Hi,
Please check attached images, I need replace those parts from my S4 i9500. From google search there are replacement parts available. I can't able to post link.
but how can I able to put LCD back from the damaged housing to the replacement part. Is that possible.
If for example I'll find the better housing. can I able to put all the rest parts back into front panel and middle frame? why I am asking because I've seen on some screen replacement videos on you tube, they cannot able to replace just front panel frame and put back old LCD.
Please write me complete details if possible, then I'll buy the frames.
Thank you.
It's a part of the lcd display and nearly impossible to replace without damaging the display.
You can find the complete front panel assembly on ebay for about 180 dollars.
Rakcoon said:
It's a part of the lcd display and nearly impossible to replace without damaging the display.
You can find the complete front panel assembly on ebay for about 180 dollars.
Click to expand...
Click to collapse
ops, thanks for reply that's what I was thinking as well.
Thumbstarrepair.com
DieselDawg
Related
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
ferrari373 said:
Hello,
I just bought a touch screen for diamond and i am wondering to know if i can replace it without replace the lcd screen!!!
Click to expand...
Click to collapse
I have replaced several screens on Touch Diamonds, however the LCD matrix appears to actually be stuck onto the digitiser and the LCD itself is very very fragile. I usually replace the whole unit (LCD screen and digitiser) because it is much easier. You can purchase these from various sellers in Hong Kong on Ebay.
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
ferrari373 said:
I have allready bought a touch screen but not the lcd screen!!! Do u have a guide or something that shows how to change it???
Click to expand...
Click to collapse
My recommendation would be to re-sell the touch screen and buy yourself a complete LCD & digitiser module. It is much much easier to do. In terms of taking the phone apart, it is fairly straight forward. Be careful with the small co-axial cables inside though, because they are easily damaged and difficult to obtain without replacing the antenna board. Re-connecting the ribbon cables can also be a bit fiddly.
The LCD and digitiser are glued into the front of the phone. You will need to disassemble the phone and then very carefully using a plastic flat blade, ease the LCD out of the front of the phone housing. It will come out with a little bit of care. There should be enough glue remaining in the housing to re-seat the replacement unit and hold it in place.
If you google you should be able to find the HTC Diamond service manual which tells you how to take the phone apart and re-assemble it. I have a copy, so if you can't track it down, PM and I will e-mail it to you.
Andy
Hi,
To barncourt, how is the build quality of those honk kong made screens?
also a lot of the screen+digitizer that i have seen on ebay all have the front facing camera. would it be possible to use that screen even though my diamond is the one that has no front facing camera?
Of course, it is just a hole
p.brazauskas said:
Hi,
To barncourt, how is the build quality of those honk kong made screens?
Click to expand...
Click to collapse
Okay, but I tend to buy from the same seller. Not had any particular problems.
barncourt said:
Okay, but I tend to buy from the same seller. Not had any particular problems.
Click to expand...
Click to collapse
Hi I wanna know can you share your supplier adress with us ?
I'm looking for a LCD+digitizer and what I see is not something giving confidence...
So if you can give us some real-tested place to start...
Also I've dismantle the phone but it's quite hard to take the screen+digitizer away...
it's seems completely fixed with the housing does some one got s pics or guide on how to dismantle and replace the screen
(The HTC service guide you can see here and there just don't deal with the screen.)
and when I started just broke my screen (which was already broken anyway so...)
http://www.fuelip.com/howto/diamondlcd/diamondlcd.htm
I followed that guide and replaced my screen. I have one last problem though - I can't fit back my power button. It's made of two parts the black plastic cover and the transparent rubber. How do you stick them together? I'ts funny that I took my whole diamond apart with all the cables and boards and now I can not figure out how to fix a silly button
Hello folks, first time on these forums.
The glass on my nexus 5 has cracked, but is completely functional. No screen distortion or damage to lower screen components. I have searched for this issue but could only find videos on how to replace the whole screen assembly. I found a replacement screen on eBay for 8.00 which is JUST the glass.
I am wondering if it is possible to replace just the glass plate and not the LCD or digitizer?
Thanks for the help!
I'll be the first to chime in here. The main reason you don't want to replace just the glass I would say is the amount of time and effort you have to put into it to remove it since it is glued directly to the LCD and there is a chance if ruining the LCD I would just replace the whole thing it is faster and much easier I get my parts from etradesupply.com
kvillafana said:
I'll be the first to chime in here. The main reason you don't want to replace just the glass I would say is the amount of time and effort you have to put into it to remove it since it is glued directly to the LCD and there is a chance if ruining the LCD I would just replace the whole thing it is faster and much easier I get my parts from etradesupply.com
Click to expand...
