SESONN N9500 MTK6582 Quad core 1GB Ram 8GB Rom - Android General

Hi guy !!
I open this topic to try to figure out which terminal I arrived
the cell is equal to one aesthetic STAR N9500 ​​but seem to change a lot of things, which will report here to try to understand me and to find other "lost children" in my own terms: P
meanwhile photos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPU-Z result
CPU Architecture
ARM cortex-A7
Cores
4
Clock Speed
598-1,30 GHz
GPU Vendor
ARM
GPU renderer
Mali-400 MP
Model
N9500 (2106_v82_jbaol)
Manufactured
SESONN
board
2106_v82_jbaol
Display
9500_20131101
hardware
mt6582
android
4.2.2
kernel
armv7L
screen resolution
720x1280
screen density
320 dpi
System info:
MOLY.WR8.W1315.MD.WG.MP.V11.P2 2013/10/24 14:39
Kernel
3.4.5 [email protected] #1 Fri Nov 1 11:50:05
Build N9500_20131101
Antutu score 16992
1 Gb RAM - 8 Gb ROM
8Mpx rear camera
if anyone has this phone write it here, because on the internet I could not find anything, ROM, RECOVERY, or other
I have rootted with vroot

Equal, searching for better info
Hello,
my phone seems all equal to yours.
SESONN
CPU-Z result
Cores
4
Clock Speed
598-1,30 GHz
GPU Vendor
ARM
GPU renderer
Mali-400 MP
Model
N9500
Manufactured
SESONN
hardware
mt6582
android
4.2.2
screen resolution
720x1280
screen density
320 dpi
Kernel
3.4.5 [email protected] #1 Fri Nov 1 11:50:05
Antutu score 17069
1 Gb RAM - 4 Gb ROM
8Mpx rear camera
No idea either about ROM, RECOVERY, or other
I will root with vroot

we are only you and me?

http://www.needrom.com/mobile/starsesonn-n9500-mt6582/

how to change 1gb of internal memory?

xgiannak said:
Hello,
my phone seems all equal to yours.
SESONN
CPU-Z result
Cores
4
Clock Speed
598-1,30 GHz
GPU Vendor
ARM
GPU renderer
Mali-400 MP
Model
N9500
Manufactured
SESONN
hardware
mt6582
android
4.2.2
screen resolution
720x1280
screen density
320 dpi
Kernel
3.4.5 [email protected] #1 Fri Nov 1 11:50:05
Antutu score 17069
1 Gb RAM - 4 Gb ROM
8Mpx rear camera
No idea either about ROM, RECOVERY, or other
I will root with vroot
Click to expand...
Click to collapse
can you please go to the phone and dial to show the sensor information?
*#*#114#*#*
*#*#116#*#* (if the above one doesn't work for you)

stellasstar said:
can you please go to the phone and dial to show the sensor information?
*#*#114#*#*
*#*#116#*#* (if the above one doesn't work for you)
Click to expand...
Click to collapse
What do you know?
LCD
lcm LT050ANKP019A
Camera
ov8825_mipi_raw / gc2235_raw
Touchpanel
FT5406
Gsensor
KXTIK1004 Chip
Alps
apm_16d
Memory
Rom(64) + Ram (8)/Gbit

I have your same smartphone with the same CPU. I rooted it with vroot.
Inviato dal mio N9500 utilizzando Tapatalk

ilsaggio73 said:
Hi guy !!
I open this topic to try to figure out which terminal I arrived
the cell is equal to one aesthetic STAR N9500 ​​but seem to change a lot of things, which will report here to try to understand me and to find other "lost children" in my own terms: P
meanwhile photos
CPU-Z result
CPU Architecture
ARM cortex-A7
Cores
4
Clock Speed
598-1,30 GHz
GPU Vendor
ARM
GPU renderer
Mali-400 MP
Model
N9500 (2106_v82_jbaol)
Manufactured
SESONN
board
2106_v82_jbaol
Display
9500_20131101
hardware
mt6582
android
4.2.2
kernel
armv7L
screen resolution
720x1280
screen density
320 dpi
System info:
MOLY.WR8.W1315.MD.WG.MP.V11.P2 2013/10/24 14:39
Kernel
3.4.5 [email protected] #1 Fri Nov 1 11:50:05
Build N9500_20131101
Antutu score 16992
1 Gb RAM - 8 Gb ROM
8Mpx rear camera
if anyone has this phone write it here, because on the internet I could not find anything, ROM, RECOVERY, or other
I have rootted with vroot
Click to expand...
Click to collapse
Hello,
I know this is an old post, but you may like to read this
My company has band this device from there network
http://www.phonearena.com/news/Android-phone-built-in-China-comes-equipped-with-malware_id57159

