Database Info

FIXED: One Solution on how to replace a broken Camera Glass Cover on SG3

So I stupidly had my case off my phone and dropped my phone taking it out of my pocket. It didn't drop that far but dropped just far enough to crack the glass covering the camera lens. So I needed to find a way to fix the cracked camera cover, preferably without much cost. I had no insurance and didn't buy through Verizon or a store.
Possible Options:
1. Having Samsung fix it. Would have to send it to them, would cost at least $70 plus, but possibly more. Would most likely be without the phone for 3 weeks (my guess). And they would wipe my phone and set it back to factory state. This would mean I would lose my unlocked bootloader, most likely. I really didn't like that option.
2. Buy a broken damaged phone that had the chassis with camera cover still in good condition. Unfortunately, finding a broken phone that wasn't expensive was impossible. SG3s on ebay with broken front LCDs were still going for $200-$300, which I thought was crazy. I even found a completely non-functioning phone that wouldn't turn on that sold for $150! vPrices as of this writing.
3. Order i9300 replacement chassis and camera cover. The i9300 version looked identical and several people thought it would work on the VZW SCH-535 version.
http://www.ebay.com/itm/New-camera-...ccessories&hash=item41688e2be1#ht_2658wt_1271
First Fix (unsuccessful):
I went with the i9300 replacement part option. While initially, I thought I was good to go. After further examination, two problems arose.
1. The bottom of the device has an exposed hole that the VZW SG3 doesn't have.
2. The bottom grooves, raised parts, and and two copper looking objects by the SIM card weren't allowing it to sit flush like the OEM part. I debated on trying to force the screws in...but decided that wouldn't work mainly because of the covered parts by the SIM card.
Looking at the picture you can see the exposed round hole towards the bottom of the i9300 part (bottom piece) and the additional opening on the OEM part by the SIM card (top piece) that isn' there on the i9300 replacement piece.
So at this point, I really wasn't sure what I was going to do. Then thankfully, Smoke314 provided some advice in this thread that worked! :good:
FIX THAT WORKED:
I took Smoke314's advice and removed the camera cover from the i9300 replacement part that didn't fit in the VZW SG3. It removed fairly easy with a flathead screwdriver. I did lose the use of the bond, but was able to put the new camera cover into my existing chassis. It doesn't fall out because of the three little prongs black prongs on the camera cover. The cover stayed in the OEM chassis part even without the bonding! I screwed the chassis back into the phone and put the battery door cover back on. The cover really does help hold it in place because of the additional silver on the camera cover. Now I have no more white haze with my pictures and a phone that looks normal again!!!
Posted a pic of the removal and the phone after all completed.

Yes it should work, both the US and UK versions of the phone, have the same physical parts except for the different processor and ram, but that should work perfectly for you

Neverendingxsin said:
Yes it should work, both the US and UK versions of the phone, have the same physical parts except for the different processor and ram, but that should work perfectly for you
Click to expand...
Click to collapse
Cool, I'm hoping so...going to take my chance and order one. Looks pretty easy to replace. Unscrew some screws, replace, and put screws back in. Hope it's that simple! *fingers crossed*
If anyone else can confirm or add input, would still appreciate it. Thanks!

Here's a video replacing screen on Samsung Galaxy S III (it can get
a little messy but doable)
http://androidrooted.com/file/GalaxyS3/howto/replacescreen/HowToReplaceScreenGalaxyS3.mp4
Good Luck:fingers-crossed: Let us know how it work's out.
Hope this Helps

ImgBurn said:
Here's a video replacing screen on Samsung Galaxy S III (it can get
a little messy but doable)
http://androidrooted.com/file/GalaxyS3/howto/replacescreen/HowToReplaceScreenGalaxyS3.mp4
Good Luck:fingers-crossed: Let us know how it work's out.
Hope this Helps
Click to expand...
Click to collapse
I want to replace the camera cover on the back, not the front LCD. I updated first post. Thanks for trying to provide a solution though.

