TWRP RECOVERY - 2.8.4.0 - XOLO Q3000
Procedure to follow
download the recovery.
then flash recovery using sptools /flashify /mobileuncle tool.
follow this thread to know how to flash recovery.
OR
if ur using any custom recovery from this thread then
visit this thread to get a flashable recovery which can be flashed from current recovery.
Just reboot to recovery for confirmation.
This is working recovery - tested by me.
flashed JB & KK rom.
Backup and restore without any issues.
As u all know our device has 6mb recovery partition size.
So while porting i need to trim the actual recovery.
U will not be able to partition ur sd card using this recovery.
Also u wont be able to root using this recovery.
For above issues we have better solutions.
Try and report.
For official change logs, see here:
http://teamw.in/project/twrp2
Credits:-
needrom for base recovery.
@z31s1g for TWRP themes.
Working great... :good:
Sent from my XOLO Q3000 using XDA Free mobile app
avi3230 said:
TWRP RECOVERY - 2.8.4.0 - XOLO Q3000.....
U will not be able to partition ur sd card using this recovery.
Also u wont be able to root using this recovery......
Click to expand...
Click to collapse
will try this asap. in the meantime, @avi3230, please see this post and reply. thanks.
Related
Hi guys,
I am pretty new to this android arena, still manage to learn few basic things, like rooting, flashing custom ROMs, updating CWM etc. I have MMX Canvas HD A116 and 2 days back MMX has released v4.2.1 for Canvas HD. Though I have also found flashable ROM of v4.2.1 but I have been thinking little differently.
1. Can we flash nonflashable ROM without recovery.img just to save our CWM means just deselect the recovery.img after loading scatter file i.e. MT6589_Android_scatter_emmc
OR
Can we use CWM v6.0.3.0.img instead of recovery.img of stock ROM so that CWM will get flashed along with the ROM?
Is it safe to do it this way or should we stick to the traditional method of first flashing it normally that is first flash the stock ROM using SP Flash Tool and then flash the Recovery image of v6.0.3.0?
nice_guy75 said:
Hi guys,
I am pretty new to this android arena, still manage to learn few basic things, like rooting, flashing custom ROMs, updating CWM etc. I have MMX Canvas HD A116 and 2 days back MMX has released v4.2.1 for Canvas HD. Though I have also found flashable ROM of v4.2.1 but I have been thinking little differently.
1. Can we flash nonflashable ROM without recovery.img just to save our CWM means just deselect the recovery.img after loading scatter file i.e. MT6589_Android_scatter_emmc
OR
Can we use CWM v6.0.3.0.img instead of recovery.img of stock ROM so that CWM will get flashed along with the ROM?
Is it safe to do it this way or should we stick to the traditional method of first flashing it normally that is first flash the stock ROM using SP Flash Tool and then flash the Recovery image of v6.0.3.0?
Click to expand...
Click to collapse
Please stick on to the stock recovery while flashing. Afterwards u can flash the cwm u want!! I prefer ur second option, coz there are chances u can be stuck at bootloop!
Hit thanks rather than typing it
parkourkarthik said:
Please stick on to the stock recovery while flashing. Afterwards u can flash the cwm u want!! I prefer ur second option, coz there are chances u can be stuck at bootloop!
Hit thanks rather than typing it
Click to expand...
Click to collapse
Means I can select CWM recovery image in place of stock recovery.img and flash with all other files of stock ROM?
nice_guy75 said:
Means I can select CWM recovery image in place of stock recovery.img and flash with all other files of stock ROM?
Click to expand...
Click to collapse
Nope!! You got it in the wrong way. I meant to flash the cwm seperately! After installing ur firmware
And if u can possibly select seperate files while flashing through the sp flash tool, u can select cwm recovery instead. Don't know much on sp flash tool
Hit thanks rather than typing it
parkourkarthik said:
Nope!! You got it in the wrong way. I meant to flash the cwm seperately! After installing ur firmware
And if u can possibly select seperate files while flashing through the sp flash tool, u can select cwm recovery instead. Don't know much on sp flash tool
Hit thanks rather than typing it
Click to expand...
Click to collapse
One user tried my way of flashing i.e. unchecking the recovery.img and it did work, his CWM recovery is still intact. I believe flashing my way is safe, if something goes wrong, your CWM Recovery would still be intact and we can flash another ROM using CWM.
