well im rooted and would like to get some new look etc and any cool tested and trusted stuff out there i should try out then if u got the time plz do link them all here my first post and am new here
Model number : GT-S5570I
Android version : 2.3.6
Baseband verson : S5570IXXLI2
Kernel verson : [email protected] #1
Build number : GINGERBREAD.JPLI1
United Arab Emirates
i dont have any backup on rom so if u could direct me to an easy step by step how to back up and restore it thx in advance ^^ (i tried finding a way to do nandroid and clockworkmod but couldnt find anything)
also ROM Manager has no rom for my cell it says something like ROM Manager requires a custom recovery like ClockworkMod Recovery to install new software
all i did was root nothing after install titanium backup pro,ROM manager and ROM toolbox PRO how do i make the most out of them
Related
Hi guys
I've rooted a Ouku Horizon (P801W) and make a backup with Titaniun Backup Pro to my SDcard of all System and User apps and data.
I wanted to flash a new rom so I get Rom Manager and to backup my current rom (just in case) I installed the flash ClockWorkMod recovery ( I supose that was the first mistake, as I did not get from the list of phones my P801W I install another one)
Then I did "Backup Current Rom" and when the phone reboots it took forever freeze at booting in Ouku logo over black screen.
I soud backup the rom manualy but I didn't
Now I won a brick? or is recoverble?
hard reset (home buton + sound down + Power on) don't get me in to recover mode just no mather what I do it freeze at boot Orku logo.
Please help!!!!
can Odin software be a solution to flash the original or other rom again to the phone?
thanks guys
Yes odin should fix the problem just download original firmware and flash it with odin. Sorry usually i find the tut but now dont have much time.
thanks suki
I'll give it a try
does any one know how to put a Orku Horizon in download mode?
I tried all combinations of butons that I think of and no luck...
any insight?
I supose that Odin is a solution to my nerly bricket phone.
I should flash a recovery or a new compatible rom(?)
unfortunately from Ouku manufactory I can't get any kind of realy technical answer.
so I dont know how to proced with Odin...
my specs are:
Model number - P801W
Android 2.2.2
baseband version iris_p800 v1.20
Kernel 2.3.35.7perf.
[email protected]#3
Build nº FRG83G
software version Iris-p801W_v.21
Hardware version Iris_MP
any insight???????
pls
If you want an official rom just flash the rom using odin.
And for custom roms flash first CWM recovery, and then the rom you like.
I don't mind to put a custom rom in it, unfortunately I don't have any idea wich Rom to use.
If I put Cyanogenmod or Miui and if it is incompatible with Ouku Horizon android phone dont I brick it definitively?
does those custom roms support dual sim?
another thing is that I suppose I bricked my phone when I install a non specific CWM to Orku Horizon (P801W) through Rom Manager
because when it ask for the phone model mine wasn't listed so I chose a model that I tough was a generic...
(what a dumb ass!!!)
thanks a lot for your help Suky08
ROM for OUKU P801W
You can download the firmware for OUKU P801W on: Forum.China-iPhone.Ru
envenenador, have you tried the last tip?
how did it go?
and how did you manage to boot your phone. superclickone keeps on not working.
same with universal androot...
Hi guys
It´s my frist post but, I read this forum dialy (I have N7000, P6810 and i9300)
I have experience with SGSII and SGSIII with root and install much ROMs and kernels, modems...
My new Note N7000 (I buy late ) It´s to use in my business, I need one speed stock base ROM because default stock ROM It´s to slow...
This device is ICS 4.0.3 baseband XXLPT / kernel compilation XXLPY
I read in one post that It´s dangerous root or flashing this kernel version but not sure...
Can I flash my device normaly with I do in my SGSIII? (enter recovery, install CF-Root, install Mobile Odin Pro, copy an other ROM in ExtSDCard and finaly flash to recovery mode)
Thx
GoldFran1983 said:
Hi guys
It´s my frist post but, I read this forum dialy (I have N7000, P6810 and i9300)
I have experience with SGSII and SGSIII with root and install much ROMs and kernels, modems...
