Related
When i tryed to flash new ROM into my 6700 it was stop flashing at 99% of ROM loading and get an error at PC.
After device reboot i can see my device as a Unkown device in the USB devices section but it dead and show nothing at the screen.
HR not work, Bootloader mode not work....
Please help me if you can
P.S. I`m tryed to find answer for my question by forum search but no result.... if i made a similiar topic to more created, please get me link to read about the same problem.
Please PM to me if you know answer for repair my device - i`ll send some money for really good idea by PalPal
listen friend ur device can work again. i have a friend in india o2 service centre and he can get ur set back to life. actually what they do is they flash the rom directly into ur rom with the help of 3 special cables. so u have 2 options. either u send ur mobile to me with the courier charges or i send u the software in a dvd and all the 3 cables with all instructions. just let me know what ever u decide and mail me at [email protected]
Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !
you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry
thx , I will tell a mod to move my thread :'(
Have you tried using the Sensation unbrick thread?
try unbricking project or ask in juopunutbear's thread
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...
seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally
I had 99% charge !
seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used
Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...
Any help guys ?!?!
seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man
seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors
hi people , i hope somebody will see this tread and hop it someone can help me
I have a Allwinner a13 tablet ( picture atached ) , but yesterday when i turned it off i leave it , and today when i tryed to turn it on IT JUST WONT START , tryed to charge ( with power adapter , with USB ) but still nothing happening . Does somebody know what is the problem and maybe somebody help with this sh** :/
Thanks in advance !
milance92 said:
hi people , i hope somebody will see this tread and hop it someone can help me
I have a Allwinner a13 tablet ( picture atached ) , but yesterday when i turned it off i leave it , and today when i tryed to turn it on IT JUST WONT START , tryed to charge ( with power adapter , with USB ) but still nothing happening . Does somebody know what is the problem and maybe somebody help with this sh** :/
Thanks in advance !
Click to expand...
Click to collapse
This was a while ago but do you still have the problem?
baek_doo_san said:
This was a while ago but do you still have the problem?
Click to expand...
Click to collapse
My Tablet is also....
Update with new factory firmware and bricked.... The firmware procedure ended with "OK !", tablet automatically go reboot and nothing (with LOGO-screen)....
???????
I don't understand....
All software was original factory....
A13 tablet
photosam said:
My Tablet is also....
Update with new factory firmware and bricked.... The firmware procedure ended with "OK !", tablet automatically go reboot and nothing (with LOGO-screen)....
???????
I don't understand....
All software was original factory....
Click to expand...
Click to collapse
Try downloading one of the root tools like srsroot which will let you boot into debug mode. That should restore your boot structure. Have you already tried this?
Hi friends !
Encountred WhiteScreen Erros while Rooting your s7262 ??
Dont WOrry ! We have SImple and Working Solution for you
AIM : fixing WhiteScreen Errors on s7262
Things we will need:
(attached at the end of post)
file 1: whitefixS7262.rar location : PC
file 2 : ODIN307.zip Location : PC
**Make sure you have USB drivers installed**
Instructions:
STEP 1 :
a:Put Your phone in download Mode by pressing Volume Down +Home+Power key simultaneously.
b: Press Volume UP when Warning screen appears
STEP 2:
a: Extract ODIN307.ZIP and Run Odin 307.exe as Administrator (by right click > Run As> Administrator)
b: Extract whitefixS7262.rar you will get file BOOTSPL_S7262XXUAMJ3.tar
c: Connect Phone with PC
d:Click on PDA select[COLOR="SeaGreen)"] BOOTSPL_S7262XXUAMJ3.tar [/COLOR]
e: Click START !!
f: You will see message PASS !!
Your Phone WIll Be Rebooted Automatically and whitescreen error will not be occured
for latest and tested tutorial on How to Root Samsung star pro duos s7262 Go to : Rooting Guide for Samsung Star pro duos s7262
Press Thanx if i helped you
If you encountered any problem , Reply Here with full error message
S7262 Totally black screen.Internal sound after one of the two files in the zip .
Remove the fist file.After BOOTSPL_S7262XXUAMJ3.tar, still white screen when trying recovery.
After going stock, everything ok but "e:missing bitmap icon_att_fota_installing" when in recovery.
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
S7262 bricked
This is Bogus. Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
zeetherocker said:
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
Click to expand...
Click to collapse
please help me if you fixed the problem, I too followed the tutorial and my phone is dead, I cant even enter into download mode
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
I just flashed your file, Now I get a white screen on all modes, I cant even enter into download mode after flashing the file given you, please help me
Chandradev said:
please help me if you fixed the problem, I too followed the tutorial and my phone is dead, I cant even enter into download mode
---------- Post added at 05:07 AM ---------- Previous post was at 05:05 AM ----------
I just flashed your file, Now I get a white screen on all modes, I cant even enter into download mode after flashing the file given you, please help me
Click to expand...
