have a lg p760 mobile phone with a problem.... it woun`t turn on.....i followed your guide but still nothing. last night i noticed a tiny spark on the bottom of the phone, near the charging port...could you give me a advice on how to repair this phone??
when i connect it to the pc it makes that sound of driver connecting and disconnecting...it stais connect about 2-3 seconds.
the tiny spark apears when i try to turn on the phone for the first time or when i am tryng to connect it to the pc.
i disassembled the phone piece by piece and thats is why i saw the tiny spark.
i am sorry for my english.
thank you.
Hi there,
It sounds like a very hardware related problem, for it to be fixed you would need to really know what you were doing or send it to LG for repair.
Having said that, it'd be worth asking in the LG P760 Q&A to see what others with the device think and they may be able to advise you further!
re
matt4321 said:
Hi there,
It sounds like a very hardware related problem, for it to be fixed you would need to really know what you were doing or send it to LG for repair.
Having said that, it'd be worth asking in the LG P760 Q&A to see what others with the device think and they may be able to advise you further!
Click to expand...
Click to collapse
i have tried everything.....i allready have a post and still no answer
danro28 said:
i have tried everything.....i allready have a post and still no answer
Click to expand...
Click to collapse
If you have tried everything, and posted there, I would wait a bit longer and see what happens.
Other than that, there is not much you can do I'm afraid.
Related
Last night I switched my SD card (16GB Class10 Kingston) in my O3D and checked the "Use external/internal sd" in CM settings and rebooted my phone.
The /root/sdcard path was located to the INTERNAL sdcard before the switch.
I think that the option was NOT checked BUT when it check it, it became "Use internal" which is incorrect.
Anyway, my phone wont boot, not even when holding down VolUp+Power.
I will keep trying but just a warning to you all, don't do any hardware change with the Nightly builds (assuming that the sdcard is hardware)!
I'm using linux so I'm not sure that it's possible to use any software like the softwares on windows.
have a look at this thread http://forum.xda-developers.com/showthread.php?t=1433274 , they have the same problem as you. Apparently its because you switched the internal/external.
Flash the rom again ??? Power + vol-down 3d button .. for cwm ??
Sent from my LG-P920 using XDA App
It's very important you report this bug to arcee on http://rootzwiki.com/topic/4883-cyanogenmod-cm7-nightlies-for-optimus3d-and-thrill/
He doesn't follow threads on XDA.
gamesz2 said:
Flash the rom again ??? Power + vol-down 3d button .. for cwm ??
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
Are you seriously answering my thread without reading my entire post?
--------------------------
No worries, I can flash back the stock with lg support tool using windows, but my current rom and settings will be lost.
Just a heads up if any of you would try the same thing.
And mine doesn't go in to recovery mode either. I doesn't boot whatever I try.
Only thing that can be done is what I said above, Holding down VolUp+Power while plugging in the usb in the computer so the computer can find my phone as a Omap4430 device.
KurdX said:
Are you seriously answering my thread without reading my entire post?
--------------------------
No worries, I can flash back the stock with lg support tool using windows, but my current rom and settings will be lost.
Just a heads up if any of you would try the same thing.
And mine doesn't go in to recovery mode either. I doesn't boot whatever I try.
Only thing that can be done is what I said above, Holding down VolUp+Power while plugging in the usb in the computer so the computer can find my phone as a Omap4430 device.
Click to expand...
Click to collapse
Ow iam sorry man i read it wrong iam from holland :0
Sorry
Sent from my LG-P920 using XDA App
Hi guys,
Same problem to me... A dead phone w/e I do. Won't get my PC recognise it as OMAP4430 device (not running XP, but 7)...
Any ideas? Cannot easily get my hands on an XP PC...
lrpvo said:
Hi guys,
Same problem to me... A dead phone w/e I do. Won't get my PC recognise it as OMAP4430 device (not running XP, but 7)...
Any ideas? Cannot easily get my hands on an XP PC...
Click to expand...
Click to collapse
You don't need XP, will work on 7 aswell.
Haven't had time to fix my phone yet but I will fix it through 7 so I can post the result here when fixed.
same problem here, too.
any solutions yet?
omgomg said:
It's very important you report this bug to arcee on http://rootzwiki.com/topic/4883-cyanogenmod-cm7-nightlies-for-optimus3d-and-thrill/
He doesn't follow threads on XDA.
