XOLO Q3000 RECOVERY COLLECTION
Hiii All XOLO Q3000 users,
I bring to you collection of recoveries for our beloved XOLO Q3000.
STOCK RECOVERY
Jelly Bean
JB 4.2.1 S003
JB 4.2.1 S011
KitKat
Kitkat 4.4.2 S007 version
======================================================================================================
CUSTOM RECOVERY FOR ANDROID JELLY BEAN
Carliv Touch Recovery BASED
Carliv Touch Recovery v2.1
Carliv Touch Recovery v2.2
Carliv Touch Recovery v2.4
Carliv Touch Recovery v2.5
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ClockworkMod- CWM- BASED
CWM 5.5.0.4
CWM 6.0.2.8
CWM 6.0.3.2
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
====================================================================================================
CUSTOM RECOVERY FOR ANDROID KITKAT
ClockworkMod- CWM- BASEDCWM based 6.0.2.8
ClockworkMod 6.0.3.3 Recovery (CWM) Non-touch
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Carliv Non-Touch Recovery BASED
Modified Carliv CWM (non-touch) CWM 6.0.4.4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Carliv Touch Recovery BASED
Carliv Touch recovery 3.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PhilZ Touch BASED[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 aroma fixed
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1 aroma fixed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TeamWin Projects - TWRP BASED
TWRP 2.7.0.0
TWRP 2.8.0.0
TWRP 2.8.1.0
TWRP 2.8.2.0
TWRP 2.8.4.0
TWRP 2.8.4.0 rev 2
TWRP 2.8.5.0
====================================================================================================
So dont get confused which one to use from all above.
THE BEST CUSTOM RECOVERY
For JELLY BEAN Carliv Touch Recovery v2.5
For KitKat- use anyone
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
TWRP 2.8.5.0
Test and report.
If you have any other working recovery please PM me.
HOW TO USE/FLASH CUSTOM RECOVERY.
CREDITSCredit goes to all involved in making them. (CWM team, TWRP team, PhilZ team, Carliv,yuweng)
hadiyalkishan- for JB & KK stock & testing
m0han - for ctr 2.5, for JB testing
rufus.reynolds - for KK testing
Jagadish-ravi - for JB & KK testing
vijay jay - for TWRP 2.7 testing
@Santhosh M - for TWRP 2.8.1.0
Thank You... Share Your Views...
Many users dont know how to flash a custom recovery.
so i am making this thread which will guide u to flash a custom recoveries present in above thread.
If ur phone is rooted (supersu/superuser app is present in app drawer).
Method 1
Download and install flashify app from playstore
download custom recovery from above post.
Open flashify.
Backup current recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goto flash
recovery image
Choose downloaded recovery.img (it may have different name)
Now u can reboot.
To boot into recovery
press vol up button, keep it pressed.
press power on button till u see boot logo.
release power button.
after going into recovery release vol up button.
Method 2
Mobile uncle tool
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
If ur phone is not rooted
What's needed:
USB data cable
MediaTek USB VCOM drivers thanks to @smokerman sir
SP Flash Tool
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
Press download button.
attach ur switched off phone with usb cable.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
PLEASE PRESS THANKS BUTTON IF THIS HELPS
This just keeps getting better and better.....thanks millions....Avi....well collated recovery thread.....its has everything we need....
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Vineet3 said:
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Save ur recovery and try S011.:good:
CTR 2.5 can be used to flash both JB & KK ROMs.
but backup & restore is not possible.
Thanks to @Jagadish-ravi
stuck at download mode
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Sagar_Patel said:
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Click to expand...
Click to collapse
First thing is
Please dont quote whole post.
it is posted by me only and just few post above on same page.
Ur screenshot is very poor cant see anything please re upload with good resolution.
after pressing that download button u need to connect ur phone in switched off condition.
r u doing this as instructed.??
Please explain the process ur following?
Ur porting cwm means??
