Lean stock ROM with a "few tweaks" and nothing more...
Chef: bertans
Version: 12.06.1 (YY.MM.REVISION)
Release date: 2012.06.12
Description: DISCONTINUED PROJECT
Description: Android Froyo 2.2.1 based on stock-firmware V100R001C18B842
Note: 164mb free memory (cache cleaning apps may erase the dalvik-cache, a simple reboot will restore it)
If you really like this ROM press the "THANKS" button on this post!
Change-log:
updated Gapps (Gmail, Maps, Vending)
CUST partition no longer used/required
updated root binary
added notepad
Previous changes:
changed default gallery
removed Huawei folders in init.rc
rebuild ROM from scratch with original UPDATE.APP
Android 2.2.1 (FRG83)
updated APN list
removed unnecessary Gapps (download from Android Market)
unlocked automatic CPU idle stock-setting @122mhz
stock-enabled multi-touch on synaptics touchscreen
enabled multi-touch apps download
changed default network mode to GSM (new installation only)
format /cache directory during install
improved SD card speed (cache size 1024 Kb)
applied malware exploit patch
enabled regulatory domain
moved /data/dalvik-cache to /cache/dalvik-cache
Italy short operator names (3 ITA, TIM, vodafone IT, WIND)
Edify installation script
changed default sounds
optimized Dalvik-cache
changed default language
increased wi-fi scan interval
removed live wallpapers functionality
deodexed
zipaligned
rooted
enabled autofocus apps download (es. Goggles)
added notification sound "Messaggino" and "Pop"
added ringtone "Telegraph"
Added software:
FMRadio.apk
LauncherPro.apk
Note.apk
QuickPic.apk
Superuser.apk
(all credits to developers)
Removed software:
Email.apk
Gallery.apk
GenieWidget.apk
Launcher2.apk
LiveWallpapers.apk
LiveWallpapersPickers.apk
Stk.apk
(place .apk file in /system/app and reboot the device)
Download:
http://www.mediafire.com/?nbl8pwnv2zwfb6b
(size: 65.374.452 bytes, MD5: 1199a3a08a9927f0970ab4f9c84ce062)
Install procedure:
install this suggested recovery (ClockworkMod 6.0.1.2 r1) by powering-on into bootloader mode (RED button + VOLUME DOWN button + POWER button) with this Universal Naked Driver (if requested by O.S.);
power-on into recovery and run the following wipe: "wipe data/factory reset";
select "Choose zip from sdcard" (in "Flash Zip from sdcard" menu) to install the cooked ROM and the eventual update.
Update procedure:
To update from a previous build, after a backup (for security reasons), don't run any wipe!
Clean the CUST directory before update LEANdroid (new builds don't use it anymore). Power-on into recovery and select "format /datadata" (in "mounts and storage" menu).
Then select "Choose zip from sdcard" (in "Flash Zip from sdcard" menu) to update the cooked ROM.
Hints for developers:
If you want to cook your own ROM, take a look at this page...
Credits:
dsixda (kitchen developer), FUSIONdev (frequency and kernel guru), udK (recovery developer), ep690d (original ROM hunter), 1wayjonny (Universal Naked Driver) and many many many others!
baseband ROM
Just checked that the baseband ROM "U8150 V100R001C253B836(Germany retail 2020).zip" is a Germany version. Will that work in the US and other Asian countries?
The change log looks great. Would want to give it a try. Thank you!
greenleaves said:
Just checked that the baseband ROM "U8150 V100R001C253B836(Germany retail 2020).zip" is a Germany version. Will that work in the US and other Asian countries?
Click to expand...
Click to collapse
I think so... but if it doesn't, you always can restore your backup!
Version V08 released!
Ottima!!
Sembra avere meno "impuntamenti" quando si scrive sms con HTC ime..
Tabatj said:
Ottima!!
Sembra avere meno "impuntamenti" quando si scrive sms con HTC ime..
Click to expand...
Click to collapse
This is an english-based forum... if you are looking for italian support, take a look at this page!