Click to collapse
This seems to be the general consensus. Thanks for the response.
Dear All,
I have my old trusty Nexus 5 lying around and I want to give it to a friend who has been without a phone for months.
The only issue is that the housing is in tatters, the power button became stuck first, then the sides of the phone by the volume buttons cracked and the buttons wore down on the inside and stuck on the volume down setting aswell.
If it is going to be in any shape to give to someone I need to replace the housing and possibly the battery as I had it for 4 years at the time I replaced it so I am certain the battery should be replaced.
Do you guys know what parts I would need to replace the housing+buttons+battery? I am flying blind here as all I see are Back covers and Digitizers on Amazon and Ebay.
I am pretty sure I can repair it myself once I can get the right parts to achieve the goal in mind.
Would very much appreciate your help and guidance.
Being a mother is hard so I'd like to ease her a bit by doing something nice.
Thanks in advance.
It may be simpler to by the LCD and frame as a pre-assembled unit; however, some third party screens do not support auto brightness and/or may not look as good as the original.
To replace the frame, you have to carefully separate the LCD from the frame.
Here's an example of the frame on eBay: https://www.ebay.ca/itm/For-LG-Goog...180298?hash=item2ca6092d4a:g:4~UAAOSw5IJWd6eA
Volume buttons: https://www.ebay.ca/itm/POWER-SIDE-...476417?hash=item541d0a7101:g:1q8AAOSwMmBVrK~9
audit13 said:
It may be simpler to by the LCD and frame as a pre-assembled unit; however, some third party screens do not support auto brightness and/or may not look as good as the original.
To replace the frame, you have to carefully separate the LCD from the frame.
Click to expand...
Click to collapse
Hey thanks alot, do you have any recommendations for the LCD Frame combo? the ones I saw on Amazon are...less than inspiring. I'm assuming nowhere sells OEM parts for that at this point right?
I know of no place that sells the oem lcd and frame anymore. The phone is considered quite old the "cellular" world, unfortunately.
Maybe find a used Nexus 5 with damaged internals and a working screen?
After 3 wonderful years of enjoying this device, I finally dropped it in a way that cracked just the front glass that protects the screen unit itself, in the corner near the Camera. Although *everything works 100%* and this damage is merely cosmetic, I want to replace the glass since it is what protects the screen itself.
Does anyone know where I can buy just the glass that protects the screen?
Many thanks!
Please use the QUOTE feature when replying to me to get my attention. Thanks!
PLEASE make me happy and tell me this is all I need? And if so, is it OEM or the same quality as OEM?
Vecmnoday 7.0'' For Huawei Honor X2 MediaPad X2 Touch Screen Digitizer Sensor Glass Panel Tools
http://s.aliexpress.com/meaYziU3?fromSns=Copy to clipboard
(from AliExpress Android)
Please use the QUOTE feature when replying to me to get my attention. Thanks!
E--Man said:
PLEASE make me happy and tell me this is all I need? And if so, is it OEM or the same quality as OEM?
Vecmnoday 7.0'' For Huawei Honor X2 MediaPad X2 Touch Screen Digitizer Sensor Glass Panel Tools
http://s.aliexpress.com/meaYziU3?fromSns=Copy to clipboard
(from AliExpress Android)
Please use the QUOTE feature when replying to me to get my attention. Thanks!
Click to expand...
Click to collapse
If I were you I'd buy the screen/glass together as it's nearly impossible to remove the front glass from the screen itself. I just replaced one in a Mate 9, ordering the assembly is way easier.
https://www.aliexpress.com/item/New-For-Huawei-Honor-X2-MediaPad-X2-GEM-703L-LCD-Display-Touch-Screen-Digitizer-Glass-Sensor/32839520838.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10151_10065_10344_10130_10068_10324_10342_10547_10325_10343_10546_10340_10548_10341_10545_10084_10083_10618_10630_10307_10313_10059_10534_100031_10103_10627_10626_10624_10623_10622_10621_10620_10142,searchweb201603_25,ppcSwitch_5&algo_expid=d8f4e1ef-82ea-4ed4-a3f5-4b7a32054d5e-0&algo_pvid=d8f4e1ef-82ea-4ed4-a3f5-4b7a32054d5e&priceBeautifyAB=0
ajsmsg78 said:
If I were you I'd buy the screen/glass together as it's nearly impossible to remove the front glass from the screen itself. I just replaced one in a Mate 9, ordering the assembly is way easier.
https://www.aliexpress.com/item/New...82ea-4ed4-a3f5-4b7a32054d5e&priceBeautifyAB=0
Click to expand...