Sent from my Micromax A116 using XDA Premium HD app
nice_guy75 said:
One user tried my way of flashing i.e. unchecking the recovery.img and it did work, his CWM recovery is still intact. I believe flashing my way is safe, if something goes wrong, your CWM Recovery would still be intact and we can flash another ROM using CWM.
Sent from my Micromax A116 using XDA Premium HD app
Click to expand...
Click to collapse
Then u can carry on
Sent from my A500 using Tapatalk 2
I hav a rooted pico with CWM recovery v5 and using CM10 build 6..
i wanted to ask if its ok to flash TWRP recovery over my existing one directly using the instructions given
or do i hav to do anythng else before doing that??
kunaltyagii said:
I hav a rooted pico with CWM recovery v5 and using CM10 build 6..
i wanted to ask if its ok to flash TWRP recovery over my existing one directly using the instructions given
or do i hav to do anythng else before doing that??
Click to expand...
Click to collapse
just follow the instructions to flash TWRP
Ps: Try Philz recovery .. Its Awesome Based On CWM
I like cwm 5 by yonnuo, and not like TWRP, but like UI of TWRP
because twrp no battery icon when charging with the off state
ru5l4n12 said:
I like cwm 5 by yonnuo, and not like TWRP, but like UI of TWRP
because twrp no battery icon when charging with the off state
Click to expand...
Click to collapse
Try philz recovery
It is cwm touch edition
Sent from my HTC Explorer A310e using xda premium
I am using SGT 2 7.0.. and forr using sensonic hd rom I need to flash twrp but I am already rooted with cwm... need help urgently... thnkx.. keep the good work goin guys...
There should be a flashable zip that you can run in cwm to install twrp.
If not you can use Odin or Mobile Odin to flash recovery.
There is a free version of mobile Odin I've used, you need to install a file but it guides you through.
Ill try to find links but I'm on my phone so if you have a PC it may be faster.
Sent from my SGH-T999N using Tapatalk
does I have to flash a specific twrp
Does I hav to flash a specific twrp that runs over cwm or any version works over it...? Help me guys....
debashish biswas said:
Does I hav to flash a specific twrp that runs over cwm or any version works over it...? Help me guys....
Click to expand...
Click to collapse
You can download the TWRP zip and install it in CWM as you do with a custom rom ("Install zip from sdcard")
debashish biswas said:
Does I hav to flash a specific twrp that runs over cwm or any version works over it...? Help me guys....
Click to expand...
Click to collapse
you can flash any twrp version over cwm but do make sure that you flash the one compatible for your device...
thnks man..
Thnks for helping me out..
XOLO Q3000 PURE STOCK DEODEXED ROM
Hii All XOLO Q3000 users,
After a long wait -
Finally I bring to you pure stock rom
Features -
[*]Pure stock android 4.2.1
[*]S011_25022014 version
[*]Pre rooted
[*]Fully Deodexed - for theming
[*]Busybox support
[*]init.d support
[*]Zipalined - better ram usage
[*]Root explorer
[*]No tweaks, Completely stock
This custom ROM is blazing fast and bug free.
Feel free to use this as base ROM.
Steps for installation -
1. Put the ZIP into the ROOT of External/Internal SD Card
2. Go to Custom Recovery (CTR, CWM, OTHER)
3. Take a nandroid backup (Just for safety)
4. Wipe Data
5. Wipe Cache
6. Wipe System
7. Wipe Dalvik Cache
8. Select Install From SD (Internal or External)
9. Select the zip file and Select YES
10. Reboot Your System
11. Enjoy
Note:
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM only flashes System & Data partitions and DOES NOT change anything else.
SO chances of brick are 0 but still, please keep nandroid Backup ready which will be used if you find issues in the ROM so that you can revert back to your old system.
SCREENSHOTS in ATTACHMENTS
DOWNLOAD LINK
https://drive.google.com/file/d/0B4vVVUdhiimhU19JNklZYmpPelU/edit?usp=sharing
future development-
adding Mods to make it more lighter and smoother...
All kind of support is appreciated....
Credits:-
hadiyalkishan - for the stock rom.
Zen Arcade for Auto-Deodexer 4.3
Chainfire - for supersu
Ryuinferno - for init.d support
Thank You... Share Your Views...
Reserved for future use.
Great stuff....somehow i have always felt this rom is faster than the Kitkat one...lol....thanks Avi....