V08.1 released!
v. 08.1 : Installation aborted, I had to reinstall v. 07.2
bye
Installation aborted, impossible to install, ( recovery Clockworld or Ultrajack),
tried to install from djdroid 0.6, from original 838 and from 0.8, but
even with the same.
screen11
Sorry guys... I forgotten to manually modify the updater-script after the passage through the kitchen.
I'm uploading the entire ROM (the new download link will follow as soon as possible)!
Download link in first post updated... I'm so sorry, I'm aware my error caused a significant time loss for you!
Good night and good luck
OK Bertans...;-)
It's ok, now, thanks a lot for your great rom.
screen11
I'm happy... and excuse me again (it won't happen again).
If you really like this ROM, can you press the "THANKS" button on the first post? In this way I can understand (more or less) how many users it have!
I like this rom.
Very good work.
Can I try install the Stock ROM whit serial number B838? and after install your costum ROM or i find a problem? (sorry for my bad english)
Vix87 said:
Can I try install the Stock ROM whit serial number B838? and after install your costum ROM or i find a problem?
Click to expand...
Click to collapse
You shouldn't encounter any kind of problem installing a stock ROM... because everything is erased!
What I can tell you is that I wasn't able to install B838 on my IDEOS. Maybe they added a version/hardware control... but I don't know exactly where the problem was!
New screen-shots available...
Note: first boot launcher appearance is different from the attached image (you can modify it in launcher's preferences).
Changed ROM name in LEANdroid...
hi
for any devs who are interested in increasing the amount of available rom software for ideos, click this link and comment "join" with your opinions about my project.
http://forum.xda-developers.com/showthread.php?p=12201243#post12201243
any questions just ask.
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROM And Recovery for the Wiko DarkMoon
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
Instructions and Frequently asked questions (FAQ):
For Instructions jump into post #2.
FAQ jump into post #3.
Wiko DarkMoon internal memory re-partition, jump into post #4.
How to Revert to the STOCK Rom / Recovery / Partition Layout, jump into post #4.
Recovery INFO
The salient features of Carliv Touch Recovery include:
Based on CWM 6.0.4.4
Full Touch Support
With features of Cannibal Open Touch
Aroma File Manager Support
Support for both Edify and Amend scripting allows flashing all ROMs
Touch screen button controls
Advanced Backup
Advanced Restore
Delete old backups
Persistent settings
User-defined backup locations
ADB Sideload
Update CTR v2.5 (30/07/2014)
Changelogs:
New Menu Layout
Tar + Gzip Backup Compression : ( "Backup/Restore" -> "Default Backup Format" )
Your Backups will be smaller now, just like on the old native CWM
Removed "wipe all" option from wipe menu ( if you need to wipe system, use "format system" from "mounts/storage")
Rearanged menu order in root menu to restore CWM order
There's now an "nvram backup/restore" menu in "carliv" section
The nvram partition will be backed up in clockworkmod/backup folder as nvram.img. This will help if you lose IMEI and other communication features. It will work only if you have the nvram partition of size 0x500000 (check your scatter) and if you have the nvram defined as /dev/nvram path in recovery.fstab. If the nvram partition is damaged (as in flashing an oversized recovery) this will not help you, and you need SPFlashTools to reflash with format your phone official firmware, and after that flash this recovery, boot in recovery and restore nvram.
some other small changes.
