Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
I have a Vido N101RK 10.1 inch Quad Core RK3188.
I upgraded the firmware with the RKbatchtool.
All went fine and it succeded.
But now, the tablet won't startup anymore. The screen keeps black.
What can I do?
I got this tablet from China, 10.1 inch allwinner sun7i. Nothing seemed very good about it. I thought I would flash the recovery to see if I can get better roms. All of a sudden, when I turn it on, all I get is the A20 Dual core logo and that's it. I am quite experienced in rom flashing with other KNOWN devices but I am at a loss with this. What can I do. I have got phoenix suite but when I try a rom it says that the IMG is not valid. What else can I do.
Hi Guys i need help, i am trying to figure this out but i am not getting any luck.
The tablet has working fine with the stock firmware it has the 4.0.4 one day the battery runs out and when i try to boot up after battery load the tablet stays on the samsung logo until the battery runs out.I have try to enter in recovery mode but it failed back to samsung logo, i can enter in download mode only.
Can some one give a link to download de firmware version 4.0.4, i have try the latest version 4.4.2 with odin but it stil stuck on the samsung logo.
If the version 4.0.4 or the latest 4.4.2 do not work, maybe is an emmc problem but i am not sure.
Regards,
Diogo.
DE German firmware .
Not see any 4.o4 on sammobile .
Hi,
In Sammobile portal do not have this older version i cannot find any were in the web, the links are all dead.
Can some one help me find this older stock rom?
hi, any solution??
Yes as posted multiple times .
Flash stock firmware .
The same happends to me. The tablet stucks on "Samsung Galaxy Note 10.1" logo and a "stop-clock" icon appears when it's charging. I can't access to Recovery Mode, only to ODIN mode.
With ODIN I tried to flash several ROMS, including the STOCK ROM from several countries, and no one works. I change the recovery, the bootloader, the rom, and everything that I thougt, but nothing works. In ODIN, appears to success, but really not.
Someone solve it?
Hi,
I was trying to root a Samsung Galaxy A01 Core I had lying around but messed up somewhere in the process and can't figure out how to get it to boot back into android. I've tried different versions of TWRP and OrangeFox but none of them seem to work with this model. The closest I've gotten to booting android is getting the samsung logo by flashing a stock ROM that does identify as Samsung Official in download mode. I can't interface with it through ADB or fastboot and I've tried all the fixes I could find such as a different cable, extracted PIT and removing the SIM card. This phone is not at all important but I would like to use it for projects.
Is there any hope of getting this phone back into working order? Please say something if there is any information that could help.