[ROM][UNOFFICIAL][MESONA][4.4.4] CarbonROM by TamsuiCM11 - Sony Xperia Miro, Tipo (Dual), J, E

Features
All of our features can be found on Carbon ROM site here:
Carbon Features
Sources:
Github.com/CarbonDev
Github.com/TamsuiCM11
Github.com/ShivangDave
Working
- Display
- GSM and mobile data
- Screen rotate
- Location
- WiFi
- Bluetooth
- Voice Call
- Audio
- Browser
- Hotspot
- Pie Controls
- OmniSwitch
- H/W Video Playback
Bugs
- Camera
This build includes:
Release 1:
- Initial Release
Release 2:
So here's the changelog:
- Hover [Check notifications without switching apps ! See screenshots]
- Performance Upgrade [best build by far]
- Set Governor: Interactive
- I/O: Noop
- Reboot is faster​
XDA:DevDB Information
Unofficial CarbonROM for Mesona, ROM for the Sony Xperia Miro, Tipo (Dual)
Contributors
ShivangDave, TamsuiCM11
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: No specific Firmware Required
Based On: CarbonDev
Version Information
Status: Alpha
Created 2014-07-05
Last Updated 2014-07-06

Credits goes to this awesome team named TamsuiCM11, CyanogenMod & yeah CarbonDevs too !
Tipo ----> joebonrichie
Miro ----> Me [Obviously ]
J ----> lozohcum, AshRoller
E ----> hsr0,joebonrichie,UltragamerHD
and NSDCars5 for being there for the team
Downloads:
http://shivangdave.com/roms/
TamsuiCM11.github.io Secondary Projects​

you can port for tipo, please

locprohp said:
you can port for tipo, please
Click to expand...
Click to collapse
This is not the place to ask this question.
Anyway, Tipo already has CarbonROM

And once again, I'm NSDCars5 - that's an s, not a d. Seriously, though, all I did was make the website. You guys do the awesomeness.
Isn't OmniSwitch kinda unstable? I tried it on my E when I had Carbon, it didn't work as expected at all.

NSDCars5 said:
And once again, I'm NSDCars5 - that's an s, not a d. Seriously, though, all I did was make the website. You guys do the awesomeness.
Isn't OmniSwitch kinda unstable? I tried it on my E when I had Carbon, it didn't work as expected at all.
Click to expand...
Click to collapse
lol my bad.. Haven't got time to play with build yet... flashed tested and turned off xD

Carbon has one nice feature. When you took your phone from the desk to hand it turns on.

lozohcum said:
Carbon has one nice feature. When you took your phone from the desk to hand it turns on.
Click to expand...
Click to collapse
also they merged active display.. I'm loving this feature.. There are so many features that i had to mention their website than writing about features..

Unfortunatelly some patches fail in framework and it requires re-writing them.

Just tried this ROM. Works really well! Thanks, Team Tamsui11!

Ram limited to lower than 400mb. Why?
Sent from my ST23i using XDA Premium 4 mobile app

what is the camera bugs?
cannot snap picture?

Update Available !!
So here's the changelog:
- Hover [Check notifications without switching apps ! See screenshots]
- Performance Upgrade [best build by far]
- Set Governor: Interactive
- I/O: Noop
- Reboot is faster
for downloads: here !

4.4.4
Bump Android Version [4.4.4]
"Bugs are Same!"
Downloads: Here

Will there be a tipo version?

Problem flashing
I tried to flash che cyano from your blog but i got error 7, so i flashed the boot.img through recovery, than purple red and when i tried to go into recovery, nothing happened.. tried several times and stuck in that situation, flashed vengance kernel V2 and i saved the device but i still have the stock rom and now i have twrp installed instead of the CWM, what happened? Can someone helps me? Thx in advance

Just flash cwm recovery thru fastboot, and reflash your stock rom, if you stuck in twrp recovery, you still can back to cwm and your backup rom...
Sent from my C1505 using XDA Free mobile app
---------- Post added at 06:48 AM ---------- Previous post was at 06:47 AM ----------
Why don't you 'READ' before flash the rom? ... :sly:
Sent from my C1505 using XDA Free mobile app

ShivangDave said:
So here's the changelog:
- Hover [Check notifications without switching apps ! See screenshots]
- Performance Upgrade [best build by far]
- Set Governor: Interactive
- I/O: Noop
- Reboot is faster
for downloads: here !
Click to expand...
Click to collapse
@NSDCars5 - Check this.
Hover.
AOKP + Hover?

NeoTrix said:
@NSDCars5 - Check this.
Hover.
AOKP + Hover?
Click to expand...
Click to collapse
The new AOKP build doesn't boot.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
But yeah, I'll check that out...

Somebody can send me the file of this rom for Xperia J please?

Related

[DEV] Unoficial Pure Speed X [KitKat] [Build from source] [LINARO]

