Hi, I was wondering I just recently bought a Nobis 7.85" Tablet, and for some reason everytime I shut down the tablet and start it up again, it does a factory reset, and I have to start all over and put in my information each time. I heard that if I root the tablet, and have full access to it, I could try to fix the problem by downloading Root Explorer. I'm not sure though how I could root it. Does anyone know what works best for this brand of Android tablet? Or does anyone know what else I could do to fix this problem? Thanks.
Same here
MR1992 said:
Hi, I was wondering I just recently bought a Nobis 7.85" Tablet, and for some reason everytime I shut down the tablet and start it up again, it does a factory reset, and I have to start all over and put in my information each time. I heard that if I root the tablet, and have full access to it, I could try to fix the problem by downloading Root Explorer. I'm not sure though how I could root it. Does anyone know what works best for this brand of Android tablet? Or does anyone know what else I could do to fix this problem? Thanks.
Click to expand...
Click to collapse
I am having the same problem, did you find a solution yet?
I think it's not a problem of your ROM as I have seen some people have tried in recovery mode too and they are getting errors in mounting drives...So their may be some problem in the kernel for your Device..As u said u recently bought it try contacting ur seller or i think try installing a new ROM..
New ROM
loveymangal said:
I think it's not a problem of your ROM as I have seen some people have tried in recovery mode too and they are getting errors in mounting drives...So their may be some problem in the kernel for your Device..As u said u recently bought it try contacting ur seller or i think try installing a new ROM..
Click to expand...
Click to collapse
Any suggestions as to where to get a "new ROM"?
Related
Hey, I'm new to the forum and I came here to desperately seek help on saving my tablet's life.. So It's obvious that I'm new to flashing too because today I tried to upgrade my android version to Froyo with Rockchip tools, I held down power + home buttons, I plugged in the usb, I installed the drivers and the program recognized my tablet. So I began flashing but at the middle of the process an error message came up that said something like: "can't continue flashing, restart process" or something like that, so when I unplugged the usb to restart the process, first I tried to boot my device and found out it could no longer boot neither it could be detected from my computer in flashing mode!! Plss tell me how can I fix this, my mom's gonna kill me..
Oh and I forgot to mention that afterwards I realised that the rom was actually not meant for my device ^^
PS I'm very sorry if I posted in the wrong place or if I seem pretty noob but it's kinda.. true Any help would be appreciated! Thanks!
hmm... it might help if you tell people which tablet & model you are trying to fix
people here might be developer, might be techie, but i doubt any of us are mind reader
AllGamer said:
but i doubt any of us are mind reader
Click to expand...
Click to collapse
Lol
@op yea tell sumtin bout your device and a link from where you downloaded the rom
AllGamer said:
hmm... it might help if you tell people which tablet & model you are trying to fix
people here might be developer, might be techie, but i doubt any of us are mind reader
Click to expand...
Click to collapse
Well it's a Prestigio Multipad 5070 and the rom.. well I downloaded an android froyo rom from the Prestigio site but it was for another model..
Hi All,
I just rooted the Android Note N9000 (i9220) but wanted to install some custom apk in sys\app folder to change the look and feel. I was able to this at a great extent using TouchWiz apk and all looked good until i went ahead and decided to change the browser apk in the sys\app folder.
I went ahead and downloaded the browser apk from online and then renamed the old browser.apk file as browserold.apk and this is were the phone started alerting to stop some application and after that phone rebooted.
Once it rebooted it does not go beyond the "Logo" screen and it keeps flashing that so went ahead and tried few of this options but no luck,
Recovery mode - Unfortunately i did not do any back-up and cleaned partitioned and cache but unable to do anything beyond that?
I do not have Custom Recovery Mod also with me so no much luck there also
I tried connecting to PC but the phone recognizes in Control Panel of Windows 7 but the drive is not available to install any file...
Please help!!!!! Need to get this phone back to normal asap.
Regards
tienned mmand
Hello, I know this isn't related but would you recommend that phone? I want to buy a chinese version but not sure which to pick.
Thanks
MrStuky said:
Hello, I know this isn't related but would you recommend that phone? I want to buy a chinese version but not sure which to pick.
Thanks
Click to expand...
Click to collapse
I would recommend to go on one from known brands and not to deal with bull****!
Sad to be said you need to flash with the original firmware again with SP_Flash_Tool_v3.1206.01. By the way how do you root this phone N9000??
