usb port on charger - Microsoft Surface

My USB port on the charger does not seem to work correctly it will not charge my phone but if I keep plugging it in and unplugging it occasionally it will start charging the charger charges the surface fine really annoying now I am unable to charge my phone whilst away.

Well first of all double check its not the phone. Then warranty replacement may be necessary if it is actually the charger.

SixSixSevenSeven said:
Well first of all double check its not the phone. Then warranty replacement may be necessary if it is actually the charger.
Click to expand...
Click to collapse
Well it's not the phone the charger is putting 0v out through the usb

blair287 said:
Well it's not the phone the charger is putting 0v out through the usb
Click to expand...
Click to collapse
Unless you think you can crack it open and repair it yourself (your own your own there) you will probably require warranty replacement. My bet is on a dodgy solder joint myself.

Related

mOrE URGENT HELP WATED - Have I fried my Nexus One?

Hi guys,
I stupidly plugged my Nexus One USB cable into a higher voltage charger in my car, about 8v-10v I think, and I could immediately smell burning. I unplugged it straight away and the phone died. The result was;
1. I could no longer charge it off the wall charger or computer USB charger, just got zero response, no led's etc.. seemed as though the phone was totally gone.
2. Then I took the battery out and charged it in my external battery charger. When I put the battery back in the phone it turned on and worked perfectly!!! although the battery didn't seem to last as long.
3. When it was powered on an working, it wouldn't pick up the USB connection to my PC. Did nothing.
So.... it seems as though the USB port is obviously not working. Would this be the extent of the damage or would it be something more serious in the phone?
Would the official Google dock allow me to charge the phone and connect it to my computer given that it uses the 3 pin method and not the USB?
Any help would be greatly appreciated.
Cheers,
Morgan
Ahhhh the smell of a resistor going. And within a circuit when one major component goes it will drag some others with it. Which could explain short battery life. Back up your stuff. And look into your options to replace device. Unless you have extencesive knowlege on micro surface mounted printed circuit board components and measureing values.
good day.
I don't have any knowledge of circuit boards so is there any other options to repairing this device? It is basically brand new!
Is there any chance that a dock would allow me to charge it?
If not, can I replace the main board? I disassembled it yesterday and know how to change it out.
spartain27 said:
Is there any chance that a dock would allow me to charge it?
Click to expand...
Click to collapse
Just guessing, but no. The cooked components for the charging circuit would also be in parallel to the dock port.
spartain27 said:
If not, can I replace the main board?
Click to expand...
Click to collapse
If you can find someone to sell it to you. yes
spartain27 said:
I disassembled it yesterday and know how to change it out.
Click to expand...
Click to collapse
There goes any hope for a warranty claim.
good day

Charging port pins lifting

Hi I noticed a while ago that pin 30 on my charging port of my tablet was lifted some so I pushed it down with a toothpick. There wasnt an issue with the tablet before, it was just something I noticed. I ordered a cable from ebay, probably a knock off, and it worked for both charging (with the use of the p1000 adapter) and for data transfer. I was using the tablet mostly for debugging and movies. I recently had it charging for a while using the rocketfish usb hub and the p1000 adapter. I tried to plug in my tablet to the pc with and without the adapter and my pc was telling me that it had an unknown device plugged in. I looked up what exactly pin 30 was and it is a ground pin. My question is would that pin affect the ability for the pc to data transfer and recognize the device? The cable currently only works for charging and that is with or without the P1000 adapter. Other than that it gives me an unknown device when plugged into the pc. I dont have another tablet or cable to test so I may just order an official cable and charger if the ground shouldnt be an issue.
Have you installed Kies? Windows cannot recognize samsung galaxy devices without it
My cable stopped charging all together. I ordered another data cable to see if my original cable was faulty. Hopefully that was the problem all along.
I got my new cable in which btw is alot more sturdier than the last. I plugged it in anticipating an error and behold! My pc recognized my tablet and began to charge. The data part works because it instantly showed that the tablet was in debug mode. So my pins were not a problem, just my cheap chinese tablet cable. P.S. I did not have to install that software and if in the future I come across a problem then I will try out the software. Unless there is a benefit to installing the samsung software? feels like an iTunes type of software. Thanks for the suggestions and hopefully this will help others in the future.
:good:
Thank you for posting your fix for your question. It drives me crazy when people ask a question. Then later reply nvm I figured it out. (And don't explain what they did) or not even reply at all.
I think I have same issue. My stock cable won't charge anymore. Do you have a link where you bought new charger? Or what store did you go to?
I ordered one from amazon and it was a knockoff that gets a red x over battery icon :/
trevor7428 said:
Thank you for posting your fix for your question. It drives me crazy when people ask a question. Then later reply nvm I figured it out. (And don't explain what they did) or not even reply at all.
I think I have same issue. My stock cable won't charge anymore. Do you have a link where you bought new charger? Or what store did you go to?
I ordered one from amazon and it was a knockoff that gets a red x over battery icon :/
Click to expand...
Click to collapse
Did you order cable only?
Are you sure there is nothing wrong with the charger base?
se1988 said:
Did you order cable only?
Are you sure there is nothing wrong with the charger base?
Click to expand...
Click to collapse
No I order this combo kit with wall charger, car charger and 30 pin USB cable. From amazon
Weird cause the car charger works amazing. Can watch Netflix w/ full brightness and still charge. While the wall charger will only charge if shut down
But about original charger. I was mistaken. I had a 6ft. Extention cord that I would plug it into cause original cord is way to short. And come to find out it was the extention causing the issue.
But I'm still interested in a Spare wall charger that actually works. Lol where did you get yours. Is it just as good as stock
trevor7428 said:
But about original charger. I was mistaken. I had a 6ft. Extention cord that I would plug it into cause original cord is way to short. And come to find out it was the extention causing the issue.
Click to expand...
Click to collapse
I've experienced the same with extention cord, wonder why the amps get lost on the way into the battery?
se1988 said:
I've experienced the same with extention cord, wonder why the amps get lost on the way into the battery?
Click to expand...
Click to collapse
Well technically the extention cord isn't putting out the same amount of amps as the wall outlet. Especially when the gauge of the wire is way smaller most likely. But I like to use my tablet while charger and refuse to 3ft away from wall so its kinda neccessary lol

