.. The storage working well.. What i mean is swap storage.. Internal as sdcard on the other hand.. Sdcard as internal.. My port is working very well.. No bug.. The only thing that i want to do is.. Swap the storage.. Btw.. About twrp.. Which one do we use on this thread.. I think ur port much better then mine.. Bcoz i have bug..
BohArie said:
No bro.. The storage working well.. What i mean is swap storage.. Internal as sdcard on the other hand.. Sdcard as internal.. My port is working very well.. No bug.. The only thing that i want to do is.. Swap the storage.. Btw.. About twrp.. Which one do we use on this thread.. I think ur port much better then mine.. Bcoz i have bug..
Click to expand...
Click to collapse
So you want the internal storage to be parsed with external storage like in cyanogenmod roms where it uses external sd as system.. ..
My recovery wont work with ressurection remix i dont think but you can try I will upload later. I think i fixed where it looks for ext sd.
Hello friends , Are you waiting for a bugsfree, fast and most stable rom for our device.... then here it is.....
➡COMBO ROM⬅
It has following features :-
FULLY DEODEXED - NO BLOATWARES to make it light...
TWEAKED KERNEL - various tweaks are added to Kernel to make it SUPERFAST, enhance battery performance, and much more....
NO BUGS - like CM12.1 has touchscreen issues..
NoteRom has signal issues...
BASED ON STOCK ROM - original appears best
PRE BUILT ROOT : you just have to flash a zip file..
PRE BUILT XPOSED : Just install xposed apk. Binary is already present..
Download link for ROM : https://drive.google.com/file/d/0B97_mvaRURo-U29yS2F4RkxXa2s/view?usp=drivesdk
Download link for superSU: https://drive.google.com/file/d/0B97_mvaRURo-bnEwRkE5WHB5RE0/view?usp=drivesdk
Special thanks to @Amit.A
INSTALLATION :-
1. download the .zip file and extract .
2. Reboot to recovery and make a small backup ..
3. Replace the files in the recovery backup folder with the rom files..
4. Reboot to recovery and got to restore and flash ..
ENJOY ..
Screenshot please...
Screenshots..
Info
some more screenshots please! the rom looks awesome
i installed the rom today. looks mostly like the ultralite rom i used before.
hope there are no bugs as mentioned. thanks!
Sorry I posted here first without reading instruction and thank u for the rom
Thanks a ton for this lovely Original ROM
RG
INSTALLATION :-
1. download the .zip file and extract .
2. Reboot to recovery and make a small backup ..
3. Replace the files in the recovery backup folder with the rom files..
4. Reboot to recovery and got to restore and flash ..
ENJOY ..[/QUOTE]
Can we direct restore rom.No need to wipe first??
Hey bro. Can you make it for n7505 variant? Thanks
Lelonio said:
Hey bro. Can you make it for n7505 variant? Thanks
Click to expand...
Click to collapse
Sorry but I don't have n7505 variant...
But its easy, you can make it on your own ... Just follow these steps..
1. Download and flash note5 noble Rom.
2. Backup its boot img.
3. Download original lollipop Rom for your device and flash it through odin..
4. Flash twrp recovery again and then root it and remove/uninstall unwanted system apps...
5. Flash the backup boot img.
ENJOY
i want to install xposed... which type exposed can be install
mayoryusa said:
i want to install xposed... which type exposed can be install
Click to expand...
Click to collapse
Just install the xposed installer apk..
How is this ROM different/better from @Amit.A ROM
[ROM][5.1.1][NOTE5][SM-N750][N7505][Deodexed]?NoteRom
Also, I am currently running this above mentioned ROM but I am hardly getting 1 signal bar strength most of the time which is very frustrating. Have you fixed it in this ROM bro? Thumbs up for your good work, please reply ASAP so I can install your ROM.
Danniel.D said:
How is this ROM different/better from @Amit.A ROM
[ROM][5.1.1][NOTE5][SM-N750][N7505][Deodexed]?NoteRom
Also, I am currently running this above mentioned ROM but I am hardly getting 1 signal bar strength most of the time which is very frustrating. Have you fixed it in this ROM bro? Thumbs up for your good work, please reply ASAP so I can install your ROM.
Click to expand...
Click to collapse
Yupp ! I tried my best !
Hope it will fix your problem
ravichaudhary133 said:
Sorry but I don't have n7505 variant...
But its easy, you can make it on your own ... Just follow these steps..
1. Download and flash note5 noble Rom.
2. Backup its boot img.
3. Download original lollipop Rom for your device and flash it through odin..
4. Flash twrp recovery again and then root it and remove/uninstall unwanted system apps...
5. Flash the backup boot img.
ENJOY
Click to expand...
Click to collapse
Am I stupid or will this end in a stock ROM (although rooted) with only the boot.img different if I don't remove any "system apps" ?
So is this "ROM" single difference with stock is we can remove what we want ? Can we do it also once we've restored the Note/Noble boot.img ? This would be great, along with the fact to stick close to stock gives more chances to be bugs free isn't it ?
Please tell me (I'm newb and non-english easy), what does "combo"ROM stand for ?
Thanks
1stStep said:
Am I stupid or will this end in a stock ROM (although rooted) with only the boot.img different if I don't remove any "system apps" ?
So is this "ROM" single difference with stock is we can remove what we want ? Can we do it also once we've restored the Note/Noble boot.img ? This would be great, along with the fact to stick close to stock gives more chances to be bugs free isn't it ?
Please tell me (I'm newb and non-english easy), what does "combo"ROM stand for ?
Thanks
Click to expand...
Click to collapse
Yes you are right in that this ROM is different from stock in boot.img. But this ROM is different from stock in having no bloatwares and few other patches..
"COMBO" here means this ROM is combination of Noble and Stock ROM
How is it possible that said "patches" would survive to stock reflash. These aren't in boot.img (this is the way you say to install : just install to backup boot.img then erase all with stock and restore boot.img backup). Wouldn't it be simpler to just distribute the tweaked boot.img then only flash this one ?
More, above, about 7505 you say "it's easy" to make it. But where is Noble for 7505 ? It is no more available. In fact this is my main problem to give try to your pragmatic way
Query for rooting Samsung note 3 neo ...
Can you please elaborate step 2 ... I have reboot to recovery. What do you mean by make small backup? Where and How to make it ?