Hello. Before we start i would like to thanks the Pure Speed X developers (@MartinRo and others) for this ROM.
Kernel Source :
android.googlesource.com/device/asus/flo-kernel
Changelog :
Nightly 1
-Initial release with GCC Toolchain
-129.2 mb
-Latest kernel included
-Kernel compiled with GCC
-Booting
Nightly 2
-Second release compiled using Linaro toolchain
-128 mb
-New kernel PSX Kernel is providing issues,using the default one by google
-Kernel compiled using Linaro 4.7 toolchain
-Latest PureSpeedX source updated to android 4.4.2 KitKat
How to flash :
Follow carefully these instructions,so you won't come here as a noob to complain because your nexus7 get bricked
Let's start
-Unlock your bootloader
-Root your tablet
-Flash TWRP through Goo.im
-Full wipe (Means : wipe data,cache,dalvik cache)
-Flash ROM
-Flash GApps
-Reboot
Download Links :
Nightly 1
Nightly 2
Things to modify / apply :
-Add AROMA Installer [10% done]
-Add PureSpeedX Kernel [WIP : PSX Kernel has errors]
-Add Nova Launcher
-Add my own bootanimation
Things to insert in AROMA Installer :
Launcher selection :
-Nova Launcher
-Stock Launcher
-Nexus 5 Launcher
-Apex Launcher
Browser selection :
-Stock 4.4.2
-Chrome
-Dolphin
-Opera
Social selection :
-Facebook
-Twitter
-Google+
-LinkedIN
-Flipboard
Kernel selection :
-ExperimentalX Kernel
-Franco.Kernel
-M-Kernel
-Other kernels to come
Developement status :
Working
-Wifi
-GPS
-Bluetooth
-Camera (both)
-Oh come on...everything !
Bugs
-None reported .. Enjoy
Thanks to Google and Pure Speed X team who made it possible !
Mine, as @martinro wants,i posted it in developement section and clearified that it's unoficial
Thanks. Just flashed and no problems sofar. Just wondering if there really is a PSK included. About tablet seems to show the stock kernel.
Edit: Kernel link in OP also goes to stock kernel source. Ok so it's stock kernel and not PSK .
Oh yes my error,i will remove it,i just download the stock one,next nightly will include it
Thanks buddy!! Thanks for bringing this amazing ROM back to us!!!
By the way, the PSX team no longer develop for Flo officially?
Not ...
Sorry but tonight no nightly,i'm sick and i'm trying to fix an error which i had in psx for kumquat
Next Build changelog (will be avaiable tomorrow night) :
- Linaro kernel
- PSX Kernel
- Latest PSX
- Recovery changes
- Will try to add HALO if i get time
Hold on tight
Thanks for doing this. I was just thinking about building my own psx ROM for my flo. What commands do you use to sync the github?
Sent from my Nexus 7 using Tapatalk 4
Do I have to wipe when coming from last official PSX build?
Does this include the bionic dalvik optimization?
SupWiz17 said:
Thanks for doing this. I was just thinking about building my own psx ROM for my flo. What commands do you use to sync the github?
Click to expand...
Click to collapse
Maybe this.
https://github.com/PSX-PureSpeed/android_manifest/tree/kk-4.4
meekrawb said:
Maybe this.
https://github.com/PSX-PureSpeed/android_manifest/tree/kk-4.4
Click to expand...
Click to collapse
Exactly
But the branch used is "psx_v3"
matcho13579 said:
Do I have to wipe when coming from last official PSX build?
Click to expand...
Click to collapse
No,just a wipe cache and dalvik cache are fine
EDIT : Impossible to build for kumquat (missing a lot of codes in hardware and framework) ,and i have no time to fix everything
So,new nightly is coming
Also is impossible to add HALO,there's a difference in API
So,psx kernel has been added and more features to come !
And soon,i'll release a gold version,with a lot of tweaks and features
EDIT2 : Compiling new build,hope to don't get any errors with kernel
So...bad news,as i thought,PSK still giving me some problems gr...
While i'm trying to fix this error,enjoy the next build,coming soon today
Merry christmas
Waiting for today's build
Am I the only one having issues with the back button in Navigation not working?
xraytid said:
Am I the only one having issues with the back button in Navigation not working?
Click to expand...
Click to collapse
A reboot normally fixes this issue for me. I've had it occur on about 3 4.4.x rom's so far.
Saythis said:
A reboot normally fixes this issue for me. I've had it occur on about 3 4.4.x rom's so far.
Click to expand...
Click to collapse
I tried that to no avail and never had this issue on any other 4.4.x rom but flashing Elemental X fixed the issue which is usually the first thing I do with other ROMS. Definitely a stock kernel issue
Nightly2 in upload
released !!
link > https://www.mediafire.com/?4788nno7m9y8a2k
DroidModderXtreme said:
released !!
link > https://www.mediafire.com/?4788nno7m9y8a2k
Click to expand...
Click to collapse
Downloading now
Sent from my Nexus 7 using Tapatalk 4

