Related
Hi guys,
Well, after having my P5100 (Samsung G. Tab 2, 10.1) with a stock rom, I've decided to change it for a Cyanogen stable rom, dated of 2013-09-23 19:17:17. Stock rom (4.2.2) was very slow, with lots of lag on it.
I have done everything as the "manual" says, and installed the above mentioned rom. It became more fluid, and more simple. Perfect.
But i am having here an issue, that I don't know how to solve it.
The thing is that I usually read newspapers on my Tab. This works as it follows:
1. we download an app of the newspaper,
2. every time we have a new edition we receive a notification by email, saying that the new issue is available for download;
3. we open the app and start downloading;
4. after downloading, it starts installing the newspaper (since it is a bit interactive and not just a .pdf)
Since I changed to Cyanogen, with the same 4.2.2 as I had on stock rom, when the newspapper installation comes to end, the app simply closes with error. From that moment, I can't even open the app since it simply will close again with error.
Any ideas how to solve this that doesn't require getting back to stock rom?
Many thanks! :good:
QR7 said:
Hi guys,
Well, after having my P5100 (Samsung G. Tab 2, 10.1) with a stock rom, I've decided to change it for a Cyanogen stable rom, dated of 2013-09-23 19:17:17. Stock rom (4.2.2) was very slow, with lots of lag on it.
I have done everything as the "manual" says, and installed the above mentioned rom. It became more fluid, and more simple. Perfect.
But i am having here an issue, that I don't know how to solve it.
The thing is that I usually read newspapers on my Tab. This works as it follows:
1. we download an app of the newspaper,
2. every time we have a new edition we receive a notification by email, saying that the new issue is available for download;
3. we open the app and start downloading;
4. after downloading, it starts installing the newspaper (since it is a bit interactive and not just a .pdf)
Since I changed to Cyanogen, with the same 4.2.2 as I had on stock rom, when the newspapper installation comes to end, the app simply closes with error. From that moment, I can't even open the app since it simply will close again with error.
Any ideas how to solve this that doesn't require getting back to stock rom?
Many thanks! :good:
Click to expand...
Click to collapse
try wiping cache in cwm and also cache of newspaper app also
this might help you
aditya rathee said:
try wiping cache in cwm and also cache of newspaper app also
this might help you
Click to expand...
Click to collapse
Ok, I will try that!
Let's see if it works...
Thank you!
Hi there,
I've tried what you suggested, the error still happens.
I really don't know why it runs on Android 4.2.2 stock, and don't on Android 4.2.2 cyanogen.
Thanks anyway. If you remember anything else to suggest, I would appreciate.
QR7 said:
Hi there,
I've tried what you suggested, the error still happens.
I really don't know why it runs on Android 4.2.2 stock, and don't on Android 4.2.2 cyanogen.
Thanks anyway. If you remember anything else to suggest, I would appreciate.
Click to expand...
Click to collapse
yeah why not
some apps dont run in cyno rom where as they run without any problems in stock one
whatsapp is a common example of this bug it give problems in cyanogenmod roms sometimes
try older version of the newspaper app it may run
good luck :good::good:
Hello,
I've been reading this forum for quite some years and using some of the tutorials and ROMs from here but never actually posted anything and now that I have a few questions about on of the ROMs I'm using now I'm not quite sure where to post it since as a newly registered member I can't post anything in the correct ROM Thread [ http://forum.xda-developers.com/showthread.php?t=2467013 ], so please be patient with me.
I thought it would make more sense to post my actually questions than trying to reach those 10 posts to be able to post it directly there.
So now to my questions:
I have a HTC Desire S (obviously) and had for about 1 1/2 years now an old CoreDroid Version from here (can't remember which one) which I was quite happy with till it started to crash more and more often, battery kept draining and then there came a point a few weeks ago where it would just randomly go out and wouldn't restart till you charged it again.
That got me so annoyed I thought I either buy a new HTC Desire 310 soon or give another ROM a try, so I chose the cm-11-20140324-UNOFFICIAL-saga.zip from the first page and installed it after remembering how to do so.