Or u mean to say flashing/installing??
which cwm ur using please specify.?
ow! sorry for the way i had posted the thing but thanks for the way you replied- it was quite Quick!!
so, herewith i have attached the zip file (for the better resolution) and jpg file as well (size i could manage within the limitation of this forum) of screenshot where i stuck...View attachment 083.zip
yes, i connected my phone in switched off condition after pressing download button...
i had followed exactly the same way as you have explained for the non-rooted device....
and it was newbie thing that i had written "porting cwm" instead of "installing/flashing cwm"...yes, i was trying to flash/install cwm...
recovery i tried to install is:- [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Thanks for helping me...
sorry i had just forgotten to mention the scatter file i had used....obviously yes, it is the same as you have uploaded as:-
avi3230 said:
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
Click to expand...
Click to collapse
however, i had to rename it as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php
also note that i had put zip file of recovery [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 and that scatter file in same folder as well....
kindly check if i had done any mistake there...
i have attached the scatter file to which i had renamed...
sp flash tool stuck at download mode?
ok may be i have found the mistake while posting just above the procedure i had done!!!
sp flash tool stuck at the download mode may be because i had done mistake (if it is?! ok, i cant confirm it until i can get xolo q3000 back to me or until someone here can confirm that yes, this was the mistake) as below:_
i had downloaded zip file of recovery
then i had downloaded scatter file of xolo q3000 as mentioned in my previous post
i had renamed the scatter file i had downloaded as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php (may be silly newbie thing here!!!)
i had put both those files in same folder
and did rest of the procedure as mentioned by avi3230 (OP) here in same thread for non-rooted xolo q3000 just a few posts above...
...and what should i have done?
i should have downloaded only the zip file of desired recovery and then if i extracted it, i could find that there are all the necessary files including recovery.img and scatter_file within the extracted folder!!!
i would like to attach screenshot of wrong thing i had done:- image named as "wrong"
and what i should have done is may be here:- image named as "may be"
i think i was trying to install zip file instead of recovery.img that should be there in extracted folder of recovery.zip along with the scatter_file as well...so, here now i have got where and why i had confused
Put scatter file and recovery image in same folder.
Click to expand...
Click to collapse
ok, if zip file of recovery has properly zipped, has properly downloaded and if it has properly extracted then you should find both the recovery.img and scatter_file within extracted folder....if not so, then you should put (get together) the scatter file and recovery image in "same folder" means in extracted folder....
confused? then i can only say sorry for my english but why i had posted the whole thing here? may be because someone can find that what kind of silly things those can be done by newbies....and if so, they can help....
Sagar_Patel said:
ok may be i have found the mistake while posting just above the procedure i had done!!!
.
Click to expand...
Click to collapse
OK dont worry about ur English or anything wrong u doing.
just follow these steps
this is considering ur running kitkat on ur phone (S003 or S007 build no)
download
1. SP_Flash_Tool
2. philz recovery - this or this
3. drivers - from here
extract drivers folder- mtkusball 0.9.2
open smartphone driver folder - x86/x64 according to ur windows os and install drivers.
or just select from autoinstall folder
connect ur phone in switch off condition to pc.
when asked fro drivers use MT65xx preloader drivers.
when u connect switched on phone and if asked for drivers use - android winusb drivers.
(please check in device manager after connecting ur phone in each case whether drivers are installed or any red triangle is ther)
restart ur computer.
extract sp tools in folder
extract philz recovery in a folder (it is in 7z or rar format just extratc in folder in winrar)
in philz folder u have scatter file, recovery.img boot.img and lk,bin files
start sp flash tools
select scatter loading
select scatter file from philz folder
deselect uboot and bootimg
press download button
connect ur switched off phone to usb cable.
flashing will be done
confirmed by green circle.
boot in recovery by pressing power + vol up button.
Reply if any issues.
avi3230 said:
OK dont worry about ur English or anything.....
....Reply if any issues.
Click to expand...
Click to collapse
just to add.... tip1: use usbdeview (g00gle) to remove all usb devices before adding your mobile device.
tip2 (based on my experience): try a previous (older) clean version of w!nd0ws also before giving up.
avi3230 said:
TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
THE BEST CUSTOM RECOVERY
For JB
Carliv Touch Recovery v2.5
For KK
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Click to expand...
Click to collapse
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
m0han said:
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
Click to expand...
