Database Info

Pc doesnt recognize my device ?

My laptop doesnt recognize my device. It all happened when i checked an option in development (application option - in settings) with usb connected .... Also tested on another laptop... not working ... is there any solution ??
Charging happens ... but driver installation fails. . .

Dear cldwar,
Same here and i did everything to solve even back to stock but no chance; just charging but usb not recognized... At last i found the below solution by myself... Still i am very confused that what is causing this issue; hardware or software failure?
Solution:
1- Download " Usb Mass Storage Watcher " from market. Install and run then choose " auto mount usb " option and save.
2- In telephone screen, 3845#*920# to enter hidden menu. Go to port setting and set " AP USB " then check retain after reboot and save-reboot
3- After phone reboots, choose mass storage from settings-sd card or applications-development-usb debugging...
4- plugin usbcable and connect phone. Wait a few seconds and then u will see that phone is being recognized by the computer.
5- In phone screen, usb mass storage watcher application may prompt several times so just press save to exit...
6- To disconnect, either disconnect cable directly or deselect mass storage mode or usb debugging... Phone may be unstable temporary while disconnecting usb...
Hope all these helps...
Kind regards,
Sent from my LG-P920 using XDA App

You have the drivers on the phone itself, on the LGE folder.

omgomg said:
You have the drivers on the phone itself, on the LGE folder.
Click to expand...
Click to collapse
Dear omgomg,
I dont think that it is driver related since the solution i described above is the only way i found to overcome this issue temporary...
Kind Regards,

Problem solved . ..
just installed LG software update pc suite --- installed the drivers and the phone is back to normal ....
Thanks for the help ..... and ideas . . ..

Awesome!
Thanks for starting this thread had a similar issue.
I had the same thing after my phone was Rooted. It then just topped using the stock drivers.
Oh Well Thanks guys!

[Q] 'mtp initialization' without connect to the computer

I didn't connect to the computer but 'mtp initialization' or 'mtp connected' are occurred all the time. Also, my phone is 'charging' when i didn't connect to the computer. Why it occurs? What should I do now?

Сlean the usb slot. Dust can contact closes

4eLLka said:
Сlean the usb slot. Dust can contact closes
Click to expand...
Click to collapse
I have just cleaned with some alcohol but it still occurs.

Seems like u have hardware related issue, I would suggest to get it checked by SSC.
But before u give ur phone, make sure u have stock rom with stock unrooted kernel. U dnt have cwm recovery and ur download counter must be 0.
Sent from my GT-I9103 using Tapatalk 2

jordan1116 said:
I have just cleaned with some alcohol but it still occurs.
Click to expand...
Click to collapse
maybe the problem is deeper
look for the Samsung service and ask them to help

Guys is this serious issue,
3 days ago, when i connected charger it also said MTP initialization
but i have not experienced that again....

Make a clean flash. I started having that issue too, phone wouldn't charge with charger, only trough usb to pc. It didn't even recognize it was plugged in. All stopped after I flashed ZSLE6

@OP
does restarting ur phone help...?
Sent from my GT-I9103

jordan1116 said:
I didn't connect to the computer but 'mtp initialization' or 'mtp connected' are occurred all the time. Also, my phone is 'charging' when i didn't connect to the computer. Why it occurs? What should I do now?
Click to expand...
Click to collapse
hmm..same error was in my GALAXY 3 when I installed custom ROM. Try to re-installed the ROM if you haven't then do factory reset. if did already, contact directly to SSC..:cyclops:

MTP Initialization issue
Hi All,
I'm new to use Galaxy R the same model. I don't know the issue i'm facing is directly related to MTP Initializer or not but the issue i'm facing is I'm not able to access the subdirectory and file system of my phone in PC. At initial When I connect my mobile to PC I was able to access the files and at that time MTP initializer message never appeared as notification but from few days ago whenever i connect my mobile to PC i'm getting notification of MTP initializer to my mobile and I'm not able to access subdirectories and files(music, video, photo) present in mobile although the root folders are appearing.
I thought this might be an MTP issue so posting this in this thread. Please help me how can I access(Copy/past/delete to/from PC) my all files.