Changelogs
Android 4.2.2 (JB) Based custom ROM:
Changelog Build v1.0 (February 22 2014)
Based on official Android 4.2.2 ROM (WIKO DARKMOON Version 8)
Kernel 3.4.5
Custom Mods:
User customize-able installation based on AROMA installer
Pre-rooted with SuperSU (v1.93)
Debloated
Added BusyBox (v1.22.1 - Stericson)
Added Ad blocker (patched "host" file)
Ziplagned apks (better performance)
init.d support with performance scripts
Network, wifi, power saving, and several other tweeks
Updated APN's from CyanogenMOD repo
Added Performance Control (several CPU/System Mods)
Added in-built Xposed framework and Latest Gravity BOX module v2.9.7 (Several System Mods)
Acess To the Mediatek MTK Eng Mode
Added the following Android 4.4 KitKat Goodies:
Apps (Including Google Launcher - GEL, with Voice Search )
Bootanimation
QuickOffice
And other necessary system files
Kernel:
Insecure
Removed Mediatek debugger (mtk.aee.aed Daemon; etc)
USB Mass Storage as Default (instead of MTP)
GPL Compliance:Kernel 3.4.5
Github Kernel Repo
Downloads:Dev-Host
WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip - 386.12 MB
Mod_extended_USRDATA_2.5GB.zip - 7.07 MB
MT65xx_USB_VCOM_drivers.zip - 403.65 KB
Wiko_Recovery_and_FlashTool.zip - 12.54 MB
Credits:
SuperDragonPT
Wiko
Carliv (Awesome CWM based Recovery)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
bgcngm(For Maintaining the Gbox JB Branch)
h0rn3t and educk (for Performance Control), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] , ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_Wiko_DarkMoon_Custom
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-22
Created 2014-02-22
Last Updated 2015-02-14
How to flash custom recovery:
Make Sure your Phone is fully Charged
Make an Full Backup of your files (Photos/Contacts, etc)
Download The MT65xx_USB_VCOM_drivers.zip
Install The Mediatek VCOM Drivers (For Detailed Drivers instalation Instructions, please check this thread)
Download The Wiko Recovery and FlashTool
Extract the .zip and you'll see two folders "Recovery" and "SP_Flash_Tool"
Open "SP_Flash_Tool" > Flash_tool.exe > Scatter-Loading> And select the "MT6582_Android_scatter.txt" from the "Recovery" Folder
Turn OFF your Phone
Press "Download" (don't worry with the pop-up "Download-Warning" Message), press YES
Connect Your Phone to PC (Turned OFF) , The Flash Progress should beginn, when its succesfully Finished A Green Ring will shown.
Congrats The Recovery is installed
How to enter into recovery mode:
With the Phone completely turned off...
Press and hold VOL. UP + VOL DOWN + POWER keys and turn on the phone.
Keep holding the keys, wait until you see on Phone:
Code:
"Recovery Mode: Volume UP"
"Factory Mode: Volume Down"
Then Press on VOL. UP key, and Recovery will load.
Navigation under recovery mode:
As soon as the splash logo disappears, Carliv Touch Recovery menu will appear. Navigation is Full Touch.
You can also use VOLUME keys (navigate up with VOL. UP and navigate down with VOL. DOWN) and POWER key to apply the action.
Scroll Pages under Recovery: To Scroll page down you have to swipe right, and for scroll page up to swipe left. Also swipe left for Go Back.
Aroma File Manager:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Flashing The ROM:
Copy The ROM to The External SDCard
On Recovery:
Wipe Menu> Wipe All Data - PreFlash (Select YES - Wipe All)
Wipe Dalvik Cache (Select YES - Wipe Dalvik Cache)
Install zip > Choose zip SDCard (Select the location of the ROM.zip)
And Follow The On-Screen AROMA Installer Instructions
In the End the Phone will Reboot Itself
The first Boot will take some minutes (it's normal)
F.A.Q
Q: How Can i acess The MTK Eng Mode?
A: GravityBox >Engineering Mode
Q: What Mods can i do on the Eng.Mode?
A: There are alot of things you can do, the two most common are:
Increasing volume Level:
MTK Menu> Hardware Testing> Audio> On the "headset mode" and "LoundSpeaker Mode" set max values to 145 (The max is 160, but i dont advise it, stay safe and use the 145 value)
Speed up the GPS reception :
(Before Going to the MTK Menu)
Open the app "FasterGPS", and give it root permissions
Choose your Continent, your region (at this point, your gps is properly configured with your country *.ntp values)
(Now on MTK Menu ...)
MTK Menu> Location> Location Based Service> On the "AGPS" tab, tick the "Enable A-GPS", and on the "EPO" tab, tick "Enable EPO" and "Auto Download" , this last option will download the EPO files it requires an data connection.