Specs are exactly the same as the answer posted by ilsaggio73.
Few things I have discovered about this phone:
- rooted thanks to the app Framaroot
- investigating on the problem of Trojan in firmware, very serious. I finally disabled com.cube.activity and cancelled all the extra pieces it had downloaded
- now investigating on Play Store it seem there is an application that sits in front of Google Play Store and makes downloads from China. Any comment is appreciated.
- I do not have any rom to flash this device, but am searching for suggestions.
Thanks, xavier g.
stellasstar said:
can you please go to the phone and dial to show the sensor information?
*#*#114#*#*
*#*#116#*#* (if the above one doesn't work for you)
Click to expand...
Click to collapse

Related

[ROM]Flytouch 5 ICS Custom Firmware: The Blazing Dragon

Blazing Dragon ICS 2.1.1 - Android 4.0.3 - Made by Gaboros​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for any damage in your device. Use everything at your own risk and only if you sure you have the proper device!
Please read the FAQ before you post any question!​
Blazing Dragon ICS 2.1.1: http://www.mediafire.com/download.php?fzzaci4fzhr5a15
System app updates for 2.1.1 - 13-10-2012: http://www.mediafire.com/?9q4wd8wtc2bj58t
More high resolution screen shots: https://www.dropbox.com/sh/1kxjg8v21450ia0/hm-_kMywZj
Full installation and upgrade guide: http://www.text-upload.com/read,t11139
Previous Stock and Blazing Dragon ICS ROMs:
Stock ROMs for flash tool: http://www.mediafire.com/?7tq77i9ot5ks5
Blazing Dragon ICS ROMs for CWM recovery: http://www.mediafire.com/?x984448bo4g1g
Current features:
Code:
Android 4.0.3.
Deodexed.
Whole system structure change.
CWM based update.
Supports ad hoc network.
Designed for 10" instead of 7".
Has root by default.
Different boot.img.
Changed system apks.
Based on stock 0502.
Custom boot animation support.
The screen calibrate itself on first boot.
Market let you download more app then stock.
Pinch-to-zoom.
A lot of small improvement.
Statusbar toggle buttons.
Full changelog which contains every releases: http://www.text-upload.com/read,t11248
Full credits list: http://www.text-upload.com/read,t11056
Click here to donate​
Thank you! works very good!
I'm so proud I could cry lol
I'll get to work pulling the apps and framework and deodixng for you, I'll see if I can grab the framework and bluetooth drivers from 314 and port them over.
Thank you again! I'm also proud lol.
Deodexing not worked for me yesterday. The deodexing script went great, it deodexed every apk and framework jar from the system, but after pushing them back, it just gave me a boot loop.
I'm also working on it.
Im a noob at flashing roms. Can you please list the step by step
Download the flash tool and the rom, but in the same folder both. Press the reset on your tablet and when you release immediately press the menu+power button. In the flash tool select the ini file depend on you have 512 or 1 gb and for the other slot the vortex.pak and press the button... this is the short version
You can found the long here:
http://www.apad.tv/apadforum/showthread.php?2066-ibex-Flytouch-5-Wopad-System-Update
Ok does anyone know if i have the right tablet??
Model number: Android Tab10
Android Version: v2.2
Kernel version 2.6.32.9
Build number FRF85B
I have the ibex Flytouch 4 apad. will this work for me?? The link to the step by step was for the flytouch 5 wopad. I just want to be absolutely sure cuz I would really hate to brick this thing
ClicquotRose said:
Ok does anyone know if i have the right tablet??
Model number: Android Tab10
Android Version: v2.2
Kernel version 2.6.32.9
Build number FRF85B
Click to expand...
Click to collapse
I don't think so...
ClicquotRose said:
I have the ibex Flytouch 4 apad. will this work for me?? The link to the step by step was for the flytouch 5 wopad. I just want to be absolutely sure cuz I would really hate to brick this thing
Click to expand...
Click to collapse
I don't know... I know that the Flytouch 5 and 6 is the same but I don't know about the 4, sorry.
you need a cortex a8 which is: Flytouch 4s/5s/6/7/V10
one question: i have a huge battery drain. do you have this also?
Does bluestack drain the battery ?
naf said:
you need a cortex a8 which is: Flytouch 4s/5s/6/7/V10
one question: i have a huge battery drain. do you have this also?
Click to expand...
Click to collapse
Better drain is the bug of the stock rom, and because we don't have the source I haven't found a workaround yet. Hopefully it will be fixed in the stock rom soon. One thing is for sure: it not use deep idle mod, so it almost drain as fast as when your screen is off, when it on. (except the screen, of course). But if you power off your device totally when you not use it and it only turned on when you use it, the battery just similar to 2.3.
http://ap.viewsonic.com/my/kbase/article.php?id=728
This is the kernel source from viewpad 10s VC882 Cortex a8
also discussed here:
http://forum.xda-developers.com/showthread.php?t=1617759
naf said:
http://ap.viewsonic.com/my/kbase/article.php?id=728
This is the kernel source from viewpad 10s VC882 Cortex a8
also discussed here:
http://forum.xda-developers.com/showthread.php?t=1617759
Click to expand...
Click to collapse
Wow! Thanks! But I don't think this is the same device but it could work... to tell you the truth I not really want to modify the kernel. It could be dangerous... But I take a look at it.
Yesterday I got a weird idea. Port the Clockworkmod recovery to our device.
It could be very useful but currently I don't know I have enough knowledge to do that.
Edit: just now see what you linked contain the source of the recovery... I just try to compile it, and see is it working on our device or not. Maybe we have a change to clockwork recovery?
I just got a tablet as a gift. On the box it says SuperPad VI, but on the sales receipt it says Tablet PC SuperPad IV. In settings it just says MID. Is it one of those tablets you are speaking of here? I would like to root it. Sorry it is my first tablet and i am still a noob on it.
claus1953 said:
I just got a tablet as a gift. On the box it says SuperPad VI, but on the sales receipt it says Tablet PC SuperPad IV. In settings it just says MID. Is it one of those tablets you are speaking of here? I would like to root it. Sorry it is my first tablet and i am still a noob on it.
Click to expand...
Click to collapse
As mentioned before my naf:
you need a cortex a8 which is: Flytouch 4s/5s/6/7/V10
So it should work.
do you have android 2.2 installed? then 90% possibility of being a ft4. android 2.3 could be a superpad 6. or FT6
If you're not sure what tablet you have then download any of the benchmarking apps off the market and see what CPU it says you have.
If it says it's an X220 then you have a DISCO, P041 or SAWEE these are Froyo 2.2, there's some that have been sold with the build.prop edited to say they are Gingerbread 2.3 but they aren't, they are still 2.2
If it's a Cortex A8 then this rom will work on it, but only if it's a 10 inch resistive screen.
Thanks for your answers, i installed android system info and it gives following data among other
Andriod version 2.3
cpu abi armeabi v7a
maker vimicro
device vortex
screen 1024x600 160 dpi
processor armv7 processor rev 2
vimicro vortex android 2.3.... you have a superpad VI...
This is the Mediafire Folder from Gaboros:
http://www.mediafire.com/?0zcplz34db4pq
there you will find your firmware and flashtools...