Can you help me root with what method??
did u use TPSparkyRoot??
neourbon said:
Sad to be said you need to flash with the original firmware again with SP_Flash_Tool_v3.1206.01. By the way how do you root this phone N9000??
Can you help me root with what method??
did u use TPSparkyRoot??
Click to expand...
Click to collapse
tpsparkyroot not work for me, it need to booting 3x times
1st time booting done well
2nd time booting -> not recognized device
did this also happened to you ?
Hi murtuzainab,
Hope you were able to fix the problem with your device? However, I do need an assistance from you, I use the same device Android Note N9000 i9220 and would love you to teach me how to root it. Please note I'm a newbie to Android so pls try to be as detailed as possible.
Many thanks,
Ayodele
murtuzainab said:
Hi All,
I just rooted the Android Note N9000 (i9220) but wanted to install some custom apk in sys\app folder to change the look and feel. I was able to this at a great extent using TouchWiz apk and all looked good until i went ahead and decided to change the browser apk in the sys\app folder.
I went ahead and downloaded the browser apk from online and then renamed the old browser.apk file as browserold.apk and this is were the phone started alerting to stop some application and after that phone rebooted.
Once it rebooted it does not go beyond the "Logo" screen and it keeps flashing that so went ahead and tried few of this options but no luck,
Recovery mode - Unfortunately i did not do any back-up and cleaned partitioned and cache but unable to do anything beyond that?
I do not have Custom Recovery Mod also with me so no much luck there also
I tried connecting to PC but the phone recognizes in Control Panel of Windows 7 but the drive is not available to install any file...
Please help!!!!! Need to get this phone back to normal asap.
Regards
Click to expand...
Click to collapse
Hi There,
Please forgive me I am a complete novice when it comes to Android phone.
I have a chinese Dual sim phone that I have routed with superoneclick. I have put clockworks recovery on it with rom manager as I was trying to create a copy of the ROM. I also installed Droid X Recovery Bootstrap, however in droid x I pressed the fix permission option and the phone started changing permissions everywhere and now my phone wont start. It keeps booting up in a loop and I cannot get to the recovery to wipe the memory and start again
What SOC does the device use?
If its Allwinner based, you could boot from mmc or reflash with livesuit.
21ss, thank you for the reply.
Sorry my friend, I have no idea what you mean by What SOC does the device use?
You say that you can boot from the mmc slot, please tell how and with what software.
Never heard of livesuit.
I have attached a word document in rar of the ebay item that I purchest.
Any help that you can give me would be very much appreciated.
At the moment I have a paper weight.
Regards chunky2.
similar problem /
chunky2 said:
21ss, thank you for the reply.
Sorry my friend, I have no idea what you mean by What SOC does the device use?
You say that you can boot from the mmc slot, please tell how and with what software.
Never heard of livesuit.
I have attached a word document in rar of the ebay item that I purchest.
Any help that you can give me would be very much appreciated.
At the moment I have a paper weight.
Regards chunky2.
Click to expand...
Click to collapse
Sir
i have a dual sim android 2.3.4 chineese mobile with brand name ilus
i have the same problem after rooting the phone , i opened ROM MANAGER and when clicked for backup , it asked for clockworkmod recovery and searched for the models , as i didnt find my model , i scrolled any other options, i found fix permission , when i clicked it permissions were altered and asked me to boot and when i went for boot the phone stopped booting and is in boot loop
Kindly help me how to recover the phone , as i dont have the custom rom
nvksrinivas
Hey guys the good thing about this phone is that you cant brick it, it cant be hard bricked easily... but I suggest you go to this discussion and find possible solutions, I had same issue and even tho I never managed to fully sort the issue, its because of my laziness... I could if I wanted, I managed to get it to a position I can use it and I have been using it like so for months now... here is the link http://forum.xda-developers.com/showthread.php?t=1618775&page=3
Godd afternoon to everyone, I have a problem with my nexus s. as the title, broke the power button .. so out of the blue. I solved the problem by installing apk that allowed me to work around this problem .. so I decided to change rom: then download and install everything, just that when you install the gapps I realized that they were corrote! so I'm not part of the setup wizard, I can not access the options, I can not do anything at all and now I have a phone that is as good as a doorstop, since the only thing I can do is connect it to your PC as a mass storage . I tried using the adb without success to be able to start in bootloader mode but without success with "error: device not found". I do not know if the debug mode is active but do not think so! I do not know what to do I hope someone can give me good advice on what to do. Hello to all.
p.s. sorry for translation (google docet)
19pici87 said:
Godd afternoon to everyone, I have a problem with my nexus s. as the title, broke the power button .. so out of the blue. I solved the problem by installing apk that allowed me to work around this problem .. so I decided to change rom: then download and install everything, just that when you install the gapps I realized that they were corrote! so I'm not part of the setup wizard, I can not access the options, I can not do anything at all and now I have a phone that is as good as a doorstop, since the only thing I can do is connect it to your PC as a mass storage . I tried using the adb without success to be able to start in bootloader mode but without success with "error: device not found". I do not know if the debug mode is active but do not think so! I do not know what to do I hope someone can give me good advice on what to do. Hello to all.
p.s. sorry for translation (google docet)
Click to expand...