I looked into complete body swaps for a Verizon GS3 and found that the Verizon model uses a different body. Your replacement part has to be for a Verizon phone and I was unable to find someone who sold those parts.
Sent from my SCH-I535 using xda premium

TommyGun$ said:
I looked into complete body swaps for a Verizon GS3 and found that the Verizon model uses a different body. Your replacement part has to be for a Verizon phone and I was unable to find someone who sold those parts.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Yeah, looks like I'm pretty much limited buying broken and swapping out the part I need or sending to Samsung for repair. :crying:
I'm curious, what did you do? Get a new phone?
On side not, watched that video and man that was crazy...don't think I could attempt that.

thetaman said:
Yeah, looks like I'm pretty much limited buying broken and swapping out the part I need or sending to Samsung for repair. :crying:
I'm curious, what did you do? Get a new phone?
On side not, watched that video and man that was crazy...don't think I could attempt that.
Click to expand...
Click to collapse
http://www.gultek.eu/mobile-phone-spare-parts/
Try looking through there for what you need.

Brian Gove said:
http://www.gultek.eu/mobile-phone-spare-parts/
Try looking through there for what you need.
Click to expand...
Click to collapse
Thanks, looked into it. Didn't see anything.

I had this issue with my S3, I bought the same thing you did. The lens is attached to the silver thing, it will pop out and you can replace that. It is held in with just some bond. A small flathead will pop it out. Not sure if you will have a problem with the cam focusing but it's worth a shot.

Smoke314 said:
I had this issue with my S3, I bought the same thing you did. The lens is attached to the silver thing, it will pop out and you can replace that. It is held in with just some bond. A small flathead will pop it out. Not sure if you will have a problem with the cam focusing but it's worth a shot.
Click to expand...
Click to collapse
Ya its pretty redic he did not know this. I mean come on did you even look. I am laughing so hard you shouldnt be taking apart your phone if you don't have common sense.
Sent from my SCH-I535 using Tapatalk 2

Smoke314 said:
I had this issue with my S3, I bought the same thing you did. The lens is attached to the silver thing, it will pop out and you can replace that. It is held in with just some bond. A small flathead will pop it out. Not sure if you will have a problem with the cam focusing but it's worth a shot.
Click to expand...
Click to collapse
So did you do this? I was able to pop out the piece from my i9300 replacement. Didn't try my phone this morning though. Wanted to wait till this evening to mess with it more. What did you use to reapply the camera cover to your existing casing since the existing bonding can't be used again?
johnnilsson said:
Ya its pretty redic he did not know this. I mean come on did you even look. I am laughing so hard you shouldnt be taking apart your phone if you don't have common sense.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Who is that comment aimed at? And how is this helpful??? I know exactly what I'm doing, it's that I can't find a part that matches up correctly with the VZW SG3. I search google and different forums for solutions. I'm not damn noob. I took a chance on the i9300 replacement because it was the only available option to me. I posted for help and then posted my experience to help others from wasting their time and money on the replacement part. I try to give back to the community, to help others. Not put them down by providing their experiences. It's comments like this that drives away all the good and helpful people from forums.
If you can't provide constructive help, don't comment at all!

thetaman said:
So did you do this? I was able to pop out the piece from my i9300 replacement. Didn't try my phone this morning though. Wanted to wait till this evening to mess with it more. What did you use to reapply the camera cover to your existing casing since the existing bonding can't be used again?
Click to expand...
Click to collapse
I did it to my first S3, the cam wouldn't focus and I though it was because the lens was missing. So I ordered the international part like you did only to find out it doesn't work for our verizon phones (like you have noticed). I then thought about popping out just what I needed, found that was easy to switch them out. Along with the bonding there are those 3...pins we'll call them. They sit in the housing pretty snug and then your battery door will cover most of the silver keeping it in place anyway. Maybe just be careful when taking the door off if you change batteries or something. If you are nervous you could try to superglue or some commercial type of bond from a store.

Smoke314 said:
I did it to my first S3, the cam wouldn't focus and I though it was because the lens was missing. So I ordered the international part like you did only to find out it doesn't work for our verizon phones (like you have noticed). I then thought about popping out just what I needed, found that was easy to switch them out. Along with the bonding there are those 3...pins we'll call them. They sit in the housing pretty snug and then your battery door will cover most of the silver keeping it in place anyway. Maybe just be careful when taking the door off if you change batteries or something. If you are nervous you could try to superglue or some commercial type of bond from a store.
Click to expand...
Click to collapse
Cool...thanks for the info. I saw the prongs and thought about superglue. Just curious...you said your first. So I'm assuming you got another SG3 for another reason?
Did the one that you made the fix on, did you actually use it for a while? Just wondering if you had any problems with it after making the change. Good point about the silver trim. The battery door does cover a good amount of that silver trim. I may try this fix. Worse case scenario...I buy a broken SG3 to get the part I need or send it to Samsung to fix.