My new Note N7000 (I buy late ) It´s to use in my business, I need one speed stock base ROM because default stock ROM It´s to slow...
This device is ICS 4.0.3 baseband XXLPT / kernel compilation XXLPY
I read in one post that It´s dangerous root or flashing this kernel version but not sure...
Can I flash my device normaly with I do in my SGSIII? (enter recovery, install CF-Root, install Mobile Odin Pro, copy an other ROM in ExtSDCard and finaly flash to recovery mode)
Thx
Click to expand...
Click to collapse
See here and other links here.
Theonew said:
See here and other links here.
Click to expand...
Click to collapse
Good! I have an OSX OS and is beautyful for me, use a recovery rooted without PC.
first I use: Rooting with stock recovery Phil3759 PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip (My stock ROM XXLPY). This metoth install root + safe kernel, right?
Them, I install Mobile odin pro tu install for example Crach ROM v10.1
Only caution with no wipes with stock kernel I supose... When I install PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip, I can to wipes and install any ROMs safely
this package uninistall yellow triangle?
GoldFran1983 said:
Good! I have an OSX OS and is beautyful for me, use a recovery rooted without PC.
first I use: Rooting with stock recovery Phil3759 PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip (My stock ROM XXLPY). This metoth install root + safe kernel, right?
Them, I install Mobile odin pro tu install for example Crach ROM v10.1
Only caution with no wipes with stock kernel I supose... When I install PhilZ-cwm6-XXLPY-XEN-2.5-signed.zip, I can to wipes and install any ROMs safely
this package uninistall yellow triangle?
Click to expand...
Click to collapse
Just follow the instructions and all will go well. You should take the discussion there for further assistance .
Hi Friends I rooted my phone some days ago and today i tried to install chainfire3d but something went wrong during installing a driver from chainfire it rebooted and then stuck on samsung logo.. I can go to download mode and recovery mode but cant boot... i Think it's bricked... Now Please Friends give me step by step procedure to UNBRICK my phone..
My phone is Samsung Galaxy Pocket Neo Duos S5312 India...
Samsung Galaxy Pocket Neo Duos GT-S5312
OS:- Jelly Bean
Android Version:- 4.1.2
Baseband ver:- S5312DDAME4
kERNEL vERSION:- 3.0.15-1189709
[email protected] #1
Thu May 9 19:54:31 KST 2013
Build No:- JZO54K.S531212DDAME4
Please give me Step by Step process nof Unbricking my Phone... Thank you in Advance...
www.am27 said:
Hi Friends I rooted my phone some days ago and today i tried to install chainfire3d but something went wrong during installing a driver from chainfire it rebooted and then stuck on samsung logo.. I can go to download mode and recovery mode but cant boot... i Think it's bricked... Now Please Friends give me step by step procedure to UNBRICK my phone..
My phone is Samsung Galaxy Pocket Neo Duos S5312 India...
Samsung Galaxy Pocket Neo Duos GT-S5312
OS:- Jelly Bean
Android Version:- 4.1.2
Baseband ver:- S5312DDAME4
kERNEL vERSION:- 3.0.15-1189709
[email protected] #1
Thu May 9 19:54:31 KST 2013
Build No:- JZO54K.S531212DDAME4
Please give me Step by Step process nof Unbricking my Phone... Thank you in Advance...
Click to expand...
Click to collapse
what kind of recovery is it? the stock recovery it came with or a custom recovery like TWRP or CWM?
Rep Unbrick Android
Trozzul said:
what kind of recovery is it? the stock recovery it came with or a custom recovery like TWRP or CWM?
Click to expand...
Click to collapse
its stock recovery... I dont know what CWM, TWRP recovery is....