Click to expand...
Click to collapse
I already did that many days ago, but it seems this rootzwiki forum is totally dead. No arcee, no other dev replies. I also reported other bugs, no answer too.
In fact, I´m afraid CM7 development for our device has stopped completely, since all changelog entries we get are for general CM7. Nothing is getting done for the O3D specifically.
I know CM is done by busy developers, who get no money for their work, but they could at least share their knowledge a little more, so more people could jump in to help! I´m trying to do that, but I need some pointers from more experienced people.
What pisses me off is to have an important project like this in the hands of 1 or 2 guys, with bugs that bricks expensive phones, and we have no one to talk to.
Marcovecchio said:
I already did that many days ago, but it seems this rootzwiki forum is totally dead. No arcee, no other dev replies. I also reported other bugs, no answer too.
In fact, I´m afraid CM7 development for our device has stopped completely, since all changelog entries we get are for general CM7. Nothing is getting done for the O3D specifically.
I know CM is done by busy developers, who get no money for their work, but they could at least share their knowledge a little more, so more people could jump in to help! I´m trying to do that, but I need some pointers from more experienced people.
What pisses me off is to have an important project like this in the hands of 1 or 2 guys, with bugs that bricks expensive phones, and we have no one to talk to.
Click to expand...
Click to collapse
My point exactly all these people are getting big headed if they opened it up people can fix stuff and get it done much quicker but i guess they get money for it.. I'm going to have to let go of this phone shame was a good phone though..
I had almost same thing I formatted my ad card on cm7 38 build for p925g. Total brick it's in a disconnect reconnect loop and no comm conection so very. Close to a full brick taking it in tomarow.
Posted from my crap ass slow as f*** 3GS iphone
Phone in unusable state.
Same issue here coming from CM7 build 16. All I see is the disappearing/reappearing OMAP4430 device in device manager.
THIS PROBLEM SHOULD BE STICKIED]
Any idea what to do guys??
Yes it should i was lucky my phone was under the 30 days still so they just handed me a new phone on the spot wich was nice but im going to stay away from cm7 like the plague yes this should be sticked her andin the thrill forum as well.
I had to take mine in there was no way to get the computer to see the phone to flash it.
Guys, don't complain about this here, as arcee already said he doesn't follow XDA threads.
Do report it at http://rootzwiki.com/topic/4883-cyanogenmod-cm7-nightlies-for-optimus3d-and-thrill/ where he reads it.
omgomg said:
Guys, don't complain about this here, as arcee already said he doesn't follow XDA threads.
Do report it at http://rootzwiki.com/topic/4883-cyanogenmod-cm7-nightlies-for-optimus3d-and-thrill/ where he reads it.
Click to expand...
Click to collapse
Indeed, he says he reads it, but that forum is completely DEAD, no posts for 2 weeks. I already reported this bug, had not a single answer. And the nightlies have no P920 specific work for weeks. And since arcee seems to be the only mega-master-guru around, a person no one can talk to, this is what we have: a dangerous half-working CM7 that will destroy many more O3D around, and there´s nothing we can do.
omgomg said:
Guys, don't complain about this here, as arcee already said he doesn't follow XDA threads.
Do report it at http://rootzwiki.com/topic/4883-cyanogenmod-cm7-nightlies-for-optimus3d-and-thrill/ where he reads it.
Click to expand...
Click to collapse
Im. Just posting hear so every one else. Dosent make the same misstake as me and end up with a paper weight on tbere desk.
Hey, today I accidently hardbricked my 3D(yeah accidently, cause I messed up Phones). Now I have to send it to service. Anybody else had to do the same? Did LG always repair or change your Phone? Just asking cause I want to know if sending it to service makes sense. Honestly, I think it wouldn't be easy even for LG to make the Phone working again.
Not so bad
it's hard to say forsure, but if you were a tech and were judged on how many phones you fixed per hour, would you spend a lot of time figuring out whether the owner bricked it by being stupid or just try to fix it?
I mean a smashed screen is easy to spot and say "not our fault" but digitally that's not so easy.
Secondly, they have access to tools that you don't. I'm sure they have test-beds and internal connections that allow them to restore firmwares easier, or for that matter, replace main boards.