Start the app "GPS Status", in the first Satts Lock, you need to wait a little bit (it can take up to 15m, be sure you are in an Open Area).
When you get an good lock, on Satts, your DONE.
A: I dont see the Development Options, how can i acess it?
Q: Unlocking the Development Options:
Go to "Settings" > "About Phone"
Then tap 7 times on the "Build Number"
Q: Where are the Development Options?
A: Settings> Developer Options
Q: What is the Performance Control?
A: Its an Control Panel, where you can Change / managed the CPU Governors/ IO Shedulers / among several other things.
Q: The Launcher sometimes seems an bit laggy
A: Go to Settings> Developer Options> on "Window animation scale" set it to .5x, and on "Transition animation scale" set it to .5x
Q: I really like your work, how can i thank you?
A: You can press the "THANKS" button, and if you want, you can donate some beers to me
Wiko DarkMoon internal memory re-partition
Mod Extended Userdata v1 ( 2GB ) --> Removed / Use the v2
This Mod will extend userdata partition to 2GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Mod Extended Userdata v2 (2.5 GB)
This Mod will extend userdata partition to 2.5GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA_2.5GB.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2.5GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Reverting to the Stock ROM
This will revert back your phone to STOCK (including the stock recovery), in case you need to send your phone to the Service Center
Instructions:
Go to Wiko's website and download the latest Rom Version:
http://fr.wikomobile.com/maj.php?telephone=131
Follow the instructions given ...
Older instructions:
Download the DARKMOON_JB4.2.2._Stock Rom-wiko_rev8.zip
Use the SPFlashTool that i provided with the CWM Recovery .zip
Make sure phone is fully charged
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt
Press Download
After flashing is complete,you'll see an green circle
Profit
Thanks. Can you add some screenshots?
h3lder said:
Thanks. Can you add some screenshots?
Click to expand...
Click to collapse
Was Uploading, check under the ScreenShots TAB
Regards
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
sapoide said:
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
Click to expand...
Click to collapse
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
superdragonpt said:
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
Click to expand...
Click to collapse
Ok understood, thanks
Do this rom will work with my Xolo Q700S?
Sent from my Q700S using xda app-developers app
superdragonpt:
Where can you please downloaded the source code for kernel mt6582? Can you give me a link please?
Or: Your sources kernel what you gave to download are original (unchanged)?
Edit:
OK. I found where you can download the source. Sorry for the spam.
http://forum.xda-developers.com/showthread.php?t=2645756
http://forum.xda-developers.com/showthread.php?t=2650513
Hi
You guys are all crazy with the MTK leaked sources, but do you even have an clue what those sources are?
You cant just compile an source that's customize for other phone , thinking it will work on yours.
There's a lot of work to be done, and you need an huge amount of luck to have your phone drivers available in that source.
This said, I will appreciate that people avoid off-topic and other phones talk in this thread.
This ROM and recovery will only work on wiko darkmoon and Micromax a200 (clone).
If your using this ROM as a base for another MT6582 phone, please be an gentlemen and give proper credits.
Regards
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
superdragonpt said:
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
Click to expand...
Click to collapse
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
skydancer79 said:
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
Click to expand...
Click to collapse
The ROM is multi language.
What language where you looking for?
Regards
superdragonpt said:
The ROM is multi language.
What language where you looking for?
Regards
Click to expand...
Click to collapse
Slovenian...most android phones have it. Moto G had the same "problem"
skydancer79 said:
Slovenian...most android phones have it. Moto G had the same "problem"
Click to expand...
Click to collapse
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
superdragonpt said:
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
Click to expand...
Click to collapse
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
skydancer79 said:
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
Click to expand...
Click to collapse
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
superdragonpt said:
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
Click to expand...
Click to collapse
So is this ROM fully functional? I mean no bugs? For English language.. I could test it on my Turbo mini
Orignal Thread :- http://4pda.ru/forum/index.php?showtopic=577004&st=960#entry33634873
SYSTEM PARTITION NEEDED
-Latest Android 4.4.2
-Latest Android 4.4.2 Lenovo Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-S5 Status Bar
-3G SIM Switch
-Sim Toolkit
-Quick Setting
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-KK LockScreen
-KK Dialer
-KK Contacts
-KK Messages
And Many More.........