Click to collapse
Hi AJ, thanks again for your quick reply and good advice. I did some research about what you are saying in that it is definitely a difficult endeavor to successfully separate the glass from the LCD without damaging it and indeed it seems you are correct based on how easy it is to destroy the LCD as the following YouTube video so perfectly demonstrates - it is definitely worth checking it out.
Quick question, is the glass and the LCD on the X2 glued in the ENTIRE screen area just like the Samsung's are as in the YouTube video, OR, is it just the double-sided tape that is used AROUND the LCD and no glue in the middle of the screen? If the X2 uses just the double-sided tape *AROUND* the LCD then maybe getting just the glass would work, but if it is glued uniformly like the YouTube then definitely better to get the whole assembly in your link with LCD and glass together.
I'm just worried about the replacement LCD being not as good as the one I have now in terms of quality!
Thanks.
YOUTUBE VIDEO:
https://youtu.be/SJ05sPZDeR8
@Moxybul @kwenteen @mixterz @RayfG
Please use the QUOTE feature when replying to me to get my attention. Thanks!
E--Man said:
Hi AJ, thanks again for your quick reply and good advice. I did some research about what you are saying in that it is definitely a difficult endeavor to successfully separate the glass from the LCD without damaging it and indeed it seems you are correct based on how easy it is to destroy the LCD as the following YouTube video so perfectly demonstrates - it is definitely worth checking it out.
Quick question, is the glass and the LCD on the X2 glued in the ENTIRE screen area just like the Samsung's are as in the YouTube video, OR, is it just the double-sided tape that is used AROUND the LCD and no glue in the middle of the screen? If the X2 uses just the double-sided tape *AROUND* the LCD then maybe getting just the glass would work, but if it is glued uniformly like the YouTube then definitely better to get the whole assembly in your link with LCD and glass together.
I'm just worried about the replacement LCD being not as good as the one I have now in terms of quality!
Thanks.
YOUTUBE VIDEO:
https://youtu.be/SJ05sPZDeR8
@Moxybul @kwenteen @mixterz @RayfG
Please use the QUOTE feature when replying to me to get my attention. Thanks!
Click to expand...
Click to collapse
They use loca glue to glue the front glass to the screen. Same with the Mate 9.
E--Man said:
Hi AJ, thanks again for your quick reply and good advice. I did some research about what you are saying in that it is definitely a difficult endeavor to successfully separate the glass from the LCD without damaging it and indeed it seems you are correct based on how easy it is to destroy the LCD as the following YouTube video so perfectly demonstrates - it is definitely worth checking it out.
Quick question, is the glass and the LCD on the X2 glued in the ENTIRE screen area just like the Samsung's are as in the YouTube video, OR, is it just the double-sided tape that is used AROUND the LCD and no glue in the middle of the screen? If the X2 uses just the double-sided tape *AROUND* the LCD then maybe getting just the glass would work, but if it is glued uniformly like the YouTube then definitely better to get the whole assembly in your link with LCD and glass together.
I'm just worried about the replacement LCD being not as good as the one I have now in terms of quality!
Thanks.
YOUTUBE VIDEO:
https://youtu.be/SJ05sPZDeR8
@Moxybul @kwenteen @mixterz @RayfG
Please use the QUOTE feature when replying to me to get my attention. Thanks!
Click to expand...
Click to collapse
I think I may take the plunge and buy one of these:
https://www.amazon.com/Vivo-Plus-64GB-6-43-Recognition/dp/B077SVJZMW
It's cheaper on eBay, around $440.
ajsmsg78 said:
I think I may take the plunge and buy one of these:
https://www.amazon.com/Vivo-Plus-64GB-6-43-Recognition/dp/B077SVJZMW
It's cheaper on eBay, around $440.
Click to expand...
Click to collapse
Hi AJ the device looks OK but I prefer a battery higher capacity and at least 5000mAh vs this device at 3900mAh.
Also, the screen is slightly smaller at 6.43in vs X2 at 7in but this is not a deal breaker.
Please use the QUOTE feature when replying to me to get my attention. Thanks!
Hi,
Can someone please comment on the quality of these LCD screens for the X2 on AliExpress and whether certain ones should be avoided in terms of originality/quality and overall result?