firstSmartPhoneUser,
Try to access your files using USB mass storage. Go to Settings-Wireless and network-USB utilities, and click "Connect storage to PC" button. Then connect USB cable and tap "Connect USB storage". If that doesn't help, you can try to connect wirelessly with "Kies air" app, or something else, like MyPhoneExplorer (this app needs to be installed both on the phone and on PC).

nRoof said:
firstSmartPhoneUser,
Try to access your files using USB mass storage. Go to Settings-Wireless and network-USB utilities, and click "Connect storage to PC" button. Then connect USB cable and tap "Connect USB storage". If that doesn't help, you can try to connect wirelessly with "Kies air" app, or something else, like MyPhoneExplorer (this app needs to be installed both on the phone and on PC).
Click to expand...
Click to collapse
this will work !! :good:

[Q] phone not recognized as storage when connected to laptop

HI all, I seem to have a problem getting my laptop (ubuntu 12.04) to recognize my phone as storage when connected via USB. Here's what happened. I have already enabled USB debugging and USB debugging notify. When I plugged the phone to my laptop I got the usual message on the screen of my phone an when I clicked on it there were 2 tick boxes: one to recognize the phone as camera (that by the way worked) and the other one that recognized the phone as storage: when ticked nothing happened on my laptop, so I unticked both and now that bloody message is not coming up anymore on my phone, I only got one which says "USB debugging connected". ANy idea?
thanks

Disable the USB debugging... It's not needed for storage connection.
Sent from my One using XDA Premium 4 mobile app

HI thanks, ok fair enough but somehow I seem to have messed up with it and I would like to fix it if I can: I can't get the usb debugging mode message up when I connect the phone and the laptop doesn't recognize it as storage, not only ubuntu but even windows! could it be a matter of drivers? If so where can I get them from?
thanks

Menu>Storage>*menu on the upper right corner*>USB computer connection>*check box MTP/PTP*

happygolucky919 said:
Menu>Storage>*menu on the upper right corner*>USB computer connection>*check box MTP/PTP*
Click to expand...
Click to collapse
Thanks. When I connect the device as PTP it gets connected but when I do it as MTP , computer shows the error that drivers are not installed.

I'm having a similar problem on my phone, there is no option to change USB computer connection, so phone not regonised when plugged into PC? Any ideas?

MTP is a proprietary and modern protocol, older or open source OS's will not support it out of the box. You will need the relevant drivers, not sure how to do it on older version of Ubuntu, may be worth looking in their forums (support is included in new version in the proprietary driver bundle). There are no drivers for Windows XP, but you can get them for Windows 7, I'll dig out the guide I have bookmarked somewhere.

IIIIkoolaidIIII said:
MTP is a proprietary and modern protocol, older or open source OS's will not support it out of the box. You will need the relevant drivers, not sure how to do it on older version of Ubuntu, may be worth looking in their forums (support is included in new version in the proprietary driver bundle). There are no drivers for Windows XP, but you can get them for Windows 7, I'll dig out the guide I have bookmarked somewhere.
Click to expand...
Click to collapse
Thanks. That would be of great help.

Dush123 said:
Thanks. That would be of great help.
Click to expand...
Click to collapse
Here are the three guides I have bookmarked relating to MTP, I think the first from Tom's Hardware should fix (download is in 3rd post).
http://www.tomshardware.co.uk/forum/50119-63-devices-working
http://forum.xda-developers.com/showthread.php?t=2390296
http://forum.xda-developers.com/showthread.php?t=2391236
Hope these help.
B
---------- Post added at 09:22 AM ---------- Previous post was at 09:21 AM ----------
Oh yeah the other thing I didn't mention is MTP honors your phones security, so if you have a secure lock it won't show up initially until screen is on and device is unlocked.