Then the Gapps and started configuring it.
So far so good, ROM looks good, stable, battery is working much longer now, so thanks a lot.
But I had and still have some issues.
Whatsapp wouldn't instal, so through the search function I would a way around it (in the end downloading it from whatsapp directly and installing it through the .apk worked) and got that sorted.
The next thing is still a worry to me, I used to sync my contacts from my outlook through android-sync [ http://www.android-sync.com/ ] which I bought after non of the other syncing methods worked to my satisfaction. Everything worked fine with the old ROM (after I set it up) but with the new ROM the program on my computer can't find the mobile phone anymore, I tried to reinstall the ADB drivers, but it didn't work (I sent the error log from the program to the developer a few days ago but still haven't heard back), so maybe someone around here knows a way around it?
Last night I experienced another issue, the clock works fine and after I installed the ROM I set up a few different alarm clocks and they worked. But yesterday I wanted to change the alarms and now every time I try to access the alarm clock the clock app stops working "Clock stopped working" and it closes.
I can delete the alarms and set up a new one, but only the time, then it saves and when I try to change the days or the sound same error appears. I searched the forum and internet for a bit and found ideas like deleting the clock data and cache, rebooting the device, but none worked.
And last but not least it seems I can't find the right settings for it but every time I swype or type on the keyboard it vibrates. I turned off all the other noises that the phone made while typing but this one I can't find. I would like my phone to be silent and don't vibrate when I type. Where can I find the settings for it?
If anybody could help me with this I would appreciate it a lot.
Kind Regards
Marvin
For vibrating on keyboard press setting are at SETTINGS/Presonal/Languager and Input/Keyboard settings (for me it's ASOP keyboard settings).
Did you do dirty flash or clean one? Clean ROM flash is recommended.
Other problems I got with previous devil-kin CM11.Couldn't get usb mass storage and adb working.Now I keep Flinny CM11 build and it works.I didn't try devil-kin last build.
Maybe you can try install Flinny alpha 5 CM11 and try if that work.
SKENER said:
For vibrating on keyboard press setting are at SETTINGS/Presonal/Languager and Input/Keyboard settings (for me it's ASOP keyboard settings).
Did you do dirty flash or clean one? Clean ROM flash is recommended.
Other problems I got with previous devil-kin CM11.Couldn't get usb mass storage and adb working.Now I keep Flinny CM11 build and it works.I didn't try devil-kin last build.
Maybe you can try install Flinny alpha 5 CM11 and try if that work.
Click to expand...
Click to collapse
I installed Flinny alpha 5 CM11 now and tried it out. I had a few crashes with the devil-kin version too and bought a new battery, so hard to tell what solved what, but so far so good.
But for the syncing problem, now I have an even worse error:
ht*p :// i.gyazo.com/798a67697deb9f91904e7cac9b62bf76.png
with the devil-kin version it still found something and just had problems with the adb drivers, now there seems to be something else going on.
m4rvin88 said:
Hello,
That got me so annoyed I thought I either buy a new HTC Desire 310 soon or give another ROM a try, so I chose the cm-11-20140324-UNOFFICIAL-saga.zip from the first page and installed it after remembering how to do so.
Then the Gapps and started configuring it.
So far so good, ROM looks good, stable, battery is working much longer now, so thanks a lot.
But I had and still have some issues.
Whatsapp wouldn't instal, so through the search function I would a way around it (in the end downloading it from whatsapp directly and installing it through the .apk worked) and got that sorted.
Click to expand...
Click to collapse
Regarding that issue I also got problems with many other apps i.e. Redphone, Textsecure, Chiffry and so on there always comes the message that these apps are incompatible to my device - strange I also use cm11_saga_flinny_alpha5 Kernel 4.4.2.
These messages of incompatibility are generated by Google play store, when comparing AndroidManifest.XML permissions and requirements with the phone...
Further more Issues at Finny/Devilkin CM11.0
Hello guys,
I am also new at this Forum although using it "passiv" since years. Now I flashed the CM 11.0 from Devilkin and ones from Flinny.