Click to collapse
Yeah already seen that no support for philz now.
TWRP is bigger in size and u need to change partition size of recovery.
which is another headache for TWRP.
I already have it but again u need to flash whole stock rom again as whole
preloader boot recovery will change.
avi3230 said:
....TWRP is bigger in size and u need to change partition size of recovery.....
....I already have it but again u need to flash whole stock rom again as whole preloader boot recovery will change.
Click to expand...
Click to collapse
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
m0han said:
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
Click to expand...
Click to collapse
As TWRP is larger in size most of the time it wont boot in recovery.
also backing up of recovery wont work on 7mb recovery partition in any cwm based recovery.
So i feel we should stick to philz.
avi3230 said:
.....i feel we should stick to philz.
Click to expand...
Click to collapse
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
m0han said:
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
Click to expand...
Click to collapse
I already have twrp made for device which is easy.
its size is more than 6mb which is the issue.
u can change size of recovery to almost 11mb but then it wont boot in recovery specifically on 6589 chipsets. then whats t use.
to make it boot in recovery we need to change values in preloader.bin which is difficult task.
if anyone working on ubuntu please make an kernel with drivers files from this source.
if using this kernel twrp is less than 6mb then everything will be fine.
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/show....php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI.
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut.
Install instructions:
With fastboot:
Run fastboot
Code:
fasboot flash recovery philz_touch_v6.59.0_Kraft_A6000_J.A.V.img
With flashable zip:
Flash with any Custom Recovery (CWM/TWRP)
Download:
Philz Flashable zip
Philz image
Known Issues:
Internal SD not mount
Contributors
@satgass , @Phil3759
Version Information
Status: Stable
Installed but unable to take stock rom backup
[THEME] [GT-S7500]TWRP Materialised/Dark & AROMA File Manager-TWRP 2.5.0.0 & 2.7.0.0
I am sure currently most of us are using TWRP 2.5.0.0 or 2.7.0.0 and so i would like to share new feature of TWRP Materialised theme, so that we can experience Android - 5.0 Lollipop Materialised design look from our TWRP recovery
Here I would like to share 2 TWRP Materialised theme with 320 x 480 screen resolutions working for both TWRP 2.5.0.0 & 2.7.0.0. Others then that can change different style look in twrp recovery, center clock option, different navbar button layouts, AROMA File Manager & many more setting.
TWRP Materialised/Dark theme installation method:
The theme zips are not flashable. First installation has to be done manually:
1. Download the theme of your choice and rename it to "ui.zip".
2. On SD card (if device has internal and external storage, use the internal) open TWRP folder and create a folder called "theme", without capital letters.
3. Copy ui.zip to theme folder.
4. Restart to recovery.
AROMA File Manager in our TWRP 2.5.0.0 & 2.7.0.0
AROMA File Manager is not part of the theme.
The theme just contains a "shortcut" for directly starting AROMA FM, rather than going through the "install > flash zip" procedure.
1. Download this flashable zip.
2. Flash the zip in recovery.
3.This will copy the Aroma FM package to \TWRP\aromafm.
4. In Materialised settings, tick the option to use Aroma FM.
From the main menu, the theme will now start Aroma FM instead of the TWRP file manager. The file manager will starting, and you are ready to managing your filesystem (copy, cut, delete, make new folder, etc) while you are in recovery
Guys hope you like it & enjoy :fingers-crossed:
bbivan said:
I am sure currently most of us are using TWRP 2.5.0.0 or 2.7.0.0 and so i would like to share new feature of TWRP Materialised theme, so that we can experience Android - 5.0 Lollipop Materialised design look from our TWRP recovery
Here I would like to share 2 TWRP Materialised theme with 320 x 480 screen resolutions working for both TWRP 2.5.0.0 & 2.7.0.0. Others then that can change different style look in twrp recovery, center clock option, different navbar button layouts, AROMA File Manager & many more setting.
TWRP Materialised/Dark theme installation method:
The theme zips are not flashable. First installation has to be done manually:
1. Download the theme of your choice and rename it to "ui.zip".
2. On SD card (if device has internal and external storage, use the internal) open TWRP folder and create a folder called "theme", without capital letters.
