Hello, I have the H60-L12 model with NFC, running stock B313 firmware. I already enabled NFC communication in the settings and I can see the NFC logo in the status bar.
However, when I try "NFC Tools" to read an NFC tag, or "Banking Card Reader" to read my credit cards' NFC chips, nothing happens.
What might be wrong?
Best regards,
CherryDT
Related
I just bought a spare battery on ebay, and I'm doubtful it has NFC. But, when I went under settings/wireless and networks, I was able to enable it through the checkbox. I have no tags to test it out on. Is there a way on the phone to test it out (like the device manager on PCs)?
no, u need another nfc phone or a tag
Hey, in australia we can get "Smart Riders" which are basically just credit card sized cards that we can use to tag on/off of public transport, as i prefer often don't take my wallet with me i was wondering if there is a way to save the NFC signal from the card onto my Nexus 5 (which has NFC) and then later on use my phone to tag on/off instead of the card
tl;dr is there a android app that can record and then output the same NFC signal
jezus101 said:
Hey, in australia we can get "Smart Riders" which are basically just credit card sized cards that we can use to tag on/off of public transport, as i prefer often don't take my wallet with me i was wondering if there is a way to save the NFC signal from the card onto my Nexus 5 (which has NFC) and then later on use my phone to tag on/off instead of the card
tl;dr is there a android app that can record and then output the same NFC signal
Click to expand...
Click to collapse
Not sure...but it sounds similar to what is described in this thread: http://forum.xda-developers.com/showthread.php?t=2708480 only for the subway in Chicago...
Here's my problem: I want to be able to primitively emulate some function of a Desfire EV1 card by playing back the APDUs it receives/sends to a card reader. The problem is I don't know what kind of APDUs the reader is sending out.
I can't use KitKat because KK HCE requires the app to specify the SELECT AID APDU that the reader sends out, and I have no idea what that is or whether the reader is even sending a SELECT AID out.
I figured I could use Eddie Lee's NFCProxy on a modified build of CM9 to analyze the card/reader interactions, but every time I put my phone up to the reader, it says "invalid card."
My guess is that the reader is picking up some other NFC signal from the phone, possibly Android Beam-related. In fact, if I try to run a card emulation app on 1 phone and have another phone try to read it, both of the phones start buzzing. Even though I have Android Beam turned off, the OS's NFC scanning cycle is set to detect other Android peer-to-peer devices regardless.
Modifying the app's manifest for android.nfc.disable_beam_default doesn't disable it either.
Does anybody know what I have to modify in the CM source code to disable peer-to-peer NFC completely? Then I could build a version of CM with proper emulation. OR, does anybody have any other ideas?
I've been tearing my hair out with this one lol
I use to be able to check in at any Hardee's location with my Honor X2 but app can't find my location anymore when using phones data... When I'm on wifi it will find my nearest location but I'm too far to check in... I can use "Fake GPS app" to check in though but would prefer the correct way to check in... My GPS is turned on and set to high accuracy... I'm on Kangvip b211... App hasn't worked properly since 5.1.1
I read that one of the advantages of the original B201 update for the 702 model is a local adjustment for gps to the area where 702 mainly is sold.
If you have a 702 and swap to the b201, this could solve the problem.
I also noticed a error on only gps mode. It's about 20-40 m away from the point where our should be. Turning on usage of wlan and gsm for localization corrects this on my 701.
I don't know if this is a software bug, or a hardware issue.
My device: 701->703 Kang VIP B209
Hi, i have samsung note 5 with tripped knox
i know samsung pay,health will not work anymore
But how about nfc on 3rd bank app?
I try to read e-money card but it just kind off loading and nothing result at the end.
It still recocnize the card tough. But just kind of trying reading and nothing happen. And sometimes it triggering Symbol at the wifi icon bar when i read the card. And then “no internet connection”
Even tough when i close the bank app. The Symbol at wifi dissapear and internet work again.
I dont know wether its app bug or knox related things?