- Unofficial CM10.2 / CM11.0 build for Saga / Desire S
All works (both ROMs) great up to the wired headphone Controles.
I think this might be the right thread to Post that until I reached the Number of Posts to put the in the right developerthread. Hope anyone can help.
The exactly problem:
I use orginal HTC-Headset with three controller Buttoms. The headphone itself is working though I can hear music and sound but the Controls and the Mic are not working. I tried to register an input with the jayzheadphone app but it shows no input. Headphone and controls worked fine with stock ROM.
Thank you for help.
@Terodax
Sorry but I cant't evaluate your issue cause of the missing HTC-Headset, but I got some other weird thing with the "mute" button on calling someboy it fails in doing it .-/
So I worked around the little problem in "holding" the call -> that works and it's like muting
htc wihc room to use
Hello
I bought this item.
http://www.ebay.com/itm/121361166744...84.m1423.l2649
Wich rom to android 4 or last?
How can I install those rom?
I need to using zip flashable file on recovery mod or addoin way?
will I need to flash the modem (phone) after?
has the recovery a nandroid backup option? I wanna backup the current rom like it is.
which is the best recovery for that item?
Thanks
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
Hello
I need to use whatsapp and facebook mensseger on it.
thanks
Q&A for (Share) Resurrection-Remix-LP-v5.5.1-ferrari
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (Share) Resurrection-Remix-LP-v5.5.1-ferrari. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
apna.suresh0305 said:
I think any custom ROM can't replace the MIUI camera, i tried CM 12.1 but camera is very upset in terms of picture clarity as well camera app is very laggy and some times gets hang and wont response. Not able to dare to try custom ROMs due to this reason.
It would be really very great if anyone can able to port MIUI camera to these custom ROMs.
Click to expand...
Click to collapse
Tottaly agrre with you, xiaomi phone camera is main reason for me, too bad none custom rom able to provide equal result from camera miui rom. If there any it would be fantastic
cannot get cwp installed
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
vrtsvas said:
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
Try version 4 of the toolkit.
That worked for me.
Also, make sure you do exactly as the desctiption says, don't change the order of actions (as i did) because then it will not work.
First make sure that you pc has the right drivers (or use this: http://forum.xda-developers.com/showthread.php?t=2588979)
Then use v4 from this link and use the right order (http://en.miui.com/thread-117336-1-1.html)
So first TWRP then root (if you still need it).
Automatic turn off issue
How to fix automatic turn off issue
WiFi not working
Please provide WiFi driver
Mi4i going into bootloop after flashing CM based roms!
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
aniketmule said:
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
Click to expand...
Click to collapse
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
elot01 said:
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
Click to expand...
Click to collapse
I think I was using developer rom and flashed CM on it directly so the problem occured. I read somewhere on a forum that you should flash it on global rom. I tried it with ASOPA-L rom as it was having the same problem and it worked flawlessly. Now going to try it with latest CM rom.
One thing I noticed the camera quality is better in ASOPA-L but this rom lacks performance mode.
I'm experiencing bad speaker sound after installing this ROM. Is there any way to fix that.
Sent from my Mi 4i using Tapatalk
I'm absolutely loving this rom. I've no idea why xiaomi let's miui be so slow and laggy. This room feels great and everything runs/opens so much faster and it looks fantastic. Cmon Xiaomi, step up your game, miui is way too heavy.
Like other people have mentioned, the only downside to not having miui is the camera. I've tried a bunch of others and the quality is greatly reduced compared to the miui camera. Please someone, please port miui 6 camera!!! PLEASE!! I'll be your best friend.
