I'm using 12 cm beta 6 and thunderzap kernel,, when the phone is charging off press the power button, I am not able to turn it on, I can only turn it on when I disconnect the outlet and press the button again.
It could be a bug in the ROM (it is a beta) or it could be your charger. Try other chargers and see if the problem persists.
Is a small bug
sinisterzero said:
It could be a bug in the ROM (it is a beta) or it could be your charger. Try other chargers and see if the problem persists.
Click to expand...
Click to collapse
is not the charger is a small bug (just discover) that is present in all kitkat custom roms and lollipop.
please see this video !!!
sorry my bad english !!!
Related
Can anybody help me to work my HP 614c again. This phone is gift to me. But it is not working I try to reflash it with micro SD card nothing happens. Only indicate light when it is flashing an when the battery is not into phone there was flashes on orange and green orange green against. When it is charging with battery only orange light . Have any way for reviving my HP? And master reset is not working.
taka87 said:
Can anybody help me to work my HP 614c again. This phone is gift to me. But it is not working I try to reflash it with micro SD card nothing happens. Only indicate light when it is flashing an when the battery is not into phone there was flashes on orange and green orange green against. When it is charging with battery only orange light . Have any way for reviving my HP? And master reset is not working.
Click to expand...
Click to collapse
here is link for firmware WM 6.1/6.5
http://all-cooked.blogspot.com/
let me know your phone was recently unlocked? this is "dead phone after unlock"- known problem after unlock a phone also could be hardware faulty
also check battery voltage also a problem with ipaq series is that not to many tools leaked from HP
most important check battery voltage blinking indicates low battery phone can not start also use a battery from another ipaq by example 6515 they are compatible
I know this phone it's nice
by the way what did you do to reflash there are instructions check link above
ruscan.calin said:
here is link for firmware WM 6.1/6.5
http://all-cooked.blogspot.com/
let me know your phone was recently unlocked? this is "dead phone after unlock"- known problem after unlock a phone also could be hardware faulty
also check battery voltage also a problem with ipaq series is that not to many tools leaked from HP
most important check battery voltage blinking indicates low battery phone can not start also use a battery from another ipaq by example 6515 they are compatible
I know this phone it's nice
by the way what did you do to reflash there are instructions check link above
Click to expand...
Click to collapse
Only Sorry for my bed English...
I charge the battery into the another battery charger. When I put the battery and try to turn on phone only lights but nothing ltter watch on the screen. When I try to reflash with new rom into SD card after that I push mute+OK(left size on the phone)+ power on buton only lights but nothing watch on display. After that I try to make master reset the result is same only display light nothing writing into display . When display is light I hold power on button after 20 seconds any song hear same as when I try turn on on dhe display watches anything as "Are ou sure want to power of phone ... YES/NO" . Do you thing the problem is softaware or hardware ? I don't know whats happen with this phone before.
taka87 said:
Only Sorry for my bed English...
I charge the battery into the another battery charger. When I put the battery and try to turn on phone only lights but nothing ltter watch on the screen. When I try to reflash with new rom into SD card after that I push mute+OK(left size on the phone)+ power on buton only lights but nothing watch on display. After that I try to make master reset the result is same only display light nothing writing into display . When display is light I hold power on button after 20 seconds any song hear same as when I try turn on on dhe display watches anything as "Are ou sure want to power of phone ... YES/NO" . Do you thing the problem is softaware or hardware ? I don't know whats happen with this phone before.
Click to expand...
Click to collapse
this is how to reset
1. Press the power button to turn off the HP iPAQ.
2. Press and hold the Voice Commander button on the left panel of your HP iPAQ and the power button at the same time.
3. Hold the buttons for 2 seconds.
4. A Clean Boot message displays, indicating successful restoration of factory settings on your HP iPAQ.
I can't say exactly because it's not in my hand but try this tutorial to see if phone is software bricked
http://my.opera.com/Wutske/blog/2009/12/25/bricked-ipaq-614c-dnw-to-the-rescue
if not working sorry but this is hardware problem
good luck and tell me more about results!
ruscan.calin said:
this is how to reset
1. Press the power button to turn off the HP iPAQ.
2. Press and hold the Voice Commander button on the left panel of your HP iPAQ and the power button at the same time.
3. Hold the buttons for 2 seconds.
4. A Clean Boot message displays, indicating successful restoration of factory settings on your HP iPAQ.
I can't say exactly because it's not in my hand but try this tutorial to see if phone is software bricked
http://my.opera.com/Wutske/blog/2009/12/25/bricked-ipaq-614c-dnw-to-the-rescue
if not working sorry but this is hardware problem
good luck and tell me more about results!
Click to expand...
Click to collapse
Hi, i am having a similar issue. I just received a brand-new battery for the HP 614c and no matter how much i charge it (even after the green light turns-on) it switches off seconds after being disconnected from AC saying "low battery voltage detected, switching off within 10 seconds, YES/NO" (while you can't actually press any option), is there anything to do with this problem? I bought this battery cause i thought it was due to the old one but the same thing is happening.