3. Copy ui.zip to theme folder.
4. Restart to recovery.
AROMA File Manager in our TWRP 2.5.0.0 & 2.7.0.0
AROMA File Manager is not part of the theme.
The theme just contains a "shortcut" for directly starting AROMA FM, rather than going through the "install > flash zip" procedure.
1. Download this flashable zip.
2. Flash the zip in recovery.
3.This will copy the Aroma FM package to \TWRP\aromafm.
4. In Materialised settings, tick the option to use Aroma FM.
From the main menu, the theme will now start Aroma FM instead of the TWRP file manager. The file manager will starting, and you are ready to managing your filesystem (copy, cut, delete, make new folder, etc) while you are in recovery
Guys hope you like it & enjoy :fingers-crossed:
Click to expand...
Click to collapse
after i restart to recovery !!
what i do in the recoverey ???????
YazanMelhim said:
after i restart to recovery !!
what i do in the recoverey ???????
Click to expand...
Click to collapse
After boot to recovery you can change/use the available feature under theme setting or setting in top of right corner of TWRP recovery
For theme:
-Functional:
tick-use Aroma File Manager, other then that of setting is up to you like use bookmark function or available feature in visual
For setting:
-In TWRP setting you can choose tick-Skip MD5 generation on backup.
-In Time Zone you can choose you country or nearby available., some i was let it default or you can set use 24h clock in
in Options
-Screen setting brightness adjustment, will take effect only after restart recovery. (This feature only workable in TWRP 2.7.0.0)
-Enable Screen timeout, after auto lockscreen you can swipe right to unlock
-Vibration setting available
For aroma file manager
Please select file manager then "swipe to start AromaFM" you can managing your filesystem (copy, cut, delete, make new folder, etc) while you are in recovery just like you are using default file manager come with the rom or third party apps like root explorer file manager and others
What is Aroma file manager ??
Is it compulsory to install custom rom or custom recovery???
Thnks in advance
Sent from my GT-P3100 using XDA Free mobile app
Er. Abhi said:
What is Aroma file manager ??
Is it compulsory to install custom rom or custom recovery???
Thnks in advance
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
Aroma file manager just like custom rom stock file manager of CyanogenMod 10,11 or future 12(android 5.0 lollipop) or others third party apps like Explorer file manager and many more able to download from Google play store. Aroma file manager is to managing your filesystem (copy, cut, delete, make new folder, etc) while you are in "recovery" hope are clear enough for you
Tell me on this!!!!!
So it is compulsory to install ???
Is it use by any recovery like cwm or twrp in recovery mode??
Sent from my GT-P3100 using XDA Free mobile app
Er. Abhi said:
Tell me on this!!!!!
So it is compulsory to install ???
Is it use by any recovery like cwm or twrp in recovery mode??
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
Is not necessary to be install.. aroma file manager is are options..extra feature is only workable in twrp recovery. Please take note my thread is for device galaxy ace plus (gt-s7500) 320 x 480 resolution. Thanks
Screen in Twrp is not fit . I can not rotate/scroll the screen to swipe "zip" file !
Iceman said:
I am sure currently most of us are using TWRP 2.5.0.0 or 2.7.0.0 and so i would like to share new feature of TWRP Materialised theme, so that we can experience Android - 5.0 Lollipop Materialised design look from our TWRP recovery
Here I would like to share 2 TWRP Materialised theme with 320 x 480 screen resolutions working for both TWRP 2.5.0.0 & 2.7.0.0. Others then that can change different style look in twrp recovery, center clock option, different navbar button layouts, AROMA File Manager & many more setting.
TWRP Materialised/Dark theme installation method:
The theme zips are not flashable. First installation has to be done manually:
1. Download the theme of your choice and rename it to "ui.zip".
2. On SD card (if device has internal and external storage, use the internal) open TWRP folder and create a folder called "theme", without capital letters.
3. Copy ui.zip to theme folder.
4. Restart to recovery.
AROMA File Manager in our TWRP 2.5.0.0 & 2.7.0.0
AROMA File Manager is not part of the theme.
