In flashtool, how can i change a kernel. boot.img of the kernel is not detect in select in kernel
Hi there,
Here some tutorials about flashing kernels via flashtool since you don't tell us about what device you are talking about:
[TUT]|Unlocking Bootloaders|Rooting|Flashing Kernels|Unbricking|via Flashtools
How to Flash boot.img / kernel.elf / kernel.sin using flashtool
Good luck
Related
Hi guys,
I wish to install SamHD V2.1 which is recently been released by Kumar Abhishek, but this time he has not integrated the boot.img in the zip itself but just posted the ramdisk to make updated boot.img from boot.img of stock ROM.
I am not too comfortable in using SP Flash Tool as its driver always give me trouble, now my question is:
I have made my own updated boot.img using Android Kitchen now can I just integrate the boot.img in the SamHDv2.zip and flash my device like we use to do it with the older version of the Custom ROMs, is it safe to flash like this?
Secondly, would I be able to boot my device properly after flashing SamHDv2.zip and Gapps.zip (without flashing boot.img with SP Flash Tool)?
I am asking so if it boot properly can I use MobileUncle to flash updated boot.img?
I think if I integrate updated boot.img in the SamHDv2.zip it should work fine after we used to flash in this fashion earlier also but I got to be damn sure before I go ahead.
Please guys guide me I am a newbie.
I am trying to install custom Rom on my xperia u
i have everything which i need to do anything like root unroot CWM RecoverX flashtool
but i don't know how to flash experimental kernal U 12 bcoz in the zip does not contain any .inf or .sin and .elf file only a boot image and nothing is in boot image i also extracted it how i can flash pls tell whole steps the kernal is attached have a look
pls fast i have too install JB in my xperia U
avigeek said:
I am trying to install custom Rom on my xperia u
i have everything which i need to do anything like root unroot CWM RecoverX flashtool
but i don't know how to flash experimental kernal U 12 bcoz in the zip does not contain any .inf or .sin and .elf file only a boot image and nothing is in boot image i also extracted it how i can flash pls tell whole steps the kernal is attached have a look
pls fast i have too install JB in my xperia U
Click to expand...
Click to collapse
boot.img is flashable via fastboot // zip is flashable via custom recovery
Make sure that your rom supports this kernel.
hi all
i downloaded two flash rom : c2105 (l)_15.3.A.1.14_Generic_DE_sony.ftf & C2105_15.3.A.1.17_DE_4.2.2.
and puted in frimwares roms but in flash tools when i want select rom for flash but flash tools dont detect rom why???
what i have to do?? i insltalled last version of flash tools : Flashtool Version 0.9.18.4 built on 12-05-2014 22:00:00 | what i have to do now???
no one know ??? really?? no one???
Are you sure its an ftf and not a zip file? And where *exactly* did you put the ftf files?
Sent from my C2104 using XDA Free mobile app
I recently bought my Xperia Z3 and after a few weeks I installed CM 12.1. Not that I regret it, but I miss the camera features of the stock Xperia ROM. I am new to all thi Sony stuff (coming from an HTC). On my old HTCs I just needed to flash a zip and voila! However, here you need to flash a .tft file and etc. Can someone explain me what to do step-by-step?
install latest flashtool..install required drivers from drivers folder..
download stock ftf file from here->http://forum.xda-developers.com/z3/general/ftf-stock-firmwares-xperia-z3-models-t2886061
place that ftf file in firmwares folder in flashtool..
now open flashtool..click the flash icon and select flash mode..select the ftf..check wipe data,cache
switch off your phone..connect it to your pc by holding the volume down button..your phone will be connected in flashmode then
the firmware will be flashed..and you are done!
ghostzz said:
install latest flashtool..install required drivers from drivers folder..
download stock ftf file from here->http://forum.xda-developers.com/z3/general/ftf-stock-firmwares-xperia-z3-models-t2886061
place that ftf file in firmwares folder in flashtool..
now open flashtool..click the flash icon and select flash mode..select the ftf..check wipe data,cache
switch off your phone..connect it to your pc by holding the volume down button..your phone will be connected in flashmode then
the firmware will be flashed..and you are done!
Click to expand...
Click to collapse
Could you also tell if it's possible to go back to stock ROM from CM 12.1 on NOTE 3 SM-N9005? If yes, how? Please.
Download stock rom and flash tool for ur device and flash stock rom search for flash tool that supports your device
HI Guys!
I installed lollipop cm12.1 because i read about ported camera to my xperia tx, but did not work!!! so i decided flash all (clean flash).... this is mi first time that flashtools showing errors :crying: .... after 1 hour trying to flash stock firmware i found a posible solution...... you need a boot.img with recovery (in my case boot.img of cm12.1)... this file need flash on fastboot... then open recovery and flash a rom.. then flash tools and flash a stock rom and voila!!!!!:laugh:
MI first post!!! i hope it helps
Sorry my bad looking english