BTW Thanks for a fast reply.
the method
i know your problem dude this exactly same happen to me it happen because we are trying to install chainfire 3d in jellybean ,,ohh dude chainfire 3d is not for jelly bean or ics thats it corrupts system image
bro if u are new then you should know what is custom recovery it gives the full control for ur recovery means you can instal rom in ur phone with that recovery like installing windows i computer
HOW TO INSTALL CWM RECOVERY IN YOUR PHONE
I. Before You Begin
1. As always, back up everything you care about from your device before you start.
2. Charge your device to 75% or more before you begin.
3. Make sure you have the necessary drivers installed before you begin. If you are not sure, install Samsung Kies that should take of care of things for you.
II. Necessary Downloads
1. Odin_v3.07.zip
2. CWM-recovery-s5310-ODIN.tar.md5 [Link available on Step #2 of this post]
III. Flashing the Custom Recovery
1. Extract the Odin_v3.07.zip file you downloaded above to a folder on your desktop.
2. From the extracted folder, double-click on Odin3 v3.07.exe to run the tool.
3. Put your device into Download mode. To do this, power down your device, and press and hold the Volume Down + Home + Power buttons until you enter Download mode.
4. Click on PDA button, locate CWM-recovery-s5310-ODIN.tar.md5 you downloaded above and click on OK to load it on Odin. The ID:COM field on Odin should now light up yellow to signify that your device is connected and recognized properly. If not, reinstall Samsung Kies and try again.
5. Make sure that the Re-Partition and Flash Lock are unchecked; this is important as you might brick your device if these options are ticked!
6. Click on Start.
7. Once done, reboot your device.
You now have ClockworkMod Recovery installed on your Galaxy Pocket Neo!
and after download stock rom for ur phone and install it
.
.
.
.
go there [/B][/QUOTE]
if u dont want this mess up , just go to service center and spend some money
and if u like my lines please say thanxxx nd like my page fully tweaked on facebook
well I m confused at first i have to do flash of CWM custom recovery and then stock ROM? ? ? ? ... i saw in some videos and some tutorials they said direct ROM flash i mean no CWM direct flashing with stock ROM using ODIN... Also can i try oneclick unsoftbric will it work? ??
after flashing CWM will it work i mean will it unbrick... ? ? or i have to flash with stock ROm after that..
Also my phone is Galaxy pocket neo duos Gt s5312 not s5310 however both have same configuration but will it safe to do i.e. :- flashing with s5310 cwm recovery with s5312... ?
Try to flash direct to stock ROM download from samsung-updates / samfirmware with GT S5312 device
With Odin 3.7
hope this will normalize your phone.
Hey....now i am facing the same problem with my GT S5312 due to that Chainfire3D. so, did u get solve it? Help me up bro please.
hi sir
good morning
this is harish & i want to have my doubts clear about flash stock firmware, kernel, cwm recovery, unlock root pro. What are the advantages of the softwares earlier mentioned. plz inform me. Secondly I tried to download unlock pro free but link is corrupted. I want to root my phone as well.
I am using Quick Heal. when i dwnlod unlock root pro, quick heal says the file has moved and i don't get file. plz help me out. Also when i try to dwnlod firmware through the link, there i can't see the details for my device for which i want firmware.
My device:samsung galaxy s duos (7562)
android version: 4.0.4
Baseband Version: S7562DDBMJ1
Build No.-IMM76I.S7562XXBMJ1
hello everyone
im new in all of this rotting and costum ROM thing , i found a samsung gt-p7500 tab in my house and i decided to root it and install costume ROM becuse of the old android version on the tab
I download this ROM
https://forum.xda-developers.com/galaxy-tab-10-1/development/rom-android-7-0-nougat-t3471350
and download TWRP throw TWRP manager app and download version 2.2.1.5 thet match to my device, should i download diffrent TWRP device version? (is it mather whice device version i download in the first place?)
i treid to install the nougat ROM but I allwayes get the following fail:
https://drive.google.com/file/d/0B_esGc1OMYfsWWpJQ1A1M0ZyUDZ6Zm9tRFU4bWVlV1NfOWRz/view
and then installation of the ROM faild how can i fix it?