Click to collapse
Hello,
Maybe you can use this good guide ?
which guide?
cyrillem28410 said:
Hello,
Maybe you can use this good guide ?
Click to expand...
Click to collapse
maybe ,but, where?
sell
thanks to everyone for the availability, but in the end, having no solutions, I decided to sell the nexus s! If someone is planning to buy it, because it is able to repair it or maybe in order to use the pieces as a spare, it's on ebay with this title: Nexus s Model GT-IT9020T (i can't post any link)
19pici87 said:
thanks to everyone for the availability, but in the end, having no solutions, I decided to sell the nexus s! If someone is planning to buy it, because it is able to repair it or maybe in order to use the pieces as a spare, it's on ebay with this title: Nexus s Model GT-IT9020T (i can't post any link)
Click to expand...
Click to collapse
Before you sell it.. I have a thought, couldn't hurt right?.. Nexus Root Tool Kit can take a "bricked" phone and re-flash to stock, oem lock and unroot.. There have been posts that said that flashing to stock has helped with the power button, assuming that it isn't actually broken and just needs reset.. So give it a try, you can PM me if you have questions..
Since you are selling it for parts, this could let you sell it as working, or you could keep it and close the sale..
After official firmware update V1.06 (that has failed to update), the tablet doesn't work anymore.
There comes an error message: 'No command' and factory reset won't work.
How can I get my tablet in the state that he boots normally again?
*bump*
It's a urgent matter.
Should i buy the same one again under warranty? (because to send it back and wait is nothing for me) or are there methods to recovery it back to normal state?
Hay.
I have same problem, after OTA update somthing went wrong.
And my tablet saying "no command".
I don't know if other Cube users like you have the same problem with this tablet, because there is a chance that there is an defective/faulty stock with this problem.
I've contacted Cube and also the shop where i have bought the tablet about the problem. I think that is the only solution.
Hope we can get some solution to this problem.
Yes, I hope also.
Only solution i find thats working to put back stock rom.
And my tablet is live again
That is not something simple unfortunately.
I get answer later this week, so I'm curious.
Still in contact with the shop, I hope that there will be an solution soon.
Im afreid that you must put fresh rom.
This update is broken.
That is only possible if your computer has the connection with the tablet, otherwise that will not work.
My guess is, is that the update has wiped out the android files, so that there are no files to update.
Not exactly the same problem, but can't install update... It says: prob with build prop. I didn't change anything in it!
I tried twice, and the 1st time I had difficulty to reboot: I had to push on/off button during a log time to turn it off. After that the tablet started.
What kind of update manufactured Cube ?!
'The tablet can be refund or resend within a month if it has any quality problem.We have one year warranty for tablet repairment if your tablet has quality problem,but the damage by factitious factors is not included.'
That is their answer.
I thought on buying a new one, but I don't want to take the risk that this will happen again.
The alternative is not to update.
I don't know how the other cube tablets react on this update., but it seems fine on other models.
Here is the latest update for your tablets. I dont have one myself, I have the Cube T7, but the guy does it for all of them I think http://yun.baidu.com/share/home?uk=288410357#category/type=0
cube update
have anyone manage to download the updates from the site and care to share?
went there and it's all in Chinese and need to register with Baidu or some sort
How to install android 5.0 on cube talk 7 u51gt c8 ?please tell me....
Me to wants to know how to update to lollipop
Adnan malik43 said:
How to install android 5.0 on cube talk 7 u51gt c8 ?please tell me....
Click to expand...
Click to collapse
have you heard or found any info?
Adnan malik43 said:
How to install android 5.0 on cube talk 7 u51gt c8 ?please tell me....
Click to expand...
Click to collapse
h t t p:/ / getlollipop.xyz/update-cube-talk7x-quad-core-u51gt-c4-8gb-3g-black-to-5-0-lollipop/