[ROM][Evita][Nightlies][4.4.2](2/16)AOKP - Unofficial

Downloads in Post #2!
Introducing a AOKP rom for the Evita on Android version 4.4.2
This rom will be released on a nightly basis. Buttery SMOOTH ​Unofficial
%100
AOKP
Android version: 4.4.2
List all Questions and Off-Topic discussions here
===========AOKP==================================================================
zip: v2.80_aokp_evita_kitkat_unofficial_2014-2-16.zip
size: 170m
============================================================================================
================================================== ==========================================
AOKP just started 4.4.2 and is only officially on 5 devices. Now on the Evita!=====
================================================== ==========================================
================================================== ==========================================
======================================AOKP Changelog====================================
================================================== ==========================================
========================================Not Working=======================================
- You tell me!?
================================================== ==========================================
========================================Get GApps=========================================
- 0 Day PA GApps
- BaNkS GApps
================================================== ==========================================
========================================Recovery==========================================
- Unofficial CWM 6.0.4.4 Recovery
- [unofficial] [recovery]twrp-2.6.3.0 4.4 compatible
================================================== ==========================================
========================================Credits==========================================
- @Techinstein (My self for coming up with idea and compiling roms.)
- @ AOKP
- @ Cyanogenmod Inc
- @ Google
- @Aznrice2k4
- @brotheross
- @Jrio001
- @phoenixita
- @zhuhang
- @ViPER520
- @rovo89
- @BaNkS
- @TKruzze
- @ Any others I forgot?
================================================== ==========================================
====================================Recommendations=====================================
- REPORT BUGS :: HERE (Don't clutter this thread with bugs.)
- Redpoints Everything thread for the HOXL
- Torched Kernel :: HERE (For Overclocking and Underclocking + Button Light Notification)
- | KERNEL | AOSP/CM | HYBRID | Boosted Evita k2 | 01/14/2014
- Viper4Audio's website :: HERE
- Zhuhangs thread for V4A Support
================================================== =========================================
My website , "All About Tech" :: http:://www.ThingyTech.com​
As per usual
DISCLAIMER: I am not responsible for any damage done to your phone, this is all
a choice made by you....
XDA:DevDB Information
[ROM][Evita][Nightlies][4.4.2] AOKP(Now w/Ribbons!) - Unofficial (2/16), a ROM for the AT&T HTC One X
Contributors
Techinstein
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOKP
Version Information
Status: Stable
Current Stable Version: 2.60
Stable Release Date: 2014-02-16
Current Beta Version: v0.90
Beta Release Date: 2014-01-16
Created 2013-12-31
Last Updated 2014-02-16
Reserved
Downloads
- AOKP v2.80 Super Stable!
AOKP :: Copy
- AOKP v2.70 Super Stable!
AOKP :: Google Drive
- AOKP v2.60 Super Stable!
AOKP :: Copy
- AOKP v2.50 Super Stable!
AOKP :: Copy
- Super Bowl XLVIII Edition AOKP v2.40 Super Stable! , with Ribbons. HBOOT 2.15 flash if you get Random Reboots
AOKP :: Copy
- AOKP v2.30 Stable! , with Ribbons, system animations!
AOKP :: Copy
- AOKP v2.20 Stable!
AOKP :: Copy
- AOKP v2.11 Stable!
AOKP :: Copy
- AOKP v2.10 Stable!
AOKP :: Android File Host FiXED!!!
- AOKP v2.00 Stable!
- AOKP :: Android File Host
- AOKP v1.90 Stable!
- AOKP :: Android File Host
- AOKP v1.80 Stable!
- AOKP :: Android File Host
- AOKP v1.70 Stable!
- AOKP :: Android File Host
- AOKP v1.60 Stable!
- AOKP :: Android File Host
- AOKP v1.50 Stable!
- AOKP :: Android File Host
- AOKP v1.40 Stable!
- AOKP :: Android File Host
- AOKP v1.30 Stable!
- AOKP :: Android File Host
- Xposed :: Android File Host Official cancellation of Xposed AOKP due to errors, cool statusbar AOKP features added tonight anyway!
- AOKP v1.20 Stable!
- AOKP :: Android File Host
- Xposed :: Android File Host Bad zip :: Worked 4 me 4got to checked upload even though I recognize 140 m. Removing.
- AOKP v1.10 Stable!
- AOKP :: Android File Host
- Xposed :: Android File Host
- AOKP v1.00 Stable!
- AOKP :: Android File Host
- Xposed :: Android File Host
- AOKP v0.90 beta
- AOKP :: Android File Host
- Xposed :: Android File Host
- AOKP v0.80 beta
- AOKP :: Android File Host
- Xposed :: Android File Host
- AOKP v0.70 beta
- AOKP :: GDrive Link
- Xposed :: GDrive Link
- AOKP v0.60 beta
- AOKP :: GDrive Link
- Xposed :: GDrive Link
- AOKP v0.50 beta
- AOKP :: GDrive Link
- Xposed :: GDrive Link
- AOKP v0.40 beta - GDrive:: Link
- AOKP v0.30 beta - GDrive:: Link
- AOKP v0.20 beta - GDrive:: Link
Reserved
Tips N Tricks
[*]Go to settings --> developer options --> Runtime where it says Dalvik , tap and change to ART
SMS Problems? SHOULD Fix for all ROM's
EASY WAY
Use a 3rd party SMS , MMS app I reccomend Textra from play store.
The HARDER WAY
S-Off your device
Use the latest RUU for device! (MUST BE S-Off!!)
Flash proper ROM, profit?
Screenshots!
Click them to enlarge!
Black!Jack said:
Completely justifiable. Part of the reason why my builds never come to the forums. I think some people honestly just don't have a clue as to the hours, often late into the night, that it takes to compile and debug.
There is so much to learn. Every time you think you have something figured out, you suddenly realize how much you don't know.
Much respect to you and your efforts @brotherross! Also happy to see you put something together @Techinstein!
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
True I did this in one night stayed up until 3:00 am. But I am glad I finally got my first rom done and the fact it is AOKP on 4.4.2 kitkat and I plan to update it and maintain it regularly.
@ all, try to keep the discussion on track with the OP, please. I cleaned out what I considered off topic. And OP, you can't delete posts, but you can report your post or PM a moderator of this section to do it for you.