FIXED!!!
So I took Smoke134's advice and was able to fix my camera cover for my SG3!!! :good: I rewrote the first post with my experience, hopefully others might benefit and be able to fix theirs if they encounter the same problem.

Glad you got it fixed!
I'm sure your misfortune and your end result will be of use to others that find themselves in the same position. I'm sure you won't be the only one.

Thanks for posting this! Good to know it can be resolved!

Thank you for posting your solution OP. I took a chance on the i9300 part hoping it would fit, but of course it did not. Then I found your post and went ahead with the transplant procedure. The only step I added was to heat up the lens with a hair dryer before prying it loose. This allowed me to remove the lens without removing the bonding material. The heat also made the plastic more pliable; I was able to pry the lens out easily with just my thumbnail. The new lens seems very secure.

milkfat said:
Thank you for posting your solution OP. I took a chance on the i9300 part hoping it would fit, but of course it did not. Then I found your post and went ahead with the transplant procedure. The only step I added was to heat up the lens with a hair dryer before prying it loose. This allowed me to remove the lens without removing the bonding material. The heat also made the plastic more pliable; I was able to pry the lens out easily with just my thumbnail. The new lens seems very secure.
Click to expand...
Click to collapse
Good idea, glad it worked for you! :good:

I ordered one of these today. Will let you know if it resolved my issue.
It is just the camera lens cover part without the frame.
http://www.ebay.com/itm/120989016566?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

How to repaint the chrome bezel?

My corners are stripped from drops and i want to resell it in january when i get my note 2. So i bought a new battery and battery cover now i just need to find a way to repaint the chrome bezel, any ideas?
Sent from my SGH-T959V using Tapatalk 2

The problem is any paint is probably going to scratch off fairly quickly as its only going to be painted on the surface. They are certain spray paints that bond better with the actual plastic, but the name escapes me right now. Also, to get the bezel off, I think you have to strip it right down and remove the screen as well which needs a heat gun. I've have my system nearly apart except for the lcd/screen heatgun thing, and the bezel never came off.

Im just looking to paint over im very new when it comes to all this im just looking for a simple way to do it.
Sent from my SGH-T959V using Tapatalk 2

horr1blek1tten said:
Im just looking to paint over im very new when it comes to all this im just looking for a simple way to do it.
Sent from my SGH-T959V using Tapatalk 2
Click to expand...
Click to collapse
Well I'm trying to tell you there isn't a simple way, if you just paint over it with a brush and some paint, it will wear off in a week as it won't bind to the plastic and will just be painted on top of the chrome finish.
You need to take it apart like here, http://www.ifixit.com/Teardown/Samsung+Galaxy+S+4G+Teardown/4977/1 to get the silver bezel off, sand it down to remove the chrome finish and create a rough surface for the paint to bond to, use a plastic bonding paint and paint it and put it back together.
I have customized PS2, PS3, Xbox, XBox 360, PSP, DS, PC's, so I'm trying to tell you the work involved to do a job that will last longer than a week. Otherwise, put a case on it so you don't see the chrome. lol. Seems the easiest way if you're not comfortable taking the system apart and heatgunning the screen off, sanding, buying the proper paint, etc.

I also think repainting the bezel is a way to mislead people into thinking its never been dropped. Which is not the right thing to do. Just tell people the truth and you will probably get a decent price. This phone wont sell for a bunch anyway. Plus if you half ass it like getochkn is telling you NOT to do the buyer can return it or do a chargeback on paypal. Especially if you dont inform them you painted the bezel.

Im not trying to mislead anyone i just want it to look nice.
Sent from my SGH-T959V using Tapatalk 2

I would just not worry about it. The process is either going to look crappy or more work than it appears you are looking to do.
If you are good at taping things off you could hand sand the bezel and tape the screen off and spray it but you still run the risk of messing up.

horr1blek1tten said:
Im not trying to mislead anyone i just want it to look nice.
Sent from my SGH-T959V using Tapatalk 2
Click to expand...
Click to collapse
Well Eollie is right, but if you are hellbent on "pretty-fying" your phone and obviously you don't have the mechanical skill to disassemle it, the skill to replate it, let alone repainting it(yes, painting done right is actually harder then electroplating) then this would be your best option http://www.bare-metal.com/bare-metal-foil.html it's called chrome leafing and is by far the best option for you, other then just giving it a thorough cleaning and being done with it.