Bugs :
Memory Reversed
Tell if you see any More....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** Process To flash Patch **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
Screen Shots
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : DinasNet from 4pda, Besik_13 xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
sorry for my bad english.
Happy Diwali and this is your Diwali Bonus
Downloads
Mirror1
Mirror2
For root Problem Flash this
boot_updateV3(PERFORMANCE, BATTERY)
Tip :- Register free account on UsersFiles then activate then login with your ID and Pass then download. There is no download limit
Pay attention to the BusyBox ... Viper4Android swears on Box ...
did anyone try this rom can u all give back some reviewsor bugs or whatever this rom have and is this real kitkat
It's kitkat only but battery draining soon and it's looking like themed, can't go to recovery Mode using mobile uncle tools always have to switch off n have to go by pressing buttons.so I'm back to CM11.
sorry but
honestly the worst rom ever
Orignal Thread :- http://4pda.ru/forum/index.php?showtopic=577004&st=520#entry32157619
SYSTEM PARTITION NEEDED
-Latest Android 4.4.2
-Latest Android 4.4.2 Lenovo Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-New Status Bar
-3G SIM Switch
-Sim Toolkit
-Quick Setting
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-KK LockScreen
-KK Dialer
-KK Contacts
-KK Messages
And Many More.........
Bugs :
Tell if you see any More....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** Process To flash Patch **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
Screen Shots
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : DinasNet from 4pda, Besik_13 xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
sorry for my bad english.
Happy Diwali and this is your Diwali Bonus
Downloads
Mirror1
Mirror2
For root Problem Flash this
boot_updateV3(PERFORMANCE, BATTERY)
Tip :- Register free account on UsersFiles then activate then login with your ID and Pass then download. There is no download limit
Russian language support?
BOPOH'Ok said:
Russian language support?
Click to expand...
Click to collapse
Yes, of course. This is a mod @DinasNet.
.....but I don't like.
Regards.
Hyperion.
Great job.
Bugs: doesn't work OTG, built-in weather, external and internal memory are reversed.
Any resolution or update to the mentioned bugs?
BOPOH'Ok said:
Great job.
Bugs: doesn't work OTG, built-in weather, external and internal memory are reversed.
Click to expand...
Click to collapse
If you haven't noticed a bug with OTG, it is a new bug.
At least at the time of writing of the previous message.
Introduction:
Hello
My work colleague got a ZTE Nubia Z5S Mini NX403A on AliExpress a few days ago. The phone came with a lot of preinstalled Chinese apps he didn't need and the Google Apps were not available so we decided to make a clean stock ROM of the device. It's my very very first ROM and althought I read a lot of documentation on this place I still have to read more to learn. The phone is not mine and I don't know if I will update it at all.
The official ROMs of the device can be found at http://www.nubia.cn/service.php?sid=5.
This ROM is based on the Android 4.4.2 - 1.25 stock version.
These are the changes so far:
Recovery eliminated so it won't be overwritten when installing the ROM
Removed Baidu apps
Removed Baidu Input and set AOSP as Default
Removed Chinese apps
Removed Nubia Wizard (if Gapps are installed, Google Wizard will show up)
Added Android AOSP sounds along the Nubia ones
Edited build.prop file so the phone's default language will be English
I am not sure if I will keep working on it since the phone is not mine, but I hope I can make the following changes:
Replace bootup.wav sound with a nicer one
Replace boot animation
Make own gapps that match with the Nubia layout (at least the PlayStore)
Add a occidental APN list and remove the APN chinese list
Edit the list of search providers inside the browser
Edit desktop layout. At the moment, when the phone is started for the first time, the apps are not sorted
Known issues:
Installed apps from the Google Play Store will get duplicated on the desktop
Go to Play Store settings and disable "add icons to desktop" optionIf you already have several duplicated ones. Just go to "Apps" in the Settings menu. Find Launcher3 and delete the app settings
ROM Link:
http://www.mediafire.com/download/a2uvlzzuelvk12q/MOD-NX403A_4.4_update_H125.zip Only for NX403A
Gapps:
I guess you can use any Gapps compatible with Android 4.4.2. Google Apps Minimal Edition will work well
Stock Recovery:
Stock Recovery 4.4 to 4.2 (Use this for 4.2 stock ROMs)
Stock Recovery 4.2 to 4.4 (Use this for 4.4 stock ROMs)
Root:
SuperSU 2.46
Instructions:
Once a recovery installed, flash the ZIP
Flash Gapps
Flash Root (optional)
Wipe Data, Cache, Dalvik (Shouldn't be needed in most cases)
Notes:
Since the ROM wasn't heavily modified it might be possible to flash it with the stock recovery. I used TWRP version 2.6.3.0
Rom for zte
I need full rom for zte z5s mini NX404H, help me
Please.