That's right ROM is more Smother & Faster than any custom rom
Sent from my Q3000 using XDA Premium 4 mobile app
Guys problem with my handset
I purchased my set on 15 Aug.
It was pre-loaded with Build_Q3000_S011_25022014
I Rooted the phone and installed the Custom recovery also, was working fine.
But, I want to increase the internal storage so I patched the storage
After then I was going to recovery (for wipe data, cache, emmc etc.) but recovery is not coming up, just Xolo logo came and disappeared, nothing further
I tried CWM, CTR & TWRP, all, but in vein ...
And if I revert back to Stock recovery then it's going in stock recovery, but there I can't flash any ROM or update error came "installation aborted"
Then I flashed my phone with Build_XOLO_Q3000_S003_15102013
Same position .... no recovery is working ...
Even I flashed KitKat ROM also but still Custom recovery not working
Can anyone help me ?
aabidhashmi said:
Guys problem with my handset
I purchased my set on 15 Aug.
It was pre-loaded with Build_Q3000_S011_25022014
..........
Can anyone help me ?
Click to expand...
Click to collapse
try format+download option in spflash tools
aabidhashmi said:
Guys problem with my handset
I purchased my set on 15 Aug.
It was pre-loaded with Build_Q3000_S011_25022014
I Rooted the phone and installed the Custom recovery also, was working fine.
But, I want to increase the internal storage so I patched the storage
After then I was going to recovery (for wipe data, cache, emmc etc.) but recovery is not coming up, just Xolo logo came and disappeared, nothing further
I tried CWM, CTR & TWRP, all, but in vein ...
And if I revert back to Stock recovery then it's going in stock recovery, but there I can't flash any ROM or update error came "installation aborted"
Then I flashed my phone with Build_XOLO_Q3000_S003_15102013
Same position .... no recovery is working ...
Even I flashed KitKat ROM also but still Custom recovery not working
Can anyone help me ?
Click to expand...
Click to collapse
try installing TWRP of Carliv 2.2
somehow Latest ones dont seem to work for me too
Screen flickers frequently while normal use n gaming... When using any browser it flickers a lot.... Tried all browsers...
Sent from my XOLO Q3000 using XDA Free mobile app
dk_richardp said:
Screen flickers frequently while normal use n gaming... When using any browser it flickers a lot.... Tried all browsers...
Sent from my XOLO Q3000 using XDA Free mobile app
Click to expand...
Click to collapse
Its a jellybean rom.
If u use this over a kitkat rom then it can flicker, u need to use/flash jellybean uboot.img if it flickers.
Unboot.img
avi3230 said:
Its a jellybean rom.
If u use this over a kitkat rom then it can flicker, u need to use/flash jellybean uboot.img if it flickers.
Click to expand...
Click to collapse
How to do that?
Sent from my XOLO Q3000 using XDA Free mobile app
dk_richardp said:
How to do that?
Sent from my XOLO Q3000 using XDA Free mobile app
Click to expand...
Click to collapse
use sptools
select scatter of jelly bean
deselect all files
select only uboot
flash
Ok i will do that... Right now no pc... So will donit later...
Sent from my XOLO Q3000 using XDA Free mobile app
I want to flash custom rom on core i8262...
Right nw im on stock rom(not rooted)...
My question is if i want to flash SuperSU update.zip file, is it device specific or common for all devices ?
Right nw i have "UPDATE-SuperSU-v2.40" file... Can i flash it via Philz recovery ? And then directly flash rom(lollicop build 3)...
Is it ok ? Plz guide me...
Plz guyz help...
Is supeSU zip is device specific or common and can be flashed in any device via recovery ?
Supersu is same for all devices. Yeah you can install it using any recovery.
akrvd said:
Supersu is same for all devices. Yeah you can install it using any recovery.
Click to expand...
Click to collapse
Tried to flash lolicop build 3 but couldnt flash...
I first flashed Philz recovery
Then flashed superSU... It flashed successfully... Then rebooted device and took efs backup using Samsung Tool app...
Then rebooted to Philz recovey and when i tried to flash rom i couldnt...
Fon restarted again to normal stock rom...
Heart breaking...
I used Philz twice and no success...
Is it something wrong with it ?
Can using TWRP bring luck to me ?
Im using CM 12 on my i9082... But no luck with i8262 core for Custom Rom...:banghead:
Sent from my GT-I9082 using XDA Free mobile app
Can anyone help ?
Sent from my GT-I9082 using XDA Free mobile app