Whenever i boot ..it turns off...pls hlp
Thanks in advance
vrtsvas said:
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
i also experienced the same problem when i was on miui 7 beta... i was able to flash twrp recovery but failed to flash custom ROMs... after that i reverted back to miui6 6.6.10.0 by using fastboot... and then again flashed twrp using mi toolkit v4 and succeeded in flashing custom ROM... this works 100%.Keep in mind that u can't flash a custom ROM..if u r on later version of 6.6.10.0
Tried lineage-14.1-20170305-UNOFFICIAL-n8013.zip on a Galaxy Note 10.1 GT-N8010 (16GB), but after reboot, i am stuck in a never ending "boot logo" (?) (blue circle repeatedly shifting from right to left on a blue bow, nothing else), tried it twice, waited twice for more than 15mins, nothing changed (nevertheless, I could successfully install cm-13.0-20160831-UNOFFICIAL-n8013.zip).
Has anybody sucessfully installed 14.1 on a GT-N8010 ?
Further info: I have an additional 64GB-SD-card where I stored the aforementioned lineage file as well as open_gapps-arm-7.1-nano-20170418.zip and open_gapps-arm-7.1-stock-20170418.zip.
Tried all installations (also cm-13) using twrp-2.8.6.0-gt-n8010.
Any comments appreciated, even more so if they help getting 14.1 installed.
Regards
aqua14
2017-04-19 10:30 (MESZ)
Additional observation while again trying to install lineage-14.1-20170305-UNOFFICIAL-n8013.zip:
* Meanwhile I found that lirokoa recomended the TWRP version mentioned in the CM13 thread, i.e. twrp-2.8.7.0-gt-n8013 (instead of 2.8.6.0 in my first try) and managed to install it on my Galaxy GT-N8010, but after all, this made no difference.
* However, while carefully watching the flash log I found that the "target" was logged to be "samsung/p4noterfxx/p4noterf: 4.4.2/....", and not "samsung/p4notewifi...." as I rather would expect for a GT-N8010.
Hence my question: can it be that (a) either during the paketing of lineage-14.1-20170305-UNOFFICIAL-n8013 something went wrong, or that (b) my tablet pretends to be a different one (namely GT-N8000)? I suspect this confusion could be the reason of the aforementioned boot trouble.
At least I am sure of this fact: I haven't got a tablet with phone function, its the version only having the wifi function, and in the system info provided by JellyBean as well as KitKat I could read its the GT-N8010.
Any constructive hints or suggestions appreciated
Regards
aqua14
Additional observation:
* Both lineage-14.1-20170305-UNOFFICIAL-n8013.zip and lineage-14.1-20170116-UNOFFICIAL-n8013.zip don't work on my GT-N8010 (reboot after flashing leads to a boot loop) , whereas cm-14.1-20161208-UNOFFICIAL-n8013.zip did work (not everything tested yet, but wifi, installing apps (another keyboard, file manager, ...) worked ok.
2017-04-20
Eventually ...
I guessed just from the beginning, that the right path might again be hidden in all the tidbits given in the discussion around the lineage 14.1 thread (hxxps://forum.xda-developers.com/galaxy-note-10-1/development/rom-nougat-t3505239)
... and indeed! It took me a while to crawl through all comments, questions, answers, and unfortunately also complaints, the latter in some parts being expressed even in close-to-nasty manners. Being a developer as well (DB area) I as well appreciate constructive criticism and prefer it to demotivating complaint. However, some of the participants obviously never have learnt making an effort to keep the difference between both, maybe they are even unlucky enough not to perceive hours and hours of voluntary work of their contemporaries as a gift. Hey guys! Behave!
Whatsoever. I finally made the way through the texts and even managed to install the latest version (lineage-14.1-20170305-UNOFFICIAL-n8013.zip) and ... beneath my sincere thanks going to lirokoa (taking a bow 4 u), I'd like to greet and thank all the testers *and* contributors of helpful hints (regarding the installation of the ROM itself as well a manifold of aspects to special apps), also including especially those who took their time to precisely & factually describe which procedure did fail (!), which -in sum- made my day start successfully now!
For all those still struggling: keep trying!
After all this reading I restarted a new try and had my breakthough ~after having read the following comments in the aforementioned thread: #352/p.36, #364+#365/p.37 and some others of similar content, hence thanks also to alessandro_xda, hektor2hektor2, CDiazF04, but also all the others who keep the discussion vivid and interesting, and a special smile to miz_pimp for having increased the level of friendliness throughout the course .