PonsAsinorem said:
@ all, try to keep the discussion on track with the OP, please. I cleaned out what I considered off topic. And OP, you can't delete posts, but you can report your post or PM a moderator of this section to do it for you.
Click to expand...
Click to collapse
Thanks PonsAsinorem, i will definitly report to you if it gets cluttered with worthless posts, thanks.
God!!! There's ROM in this forum :thumbup:
Sent from my One X using XDA Premium 4 mobile app
kemihansome said:
God!!! Three ROM in this forum :thumbup:
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes,
You should try it and tell me how you like it.
Read the note on the download to get V4Audio working. >.-
Oh man, the Evita came back to life with a bang this last week. Looking forward to this rom! Congrats Techinstein, brotherross and all the other devs for this comeback!
Cheers OP.
Sent from my One X
I don't know what to try...too many ROM (good problem)
You finally did it ! Good job!!!
Sent from my One X using Tapatalk
themacman1000 said:
Oh man, the Evita came back to life with a bang this last week. Looking forward to this rom! Congrats Techinstein, brotherross and all the other devs for this comeback!
Cheers OP.
Sent from my One X
Click to expand...
Click to collapse
I know, ive been planning on making a rom for a while. Now I have. So many roms also came out this past week. >.-
Z1cK said:
I don't know what to try...too many ROM (good problem)
You finally did it ! Good job!!!
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
Why not try them all, I do everyone my name is in forum I have personally tried. x.x
Could you try mine though and tell me what you think, its since its my first rom, I would really appreciate feedback and bug reports. I am trying to break the rom myself so far on small wireless issue which should be fixed by next update.
Then choose your favorite and stick with that. Hopefully updating rom tomorrow but have to drive back home from mountains today. Will be working on it tonight guys. >.-
Also trying to make it official.
Techinstein said:
Why not try them all, I do everyone my name is in forum I have personally tried. x.x
Could you try mine though and tell me what you think, its since its my first rom, I would really appreciate feedback and bug reports. I am trying to break the rom myself so far on small wireless issue which should be fixed by next update.
Then choose your favorite and stick with that. Hopefully updating rom tomorrow but have to drive back home from mountains today. Will be working on it tonight guys. >.-
Also trying to make it official.
Click to expand...
Click to collapse
It's sure!!! I will try it real soon !! I love to try them all too. :thumbup:
Sent from my One X using Tapatalk
Well congratulations @Techinstein for bringing another Rom to our phone. I don't think most folks realize the work involved and the time it takes to accomplish this feat. It takes a lot of fortitude and courage to put forth a product that is paid for by thank yous and recognition alone. The fact that it runs and just requires minor fixing and tweaking is a testament to the dedication of the builder.
I have a few Roms ahead of this to check out but I will definitely grab the next build and check it out. I'm still putting together a check sheet for testing Roms so I can be as objective and accurate as possible.
Anyway, thanks for your hard work and helping to keep our phone on the map!
@Techinstein, I'm impressed !! It seems really stable so far. I really like the quick settings AOKP's way and the new double click volume up and down to toggle screen rotation! I will test drive it furthermore and report.
Good job and keep up !!
Z1cK said:
@Techinstein, I'm impressed !! It seems really stable so far. I really like the quick settings AOKP's way and the new double click volume up and down to toggle screen rotation! I will test drive it furthermore and report.
Good job and keep up !!
Click to expand...
Click to collapse
@Z1cK now nightlies..
I will do nightlies when I dont have school. Every other nightlies when I have school, unless i have time.
Update coming tonight, now Pure AOKP on v 0.20. No cm base on v0.20
Please share with other evita users and reccommend this rom if you like it. Mabye make a link clickable signature to all roms and all devices/roms you use for those devices even if they are not mine. I do the same.
Happy new years to all!!
Techinstein said:
@Z1cK now nightlies..
I will do nightlies when I dont have school. Every other nightlies when I have school, unless i have time.
Update coming tonight, now Pure AOKP on v 0.20. No cm base on v0.20
Please share with other evita users and reccommend this rom if you like it. Mabye make a link clickable signature to all roms and all devices/roms you use for those devices even if they are not mine. I do the same.
Happy new years to all!!
Click to expand...
Click to collapse
Glad to hear that. I prefer aokp rather than cm !! Will stay with this ROM I guess.
Z1cK said:
Glad to hear that. I prefer aokp rather than cm !! Will stay with this ROM I guess.
Click to expand...
Click to collapse
Cool! Thanks feel free to post bugs you spot that I might not. Or if you find mods that are addable to the rom send me link and I will ask for permission. Note: If you want this to eventually be official no mods. I can keep it unofficial if you users request and continue to add approved third part mods. I plan on editing the settings UI.
@Z1cK after tonights update it should be fine to dirty flash all upcoming updates will let you know other wise. Also feel free to try Torched Kernel with it you can visit thread for Torched Kernel by click the link in the recommended section of this OP. Then download @jrior001 KitKat build for Overclocking and undercloking along with BLN (Button Light Notification) which can be enabled via Trickster Mod Kernel Settings.Of course @ all this kernel is optional. Recommended though if you want to overclock and underclock AOSP based / CM based roms.
Back your apps with - Helium play store or Titanium TI play store.
Nandroid - from TWRP if you wish.
Again @ all Happy new years, im done tonight. Some Assasins Creed 4 I think
Techinstein said:
Screenshots!
Click them to enlarge!
Click to expand...
Click to collapse
I like you fonts,can you share it for us? And thanks for you hard work.

