Related
i tried to install a custom rom but my phone doesnot boot neither it starts in download mode. please suggest what should i do
You could try to flash the stock rom for your phone again. Search Google if there is a stock rom ftf file and flash it with Flashtool
Another possibility is check if you have installed the correct kernel for your custom rom and install both again.
AW: [Q]is my phone soft bricked or hard bricked?
nvnanda said:
i tried to install a custom rom but my phone doesnot boot neither it starts in download mode. please suggest what should i do
Click to expand...
Click to collapse
Could you give details about your installation process? A jig could fix your problem or in other words it could boot your phone in download mode.
If your recovery is available flash a custom ROM with it.
Feuersprotte said:
You could try to flash the stock rom for your phone again. Search Google if there is a stock rom ftf file and flash it with Flashtool
Another possibility is check if you have installed the correct kernel for your custom rom and install both again.
Click to expand...
Click to collapse
how to flash the rom? my mobile doesnot start at all not even in recovery mode
-star- said:
Could you give details about your installation process? A jig could fix your problem or in other words it could boot your phone in download mode.
If your recovery is available flash a custom ROM with it.
Click to expand...
Click to collapse
i installed the rom under normal conditions. for your info i have done this plenty of times but this time i m clueless. i have ordered for a jig but is there any other way to get my phone back?? please suggest.
Have you tried to flash it with 'Flashtool'?
Have you installed the correct Kernel for your custom rom?
Another solution might be to look in the internet for 'wotan server' - here you could try to restore your phone but it will cost a little.
u could also try odin to flash your original formware
Other than the jig is there any way to start the mobile in download mode??
You could try going into flash mode then flash a new kernal or by going into fastboot mode to flash a new custom ROM in Flashtool.
But I think this only works with Xperia Phones.
Feuersprotte said:
Have you tried to flash it with 'Flashtool'?
Have you installed the correct Kernel for your custom rom?
Another solution might be to look in the internet for 'wotan server' - here you could try to restore your phone but it will cost a little.
Click to expand...
Click to collapse
but the server is for sony xperia phones
Sadra.. said:
You could try going into flash mode then flash a new kernal or by going into fastboot mode to flash a new custom ROM in Flashtool.
But I think this only works with Xperia Phones.
Click to expand...
Click to collapse
workd in nexus one too
sorry, didn't have that in mind but you didn't tell us yet what phone you have and if you have used 'Flashtool' or 'Odin Flash tool' which is for Samsung phones, so it is very difficult for us to help you
Feuersprotte said:
sorry, didn't have that in mind but you didn't tell us yet what phone you have and if you have used 'Flashtool' or 'Odin Flash tool' which is for Samsung phones, so it is very difficult for us to help you
Click to expand...
Click to collapse
i have samsung galaxy ace. please tell me how to use any of the tools because my phone is not starting in download mode.
hello everyone
I dont if it has been stated earlier....if yes then pardon me and direct me to the thread
my problem is very weird
in my i9003.....all custom roms work without any prob...but when I try to flash stock rom DDLF2 of my indian firmware then it flashes via odin and shows pass but phone keeps on boot screen.....I tried factory reset but still same
I researched a bit and then after flashing ddlf2 firmware I directly flashed vurrut kernel onto it......dis way my ohine boots in stock DDLF2 firmware and everythung worls fine
BUT the real problem starts whenever I reboot....phone kinda resets itself....all apps corrupt and I hv to re install them....all settings are reverted back to stock
plz help me.....I am searching job and face probs many times due to this issue.....I hv to use custom rom for now neither any modded stock. ..but I want actual stock back
any help plzz
plz help
anikanu said:
plz help
Click to expand...
Click to collapse
How about you flash the Rom via recovery
??Thank Me Up If I Helped You ??
sludge1121997 said:
How about you flash the Rom via recovery
ߙϰߙϔhank Me Up If I Helped You ߙϰߙϛ/QUOTE]
how is dat.....do u mean pre rooted firmware. ...plz elaborate
Click to expand...
Click to collapse
Welcome to the Index page of Xolo Q900. Here the record of everything related
to Q900 can be found.
Index
About Xolo Q900
Installing ClockWorkMod
Stock ROM
Custom ROM based on stock ROM(More stable and faster)
MIUI
News
Tips and Tricks(coming soon!)
can you please again post the stock rom for flashing the rom through flashtool i really need the rom to flash my mobile bak to stock rom please
Stock ROM links(updated)
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
stock rom installation error
irfanjunaid said:
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
Click to expand...
Click to collapse
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
soumyaxoloq900 said:
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
Click to expand...
Click to collapse
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
irfanjunaid said:
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
Click to expand...
Click to collapse
Sorry for very late reply.
Where Am I suppose to find that file [checksum.exe]?
Is it in the phone [havent searched yet] or is it in the Update package [searched but not found]
Thanks
Soumya
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Darkwell_Habridge said:
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Click to expand...
Click to collapse
Try deleting checksum.exe, checksum generator, checksum.ini files.
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Darkwell_Habridge said:
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Click to expand...
Click to collapse
OMG! This problem is not related to checksum. Alright, the problem is due to the absence of driver. You need to install MT6589 preloader drivers inorder to flash roms to MT6589 device. In windows 8, you need to disable driver signature check(google it) to install the driver. Good luck.
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Darkwell_Habridge said:
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Click to expand...
Click to collapse
You are welcome, please don't forget to press thanks!
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing
Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
is it booting and can u go in recovery mode...
AAAni said:
Maybe formatted phone or by installing kitkat for q3000.. it's like hard brick .. please someone help ..:crying::crying::crying:
Click to expand...
Click to collapse
Simply downgrade to Jelly bean!