Same issue, no options under USB computer connection !
boringfrog said:
I'm having a similar problem on my phone, there is no option to change USB computer connection, so phone not regonised when plugged into PC? Any ideas?
Click to expand...
Click to collapse
Hi, boringfrog,
were you able to get the issue resolved ?
After the phone upgraded from 12.0-YNG1TAS17L to 12.0-YNG1TAS2I3, i am seeing the similar issue, my phone will only charge on a Laptop, i tried different cables, 2 laptops, uninstalled and re-installed drivers, nothing works, i did a dirty flash back to 12.0-YNG1TAS17L the issue still exists, i tried enabling and disabling ADB debugging etc...
Under storage options , under the three dots on the right i see the USB computer connection, upon hitting it , nothing happens, the storage page just refreshes... no options to mount as MTP....
Please help need to copy the data from phone to PC...

mkhanemkay said:
Hi, boringfrog,
were you able to get the issue resolved ?
After the phone upgraded from 12.0-YNG1TAS17L to 12.0-YNG1TAS2I3, i am seeing the similar issue, my phone will only charge on a Laptop, i tried different cables, 2 laptops, uninstalled and re-installed drivers, nothing works, i did a dirty flash back to 12.0-YNG1TAS17L the issue still exists, i tried enabling and disabling ADB debugging etc...
Under storage options , under the three dots on the right i see the USB computer connection, upon hitting it , nothing happens, the storage page just refreshes... no options to mount as MTP....
Please help need to copy the data from phone to PC...
Click to expand...
Click to collapse
Sorry it was a friends phone so I just returned it to him after try a few attempts. Can you not put your data into the cloud then you can access it on your PC? Good luck.

PC not recognizing OnePlus 2 after update to Oxigen 3.0.1
What seems to solve the problem is to pull down the notifications bar, which shows one notification which gives you multiple options for the USB. Please choose the file download option(usually the second option). Your OPT will show up on the PC.
Thanks and regards to all.

Can't access on pc

Hi i can't access my files on my pc (it is unlocked) not even sync for music
also it appears as a audio device in devices and drives

Have you set USB settings to MTP? Otherwise this might help: http://www.howtogeek.com/195607/how...evice-to-show-up-in-file-explorer-if-it-isnt/

The correct drivers are installed? Tried with different USB cables? Tried all USB ports on the computer?

audit13 said:
The correct drivers are installed? Tried with different USB cables? Tried all USB ports on the computer?
Click to expand...
Click to collapse
yes to all :/

The phone used to work with the same computer and USB cable?

If ur rooted install multirom and install cm13 as secondary os.. then connect to ur pc while ur in cm13 it will detect the driver after that unstall cm 13 and connect as u do normally
like if worked

hey i found away around it thx though!

How did you fix the problem?

"hey i found away around it thx though!"
But why in the name of all that's holy would you ask the question and then not share the answer for others who regularly have the same problem? Keeping info to yourself is the best way of maintaining your "zero thanks" status...

oh sorry for not sharing what i did to solve the problem! here is what i did!
1. connect phone to pc
2. unlock
3. swipe down and touch the notification that says "usb for charging touch for more options"
4. select the option you want
easy

DOOGEE Y300 USB Drivers/Windows 10

I cannot connect my DOOGEE Y300 to my Windows 10 PC as USB storage. The PC makes the usual sound when making a USB connection but the phone does not appear in Windows Explorer. The phone appears as "phone" in "Devices and Printers" but I have not been able to enable it. Has anyone else had this problem (and fixed it).

bobw1943 said:
I cannot connect my DOOGEE Y300 to my Windows 10 PC as USB storage. The PC makes the usual sound when making a USB connection but the phone does not appear in Windows Explorer. The phone appears as "phone" in "Devices and Printers" but I have not been able to enable it. Has anyone else had this problem (and fixed it).
Click to expand...
Click to collapse
There should be a notification on the device when you connect it, pull that notification down and it might say its connected to device for charging, tap that notification and see if it pops another menu up with more options, select MTP for file transfer.

Droidriven said:
There should be a notification on the device when you connect it, pull that notification down and it might say its connected to device for charging, tap that notification and see if it pops another menu up with more options, select MTP for file transfer.
Click to expand...
Click to collapse
Hi I am a new member. I am also having the same problem with windows 10 and my y300. I have tried your solution but this still does not work. Has anyone had any success getting this working? Thank you.

sheffcitylad said:
Hi I am a new member. I am also having the same problem with windows 10 and my y300. I have tried your solution but this still does not work. Has anyone had any success getting this working? Thank you.
Click to expand...
Click to collapse
Do you have the USB drivers for your device installed? The drivers that auto install when you connect to PC are not always enough. There should be drivers for your device brand that can be downloaded and installed manually.
Is your device recognized in device manager?
Sent from my SCH-I535 using Tapatalk