[KERNEL][Z1C] UNOFFICIAL DooMKernel [v22][Stock KK .757/.108/.157/.270]

UNOFFICIAL DooMKernel for Xperia Z1 Compact !!!
​
Introduction:
This is an unofficial compiled from Xperia Z1 DooMKernel's sources, the only changes I have made to the original sources are:
Adjusted defconfig for the Z1C (only what was needed for it to boot in the device, the rest is unchanged)
Compiled using Ubuntu 14.04 and using the Linaro GCC 4.9.2 toolchain with Cortex-A15 optimizations
Ramdisk adjusted for the Z1C, so you get all the goodies from the original DooMKernel
Updated PhilZ Touch recovery to v6.48.4 & CWM to v6.0.5.0 & TWRP to v2.7.1.0
Requirements:
Xperia Z1 Compact
Unlocked Bootloader
Stock Sony KK firmware .757/.108 or any ROM based on it
Instructions:
Visit the Kernel's Original Thread in the Z1 forum, and make sure you read all the instructions there
THANK @DooMLoRD for his awesome job there, and for letting me build this unofficial release, Donations for him are also welcome.
[Recommended] Backup your /system partition (especially because I'm including new kernel modules)
Download the ZIP file below, and flash it in recovery, or you can extract the boot.img from the zip and flash it in fastboot mode (via flastool or command line)
Features and to do list:
The extensive list of features can be seen at the Original z1 Thread
Will try to find a way to enable T2W
Download Links:
For .270 FW:
>>>>>>>> Download DooMKernel v22 [@OPTO57's build]: ""View this Post Here"" (with atheros wireless support)
For .108 FW and above:
>>>>>>>> Download DooMKernel v22 [@sharonliu's build]: ""View this Post Here"" (with latest recoveries and toolchains)
>>>>>>>> Download DooMKernel v22 [@OPTO57's build]: ""View this Post Here"" (with atheros wireless support)
>>>>>>>> Download DooMKernel v22: ""View this Post Here"" Oct-19-2014
>>>>>>>> Download DooMKernel v21.108: ""View this Post Here"" Sep-02-2014
For .757 FW Only:
>>>>>>>> Download DooMKernel v21: Z1C-Unofficial-DooMKernel-v21.zip - 14.81 MB Jul-06-2014
>>>>>>>> Download DooMKernel v19: Z1C-Unofficial-DooMKernel-v19.zip - 12.38 MB Jun-01-2014
>>>>>>>> Download DooMKernel v18: Z1C-Unofficial-DooMKernel-v18.zip - 12.13 MB May-13-2014
>>>>>>>> Download DooMKernel v17: Z1C-Unofficial-DooMKernel-v17.zip - 12.14 MB May-09-2014
>>>>>>>> Download DooMKernel v16: Z1C-Unofficial-DooMKernel-v16.zip - 12.13 MB Apr-21-2014
To fix "permanent notification of system update" bug, use THIS
Changelog:
Version 22:
Updated kernel sources to 14.4.A.0.133
Updated kernel ramdisk to 14.4.A.0.108
Updated intelli-plug to v3.8 with all latest patches [thanks to @faux123]
Added intelli-thermal v2 [thanks to @faux123]
Updated Sound Control to v3.6 with all latest patches [thanks to @faux123]
Updated intelli-active CPU governor [thanks to @faux123]
Compiled the kernel with the latest Linaro GCC 4.9.2-2014.09 Toolchains (thanks to Christopher83)
Version 21.108:
Updated kernel sources to .108 changes (thanks to hlavicka)
Compiled the kernel with the latest Linaro GCC 4.9.2-2014.08 Toolchains (thanks to Christopher83)
Updated PhilZ Touch recovery to latest version 6.48.4 based on CWM v6.0.5.0 (thanks to [NUT])
Removed SmartAssV2 gov as it was acting like performance gov sometimes!!
Version 21:
Compiled the kernel with the new Toolchain 4.9.1 (2014-06)
Updated CWM recovery to latest version (6.0.5.0) & TWRP to latest version (2.7.1.0)
Included all new changes from DooMKernel v20 & v21
Version 19:
Added a build with the original Sony logo in my DooMKernel's Dev-Host folder (the link won't be provided anywhere, you find it)
Compiled the kernel with the new Toolchain 4.9.1 (2014-05)
Updated to last changes from Original kernel's sources
As a major change, I should mention that Voltage control is now functional in v19 (Re-enabled by DooMLoRD)
Version 18:
Updated to last changes from Original kernel's sources, which are:
Reverted and removed custom MP-Decision
Re-enabled Stock Qualcomm MSM MP-Decision driver
Added stock mpdecision binary to recovery package (this will get flashed while flashing kernel, should fix any issues which were there while testing v17 kernel)
Version 17:
2.4GHz OC should be working now
Disabled T2W code (not working and causing battery drain)
Updated to last changes from Original kernel's sources
Original kernel's changes
Version 16:
Initial release
Original kernel's changes
Extra Information:
To enter recovery, do this after seeing violet LED light:
CWM recovery: Keep tapping VOLUME UP button (or hold it)
TWRP recovery: Keep tapping VOLUME DOWN button (or hold it)
Philz recovery: Keep tapping CAMERA button (or hold it)
Good app to control most of this kernel's features: Pimp My Z1
Some features aren't working well yet, Will try to make them work in next builds
Credits:
DooMLoRD (for this amazing kernel)
[NUT] (for all recoveries)
faux123 (for many contributions)
dbolivar (I copied some parts of his threads)
OPTO57 (for atheros wireless support in last build)
And for everyone who had a hand in making this kernel better
XDA:DevDB Information
DooMKernel Kitkat - Amami, ROM for the Sony Xperia Z1 Compact
Contributors
omarainea
