Hi all,
i have installed the new 8.1 preview of the win RT on my Surface RT 32GB tablet and i didn't do the recovery image for it.
someone can help me with an Recovery disk for this tablet please?
I have tried some 64Gb recovery images and obviously they don't work. I know that this will not be very a pleasant job to do, but still I have to get back to the original state with this.
Thanks in advance.
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
firststepsandroid said:
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
Click to expand...
Click to collapse
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
sd_shadow said:
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
Click to expand...
Click to collapse
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
firststepsandroid said:
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
Click to expand...
Click to collapse
Great, thanks for the update.
Solution ???
Please post how you fix this problem.I have the same issue and maybe others are looking for the fix too.
Thank you
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
I have sent you a private message
Where to get firmware to this device? Astar-y3 v11 i search everywhere
rock6963 said:
I have sent you a private message
Click to expand...
Click to collapse
Mine is Astar-y3 v11 10.1 the board is GA10H_V1.1 20141110
I been search for the firmware everywhere without any luck
This rom will works fine for your tablet , http://www.filefactory.com/file/15k...X0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
Flash (iso) file for Softwinner V11 A33
Hy,
I am looking for flash possibilities, because I deleted settings app from my Softwinner V11 chinese tablet, and it stays at first logo.
Android Build: astar_y3_eng 4.4.2 KVT49L 20150403 test-keys
Vendor: sun8i
SDK version: 19
Thanks in advance
Attila
all winner v11 10.1" tablet
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
akapusy said:
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
Click to expand...
Click to collapse
i'll send a PM with links, asap
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
What about gps ? Tablet : softwinner 717
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
Hey, I got 2 similar tablets for my kids - both are plagued with malware that won't go away on factory resets - du speed booster, du battery meter, 'facebook' popups on bottom right corner (kids don't have FB).....
The tablet seems to be rooted, and there's a recovery already in place.
Could someone kindly give me a malware-free ROM to flash please ? Any maybe indicate how to go about it ?
Basic info should be fine - I've rooted and custom rommed a number of devices....
thanks a bunch!
David
Hi would anyone happen to have the links to this firmware s my astar-y3 10.1 tablets giving me trouble?
Cheers
digitiser dont work now
gewoonrobbie said:
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
my digitiser does not respond at all
I can see that you have been bombarded.
Sorry that so many people are looking to you for a33 flash files and i am additionally sorry for adding to it. My a33-10ql-v1.1 flash file seems to be the "Bigfoot" of flash files. I cannot, for the life of me, find the file. I have been searching, relenlessly, since December last year. Im not usually one to stack on a full pile but i sure could use the help. If you could bring youself to find the time i would be forever greatful. Thank you, whether you can or cannot. Have a great evening.
A few days ago I rooted my phone, using ADB commands it let me but into bootloader but my phone didn't show the option to boot into recovery. It turned out i had to use another usb-c cable and then it did
Hello , i have a problem with Microsoft servers because i tried to download the recovery image several times and always it didnt complet , so anybody have mirror link ?
I have the same problem, my device still under warranty so they want me to send it in for a new one. I've searched everywhere and can't find it. Mines windows 10.
I've got Surface stock images.
Hi Trig0r,
I have the same problem and need the surface pro 3 stock images, I had install windows 10 on it but im not able to activate, please help
Hello! This is my frist post.. I hope someone here can help me..
Yes, Onda has his own forum, but is almost dead :crying:
So, here's my problem:
I have a Onda V919 3G Air Dual OS with 64GB of storage.
I tried to install Remix Os on it, doing this, I deleted windows 10. I knew it would happen, but I thought I had no problems installing it again...
So I put the Windows 10 ISO on an USB, connected it to the tablet and using an external keyboard I boot the tablet with the USB.
For a second, all seems working, but suddenly I have a blue screen with "acpi_bios_error". (maybe I can make a video about this)
I made some research online and:
- I tried other ways to create the windows USB, without luck.
- Seems I can update the BIOS only through Windows... And seems I have already the last BIOS (I'm not 100% sure)
Other infos:
- I tried messing up something with the bios, without luck. Anyway I reset it.
- I tried installing Linux, without luck.. I'll try again and again.
- This guide* says that I should see "windows install" when I press F7, but I don't see it.. even if I follow all the steps.
*= ondaforum dot com/topic/2940-v919-3g-air-dual-os-windows-81-or-10-fresh-install-from-usb/
Thanks!
Lombrollo said:
Hello! This is my frist post.. I hope someone here can help me..
Yes, Onda has his own forum, but is almost dead :crying:
So, here's my problem:
I have a Onda V919 3G Air Dual OS with 64GB of storage.
I tried to install Remix Os on it, doing this, I deleted windows 10. I knew it would happen, but I thought I had no problems installing it again...
So I put the Windows 10 ISO on an USB, connected it to the tablet and using an external keyboard I boot the tablet with the USB.
For a second, all seems working, but suddenly I have a blue screen with "acpi_bios_error". (maybe I can make a video about this)
I made some research online and:
- I tried other ways to create the windows USB, without luck.
- Seems I can update the BIOS only through Windows... And seems I have already the last BIOS (I'm not 100% sure)
Other infos:
- I tried messing up something with the bios, without luck. Anyway I reset it.
- I tried installing Linux, without luck.. I'll try again and again.
- This guide* says that I should see "windows install" when I press F7, but I don't see it.. even if I follow all the steps.
*= ondaforum dot com/topic/2940-v919-3g-air-dual-os-windows-81-or-10-fresh-install-from-usb/
Thanks!
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Unfortunately I can only redirect you to general help forums where you might be able to find help
http://forum.xda-developers.com/android/help
&
http://forum.xda-developers.com/general/help
Good luck
Sam Nakamura said:
Hello and welcome to xda-assist,
Unfortunately I can only redirect you to general help forums where you might be able to find help
http://forum.xda-developers.com/android/help
&
http://forum.xda-developers.com/general/help
Good luck
Click to expand...
Click to collapse
Thanks but I think now my tablet is dead.
I changed a setting on the BIOS and now it does not even boot