And yes, I agree that many contributors are right in suggesting to include the one or other hint to the post #2 of liroka.
I guess it's presumably just lack of time on his side that this has not yet happened. On the other hand... :-> if I could walk through all the interesing discussion in one evening and draw my conclusions in order to get a free ride to another "new life" of my ol' N8010, ... I am quite positive that others can do so as well.
Continuously following the discussion...
aqua14
Thanks guys!
Just had the same problem. I just needed to upgrade twrp and try again. I really appreciate this site! Now my old tablet is doing better than my husband's new one.
Finally loaded Lineage 14.1
I have just updated my GT-N8010 with lineage-14.1-20170810-UNOFFICIAL-n8013.zip + open_gapps-arm-7.1-mini-20181010.zip & used the latest TWERP release 3.0.2 to do this.
I initially tried loading these two as above, the first issue was that having loaded them the tablet would get stuck with a battery symbol and would not boot. The way I found around this was to boot the tablet into Odin mode but choose Reboot Phone rather than going into Odin itself. This then enabled Lineage to boot but it then got stuck in a loop, the lineage logo would go through its line with a moving O, then have three O's and start again.
Eventually I found that I could get cm-13.0-20160831-UNOFFICIAL-n8013.zip to load with open_gapps-arm-7.1-mini-20181010.zip and this worked well. I then did a dirty load (No Wiping) of lineage-14.1-20170810-UNOFFICIAL-n8013.zip and this is now working without problems.
Hope this helps and best of luck!!
macgd016 said:
Finally loaded Lineage 14.1
I have just updated my GT-N8010 with lineage-14.1-20170810-UNOFFICIAL-n8013.zip + open_gapps-arm-7.1-mini-20181010.zip & used the latest TWERP release 3.0.2 to do this.
I initially tried loading these two as above, the first issue was that having loaded them the tablet would get stuck with a battery symbol and would not boot. The way I found around this was to boot the tablet into Odin mode but choose Reboot Phone rather than going into Odin itself. This then enabled Lineage to boot but it then got stuck in a loop, the lineage logo would go through its line with a moving O, then have three O's and start again.
Eventually I found that I could get cm-13.0-20160831-UNOFFICIAL-n8013.zip to load with open_gapps-arm-7.1-mini-20181010.zip and this worked well. I then did a dirty load (No Wiping) of lineage-14.1-20170810-UNOFFICIAL-n8013.zip and this is now working without problems.
Hope this helps and best of luck!!
Click to expand...
Click to collapse
Have you tried out my LineageOS 14.1 ROM? https://androidfilehost.com/?fid=1322778262904016892
I'm sorry to say that I have not as I was not aware of your rom till now so thanks for for your post and I have downloaded it just in case I find issues with 14.1-20170810. Out of interest how does it differ from 14.1-20170810
macgd016 said:
I'm sorry to say that I have not as I was not aware of your rom till now so thanks for for your post and I have downloaded it just in case I find issues with 14.1-20170810. Out of interest how does it differ from 14.1-20170810
Click to expand...
Click to collapse
Mine is more up-to-date. But I will be making a update for that ROM later this week.
Here is my thread for the ROM: https://forum.xda-developers.com/galaxy-note-10-1/development/rom-lineageos-14-1-t3848514
Oreo rom for Samsung galaxy note 10.1 gt n8000
Pls any Oreo rom for gt n8000 my nougat rom can't play videos since i rooted it, after unrooting it still can't play any video. Pls is there any fix.
Flash stock rom via Odin.
JJEgan said:
Flash stock rom via Odin.
Click to expand...
Click to collapse
Will flashing the phone with lineage 14.1 again help? Cus I can't go back using stock rom
Back to stock then flash custom rom.
Problems fixes use SEARCH.
Rom is in testing so its up to you to flash with potential problems or not .
I have the same problem. Note 10.1 N8010 and it is stuck on the logo " blue circle repeatedly shifting from right to left on a blue bow".
I cannot locate the file TWRP for the note 10.1 N8010.