Note as a reminder:
Download the 3 files:
MOD-NX403A_4.4_update_H125.zip -> ROM
NX403A_4.4_to_4.2_recovery_V1.zip -> recovery 1
NX403A_4.2_to_4.4_recovery_V1.zip -> recovery 2
I tested them, with the device: zte nubia z5s mini nx406e
and they didn't work, not even the recovery.img by themselves.
even this one didn't work: Recovery 2.6.3.0
taken from> here
tested with version: Android Debug Bridge (adb) 1.0.32 ( should I try another version ? )
albertocastillo2001 said:
Introduction:
Hello
My work colleague got a ZTE Nubia Z5S Mini NX403A on AliExpress a few days ago. The phone came with a lot of preinstalled Chinese apps he didn't need and the Google Apps were not available so we decided to make a clean stock ROM of the device. It's my very very first ROM and althought I read a lot of documentation on this place I still have to read more to learn. The phone is not mine and I don't know if I will update it at all.
The official ROMs of the device can be found at http://www.nubia.cn/service.php?sid=5.
This ROM is based on the Android 4.4.2 - 1.25 stock version.
These are the changes so far:
Recovery eliminated so it won't be overwritten when installing the ROM
Removed Baidu apps
Removed Baidu Input and set AOSP as Default
Removed Chinese apps
Removed Nubia Wizard (if Gapps are installed, Google Wizard will show up)
Added Android AOSP sounds along the Nubia ones
Edited build.prop file so the phone's default language will be English
I am not sure if I will keep working on it since the phone is not mine, but I hope I can make the following changes:
Replace bootup.wav sound with a nicer one
Replace boot animation
Make own gapps that match with the Nubia layout (at least the PlayStore)
Add a occidental APN list and remove the APN chinese list
Edit the list of search providers inside the browser
Edit desktop layout. At the moment, when the phone is started for the first time, the apps are not sorted
Known issues:
Installed apps from the Google Play Store will get duplicated on the desktop
Go to Play Store settings and disable "add icons to desktop" optionIf you already have several duplicated ones. Just go to "Apps" in the Settings menu. Find Launcher3 and delete the app settings
ROM Link:
http://www.mediafire.com/download/a2uvlzzuelvk12q/MOD-NX403A_4.4_update_H125.zip Only for NX403A
Gapps:
I guess you can use any Gapps compatible with Android 4.4.2. Google Apps Minimal Edition will work well
Stock Recovery:
Stock Recovery 4.4 to 4.2 (Use this for 4.2 stock ROMs)
Stock Recovery 4.2 to 4.4 (Use this for 4.4 stock ROMs)
Root:
SuperSU 2.46
Instructions:
Once a recovery installed, flash the ZIP
Flash Gapps
Flash Root (optional)
Wipe Data, Cache, Dalvik (Shouldn't be needed in most cases)
Notes:
Since the ROM wasn't heavily modified it might be possible to flash it with the stock recovery. I used TWRP version 2.6.3.0
Click to expand...
Click to collapse
What Android Debug Bridge (adb) version did you work with ?
I tested it with Android Debug Bridge (adb) version 1.0.32