Source Code: https://github.com/OmarEinea/android_kernel_sony_msm8974
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Version Information
Status: Stable
Current Stable Version: v22
Stable Release Date: 2014-10-19
Created 2014-07-09
Last Updated 2015-06-20
Kernel's Sources:
You can find the original sources here:
github.com/DooMLoRD/android_kernel_sony_msm8974
And you can find my changes for Z1 Compact here:
github.com/OmarEinea/android_kernel_sony_msm8974
Damn...I am on .681 firmware. I will update my phone to .757 tomorrow cause it's too late now.Just for the record...did you solved the DT2W feature.Is it working?Thanks.
aresbv2000 said:
Damn...I am on .681 firmware. I will update my phone to .757 tomorrow cause it's too late now.Just for the record...did you solved the DT2W feature.Is it working?Thanks.
Click to expand...
Click to collapse
Hmmm, only if I compiled this kernel earlier (before merging the 757 sources) to get it work on .681
about T2W, it isn't working (as I mentioned in the "to do list"), and when I asked DoomLoRD about why isn't it working, he said:
It will depend on other touch screen driver... Not worth enabling it IMHO
Click to expand...
Click to collapse
but still I'll be working on enabling it, hopefully all I need is time
omarainea said:
...
Click to expand...
Click to collapse
OHMYGAWD! Finally a working custom kernel for our devices! It was long overdue! Big thanks to you, friend!
@t2w feature: the problem is, that the current implementation of t2w is not correct. It keeps a wakelock to check on your screen, thus preventing the device going into the deep sleep. Somebody should analyze Z2 sources to find the workaround Sony is using.
ps: I know that being greedy its bad, but still... Could you plz help @Androguide.fr porting Pimped kernel (cm based) to z1c as well? =)
TheQwertiest said:
OHMYGAWD! Finally a working custom kernel for our devices! It was long overdue! Big thanks to you, friend!
@t2w feature: the problem is, that the current implementation of t2w is not correct. It keeps a wakelock to check on your screen, thus preventing the device going into the deep sleep. Somebody should analyze Z2 sources to find the workaround Sony is using.
ps: I know that being greedy its bad, but still... Could you plz help @Androguide.fr porting Pimped kernel (cm based) to z1c as well? =)
Click to expand...
Click to collapse
Well then if that is the case, I'll rebuild the kernel tomorrow after disabling the T2W code, that should be useful until we figure out
how to actually make T2W work.
And yes I'll try my best to make pimped kernel work on our beloved device
Anyway I can flash this without the boot logo? The one that replaces the Sony logo just before Xperia. Thanks!
jenz25 said:
Anyway I can flash this without the boot logo? The one that replaces the Sony logo just before Xperia. Thanks!
Click to expand...
Click to collapse
that would be easily done if you extract the boot.img to get the zImage & initrd.img, the logo is in the initrd.img (logo.rle).
if this is hard for you to change it, I'll change it for you and pm you the link.
I would appreciate that, Sir. Thanks.
omarainea said:
that would be easily done if you extract the boot.img to get the zImage & initrd.img, the logo is in the initrd.img (logo.rle).
if this is hard for you to change it, I'll change it for you and pm you the link.
Click to expand...
Click to collapse
Please PM too with the stock logo kernel.Thank you.
Very good Antutu Benchmark score! :victory:
Nice score, did you change any setting? All I get is 31-33k
birnee said:
Nice score, did you change any setting? All I get is 31-33k
Click to expand...
Click to collapse
Disabled "mpdecision", OC-ed to 2.4Ghz and set GPU to "performance" governator.
omarainea you are the hero of the day!!
Nice one!! I suppose it's not possible to use this on Cyanogenmod?
Cheers!
e2zippo said:
Nice one!! I suppose it's not possible to use this on Cyanogenmod?
Cheers!
Click to expand...
Click to collapse
Nope, but I'll be working on compiling Pimped kernel for our Z1C which works on cm11,
hopefully I'll be able to do it soon.
omarainea said:
Nope, but I'll be working on compiling Pimped kernel for our Z1C which works on cm11,
hopefully I'll be able to do it soon.
Click to expand...
Click to collapse
You can also ask @Androguide.fr, since he has already tried porting it. Hey, he might even incorporate it in his source code, after you port it, thus making it official and freeing you from need to compile it =)
Hmm, strange, Looks like voltage control dont work, and I can "only" OC to 2,3 ghz, not 2,4ghz like the kernel should do, I am using Android Tuner for that, does it work for anybody else?
MrMmmkay said:
Hmm, strange, Looks like voltage control dont work, and I can "only" OC to 2,3 ghz, not 2,4ghz like the kernel should do, I am using Android Tuner for that, does it work for anybody else?
Click to expand...
Click to collapse
I have the same problem. It shows 2.46 but goes only to 2.26.
omegastarr said:
I have the same problem. It shows 2.46 but goes only to 2.26.
Click to expand...
Click to collapse
Do you also use Android Tuner?