...but I don't know, I don't have direct experience with LG.
Yeah that's what I also think. I'm sure they have access to programs to which I do not, but that's exactly the strange thing. I read that many users with a hardbricked Optimus 3D got a new main board or a new Phone. So if they are able to restore the firmware, why would they change the hardware? The only answer I can give myself is that they don't really care about whose fault it really is and because of that they don't check.
GentlyCriminal said:
Yeah that's what I also think. I'm sure they have access to programs to which I do not, but that's exactly the strange thing. I read that many users with a hardbricked Optimus 3D got a new main board or a new Phone. So if they are able to restore the firmware, why would they change the hardware? The only answer I can give myself is that they don't really care about whose fault it really is and because of that they don't check.
Click to expand...
Click to collapse
Hey brate,
Why don't you take a chance? You have a paperweight anyway. Try, if it works, bingo. If it doesn't, you still have your paperweight. Don't waste another minute and send it for repair.
Zdravo from Vienna
f.
Zdravo kollegah
I already sent it to LG, I'm sure it will work. I just asked because I was thinking all the time about changing phone. But I think they won't even check
aii pozdrav iz salzcburga
Greetings all! I have been a Lg optimus user for some time, being that it is my first official android phone. Sadly it was bricked and is just a very expensive paper weight now. Due to the fact that armv6 processors are becoming outdated i was considering geting a new phone, preferably an HD one, but I digress. My main problem is that I would like my LG to at least function, but I live in the Caribbean and it is out of reach of an offcial LG repair center. I very well know that it may be a lost cause but is there any advive that others can give from past experience that can help me with my present conundrum? You are well come to flame at me for this possibly inept question, as long as I can get help and move on in the mean while untill my new phone....I love the Optimus one and even so would like to have i as my little past time.:highfive:
wm526 said:
Greetings all! I have been a Lg optimus user for some time, being that it is my first official android phone. Sadly it was bricked and is just a very expensive paper weight now. Due to the fact that armv6 processors are becoming outdated i was considering geting a new phone, preferably an HD one, but I digress. My main problem is that I would like my LG to at least function, but I live in the Caribbean and it is out of reach of an offcial LG repair center. I very well know that it may be a lost cause but is there any advive that others can give from past experience that can help me with my present conundrum? You are well come to flame at me for this possibly inept question, as long as I can get help and move on in the mean while untill my new phone....I love the Optimus one and even so would like to have i as my little past time.:highfive:
Click to expand...
Click to collapse
Does it turn on at all? If you pop the battery out, put it back in and hold Volume UP+Back+Power does it get to Emergency Mode at all? If it does you might be able to recover by flashing the original/stock firmware, follow this post here:
http://forum.xda-developers.com/showthread.php?t=883314
Skellums said:
Does it turn on at all? If you pop the battery out, put it back in and hold Volume UP+Back+Power does it get to Emergency Mode at all? If it does you might be able to recover by flashing the original/stock firmware, follow this post here:
http://forum.xda-developers.com/showthread.php?t=883314
Click to expand...
Click to collapse
I've tried that a few times but to no avail... :crying:
I've held down every single button, squeezed every single part, and even shaked it a bit since some people say that it some times works. The phone is very fresh, a few months old and I haven't even taken off the screen protector yet...
I've even tried putting it to charge for some time, pressing some of the puttons while plugging in the charger or USB cable. I don't know if i can have it shipped back to the US to be fixed or otherwise.
Thanks for the input...:highfive:
wm526 said:
I've tried that a few times but to no avail... :crying:
I've held down every single button, squeezed every single part, and even shaked it a bit since some people say that it some times works. The phone is very fresh, a few months old and I haven't even taken off the screen protector yet...
I've even tried putting it to charge for some time, pressing some of the puttons while plugging in the charger or USB cable. I don't know if i can have it shipped back to the US to be fixed or otherwise.
Thanks for the input...:highfive:
Click to expand...
Click to collapse
Well if the phone isn't turning on at all then you wont be able to flash the stock rom. I guess you havent tried flashing a new baseband or rom. You might have to go ahead and send it for fixing since it is under warranty.
How many days do you have phone bricked??? Just asking because you could have a empty battery and thats why combo its not working its a long shot i now but sometimes happy things appen...
