Related
Hello all,
I rooted my HTC One XL a couple weeks back, installed CM10 (all was working fine), and in the process of installing the latest CM10 nightly, something went wrong. Flashed boot.img, then rom, then gapps. Wiped cache and dalvic cache, asked TWRP to restart system. This is where it's stuck now. It won't go past the htc logo, and I can't get into the bootloader by holding down power+vol down.
What did I do wrong? Is this fixable? Any help is greatly appreciated!
H8rift is working on a solution right now. If you can flash back to a backup? I would do so.
Sent from my One X using xda premium
---------- Post added at 10:52 PM ---------- Previous post was at 10:51 PM ----------
You can't get into recovery?
Sent from my One X using xda premium
vowelsounds said:
Hello all,
I rooted my HTC One XL a couple weeks back, installed CM10 (all was working fine), and in the process of installing the latest CM10 nightly, something went wrong. Flashed boot.img, then rom, then gapps. Wiped cache and dalvic cache, asked TWRP to restart system. This is where it's stuck now. It won't go past the htc logo, and I can't get into the bootloader by holding down power+vol down.
What did I do wrong? Is this fixable? Any help is greatly appreciated!
Click to expand...
Click to collapse
First off, can you get into TWRP, and do you have a backups of the time before you flashed the rom. When you hold power+vol down are you holding power until the home back and kill app buttons flash 6 times then release and hold vol down around 7 seconds till you see the screen with android skateboarders(Bootloader)
Second, I think their is a kit (Hasoons) Which you can try to boot you into bootloader or twrp recovery. But if your phone powers on, then i think your device is not a paperweight yet so dont worry to much as i think it can be fixed.
vowelsounds said:
Hello all,
I rooted my HTC One XL a couple weeks back, installed CM10 (all was working fine), and in the process of installing the latest CM10 nightly, something went wrong. Flashed boot.img, then rom, then gapps. Wiped cache and dalvic cache, asked TWRP to restart system. This is where it's stuck now. It won't go past the htc logo, and I can't get into the bootloader by holding down power+vol down.
What did I do wrong? Is this fixable? Any help is greatly appreciated!
Click to expand...
Click to collapse
It is fixable.
I did the same thing with my phone. Now I am successfully running ViperXL 2.1.2
Are you able to "fastboot oem lock" from the fastboot cmd prompt?
WhatTheAndroid? said:
First off, can you get into TWRP, and do you have a backups of the time before you flashed the rom. When you hold power+vol down are you holding power until the home back and kill app buttons flash 6 times then release and hold vol down around 7 seconds till you see the screen with android skateboarders(Bootloader)
Second, I think their is a kit (Hasoons) Which you can try to boot you into bootloader or twrp recovery. But if your phone powers on, then i think your device is not a paperweight yet so dont worry to much as i think it can be fixed.
Click to expand...
Click to collapse
I can't get into TWRP, and I have backups on the device. I am sorry for being a dummy, but you're saying the manual way to enter the boot loader is to hold power+voldown for 6 flashes, then release the power button but hold the voldown for 7 more seconds? I've just been holding down both for the full 15 flashes. I am going to look up Hasoons rn.
THANKS!!
vowelsounds said:
I can't get into TWRP, and I have backups on the device. I am sorry for being a dummy, but you're saying the manual way to enter the boot loader is to hold power+voldown for 6 flashes, then release the power button but hold the voldown for 7 more seconds? I've just been holding down both for the full 15 flashes. I am going to look up Hasoons rn.
THANKS!!
Click to expand...
Click to collapse
You are supposed to hold Power and Volume Down until the screen shuts off, then let go of power and continue holding volume down
vowelsounds said:
I can't get into TWRP, and I have backups on the device. I am sorry for being a dummy, but you're saying the manual way to enter the boot loader is to hold power+voldown for 6 flashes, then release the power button but hold the voldown for 7 more seconds? I've just been holding down both for the full 15 flashes. I am going to look up Hasoons rn.
THANKS!!
Click to expand...
Click to collapse
So your saying you can't get into bootloader but, you got into TWRP?
The correct way to get into bootloader is hold power+vol down until screen goes off, then release power button.