Problem charging my tab

Yesterday i installed some apps on my tab (P5110) with cyanogenemod11 then i plugged the charger ,after at least 2 hours the baterry was still 1% then today morning 10:00 i shut down my tab and now 15:00 it's only 40 % i installed mokee and same thing ,doesn't charge i have a wall charger Please help me !!
Sorry for bad english
look at battery stat, see whats draining...wipe battery stats
0semaj0 said:
look at battery stat, see whats draining...wipe battery stats
Click to expand...
Click to collapse
When i plug the charger it's says "Not charging" but when i shutdown my tab it's charges but its takes forever to full charge !
sidodz said:
When i plug the charger it's says "Not charging" but when i shutdown my tab it's charges but its takes forever to full charge !
Click to expand...
Click to collapse
Try another charger. Quite a few people seem to be complaining about the OEM Sammy chargers going kaput. Also could be a cable problem (broken wires) - I had a similar problem with my wife's tablet, fixed by replacing a cable.
kt-Froggy said:
Try another charger. Quite a few people seem to be complaining about the OEM Sammy chargers going kaput. Also could be a cable problem (broken wires) - I had a similar problem with my wife's tablet, fixed by replacing a cable.
Click to expand...
Click to collapse
Tnx everyone for your help i will buy a new one .
sidodz said:
i will buy a new one .
Click to expand...
Click to collapse
Before buying a new charger, I would suggest confirming the exact problem first. You may be able to borrow a charger from someone (any USB charger with approx 2 Amp output will work, for example, from an iPad), or a cable. See what fixes the issue, and get a replacement. Also, if you have some average soldering skills, the cable can fairly easily be fixed at home (in case it is a faulty cable) - the wires usually break at the connector, and the OEM Sammy 30-pin connector is snap-assembled, not glued, so you can take it apart and put it back togethet. Good luck!
kt-Froggy said:
Before buying a new charger, I would suggest confirming the exact problem first. You may be able to borrow a charger from someone (any USB charger with approx 2 Amp output will work, for example, from an iPad), or a cable. See what fixes the issue, and get a replacement. Also, if you have some average soldering skills, the cable can fairly easily be fixed at home (in case it is a faulty cable) - the wires usually break at the connector, and the OEM Sammy 30-pin connector is snap-assembled, not glued, so you can take it apart and put it back togethet. Good luck!
Click to expand...
Click to collapse
Thanks for your suggestion but i alreadh bought a new one but thanks againe for your help
sidodz said:
Thanks for your suggestion but i alreadh bought a new one
Click to expand...
Click to collapse
So... Does it work now?
kt-Froggy said:
So... Does it work now?
Click to expand...
Click to collapse
Yes it's works , and i gave the old charger to my uncle and he said that the problem were in the USB cable