Best of luck
Sent from my LG-P500 using xda premium
just xplain man...
u r jus telling that the fone is brickd...why don't u share the condition of the fone now...nd just xplain wht u did with it bfore getting it brickd...
ajaihs said:
u r jus telling that the fone is brickd...why don't u share the condition of the fone now...nd just xplain wht u did with it bfore getting it brickd...
Click to expand...
Click to collapse
All I think I have to say about that is ...KDZ updater...During the update I got an error repeatedly so I unplug and plug it in again but it didn't work so I (this is the part that I regret the most) I just unplugged the battery and tried to do it again, and thats how I ended up like this...the point is I know it's bricked I just wanted to know if I could have it fixed without being in the USA.
Try this method http://forum.xda-developers.com/showthread.php?t=1324105 :fingers-crossed:
Okay so I've been looking for a LONG TIME trying to find a solution to this problem, but have yet to find one, so if this thread is a duplicate issue, please move it to where it needs to be.
I have a Metro PCS Kyocera Hydro XTRM. I rooted the phone and it was fine. I will be the first one to tell you i am a major newbie when it comes to smartphone tweaking. I have been playing with electronics for years, and can pretty much build a desktop computer but newbie when it comes to android devices. So upon suggestion from a dev, I downloaded an app from the play store "BootUnlocker."
As Soon as I rebooted my phone, BAM! It gets stuck on the METRO PCS screen and stays there. I have pretty much tried everything I can think of. I have removed the battery a billion times and tried to hard reset the phone numerous times as well. And now, it won't even turn on but the LED power light on the front flashes when it's plugged in. I was thinking of trying Odin but when I plug the phone into the computer's USB port....it does absolutely nothing...doesn't read a thing.
I am hoping someone will be able to help with this soon as I would really like to know how to go about recovery on a phone that is completely Hard Bricked (as mine is now). If anyone has any suggestions, or has recovered a hard bricked xtrm, I would be so very thankful for your input.
Hi there! I'm afraid XDA doesn't have any information on that device that I can find. So....you can ask in our general Q&A section. I will ask a moderator to move your post there.
This is where it will go....
http://forum.xda-developers.com/general/help?nocache=1&z=581026349682360
The only other suggestion I can give is to try searching the web for info on your device.
Hope you get it worked out!
never mind
Hello,
I've been trying to fix this from September but with no success..
the device is not seen via USB, so I can't really do much.
ADB doesn't see it and nothing much else I can do.
I am getting quite stuck in this and I am wondering if there's anybody on the forum who lives in Lincolnshire UK and who would be able to repair it? or know of somewhere I could send the tablet to be repaired (Asus UK charges too much for this and it's not worth the cost)
thanks
Can you still reach the bootloader power on + vol down?
Sent from my XT1572 using Tapatalk
hiya,
no nothing, just stuck in boot (ASUS logo)
can't power it off
can't get into menus/recovery
can't reset with pin in reset button..
it just stays on and nothing else..
thanks
unlocated said:
hiya,
no nothing, just stuck in boot (ASUS logo)
can't power it off
can't get into menus/recovery
can't reset with pin in reset button..
it just stays on and nothing else..
thanks
Click to expand...
Click to collapse
If there is no possibility to access your device you should think about to exchange your main board. This is the only chance to get the problem solved. I had the same situation 2 years ago.
Exchanging the main board takes a few hours and needs patience and fine mechanic skills. Otherwise you go to a work shop or ask a handicraft enthusiast.
You will find the right main board in the US like here: http://www.ebay.com/itm/ASUS-MOTHER...8b40f09&pid=100005&rk=2&rkt=3&sd=401081006002. Maybe you will find one in your home country.
I think TF300T is too valuable to throw it away because of that case.
hi, thanks for this.
I think I've found the right forum thread to help
http://forum.xda-developers.com/showthread.php?t=2368372
thanks.. I'll see whether I can do this.
unlocated said:
hi, thanks for this.
I think I've found the right forum thread to help
http://forum.xda-developers.com/showthread.php?t=2368372
thanks.. I'll see whether I can do this.
Click to expand...
Click to collapse
You are a happy one. You found the instruction by Huebinger in English. It's the same I did follow to exchange my main board. You may trust it step by step. I know him personally.
Good luck!