Hello i bought a clone of the note 3, an sm n9006. This phone have smart control, air gesture but not Air Command.
When i extract the pen it is like the pen is still inside and nothing appear. Air command seems to not work correctly. inside the phone it is snote software and the pen" work".
The exact model is N9006ZCUBMI3 and the build is JSS15.N9006ZCUBMI5.
Using a different rom for sm n9006 could be unlock the air command? where can be found the roms for this device?
Related
Hi,
I'm new in this forum and I don't really know where to write this post. I would like to know if there is any AT command to obtain Reference cell information and Neighbour cell information, such as, +UCELLINFO in the ublox modules in the motorola.
Could I get somehow the information via AT command, extended Qualcomm or via other method? I alredy can execute commands.
Using AT+CCLAC I obtained the following results.
Code:
&C
&D
&E
&F
&S
&V
&W
E
I
L
M
Q
V
X
Z
T
P
\Q
\S
\V
%V
D
A
H
O
S0
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S30
S103
S104
+FCLASS
+ICF
+IFC
+IPR
+GMI
+GMM
+GMR
+GCAP
+GSN
+DR
+DS
+CMEE
+WS46
+PACSP
+CFUN
+CLCC
+VZWMRUE
+VZWMRUC
+VZWAPNE
+VZWRSRP
+VZWRSRQ
+CNMPSD
+CBST
+CRLP
+CV120
+CHSN
+CSSN
+CREG
+CGREG
+CEREG
+CSCS
+CSTA
+CR
+CEER
+CRC
+CGDCONT
+CGDSCONT
+CGTFT
+CGEQREQ
+CGEQMIN
+CGEQOS
+CGCONTRDP
+CGSCONTRDP
+CGTFTRDP
+CGEQOSRDP
+CGQREQ
+CGQMIN
+CGEREP
+CGPADDR
+CGDATA
+CGCLASS
+CGPIAF
+CGSMS
+CSMS
+CMGF
+CSAS
+CRES
+CSCA
+CSMP
+CSDH
+CSCB
+FDD
+FAR
+FCL
+FIT
+ES
+ESA
+CMOD
+CEMODE
+CVHU
+CSQ
+CBC
+CPAS
+CPIN
+CMEC
+CIND
+CMER
+CGATT
+CGACT
+CGCMOD
+CPBS
+CPBR
+CPBF
+CPBW
+CPMS
+CNMI
+CMGL
+CMGR
+CMGS
+CMSS
+CMGW
+CMGD
+CMGC
+CNMA
+CMMS
+CHUP
+CCFC
+CCUG
+COPS
+CLCK
+CPWD
+CUSD
+CAOC
+CACM
+CAMM
+CPUC
+CCWA
+CHLD
+CIMI
+CGMI
+CGMM
+CGMR
+CGSN
+CNUM
+CSIM
+CRSM
+CCLK
+COPN
+CPOL
+CPLS
+CTZR
+CTZU
+CLAC
+CLIP
+COLP
+CDIP
+CTFR
+CLIR
+VTS
+ICCID
+CUAD
+CEAP
+CERP
+CSTF
+CSDF
+CEN
+CNMPSD
+CKPD
+CTSA
+CFUN
+CMAR
+CDIS
+CRSL
+CSO
+CSS
$QCSIMSTAT
$QCPBMPREF
$CREG
$CCLK
$QCCNMI
*CNTI
$QCCLR
$QCDMR
$QCDNSP
$QCDNSS
$QCTER
$QCSIMAPP
$QCPINSTAT
$QCPDPP
$QCPDPLT
$QCPWRDN
$QCDGEN
$QCPDPCFGE
$BREW
$QCANTE
$QCRPW
$QCSQ
$CSQ
$QCSYSMODE
$QCCTM
$QCBANDPREF
^PREFMODE
^SYSINFO
^SYSCONFIG
^CARDMODE
^DSCI
$QCVOLT
$QCHWREV
$QCBOOTVER
$QCDEFPROF
$QCMRUE
$QCMRUC
$QCAPNE
$QCPDPIMSCFGE
$QCCLAC
^SPN
$QCRMCALL
$QCDRX
$QCRSRP
$QCRSRQ
$QCACQDBC
$QCATMOD
$QCCOPS
^MODE
Updates [21/05/2015]:
In the attached file:
http://forum.xda-developers.com/attachment.php?attachmentid=3323307&stc=1&d=1432152310
+MCELL & +MCI are suitable for the needed task, but I'm not able to use the code before I reset the phone and the result of the commands was a 4 (no sense for me) and after the reboot an ERROR code appears.
Do I need to follow a certain command sequence or to active some concrete register??