A510 won't charge

Since last night my a510 won't charge at all. There was a thunderstorm and a power cut and the charger was connected to the socket (a multi socket with several other items including a phone charger) but not to the tablet. When I plug it in now there's no indication that it is charging and the battery keeps going down. I tried with the phone charger also and a USB cable on the PC. While I know at best this would charge the tablet in 24 hours or so there was again not sign of charging at all.
Is it still most likely to be the Acer charger that's at fault or is there something else I could try?
pickarooney said:
Since last night my a510 won't charge at all. There was a thunderstorm and a power cut and the charger was connected to the socket (a multi socket with several other items including a phone charger) but not to the tablet. When I plug it in now there's no indication that it is charging and the battery keeps going down. I tried with the phone charger also and a USB cable on the PC. While I know at best this would charge the tablet in 24 hours or so there was again not sign of charging at all.
Is it still most likely to be the Acer charger that's at fault or is there something else I could try?
Click to expand...
Click to collapse
edit: turns out it does trickle charge with a normal USB charger even if the charge light doesn't come on. Seems to be really hard to find a replacement for these though.
pickarooney said:
edit: turns out it does trickle charge with a normal USB charger even if the charge light doesn't come on. Seems to be really hard to find a replacement for these though.
Click to expand...
Click to collapse
12V, 1.5 Ampere, I believe just about any electronics outlet should have something in stock. Original would be better, true. Get a surge-protected multisocket if your area is prone to bad weather.
Luther Blissett said:
12V, 1.5 Ampere, I believe just about any electronics outlet should have something in stock. Original would be better, true. Get a surge-protected multisocket if your area is prone to bad weather.
Click to expand...
Click to collapse
The problem is the MicroUSB port on the tablet has an extra connector so I don't think it will be possible to use a normal microUSB cable with a 12V adapter.
pickarooney said:
The problem is the MicroUSB port on the tablet has an extra connector so I don't think it will be possible to use a normal microUSB cable with a 12V adapter.
Click to expand...
Click to collapse
I tried with another adaptor which has the right shape and 12V output and is supposed to be compatible but not joy. It might be the tablet itself but it's weird if it just stopped working overnight.
warranty
pickarooney said:
I tried with another adaptor which has the right shape and 12V output and is supposed to be compatible but not joy. It might be the tablet itself but it's weird if it just stopped working overnight.
Click to expand...
Click to collapse
I had the same problem, after 2 month my charger was dead. I Contacted ACER send in the tabled and got a new charger in about 1 week.
You need 12 Volts for Charging 5 Volts want Charge your Battery fully.

showing slow charging while connect to charge

always showing show charging when i connect to samsung charger.
any solution to get back fast charging ?
bhaavuu said:
always showing show charging when i connect to samsung charger.
any solution to get back fast charging ?
Click to expand...
Click to collapse
In 90% of cases this is caused by either a faulty cable or a faulty powerbrick. Are you sure it isn't either of it?
Else try cleaning your port, once had this issue (but with microUSB) that it charged 5%/h just because there was so much dust in the port.
Also I had one (really cheap) USB-C cable which was just working when plugging in with one dedicated side up - so when I flipped the cable 90°, it wasn't even recognizing the cable -> turn back and even fast charging worked.
No faulty cable or no any cut with cable.. its genuine..
sometime getting fast or cable charging
jaannnis said:
In 90% of cases this is caused by either a faulty cable or a faulty powerbrick. Are you sure it isn't either of it?
Else try cleaning your port, once had this issue (but with microUSB) that it charged 5%/h just because there was so much dust in the port.
Also I had one (really cheap) USB-C cable which was just working when plugging in with one dedicated side up - so when I flipped the cable 90°, it wasn't even recognizing the cable -> turn back and even fast charging worked.
Click to expand...
Click to collapse
Some time i m getting fast charging or cable charging if i reinsert pin 4 to 5 times....
jaannnis said:
In 90% of cases this is caused by either a faulty cable or a faulty powerbrick. Are you sure it isn't either of it?
Else try cleaning your port, once had this issue (but with microUSB) that it charged 5%/h just because there was so much dust in the port.
Also I had one (really cheap) USB-C cable which was just working when plugging in with one dedicated side up - so when I flipped the cable 90°, it wasn't even recognizing the cable -> turn back and even fast charging worked.
Click to expand...
Click to collapse
Any Idea that how to clean port ???? i think its dust there.
i have exactly the same problem started happening today. multiple chargers and cables still shows slow charging
Same problem with me. Please help
I use a push pin (thumbtack with a plastic head) to clean the port. I have had to do this a few times since I got the phone a couple years ago. I have scraped pretty hard the bottom of the port and not caused any damage. Of course you do need to show some restraint. I don't want to be the cause of you breaking your phone. I had the most trouble with a car charger, but also the OEM charger. The cleaning has always fixed it for me.

Categories

Resources