I saw a guy in the Vibrant forum complete changed the front cover to white. The kit sells on Amazon for about $70. It looks very nice 2.http://forum.xda-developers.com/showthread.php?t=1762191
Sent from my SGH-T959V using xda premium

I just found out that the silver bezel is replaceable. It costs about $9 for a "used like new" one. Actually, most of the parts on our phone are replaceable. Let me know if u need a link to that website I saw.
Man, I got to stop reading this forum and start working on my car website.
Sent from my SGH-T959V using xda premium

the issue is that the chrome isn't a paint, it's a finish that's baked on, so any sort of "touch-up" paint is going to look like crap.
You can try to polish it, but be careful since the spinny-type of polishing bits generate heat, which can damage the plastic bits on the phone if you're not careful.
Your best bet is to get a replacement part like gizmo mentioned.

DIY Game Clip for any phone/case (coat hanger)

I received some feedback asking me to post instructions on how I made my game clip to hold my phone (Galaxy S III) to a PS3 controller (homemade or DIY Gameclip). I have posted a pdf of the instructions on mediafire and attached a 7zip file of it to this post.
http://www.mediafire.com/view/?gg4lyu663854moa
I first of all would like to say I got the idea from the thread of the GameKlip and thought it was a brilliant idea and a nice product, but I didn't want to spend $30 U.S. (incl. shipping) and wait a couple weeks to get one....and I couldn't keep my case on the phone while I used it, so I made my own. Kudos to the GameKlip if you are interested in getting one.
Here's the latest Gameklip for the Galaxy s3 http://forum.xda-developers.com/showthread.php?t=2027611

I do love using my GameKlip... when not using my extended battery (which I have on most of the time). This will solve all! I wonder if some sort of insulation for pipe/etc could be used to further cushion the phone... hmmm.... Maybe one of the rubber coated hangers.
Either way, how did I not think of this?! I tried sheet metal and other way more complex options, lol.
I'll post my rendition of this! Hope to try it out tonight!
THANKS AGAIN!

flawedlegacy said:
I do love using my GameKlip... when not using my extended battery (which I have on most of the time). This will solve all! I wonder if some sort of insulation for pipe/etc could be used to further cushion the phone... hmmm.... Maybe one of the rubber coated hangers.
Either way, how did I not think of this?! I tried sheet metal and other way more complex options, lol.
I'll post my rendition of this! Hope to try it out tonight!
THANKS AGAIN!
Click to expand...
Click to collapse
Thank you. I have thought about something like plasti-dip ... dip the whole thing after making it...probably would just have to take into account the thickness if the coating while making it.
http://www.homedepot.com/buy/performix-brand-plasti-dip-11603-6.html#.UP1_eGdmO2U
I look forward to seeing your idea of it, please post pics. I have thought of different ways to "design" it, including having only one arm holder at the top. Making the bottom "hooks" up from the button 1 & 2 "towers" to move the phone up, etc... in the mean-time it works well for me...I hope yours does for you.

I got some Plasti-Dip at home I use on my car and thought of that as well. I got a few different ideas I'm gonna try to play with. ... Just a matter of finding time as wife and I are preparing for our firstborn. I'll definitely post pics of whatever I come up with!

possible to do a similar style but for a mini bluetooth keyboard? im having a hard time figuring out that one....

I am sure something is. I don't have a mini blue tooth keyboard. Which one do you have?
Have you seen the universal gameclip? It just sticks to a cheap case? How about a flat piece of metal stuck to case with the phone and velcro'd to the bottom of the keyboard? Could even bend it slightly if you don't want it flat?
Sent from my SGH-i747 running CM10.1 nightlies using xda premium

Excellent job
That looks pretty darn snazzy. I know I would be employing the "Close enough" meme if I tried to do that.

I have been thinking of something like this but I must design a little differently as I will use it on an xbox360 controller and a 7 inch tablet.

xdacuc said:
I have been thinking of something like this but I must design a little differently as I will use it on an xbox360 controller and a 7 inch tablet.
Click to expand...
Click to collapse
Please post pics for anyone else who may want that setup. I don't have an xbox controller so I couldn't try...it definitely looks a bit trickier. Good luck.

Thanks. I will make pictures for sure. Still in the planning phase for the moment but will work on it next week.