I read about the AT+MODE=2 command to allow the execution of motorola extended commands. In my case this commands does not exist but AT^MODE is in the AT+CCLAC list. However, the unique possible values are (0-1) and I tried both and nothing happened with the +MCELL and +MCI commands and still return an ERROR code.
Thanks in advance.
jgoyao said:
Updates [21/05/2015]:
In the attached file:
http://forum.xda-developers.com/attachment.php?attachmentid=3323307&stc=1&d=1432152310
+MCELL & +MCI are suitable for the needed task, but I'm not able to use the code before I reset the phone and the result of the commands was a 4 (no sense for me) and after the reboot an ERROR code appears.
Do I need to follow a certain command sequence or to active some concrete register??
I read about the AT+MODE=2 command to allow the execution of motorola extended commands. In my case this commands does not exist but AT^MODE is in the AT+CCLAC list. However, the unique possible values are (0-1) and I tried both and nothing happened with the +MCELL and +MCI commands and still return an ERROR code.
Thanks in advance.
Click to expand...
Click to collapse
Could you provide some additional info?
Program you are using?
Device you are connecting to? Is it a MOTO G 4G LTE 1st Gen?
have you see this thread?
[A][SGS2][Serial] How to talk to the Modem with AT commands by E:V:A
I have a Teclast x 98 AIR 2 HG8N. I'd like to install a custom ROM, but don't want to lose the Windows 8 partition. I would like it to be rooted, as well.
Is there a thread with clear and tested instructions that specifically relates to the HG8N? I don't want to take a chance on bricking my tablet so I
haven't attempted to follow any of the general guides recommended for the Teclast x98 Air 3G or x98 Air 2
Thanks
I also have HG8N and I flashed Android ROM to Mirek's ROM. Check out :
http://forum.xda-developers.com/showpost.php?p=62024241&postcount=10608 (KitKat)
http://forum.xda-developers.com/showpost.php?p=62303068&postcount=11597 (Lollipop)
install included drivers and run batch file, follow screen instructions.
Hi,
Who knows how to run Kali-Linux on N8020 (Samsung Galaxy Note 10.1 LTE) in recovery-mode?
Kali is running in Linux-Deploy perfectly, but -
my Problem to run it in recovery-mode: the size of the boot.img (recovery.img) i have downloaded from the kali-website is 6 MB.
On my N8020 is the partition for this image only 4 MB!
shrinking the boot.img with abootimg doesn't work (updated too big......)
thank you very much
mark
Hi,
as described in the title I have a problem installing a Linux distribution using the app Linux Deploy on my Samsung Galaxy Tab S2 T-715 with android 6.0.1 installed (and rooted). I followed a million of guide and discussion of the web but anyone seems to have my same problem:
I set all the parameters as shown in many guides that I tested (this for example https://www.kali.org/tutorials/kali-linux-android-linux-deploy/) but when I try to configure or install or start I get only this output:
if I click "configure":
Code:
>>>>deploy
<<<<deploy
if I click "install":
Code:
>>>>deploy
<<<<deploy
if I click start
Code:
>>>>start
<<<<start
and anything else!!!
Has anyone an idea of the problem?
Thanks!
Your kernel doesnt support loop devices. Change kernel.
Phone model: Samsung J7 Neo (SM-J701F)
Firmware: Official Samsung firmware
Version firmware: J701FXXU7CSG4
Compiler: Linaro 4.9.4
Sources Firmware: https://opensource.samsung.com/
Wi-Fi Adapter: Tp-Link TL-WN722N v3
Hi, I bad at English, but I will try to explain my issue, I have Samsung J7 Neo (J701F) and I want to have possibility to connect external Wi-Fi adapter, I build kernel from official sources Samsung https://opensource.samsung.com/, I choose kernel for SM-J701F for J701FXXU7CSG4 firmware version, my compiler is linaro 4.9.4, I patch add-rtl88xxau-5.6.4.2-drivers-3.18.patch from https://gitlab.com/kalilinux/nethun...i-nethunter-kernel/-/blob/master/patches/3.18, and mac80211.compat08082009.wl_frag+ack_v1.patch https://patches.aircrack-ng.org/mac80211.compat08082009.wl_frag+ack_v1.patch, and change configs in .config how showed on kali.org, compilation was completed successfully, I recompile boot.img and successfully install on phone, kernel name will be changed in settings (Image 1), but when I connect external Wi-Fi adapter TL-WN722N, I don't have any system or another warning, what something was connected to phone, I open terminal and write 'iwconfig' and I don't see 'wlan1', only 'wlan0' (Image 2, 3), I search this issue, and found only similar issue, but for Samsung J7 2016 J710FN, but there user use custom ROM with Custom KaliNethunter, please help me or explain, what that.