The suggestions were to update Twrp but the file I have found online is (
twrp-3.4.0-0-lt03wifiue.img.tar7.5M2020-06-23 21:11:34 EDT
This file is loaded using odin and it is successful but the Twrp doesn't work anymore. Therefore, I had to go back and load the file (twrp-2.8.6.0-gt-n8010.tar).
Can someone please help me with this issue.
TWRP site is twrp.me
Có ai up rom android 7.1.2 hoặc 9.1 cho galaxy GT-N8010, qua TeamViewer không? cảm ơn.
[email protected]
Translated by GT:
Has anyone uploaded rom android 7.1.2 or 9.1 for galaxy GT-N8010, via TeamViewer? thank.
[email protected]
See your other post
Hi everyone,
This is driving me mad. I've been trying to install a bunch of different ROMS on my Samsung Galaxy A10 and while it seemingly installs just fine, when I press "reboot system" it gets into a perpetular loop. Am I doing something wrong here?
Bliss OS Rom v14 w/ Android 11 for Samsung A10 Arm64 ( Stable Unofficial ) released 2021
IMO you should contact developers of Bliss OS to get your issue fixed.
Recovering Spaghetti said:
Hi everyone,
This is driving me mad. I've been trying to install a bunch of different ROMS on my Samsung Galaxy A10 and while it seemingly installs just fine, when I press "reboot system" it gets into a perpetular loop. Am I doing something wrong here?
Click to expand...
Click to collapse
I don't have experience with Samsung phones in particular, but with Moto phones I've used the online recovery tool to restore the phone back to stock and start over. Not sure there is anything similar with Samsung? Good luck!
jwoegerbauer said:
Bliss OS Rom v14 w/ Android 11 for Samsung A10 Arm64 ( Stable Unofficial ) released 2021View attachment 5799499
IMO you should contact developers of Bliss OS to get your issue fixed.
Click to expand...
Click to collapse
Hi,
The thing is I also tried DotOS & OctaviOS & the issue perseveres
vdun1188 said:
I don't have experience with Samsung phones in particular, but with Moto phones I've used the online recovery tool to restore the phone back to stock and start over. Not sure there is anything similar with Samsung? Good luck!
Click to expand...
Click to collapse
Hi, I believe there is, but the thing is that this is like my third ROM on this phone (Decided to install a new one after my bluetooth headphones refused to connect with my phone while being able to connect just fine to literally everything else) & this is the first time I'm having issues like that. Before, when I managed to install the ROM then it was smooth sailing since hence why I'm asking for help. I've spent a few hours trying different ROMS already.
Recovering Spaghetti said:
Hi, I believe there is, but the thing is that this is like my third ROM on this phone (Decided to install a new one after my bluetooth headphones refused to connect with my phone while being able to connect just fine to literally everything else) & this is the first time I'm having issues like that. Before, when I managed to install the ROM then it was smooth sailing since hence why I'm asking for help. I've spent a few hours trying different ROMS already.
Click to expand...
Click to collapse
Since it has worked fine up to now I'd like to first exhaust all the concievable solutions before going for the nuclear option of stock firmware.
Recovering Spaghetti said:
Since it has worked fine up to now I'd like to first exhaust all the concievable solutions before going for the nuclear option of stock firmware.
Click to expand...
Click to collapse
Understood. For some reason that is beyond my comprehension, it seems it is sometimes suggested to install stock and then a different custom ROM. Again, I don't know what it is actually supposed to do, as I've stayed with LineageOS to keep it simple. I'm not saying to stay with stock, just use it to get phone back to default, then start from there.
nuclear option..stock - hahaha )
Gawd Damit, I tried LineageOS too & a bunch of other stuff & it's always the same problem. I'm all out of ideas now.
Please help, Tried every ROM, same result, doesn't boot
Hi, I've got a Samsung Galaxy A10 SM-A105F and I tried installing all kinds of different roms on it and they install just fine but then when i go to boot to system I end up in this hell hole of perpetual booting and restarting. I've been at it...
forum.xda-developers.com