Tried three times and failed. Baby en route, so it's on the back burner.
BTW: the rubber coated hangers SUCK to bend, rubber tears easily! Don't waste one!

I made one with 1 hook on top to hold the phone. The bend makes it act like a spring. It's easier to get the phone out of this one
Sent from my SGH-i747 running CM10.1 nightlies using xda premium

3d printer

I made mine using your instructions; I strongly encourage you to get some shrink wrap tubing. It looks much better than whatever old varnish the coat hanger may have left, and there won't be glue smudging as with electrical tape.
I happened to have a slightly larger tube which I used on the hook portion. To make the tips, after having deburred with a file, I simply left some extra length, bent that backwards and finished it off with an additional short tube added in a second pass.
It is preferable to make your bends first, then work the tubing on, as pliers will most likely damage the tubing cosmetically at least.
A small black zip tie secures the mini-USB cable. Not shown in the photos, I found an old camera lanyard and added over the metal frame for some additional security.
Here are the results:
Cheers,
Darkshado

Awesome! Thanks for posting pics! I use the sixaxis app so I don't need the wires but yours looks great with them. I like the tubing too. Your are of course absolutely right about no gummy from the tape with the tubing. I bet it makes it stickier too so the phone won't slide around.
Sent from my SGH-i747 running CM10.1 nightlies using xda premium

Darkshado said:
I made mine using your instructions; I strongly encourage you to get some shrink wrap tubing....
Darkshado
Click to expand...
Click to collapse
Looks awesome, I'm definitely going to attempt one myself. What diameter heat shrink did you use? (approx)

Thanks! IIRC, the smaller one was 4-5 mm, the larger 10 mm. It can always be cut and removed if the size you're using isn't working, and tubing like this is cheap.

LONG overdue but needless to say I've failed at 3 attempts. Trying to get them perfect and they snap on me. Might just try to mod one of my 1st Gen Game Klips I got laying around since I now have the 7000mAh battery to give me PLENTY of gaming!

Guys its a lot easier to buy a spider podium and wrap it and shape it to fit your phone. Worked perfectly. Only downside is that its unremovable. Just added a camera lanyard
Sent from my YP-GI1 using xda app-developers app

pics?

[Q] Note3 N9005 - is the Plastic Rim Around the Phone Replaceble?

I recently bought a Note 3 N9005. The Phone is awesome and have been functioning very well, except the Battery drain when playing games on it but I can live with that.
Couple of days back the phone accidentally slipped from my Hand and fell on the Ground . When i picked it up the upper right corner of the phone was chipped and i saw that the Metallic Looking rim for Note 3 is not actually metal but Metal like looking plastic . Now i am left with a Amazing phone with a very sore look. Every time i look at the phone i first look at that chip which makes me very upset
Can anyone please let me know is there any way I can replace the Metal Rim? Is the Metal Rim attached to the LCD Screen? Will I be able to purchase the Metal Rim and replace it with mine?
Pleaseee let me know as that chipped part on my phone is bothering me very much and I have searched the Internet for answers but did not find any. I hope to find them here.
Thanks in Advance.

I don't know about replacing the original part, but a surely cheaper and easier way would be to buy and use a metal bumper. Cheap, easy to install, real metal. There were some threads about it in the Note 3 Accessories subforum.

The plasic metal looking rim is part of the screen's frame, you can only replace it if you replace the whole screen.
So i think it's best if you leave it like that or you must have a pretty big wallet you want to empt, new screen is like $250 a least.

I dont know how hardcore technicians live in ur part of the world but there in Poland replacing S4 frame is pretty much doable so its possible also with note3. Price should be under $100.

Thanks for the response guys...I was hoping to hear a different answer guess i just have to live with that or change to another phone. Thanks for the help. btw i am from India.