Looking at the following (see below) items for sale on AliExpress I notice that:
1. They look to be aftermarket and not OEM original part. Will the image look as good?
2. The resolution stated in the item description is 1920x1080 but when I go to my phone menu in Settings->About Phone, it says my resolution is 1920x1200 which is better than 1080. Is this relevant?
Items from AliExpress:
1. http://s.aliexpress.com/36VneYby
2. http://s.aliexpress.com/FJzQjQZF
3. http://s.aliexpress.com/J3IfMNje
4. http://s.aliexpress.com/MbUZ7zUj
5. http://s.aliexpress.com/yuyqErU7
There are a few more but I just pasted a few here. If you know a better one around same price please let me know!
Thanks.
@ajsmsg78 @Moxybul @kwenteen @mixterz @RayfG
Please use the QUOTE feature when replying to me to get my attention. Thanks!
Yeah, don't even bother trying to remove the glass - I did and it totally screwed the panel. I've still got the replacement glass if you really want to try! Just buy a complete screen, they're cheap as chips.
I bought this one and it's perfect -
https://www.ebay.de/itm/263278383020
My X2 died in a motorbike crash, seems I landed on the poor thing. Screen glass was totally shattered but the damn thing was still 100% working till I tried to replace the glass .
E--Man said:
Hi,
Can someone please comment on the quality of these LCD screens for the X2 on AliExpress and whether certain ones should be avoided in terms of originality/quality and overall result?
Looking at the following (see below) items for sale on AliExpress I notice that:
1. They look to be aftermarket and not OEM original part. Will the image look as good?
2. The resolution stated in the item description is 1920x1080 but when I go to my phone menu in Settings->About Phone, it says my resolution is 1920x1200 which is better than 1080. Is this relevant?
Items from AliExpress:
1. http://s.aliexpress.com/36VneYby
2. http://s.aliexpress.com/FJzQjQZF
3. http://s.aliexpress.com/J3IfMNje
4. http://s.aliexpress.com/MbUZ7zUj
5. http://s.aliexpress.com/yuyqErU7
There are a few more but I just pasted a few here. If you know a better one around same price please let me know!
Thanks.
@ajsmsg78 @Moxybul @kwenteen @mixterz @RayfG
Please use the QUOTE feature when replying to me to get my attention. Thanks!
Click to expand...
Click to collapse
I've ordered Mate 9 screens from Aliexpress and they are hit and miss. The first one I ordered was perfect. The second one wasn't glued well and wasn't as bright and clear and I ended exchanging it for another one which was fine.
The seller has the resolution listed incorrectly.
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
SolarisSixth said:
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
Click to expand...
Click to collapse
According to this: Ali Express
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the LCD image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
According to that; If the glass is cracked, I only need the Digitizer replaced.
I am happy to get the whole thing, its just I have already ordered a Digitizer and thought this was all I needed. I could be wrong.
Any recommendation on the type of screen I should purchase for best results?
Ali Express Search
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi there
I got the same Problem. Screen and Touch and everything is OK. Did you manage to replace the broken glas? Was the Ebay thing okei or did u buy something different?
Cheers
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Any update on this? I'm in the same situation, front glass is cracked but phone otherwise fine. Replacement is only $10, but can just the glass even be replaced?
I just bought the whole LCD/Digitizer for $60, not even going to attempt to separate just the glass
emanuel.caesar said:
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Click to expand...
Click to collapse
Hey emanuel.caesar,
thanks for your helpful post. A few further questions from my side:
which lcd did you choose exactly? Are you still satisfied with the quality? And the last question Does the video guide for the Mi Mix 2 work for the Mi Mix 2s as well or are many things different? Thank you in advance for a short reply.
Hello,
Is not a good idea to try to just replace de LCD screen. I did this operation many times in the past and I can confirm that's a long operation (~1h30), there's a lot of risks that you break the digitizer and for a good result, you need LCD glue and a UV machine.
So, I think it's a better idea to replace all the screen: LCD + Digitizer.
Any suggested YouTube videos to replace the glass + LCD + digitizer?
Looking at a used phone with broken glass. It's like $10 for glass or $32 for the whole set and if I recall last time I had glass swapped it was like $60 labor and no guarantee the LCD wouldn't break. I'm pretty technical have repaired plenty of phones Android and iPhone. Anyone have a good link for removing the LCD / digitizer / glass unit? Is this like the Samsung where you need to use a blow dryer to heat the adhesive to get it off? Or like an iPhone where you just take screws out and pry the panel out? Much appreciated