[ROM][BETA][4.4.4][12 Oct][Unofficial] CarbonRom KitKat

About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. The team is composed of former members of Team Liquid who have forked the code in an attempt to bring greater speed, better coding, and full authorship to code.
Features
All of the features can be found on the site here:
Carbon Features
Here are some screenshots:
Carbon Screenshots
Carbon Updates
Join them on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join their completely open Google+ community for insider conversation with devs and other users.
Download Carbon
Carbon Downloads
Gapps can be found here
Bugs
★Same as Omni
★You tell me.
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Who is Team Carbon?
Find out here:
Carbon Team
Note
Even without having device, our developers have tried their best and helped alot to keep our device updated. If you enjoy the Rom, kindly consider them a donation, they truely deserve it.
​
XDA:DevDB Information
CarbonRom 4.4.4 Kitkat, ROM for the Samsung Galaxy R i9103
Contributors
Nikhil, karthik050782
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 4.0
Beta Release Date: 2014-10-12
Created 2014-07-23
Last Updated 2014-10-13
Credits
@Adam77Root @karthik050782 @Grarak @Flo0008
Sources
Device Tree : https://github.com/nikhilmenghani/android_device_samsung_i9103
Kernel : https://github.com/Grarak/grakernel-n1
Rom : https://github.com/carbonDev
​
Screenshots
​
FAQ​
Google Text to Speech keeps on Force Closing. What to do?
- Download and Install Google Text To Speech From Market after uninstalling existing GoogleTTS.apk.
Is it compulsory to install TWRP or Philz Recovery before installing Rom?
- Yes, if you are coming from any version lower than 4.4.
How do I install TWRP or Philz Recovery? Coming from xxx recovery! OR How do I Flash Fix file?
- Push zip file to sdcard.
- Reboot into recovery
- Flash zip file
- Reboot Recovery
MTP not working/Unable to connect to PC??
- Uncheck and recheck USB Debugging Option.
Google Search FCs. How to fix??
- See this post (Thanks to @aaa839)
I don't know what to say :victory: Thats really amazing bro Keep up this amazing work :highfive:
Everything works fine. But I can't able to move apps to SD card. Its giving pop up saying this ROM does not have app2sd feature or its broken..I redownload ROM and flashed to confirm the zip is not corrupted. But still same problem...
I just wanted to bring this to notice of devs..
Do any one have the same problem ? If so how to fix this..
Thanks in advance for your help..
I thank the devs for their hard work...:beer:
Sent from my GT-I9103 using xda premium
good job, I love this rom, thanks.
Sent from my GT-I9103 using XDA Premium 4 mobile app
Great going friend. Hope to see you in action to keep R alive in future with Karthik.:highfive::good:
I may get galaxyR from my wife... Only thing is office work.. if that is settled then i will spend time for our beloved GalaxyR..
D™ said:
Great going friend. Hope to see you in action to keep R alive in future with Karthik.:highfive::good:
Click to expand...
Click to collapse
Thanks!
Will Try my best
karthik050782 said:
I may get galaxyR from my wife... Only thing is office work.. if that is settled then i will spend time for our beloved GalaxyR..
Click to expand...
Click to collapse
You certainly will.
New Build : Download
Changelog :
Sync with Omni sources (probably includes wifi tethering fix)
Used Omni Kernel i.e. GraKernel v0.6 (because GraKernel v1.4 can be flashed explicitly)
Signal Strength bug fixed.
Many Fixes in Rom. (Sources updated to 02 Aug)
Nikhil said:
New Build : Download
Changelog :
Sync with Omni sources (probably includes wifi tethering fix)
Used Omni Kernel (because GraKernel can be flashed explicitly)
Signal Strength bug fixed.
Many Fixes in Rom. (Sources updated to 02 Aug)
Click to expand...
Click to collapse
Omni kernel = grakernel
Just an older version
Sent from my HTC D816w using XDA Free mobile app
Grarak said:
Omni kernel = grakernel
Just an older version
Sent from my HTC D816w using XDA Free mobile app
Click to expand...
Click to collapse
Edited. I hope it is correct now.
Nikhil said:
Edited. I hope it is correct now.
Click to expand...
Click to collapse
@Nikhil Major/Critical bugs:
the move to sd / phone option were missing from application tab
also all the apps no permission to installed to the sd card
this may due to the mounting points and you did not adding the 4.4 kiktat sd hot fix
just you have modified the permission.xml in system/etc/permission
Minor:
carbon rom can not in-place upgrade from omni 4.4 it
the theme choose will fc
2systemui will not started when in-place upgrade from omni4.4
(statues bar, nodification center,quick setting scroll down etc.)
what I could found the bug were above(majority sD card permission)
if you have time please fix it asap
Sent from my GT-I9103 using XDA Premium 4 mobile app
Grarak said:
Omni kernel = grakernel
Just an older version
Sent from my HTC D816w using XDA Free mobile app
Click to expand...
Click to collapse
I have a question for you in kernel section.
http://forum.xda-developers.com/showthread.php?p=54487144
@Nikhil
To add App2SD opportunity on Carbon, simply make this changes in your device tree:
https://github.com/teamp8/android_d...mmit/d1c6dce1fcb9d3f3373a91d03b59ada2bf55abf6
https://github.com/teamp8/android_d...mmit/f3a1dca45fb4023875a97f96cf3e52e0c513d447
Regards
Flo0008 said:
@Nikhil
To add App2SD opportunity on Carbon, simply make this changes in your device tree:
https://github.com/teamp8/android_d...mmit/d1c6dce1fcb9d3f3373a91d03b59ada2bf55abf6
https://github.com/teamp8/android_d...mmit/f3a1dca45fb4023875a97f96cf3e52e0c513d447
Regards
Click to expand...
Click to collapse
Thanks
I've had this changes incorporated. Trying to fix other bugs before next build.
hi all, great job ... will fix the camera, as it does not go to video mode and does not move.
Thanks for the very nice ROM. I love the ROM but Google play services and Clock crashes all the time! Can we expect a fix for these or am I missing something?
Did u clean install this ROM or you flashed over any previous .4.4 ROM ?if its not clean install. Try to wipe cache n dalvik from recovery also wipe cache and data for those app that you have issue with.. Which g-apps you use?
Good luck! :thumbup:
Sent from my GT-I9103 using xda premium