What timing! I've only just chipped the frame aswell?. I've maybe dropped my phone 5 times(3 on tile & 2 on lino) and luckly each time, it has fallen screen up.
TBH replacing the whole frame was my last consideration. At first I wanted to paint it, but now I'm just going to get a cover. I'll post a pic of the chip when I get the time. Mine's on the Faux metal rim and not the glass. How bad is yours? Maybe post a pic?
In the end it doesn't matter how little it is, it still drives you nuts?. Take a look at the accessories thread and you'll see most, if not all, of the cases cover the rim around the front. This is would be the easiest solution in my mind.
Sent from my SM-N9005 using Tapatalk

denski101 said:
What timing! I've only just chipped the frame aswell?. I've maybe dropped my phone 5 times(3 on tile & 2 on lino) and luckly each time, it has fallen screen up.
TBH replacing the whole frame was my last consideration. At first I wanted to paint it, but now I'm just going to get a cover. I'll post a pic of the chip when I get the time. Mine's on the Faux metal rim and not the glass. How bad is yours? Maybe post a pic?
In the end it doesn't matter how little it is, it still drives you nuts?. Take a look at the accessories thread and you'll see most, if not all, of the cases cover the rim around the front. This is would be the easiest solution in my mind.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah, i think i will have to consider the Metal bumper for now to cover up that Chip. its driving me crazy every time i look at my phone. yes, I have used iPhone 4 in the past and i have dropped it several times but had no visible scratches on the phone. But I dropped my Note3 once and Boom!! Scar for life :crying: attaching the picture...

In your situation I would mask the screen very accurately at that corner use epoxy glue to build the missing area up (as epoxy dries it can be shaped & cut to shape with a razor blade) finalise the shape BEFORE its fully cured then allow to cure for a day then paint with cosmetic nail paint close to chrome as you can.
Sent from my SM-N9005 using xda app-developers app

I would just do what Pat. said.

NazzyJ said:
Yeah, i think i will have to consider the Metal bumper for now to cover up that Chip. its driving me crazy every time i look at my phone. yes, I have used iPhone 4 in the past and i have dropped it several times but had no visible scratches on the phone. But I dropped my Note3 once and Boom!! Scar for life :crying: attaching the picture...
Click to expand...
Click to collapse
Arghhhh!!? Not to add insult to injury, but that is a shocker. You need a case ASAP! I feel embarrassed complaining about mine. Here's my damage report:
Sent from my SM-N9005 using Tapatalk

denski101 said:
Arghhhh!!? Not to add insult to injury, but that is a shocker. You need a case ASAP! I feel embarrassed complaining about mine. Here's my damage report:
Click to expand...
Click to collapse
I was using a S-View Cover when the phone fell...I thought my phone should be safe but when i picked it up I saw the top right end of the phone was chipped. Threw the S-View Cover away, Will be buying some nice Cases/ bumpers for the phone this weekend.

Pat. said:
In your situation I would mask the screen very accurately at that corner use epoxy glue to build the missing area up (as epoxy dries it can be shaped & cut to shape with a razor blade) finalise the shape BEFORE its fully cured then allow to cure for a day then paint with cosmetic nail paint close to chrome as you can.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Thanks Pat, I will try it this weekend and will update it here. Hopefully everything goes well maybe i'll attach some pictures as well.

Don't forget to mask the rest of the phone while doing it as Epoxy can easily get on things I've noticed & is very hard to remove.
I put a larger than needed blob on & then don't start cutting to shape until it's the consistency of toffee.
Use the the blade in a sawing action.
Good luck.
Sent from my SM-N9005 using xda app-developers app

Pat. said:
Don't forget to mask the rest of the phone while doing it as Epoxy can easily get on things I've noticed & is very hard to remove.
I put a larger than needed blob on & then don't start cutting to shape until it's the consistency of toffee.
Use the the blade in a sawing action.
Good luck.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
How much time should I give it until i cut it into shape? Thanks Again.

It is an expensive device so because different makes/types of glue dry at different speeds the trick is to do a test run with the glue in the same environment as you will be doing the repair & monitor/time the glue to see how long the "window" for manipulation of it.
Araldite is good & for a rough idea it may be from about 20mins after applying to an hour. But do a test run. (Buy good glue, i tried some pound shop epoxy last year & it was worse than useless).
Sent from my SM-N9005 using xda app-developers app

High probability of losing the pen

After using the S6 over the weekend a few times, I'm almost sure I will lose the pen unless I buy a case that covers it. While I like the idea of how it sits on the back of the tablet slightly indented they should have made the magnet the whole pen instead of just the pointer area. Its not strong enough to hold it in place from an accidental hand bump etc.

I have the keyboard cover on order (arriving Friday). I'm being extra cautious with the pen until that arrives. It doesn't take much of a bump to knock it off.

nicholb said:
I have the keyboard cover on order (arriving Friday). I'm being extra cautious with the pen until that arrives. It doesn't take much of a bump to knock it off.
Click to expand...
Click to collapse
I agree that the method of stowing the stylus this year is terrible. On the other hand, in previous years the stylus couldn't be stowed at all, so in that sense, it's an improvement.
The keyboard cover, on the other hand, is a big improvement on the design of previous years. With that, the stylus can be very safely transported.