Thank you.
hey,
my callphone (samsung galaxy s captivate) restarts by itself sometimes (~once a week or 2). i can live with that , but my problem is when it restarts like that while i'm asleep , and the phone is connected to the charger, because what happens then is that it enters charging mode (when the screen shows a big recharging battery) instead of just restarting and booting to the OS (and as a result , the alarm doesnt wake me up).
my question is: is there any way to change that behavior ? i mean is it possible to make the phone turn on and boot to the OS if it was turned off and then connected to a charger (or restarted while connected to a charger) ? is it the kernel or the hardware that makes to boot into the charging mode instead of the OS ?
thanks
bobo122 said:
hey,
my callphone (samsung galaxy s captivate) restarts by itself sometimes (~once a week or 2). i can live with that , but my problem is when it restarts like that while i'm asleep , and the phone is connected to the charger, because what happens then is that it enters charging mode (when the screen shows a big recharging battery) instead of just restarting and booting to the OS (and as a result , the alarm doesnt wake me up).
my question is: is there any way to change that behavior ? i mean is it possible to make the phone turn on and boot to the OS if it was turned off and then connected to a charger (or restarted while connected to a charger) ? is it the kernel or the hardware that makes to boot into the charging mode instead of the OS ?
thanks
Click to expand...
Click to collapse
Might Be a hardware issue. You can Try Wipeing Data But if you are rooted or not stock rom use Recovery.
Trozzul said:
Might Be a hardware issue. You can Try Wipeing Data But if you are rooted or not stock rom use Recovery.
Click to expand...
Click to collapse
it probably a hardware issue (the restarting) .. i'm using custom rom, and i tried 2 roms (and i wiped everything including formatting system partition) but the problem is still there . thats the reason i'm trying to find a work around .
if its the kernel that makes the phone boot into charging mode when it gets connected to charger while turned off, then i guess its possible to change the functionality and make it boot the OS instead of the charging mode. but if its the hardware then i'm doomed.
google didn't help me so i posted here hopping that kernel developers answer my question.
thanks for the reply
Don't knows hat to tell ya then kernels do that sometimes.
Sent from my LG-LG730 using xda app-developers app
i eventually found nomoahpowa! that can do what i was looking for, but its not working on JB .. is there anyone here that knows how can i do something similar ? (i'm a computer science student, i can code)
Dear friends ..I have a problem and I hope that I find resolved by you
When the mobile is off then I turn it on The screen does not light up and the LG logo Do not appear and hear only the startup tone and wait for seconds and then press the power button Until the screen lights up.This also happens when charging Mobile When is off the charging indicator does not appear. I know it's a small problem but it is causing me distress.... The other problem is that NFC.. When press the button to turn this feature on does not respond ..... almost I did not show this problem until after the update to version 10i
Please I want a solution to these problems ..Note / I did factory settings, several times and I've also UPGRADE RECOVERY Without any result
thank you
walid elsaid said:
Dear friends ..I have a problem and I hope that I find resolved by you
When the mobile is off then I turn it on The screen does not light up and the LG logo Do not appear and hear only the startup tone and wait for seconds and then press the power button Until the screen lights up.This also happens when charging Mobile When is off the charging indicator does not appear. I know it's a small problem but it is causing me distress.... The other problem is that NFC.. When press the button to turn this feature on does not respond ..... almost I did not show this problem until after the update to version 10i
Please I want a solution to these problems ..Note / I did factory settings, several times and I've also UPGRADE RECOVERY Without any result
thank you
Click to expand...
Click to collapse
try installing the stock rom...it will solve all ur issues
hit thanks rather writing thanks
Since I've installed this beautiful rom "[Rom] [PMEM] [RC #1.2] [Arc/s] [KitKat] [Official] [AORP - 4.4.2]" I noticed that when I put my device in stand-by (pushing the power button only once), the display of my arc-s doesn,t really turn off. I can see it isn't really black, but there is a light in the background. After several attempts i can finally have a black screen. What could be the problem? May this inconvenience drain my battery?
pietroluc said:
Since I've installed this beautiful rom "[Rom] [PMEM] [RC #1.2] [Arc/s] [KitKat] [Official] [AORP - 4.4.2]" I noticed that when I put my device in stand-by (pushing the power button only once), the display of my arc-s doesn,t really turn off. I can see it isn't really black, but there is a light in the background. After several attempts i can finally have a black screen. What could be the problem? May this inconvenience drain my battery?
Click to expand...
Click to collapse
Ok first of all have a better title
There might be a problem with the power button connection (i had this)
Please tell me which device you have so i can tell you how to do it
unded2012 said:
Ok first of all have a better title
There might be a problem with the power button connection (i had this)
Please tell me which device you have so i can tell you how to do it
Click to expand...
Click to collapse
Sorry for the wrong title.
I have an arc s, but i haven't a problem with the power button. In fact if i flash another custom rom I don't have this problem?
pietroluc said:
Sorry for the wrong title.
I have an arc s, but i haven't a problem with the power button. In fact if i flash another custom rom I don't have this problem?
Click to expand...
Click to collapse
This might be a glitch with your ROM then!
Issue-When device is off and you plug charger, charging symbol appears on the screen but nothing else happens. After that you can't boot the device with power button and that symbol remains even if you remove the cable. Only way to boot is to press Vol - & power. It's not a big issue but very annoying. Anyone else running custom ROM, please check & confirm what happens when you put charging cable with phone off? Anyone know how to fix?
I have flashed many ROMs including GSIs as I thought this was a ROM issue but issue remains on every ROM. Currently running lineage-17.1-20200413-UNOFFICIAL-treble_arm64_avN which is working fine/
Hi. That charge symbol only works with one ui ROMs.
By the way can you give the link of lineage is you are using? And your vendor version? Do you have root access?
Oh you're talking about offline charging, yeah like the previous person it works only One UI rom, On GSI it won't and it's a known issue.
Edit : don't discharge your phone to zero.