If that doesn't work you can try to open bootloader through the fastboot cmd prompt.(if you ahve Win7 just open the file where fastboot is, hold shift+right click and you can open the prompt from there)
Myrder said:
It is fixable.
I did the same thing with my phone. Now I am successfully running ViperXL 2.1.2
Are you able to "fastboot oem lock" from the fastboot cmd prompt?
Click to expand...
Click to collapse
Just tried this, cmd prompt reads "waiting for device". I am glad to know someone else got out of this :/
absolutelygrim said:
You are supposed to hold Power and Volume Down until the screen shuts off, then let go of power and continue holding volume down
Click to expand...
Click to collapse
What he said, but after your phone powers off, when i held it for around 7 more seconds, it booted into bootloader when i did it .But try both methods.I was stuck in a bootloop as well, you will be fine. I forgot commands for fastboot, but if anyone wants to tell them to him he could prob get into fastboot by command prompt mabye?
vowelsounds said:
Just tried this, cmd prompt reads "waiting for device". I am glad to know someone else got out of this :/
Click to expand...
Click to collapse
type "fastboot devices"
your serial number should be on the screen if fastboot recognizes your phone. but I was always able to get into bootloader through commands on the phone.
Also, I can't thank Absolutelygrim and a few others whom I can't think of their names for helping me out of that situation.
ANYTHING Absolutelygrim says, I would listen and take note.
Myrder said:
So your saying you can't get into bootloader but, you got into TWRP?
The correct way to get into bootloader is hold power+vol down for 6 flashes, then release power button.
If that doesn't work you can try to open bootloader through the fastboot cmd prompt.(if you ahve Win7 just open the file where fastboot is, hold shift+right click and you can open the prompt from there)
Click to expand...
Click to collapse
No I couldn't get into either, but I just did the power+voldown until screen off then hold vol down thing, and I got into bootloader and from there to recovery. I am going to flash a backup &c &c...
You people are so amazing!! Saved my life! Thank you, Thank you, Thank you, Thank you!
vowelsounds said:
No I couldn't get into either, but I just did the power+voldown until screen off then hold vol down thing, and I got into bootloader and from there to recovery. I am going to flash a backup &c &c...
You people are so amazing!! Saved my life! Thank you, Thank you, Thank you, Thank you!
Click to expand...
Click to collapse
Glad your device is back, good job. Hope i helped.
vowelsounds said:
No I couldn't get into either, but I just did the power+voldown until screen off then hold vol down thing, and I got into bootloader and from there to recovery. I am going to flash a backup &c &c...
You people are so amazing!! Saved my life! Thank you, Thank you, Thank you, Thank you!
Click to expand...
Click to collapse
Is there a way to close a thread? I've never done this before :/
Thanks to all of you again!
vowelsounds said:
No I couldn't get into either, but I just did the power+voldown until screen off then hold vol down thing, and I got into bootloader and from there to recovery. I am going to flash a backup &c &c...
You people are so amazing!! Saved my life! Thank you, Thank you, Thank you, Thank you!
Click to expand...
Click to collapse
It's always best to Nandroid before you flash a ROM.
I didn't and I almost made my phone into a very expensive paperweight. Thank god for RUUs.
I also tried to flash a ROM that was for the international version and not the XL which is our phone.
Mods will eventually Close it, just ingnore the thread and it will be closed soon.
If you want to, I know posting a thread in here can amount to a long wait time, just shoot me a PM and I'll give you my email. I get that directly to my phone so I'll be able to reply a lot quicker.
I have the same problem as this guy, but when I hol the volume down button, it has no effect... I hold vol down and power, lights flash 15 times, I keep holding volume down while phone reboots, but no matter how long I hold it down, it just stays at the HTC legal screen.
Was running CM 10.0, and updated to 10.1 (9-3-2012 nightly) with 3-03-2013 GAPPS, via TWRP. Made a backup before flash, Installed both the zips succefully, pressed reboot, and now it doesn't get past the legal screen, and no button pressing is getting me back to TWRP =(
I replaced the screen once, and the volume buttons behaved differently after I re-assembled. Both the buttons work, but they act differently. Pressing vol down or vol up both bring up the volume dialog, but instead of increasing or decreasing the amount, it swtiches between mute and non mute. So I'm thinking the button is not actually doing a 'volume down' action. Any thoughts?