The theme just contains a "shortcut" for directly starting AROMA FM, rather than going through the "install > flash zip" procedure.
1. Download this flashable zip.
2. Flash the zip in recovery.
3.This will copy the Aroma FM package to \TWRP\aromafm.
4. In Materialised settings, tick the option to use Aroma FM.
From the main menu, the theme will now start Aroma FM instead of the TWRP file manager. The file manager will starting, and you are ready to managing your filesystem (copy, cut, delete, make new folder, etc) while you are in recovery
Guys hope you like it & enjoy :fingers-crossed:
Click to expand...
Click to collapse
All nice ! But , Screen in Twrp is not fit (ui.zip) , is too big for my phone !.
I can not rotate/scroll the screen to swipe "holofied_aromafm_191.zip" file !
Maybe you can help to put rotate/scroll function on screen , for instal "zip" .
My screen is 320x480 . (Samsung Galaxy Trend Lite GT-S7390 / Cyanogenmod 11 ) .
Or do something with ui.zip .
Thank You , you do nice job . Try to help Me !
TWRP Recovery 2.8.7.0
For Galaxy Ace 3 (gt-s7272)
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
BUGS:
If you have found a bug, please consider posting it here.
CREDITS:
TeamWin: For this awesome open-source recovery.
@zim555 for the device tree.
DALLIE @Bin.g
hit thanks if you liked it.
changelog:
17th august: compiled version 2.8.1.0
8th october : TWRP VERSION 2.8.7.0
Click to expand...
Click to collapse
DOWNLOAD:
https://www.androidfilehost.com/?fid=24052804347830257
INSTALLATION / UPDATING:
-From the above download link, download the twrp zip.
-Put that file at the root of sdcard or extsdcard
-now boot into cwm recovery and flash it.
-Now, normally reboot recovery and enjoy new recovery!
DOWNLOAD:
https://www.androidfilehost.com/?fid=24052804347830257
INSTALLATION / UPDATING:
-From the above download link, download the twrp zip.
-Put that file at the root of sdcard or extsdcard
-now boot into cwm recovery and flash it.
-Now, normally reboot recovery and enjoy new recovery!
THE BUILD IS TESTED AND IS STABLE AND THERE ARE NO BUGS. press thanks.
Main Thread:
http://forum.xda-developers.com/showthread.php?t=2201860
THIS RECOVERY ONLY FOR T26V4.
Introduction:
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM. It is a well proven recovery for many phones! It also adds a full touch interface a completely configurable GUI
Features:
1. Aroma File Manager
2. Full Touch UI
3. On-Screen Navigation Keys:good:
Download:
Philz For Micromax A300 T-26:HERE
Aroma FM: http://forum.xda-developers.com/attachment.php?attachmentid=2231581&d=1378202418
How To Install:
NOTE: Your Phone Must Be Rooted For This Procedure! Please Root Your GOLD Before Installing PhilZ
1. Download PhilZ From Above Link.
2. Copy The Extracted recovery.img To Internal Storage.
3. Download & Install Mobile Uncle Tools From Here
4. Grant Root Access & Tap On Recovery Update.
5. Now Tap On recovery.img Shown There.
6. Tap On Yes.
7. You Have Successfully Installed PhilZ Touch Recovery On Your Canvas Gold
8. Now Extract Aroma FM And Copy All The Contents To Internal Storage/ClockWorkMod Folder
Other ways of doing the same are through Sp Flash Tools,Rashr,Flashify.Etc,
Credits:
1.TheDevilAshish
2.Yuvraj Kohli For Porting
3.Amit Pathak
4.Devrookie
5.Shhsaeed
6.OFC ME.[Akash Khatri]:silly:
Hit THANKS If I HELPED You:good:
Backup and restore option in phiz recovery
Phiz recovery have backup and restore option? Please give 3.3 twrp recovery for Micromax canvas gold
Robins patel said:
Phiz recovery have backup and restore option? Please give 3.3 twrp recovery for Micromax canvas gold
Click to expand...
Click to collapse
Hello you can find the latest twrp recovery by @shhsaeed at www.canvasgoldroms.blogspot.in
Go in the recovery section.