Click to collapse
I did fix it. It was a long time back and I don't remember all that well. But from what I can recall, the phone is actually functional only the display does blank. So imagine that your display is broken and try to boot into download mode. once you are confident enough that you are in the download mode press vol up and then it should show up on Odin. after this point you just need to flash the stock files. I know I'm late in replying but if you still have the problem, this should help
---------- Post added at 10:19 PM ---------- Previous post was at 10:12 PM ----------
jai2061 said:
This is Bogus. Help me. First I flashed BOOTSPL_S7262XXUAMJ3 as mentioned, then lot of grey lines started coming on the screen instead of Samsung pro GT S 7262. Then I used odin and flashed the other file which came out of whitefixS7262.rar that is BOOTSPL_S7262JVUANB2.tar. After flashing the second file, my phone just bricked. None of the buttons are working now, neither the phone is getting booted, nor I can go to download mode or any mode. PLEASE HELP AS MY PHONE IS BRICKED AFTER DOING THIS.
Click to expand...
Click to collapse
check my post below
this file is really working
thanks
zeetherocker said:
WTF !!! I flashed the tar file and the phone just died.. This is no fix, please do not use these files...
Click to expand...
Click to collapse
Thish is WORK!!!!!!!!!!!!!!
Flashing ***AMJ3 & wipe Factory reset after wipe Cash Partition
Hello everyone I'm new to Androids world.My curiosity to customize my stock android landed me in XDA site.I have flashed a cwm recovery in my Samsung GT s 7262 recently but I ended up in white light screen on my recovery.After continous searching for solution I reached a YouTube video of LogansDroid video (link updated) How to fix white screen in Samsung Galaxy star dated Nov 21, 2016) about fixing white screen.In description of video link is provided for cwm recovery to fix white screen yesterday I flashed the zip using Odin 3 & to my surprise I was able to get cwm recovery instead of white screen.Guys give a try u may also be able to fix ur device problem. Don't blame me for anything that happens to ur device.If u r ready to risk u may also gain solution to ur problem.Guys sorry for not able to attach the recovery tar file in that link that's y I have clearly written the videos title so that u can find it easily.I tried to attach the file but it says this cannot be done.Happy Flashing.
don`t work
give life to ur dead phone
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Help
subratmunnu said:
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Click to expand...
Click to collapse
BRO i have same problem please help me.
[email protected] said:
BRO i have same problem please help me.
Click to expand...
Click to collapse
Pls pls give me the solution i need ur help
subratmunnu said:
i too used this in odin but my mobile got dead
very bad people do post these type of wrong files. if u dont know then please dont post anything in this forum rather u sit calm.
after flashing i got white screen and it is not going to nor recovery mode nor download mode.
even it doesnt power up with samsung logo.
atlast i tried to do with usb dongle jig but failed . i didnt got any help from that jig. money wasted
but atlast i gave life to my samsung gts7262 without using any mechanical steps lyk using Riff box jtag.
i done it with my computer and with odin.
soo if u wanna know how to gv life to ur dead phone then reply to my message i may help you.
Click to expand...
Click to collapse
can u help me with dead phone , this son of b***** posted wrong files and phone got dead,
انا اعلم ان ذلك الحل متاخرا جدا لكننى قمت بنفس الشىء الان ولقد ظهرت الشاشة البيضاء فجربت الملف التانى اختفت الشاشة البيضاء واصبحت الشاشة سوداء
والحل كالتالى
1- اولاقم بتنزيل السوفت وير الاصلى للهاتف
2- تاكد من شحن الهاتف ضعه فقط ع الشاحن واتركه حتى لو نصف ساعة
3-قم بنزع البطارية
4- اضغط ع مفتاح الطاقة+ ومفتاح خفض الصوت+ ومفتاح الرئيسية
5- اضغط مرة اخرى على مفتاح خفض الصوت
6- افتح برنامج اودين كمسئول ثم تاكد من اتصال الهاتف بجهازك الكمبيوتر
7-ضع الروم فى المكان المخصص له pda
8- قم بالضغط على كلمة ابدء
9-انتظر حتى يتم الاكتمال وسوف يعمل الهاتف بشكل طبيعى
اعتذر عن ضعفى فى اللغة الانجليزية يمكنكم الترجمة وسوف اترجم لكم ولكن ببعض الاخطاء اللغوية
i will translate it and i`m sorry because i`m not good in english
to solve this problem
1- download the stock room
2-unplug the battery
3- plug battery and press power+volume down+home buttom
4- press volume down and plug the data cable
5-run odin and put the stock room in pda
6-press start and wait to finish
7- the mobile will start normal
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
@Antiga Prime
Reached to a level where S1 tool works but shows Unknown SIN version . snapshot attached and again stuck ,
thanks added for your quick response and related link .
what else can be done
Antiga Prime said:
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
Click to expand...
Click to collapse
srd34 said:
@Antiga Prime
tried using the steps shown except for opening the phone part for test point and got error attached .
Thanks for the link though . any other view ?
Click to expand...
Click to collapse
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Antiga Prime said:
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
Click to expand...
Click to collapse
srd34 said:
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Click to expand...
Click to collapse
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Thanks , but it seems this SIN file is also not compatible .
Seems the last resort is to reach service center .
Antiga Prime said:
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Click to expand...
Click to collapse
srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Hello. Have you find the decision about QH SUSB on TX?
No solution yet . The device still with me and gets blinked when connected with charger , however . No solution to recover from hard brick I believe . Service centre also of no help since this model was a limited edition one and they dont have in their SKU list to do anything . keeping as fancy paper weight