AND, how do you actually turn this device off? It keeps turning itself back on after the 15 flashes.
Thanks for any help.
new developer need 10 posts in general discussion sry
I tried getting to the bootloader screen on my HTC One M8. I turned it off, wait 5 seconds, then hold power down, and press power for 2-3 seconds, while still holding volume down. It never gets to the bootloader screen. It always does a regular boot.
Don't know if this matters, but I did root with WeakSauce successfully.
adb reboot bootloader
oneandroidnut said:
adb reboot bootloader
Click to expand...
Click to collapse
Haven't tried that yet. So there's no way to do it without plugging in to a PC? I thought it should work on the device too.
itkowitz said:
Haven't tried that yet. So there's no way to do it without plugging in to a PC? I thought it should work on the device too.
Click to expand...
Click to collapse
I believe you have to turn off fast boot in Settings->Power and then you can do it by holding the volume down and power buttons at the same time.
shortstuff_mt said:
I believe you have to turn off fast boot in Settings->Power and then you can do it by holding the volume down and power buttons at the same time.
Click to expand...
Click to collapse
That worked! Thanks.
Working............ Thanks
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...
Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button
Ok i unlocked my metro stylo4 and have been trying to root for the past few days...followinf the instructions on rooting with magisk, ive downloaded the apk and im supposed to install in recovery mode but my phone wont go into recovery now...all it will do is factory reset. Im holding down vol and power at same time then releasing and pressing power again when lg logo appears...what happened??
youe phone vibrate when booting up? release pressing power when it vibrate and keep holding VOL+ you don't need to wait for the logo
ineedroot69 said:
youe phone vibrate when booting up? release pressing power when it vibrate and keep holding VOL+ you don't need to wait for the logo
Click to expand...
Click to collapse
Ues it vibrates on startup
Blitzd187 said:
Ues it vibrates on startup
Click to expand...
Click to collapse
your phone is LG?
I did that and it brought me ton fastboot mode where i couldnt do anything and had to hard restart ...im bout to just give up...this apparently isnt for me
Blitzd187 said:
I did that and it brought me ton fastboot mode where i couldnt do anything and had to hard restart ...im bout to just give up...this apparently isnt for me
Click to expand...
Click to collapse
answer me is your phone LG?
apparently for
LG Stylo™ 4 | Metro by T-Mobile it is not VOL+ ... you should be pressing VOL- for recovery mode
I believe thats what i posted
Blitzd187 said:
I believe thats what i posted
Click to expand...
Click to collapse
you didn't indicate either VOL+ or VOL- your pressing anyway
ineedroot69 said:
you didn't indicate either VOL+ or VOL- your pressing anyway
Click to expand...
Click to collapse
You missread my post then..guess ill take some fault for not wording it correctly
Blitzd187 said:
You missread my post then..guess ill take some fault for not wording it correctly
Click to expand...
Click to collapse
Still doesnt goninto recovery though
ineedroot69 said:
apparently for
LG Stylo™ 4 | Metro by T-Mobileit is not VOL+ ... you should be pressing VOL- for recovery mode
Click to expand...
Click to collapse
ineedroot69 said:
you didn't indicate either VOL+ or VOL- your pressing anyway
Click to expand...
Click to collapse
Doesnt do that on mine..if i continually hold both buttons it constantly restarts my phone
ineedroot69 said:
apparently for
LG Stylo™ 4 | Metro by T-Mobileit is not VOL+ ... you should be pressing VOL- for recovery have not mentioned anything in my posts about pressing vol+...why keep stressing on it
Click to expand...
Click to collapse
Alright im out this guya not listening nor paying attention to my posts...just keeps repeating the same things over and over...excellent help sir...
Blitzd187 said:
Alright im out this guya not listening nor paying attention to my posts...just keeps repeating the same things over and over...excellent help sir...
Click to expand...
Click to collapse
you're welcome glad i could help