[ROM][4.4.4] CyanogenMod 12 Themed ROM for Samsung Galaxy Y

Hello! I was a little bit bored, so I made a CyanogenMod 12 likely ROM for this old device.
If coming from stock rom/CM9/CM7/CM11:
Check post #102
If coming from CM12 themed ROM's other build:
Check post #114, this is the latest build.
If upgrading this rom to it's next version:
You are in TWRP 3.0.2-1 , install the rom and you're done.
I'm not responsible for anything! If u show your middle finger at me for breaking your device, I'll laugh at you.
Works:
WiFi
Camera
Internet
Likely everything
Features:
Some invisible tweaks
Contains all the Android 5.1.1 alarm/notification sounds
Android KitKat 4.4.4 GApps can be installable ONLY
Has CM12 bootanimation
it has android 5 icons ​Credits to:
AndroidARMv6
CyanogenMod
GetuX for making kernel for this device
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Custom Recovery
Based On: CyanogenMod
Download Link with Installation Instructions: post #102
2021.12.21:
From now on, the ALPHA, and the FINAL builds are officially discontinued.
Bugs:
Nothing
anyone testing???
alpha 2 will be out soon, just testing some tweaks.
!!ALPHA 2 RELEASED!!
- Added Browser
- Made a lot of tweaks, modified Android version
- Pre-rooted
- New icons added
- can OC with the GetuX kernel over 1000+ MHz
link: alpha2link
Will add OTA server soon, so you can update over there ^^
-
!!!RELEASE 3 GOT UPLOADED!!!
You wonder.. Why isn't it alpha anymore?
Bro, because it became official ROM
!!!CHANGELOG!!!
- Added Android 5 icons,
- Added "42 Browser",
- Added a new file explorer, removed stock/CM,
- Added Android 5 shell,
- Pre-rooted,
- Added so many language
!!!THE WHOLE CHANGELOG!!!​
Code:
2021-09-27:
Initial build/release
2021-09-28:
- Added Browser
- Made a lot of tweaks, modified Android version
- Pre-rooted
- New icons added
- can OC with the GetuX kernel over 1000+ MHz
2021-09-30:
- Added Android 5 icons,
- Added "42 Browser",
- Added a new file explorer, removed stock/CM,
- Added Android 5 shell,
- Pre-rooted,
- Added so many languages
I hope you enjoy this build for now.
Twrp link not working
Latest download link not working .. it's not shared to public ...
Thanks for your work
Hi! I'm fixing that right quick.
kapetchou said:
Twrp link not working
Latest download link not working .. it's not shared to public ...
Thanks for your work
Click to expand...
Click to collapse
TWRP link has to work, it's on AFH, but here is one then: TWRP i updated the links to public too, and thank you. Have a nice day sir!
!!RELEASE 4!!
Soo, r4 didn't got a lot of features.
But i'm still happy that I can make this rom for you!
Works:
CyanogenMod 12 boot animation
WiFi
Bluetooth
Browser
And everything else...
Bugs:
Camera
RIL (for me)
And you tell me
Changelog:​
Code:
2021-09-27:
Initial build/release
2021-09-28:
- Added Browser
- Made a lot of tweaks, modified Android version
- Pre-rooted
- New icons added
- can OC with the GetuX kernel over 1000+ MHz
2021-09-30:
- Added Android 5 icons,
- Added "42 Browser",
- Added a new file explorer, removed stock/CM,
- Added Android 5 shell,
- Pre-rooted,
- Added so many languages
2021-10-01:
- Fixed the CyanogenMod 12 bootanimation
- Added Android 5 easteregg
My ways:
- Add CM12 bootanim - done!
- Add android 5 easteregg - done!
- Add Android 5 wallpaper - ???
- Add Android 5 icons, shell - done!
link: release4
notnoelchannel said:
anyone testing???
Click to expand...
Click to collapse
First make it downloadable link Is not working
I have already made a cm12 themed rom I can help you out wanna team up?
Ragedpixel said:
First make it downloadable link Is not working
Click to expand...
Click to collapse
i'll upload the "builds" later to my own website and make nightly builds too, it makes me much easier to detect the bugs
notnoelchannel said:
i'll upload the "builds" later to my own website and make nightly builds too, it makes me much easier to detect the bugs
Click to expand...
Click to collapse
ok XD Make those "BUILDS"
notnoelchannel said:
Hello! I was a little bit bored, so I made a CyanogenMod 12 likely ROM for this old device.
If coming from stock rom:
Flash the temporary CWM Recovery
Then flash the gaven TWRP recovery
And reboot to recovery
Wipe data / factory reset
Wipe cache partition
Format /system, mount /system, /data
And install the ROM
(Optional) flash the kernel
If coming from CM11/9/7:
Simply flash the rom over TWRP and if you want flash the kernel too, but factory reset and a cache is recommended.
If upgrading this rom to its next version:
Don't be scared if you see CWM. It's integrated in the rom. And just flash the rom, your data will be safe and saved.
I'm not responsible for anything! If u show your middle finger at me for breaking your device, I'll laugh at you.
Works:
WiFi
Camera
Internet
Likely everything
Features:
Some invisible tweaks
Contains all the Android 5.1.1 alarm/notification sounds
Android KitKat 4.4.4 GApps can be installable
Can Overclock (ALPHA2)
Has CM12 bootanimation
it has android 5 icons ​Credits to:
AndroidARMv6
CyanogenMod
GetuX for making kernel for this device
ROM OS Version: 4.4.x Jelly Bean
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Custom Recovery
Based On: CyanogenMod
Alpha1 link: alpha1link
Alpha2 link: alpha2
Release3: Release3
Latest: Latest ROM
Temp CWM link: CWM recovery
TWRP: this good
If you wanna use a custom kernel for this: GetuX kernel
2020-10-03:
Updated the ROM links for my own site.
If you get random numbers remove them..
I hope a 13 year old who has autism, beginning developer made your day happy with this.. if yes please leave a thank :')
Click to expand...
Click to collapse
This is not a cm12 rom, its just a cm11 with a skin. i recommend you to change the name of the thread to cm11 with material design of cm12, also 4.4.x is not jelly bean.
raphaelgamer981 said:
This is not a cm12 rom, its just a cm11 with a skin. i recommend you to change the name of the thread to cm11 with material design of cm12, also 4.4.x is not jelly bean.
Click to expand...
Click to collapse
thx for the idea, I changed it!
notnoelchannel said:
thx for the idea, I changed it!
Click to expand...
Click to collapse
Nice
soonly uploading a new """build""" because the thread has been dead, not active

Categories

Resources