Duct tape fixes everything. Or for a more permanent solution, a little JB Weld and your S-Pen isn't going anywhere. Ever.

So i got my tab yesterday, at first Ithought the attachment wasn't bad, but then after using for the day Ihave to say Itoo am very dissapointed in the spen attachment. This is nearly as dangerous as the oriignal apple pencil pluggin into the bottom port of the ipad to charge. Do the people that design these things actually try to use them?

gottahavit said:
So i got my tab yesterday, at first Ithought the attachment wasn't bad, but then after using for the day Ihave to say Itoo am very dissapointed in the spen attachment. This is nearly as dangerous as the oriignal apple pencil pluggin into the bottom port of the ipad to charge. Do the people that design these things actually try to use them?
Click to expand...
Click to collapse
The Note phones somehow have enough room to store the S-Pen inside. Why can't they find the room on a 10" tablet? I know the pen is thicker but I think most people would trade a slightly thinner pen for a way to securely store it.

If you're actively using the device but not the pen it'll also stick to the lower right side of the device in portrait mode. Not a great solution, but I find it easier to have it there and not accidently knock it off like when it's on the back. It doesn't charge in this location, but that shouldn't be an issue since this pen uses a battery with longer life then the capacitor style like the Note 9 was. Or I just toss it on the table/couch/whatever near me if I'm at home or work. Within reach when I want it, but not going to fall off when I absentmindedly grab the tablet in the wrong way.
I'm waiting on my keyboard cover to arrive and then I don't think it being on the back will be a big deal anymore. Kind of sucks that's where it has to go to charge because I liked my case for my S3 that held it to the left of the screen in the hinge of the screen cover part basically. Sucks they've never made a more permanent solution, and this is the first time it actually has a storage spot, but so long as the devices get thinner and thinner I don't see them putting it inside like on the Notes since they want the tablet pens to be more ergonomically friendly.

I lost my S-Pen early in. One solution was using an Otterbox. The Tab could be secured to the tablet cover/stand, face-up, so the pen is secured.
In the interim, I am using a spare pen from a Fujitsu Lifebook tablet.

howie411 said:
After using the S6 over the weekend a few times, I'm almost sure I will lose the pen unless I buy a case that covers it. While I like the idea of how it sits on the back of the tablet slightly indented they should have made the magnet the whole pen instead of just the pointer area. Its not strong enough to hold it in place from an accidental hand bump etc.
Click to expand...
Click to collapse
I bought this one and it holds the pen very nicely. It's easy to get in and out.
https://www.amazon.com/dp/B07Z4HKTM4/ref=cm_sw_r_cp_taa_AiNeFb5QCWT34

jhill110 said:
I bought this one and it holds the pen very nicely. It's easy to get in and out.
https://www.amazon.com/dp/B07Z4HKTM4/ref=cm_sw_r_cp_taa_AiNeFb5QCWT34
Click to expand...
Click to collapse
Highly recommend! Not everyone has the same requirements https://forum.xda-developers.com/showpost.php?p=81903145&postcount=24) but I tried four other cases before this one.

TiTiB said:
Highly recommend! Not everyone has the same requirements https://forum.xda-developers.com/showpost.php?p=81903145&postcount=24) but I tried four other cases before this one.
Click to expand...
Click to collapse
That's the one I bought. I like it very much.

Has anybody ever succeeded in buying a full-function replacement pen from Samsung? I tried to buy a spare one when I bought the Tab S6, but all I got was a glazed stare from the salesperson. Would be nice if Samsung at least tried to make up for the sucky magnet. ;-DeanoD

DeanoD said:
Has anybody ever succeeded in buying a full-function replacement pen from Samsung? I tried to buy a spare one when I bought the Tab S6, but all I got was a glazed stare from the salesperson. Would be nice if Samsung at least tried to make up for the sucky magnet. ;-DeanoD
Click to expand...
Click to collapse
They're listed on Samsung's website:
https://www.samsung.com/us/mobile/m...-tab-s6-s-pen---mountain-gray-ej-pt860bjeguj/
Besides the gray, rose and blue are also available.