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
not booting.. not even showing charging.. sp tool says
Error 4032 (Enable DRAM FAILED).. no recovery.. :crying:
AAAni said:
Hi guys plz help me to solve this problem : Error 4032 (Enable DRAM FAILED) when trying to flash
Click to expand...
Click to collapse
Uninstall drivers from pc and reinstall them correctly, then flash it again.
Sent from my XOLO Q3000
not helping..:crying:
AAAni said:
not helping..:crying:
Click to expand...
Click to collapse
U need to flash whole stock rom either Jelly bean or kitkat as u like.
Xolo Q3000 KK S007 27-05-2014.zip
q3000 stock jb 4.2 s011.7z
download one of above as per ur chioce.
extract it in folder.
download sp flash tools.
Extract it in a folder.
Start sptools.exe
choose scatter loading.
select scatter file from above downloaded firmware folder.
select firmware upgrade.
press download
connect ur mobile in switch off condition.
wait till green circle appears.
Start u mobile.
U need drivers installed before the procedure.
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
AAAni said:
tried every sp tool version ..:crying:
tried many rom ..:crying:
even official roms from needrom.com and androidxda.com
and also the link you've given..(Xolo Q3000 KK S007 27-05-2014.zip & q3000 stock jb 4.2 s011.7z ):crying:
but same error :crying:
BROOM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed!
[HINT]:
please check your load matches to your target which is to be downloaded
please someone help me out..:crying:
Click to expand...
Click to collapse
Just explain each step u doing from the very beginning?
Have u selected firmware upgrade option??
Also post some screenshots
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
AAAni said:
My phone was dead after I formatted with option of "format all + download " in sp tool:crying:
was using "PXZ2-4.3.5-q3000 working" and tried to flash "Xolo Q3000 KK S007 27-05-2014" but i think the process was not successful :crying: and now my phone behave like hard brick but it still recognize by pc without battery but usb port disappear frequently ..
I found 1 solution .. can any one upload backup rom of q3000 using "MTK droid tools" please please please .. http://forum.xda-developers.com/showthread.php?t=2447431&page=5 avi3230 bro ... can you make attachment like in this link of preloder and scatter file for q3ooo?
Click to expand...
Click to collapse
Just flash the "Xolo Q3000 KK S007 27-05-2014" firmware as normal, everything will be fine.
Just select firmware upgrade option.
These files are all base files including preloader and scatter ok.
Ur error is cause u formatted preloader , just restore preloader ur phone will boot. :good::good:
If still u cant do it, just PM me.
see this.. error remain same :crying::crying::crying:
Lets start from the base,
Which version of windows r u using & did u hv admin rights?
Sent from my XOLO Q3000 using XDA Free mobile app
tired windows 8.1 32bit & 64 bit, windows 7 32bit with administrative right
In windows 7, install 32 bit drivers, download so flash tool from mtk's official site and flash stock job if ur phone u received with jb ROM else flash kk rom. Flash phone without battery, sim n memory card. Also before flashing, connect our phone with battery inserted and power on. Look whether driver is installed. Drivers to install: mobistel cynus, vcom, pdanet and adb drivers.
Sent from my Q3000 using XDA Free mobile app
its better to take it xolo care..they might charge u but atleast u will get ur phone back...
Same thing happend to me ...
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
Click to expand...
Click to collapse
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
davis.arkel said:
:crying: :crying: After doing a "whole flash format " ... I am able to flash (XOLO Q3000) STOCK ROMS successfully ... But when i start my phone it gets STUCK on BOOTLOOP .... it not charging too..... PLZ HELP ME GUYZ ... wats going wrong here ??? :crying::crying:
---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ----------
and its not entering CUSTOM RECOVERY MODE ALSO (after flashing custom recovery ).. PLZ PLZ PLZ HELP GUYZ ...
Click to expand...
Click to collapse
Please explain the procedure u followed mentioning the stock rom links.
avi3230 said:
Please explain the procedure u followed mentioning the stock rom links.
Click to expand...
Click to collapse
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... so i booted into recovery mode and tried to instal a backup to RESTORE the stock version of android, I was using before .... it failed to complete that and got bricked .....
Every tym i started the phone it got stuck in boot loop .... I tried to flash the stock rom (2 -3 times) ( which i flashed before and was using it )...
BUT NO LUCK ... it did the same bootloop thing ...I tried to enter custom recovery (after flashing philz recovery immediately after flashing the rom )...it worrked 2-3 times but after then, no luck , i wasn't able to boot into recovery also ...
SO I got fed-up and made A "WHOLE FORMAT FLASH" (using sp flash tools) ....
After that my device was detected as UNKNOWN DEVICE ... then i searched the forums and was able to install drivers FOR WINDOWS 8......
and i was able to flash again .... later i tried the rom " XOLO Q3000 KK S007 27-05-2014" and stock rom from some website (the one which i was using before)
and one more "XOLO Q3000 S003 15102013" both the first and last roms were given by (xda xolo q3000 member .... i dont remember his name .. but i guess you know him)
1 out of 5 times i am able to get into recovery mode (after flashing custom recovery ) ..... once in CR mode I tried to format INTERNAL SD and it showed " "ERROR : unable to format internal storage "
AND i did a memory test also and everything was good except ERROR: NAND FLASH NOT FOUND .....
.. THANKS IN ADVANCD .... PLz Help
davis.arkel said:
Well, i was using HNY 15 series ROM(rooted)... and My battery was a bit low .... and the rom had fair number of ISSUES and BUGS ... ........
Click to expand...
Click to collapse
follow this link.
use sptools.
if u use version 3 use firmware upgrrade option.
if u use version 5 use fomat+dowload option.