Jiayu F1 - $50 4" 480x800, dual 1.3ghz MTK6572, 512mb ram, 4GB rom, 5mp 720p

Hi everyone, the jiayu f1 has been leaked, it will cost $50 in china so that will be around $85/£55 shipped internationally which is stunning value.
Here is the leak: Mod Edit: Links removed
It will run Lewa OS (android based) running android 4.2.2. Hopefully someone will make a cyanogenmod 11 rom as android 4.4 is optimised for 512mb ram.
Specs:
Android 4.2.2
4" 480x800 screen Sony TFT
dual core 1.3ghz mediatek MTK6572
mali 400 gpu with 720p h264 support
512mb ram
4GB Rom
5mp camera with autofocus
0.3mp front camera
LED flash
micro sd slot (upto 64GB)
2400mah battery
Sensor - Distance/light/gravity
Additional - WIFI/Bluetooth/FM/GPS
Networks - GSM/WCDMA dual-sim
WCDMA - 2100Mhz
TD - 1900/2100mHz
GSM - 850/900/1800/1900MHz
Dimensions 62.5 x 124 x 10.5mm
sam43 said:
It only has 521MB RAM, so anyone checked the real running storage? What's the remained storage except OS?
Click to expand...
Click to collapse
I have Ordered it already(TD ver) and I should receive it in this week I hope, I will post a review .
Stay tuned .
Update: I got the phone few days ago and just posted full review in another forum, you can check it here
Thank you justmpm for the advice .
I can summarize the long review and say that this is the best quality, well made, fully working out of the box device under 75$ - you an tell that there is good brand behind it.
here is the review pictures for more info:
You also are invited to like JIAYU F1 page and stay tuned with FW updates and more + see the first Drop test results
https://www.facebook.com/Jiayu.F1.WCDMA (plz remove if it's not OK)
What's in the box:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Build Quaity:
Screen Viewing angles:
F1 16bit LCD vs 260K ZTE V889S:
CPU-Z Info:
Benchmarks:
Notification Led: red(low battery/charging) Blue(missed call/New SMS/charge ended)
Camera Sensor Info:
Camera Samplles:
Click To view full size
Battery size comparison VS ZTE V889S
GPS Test:
How Xda-developers look's on tiny 4-inch Jiayu F1 :
Update - thanks to justmpm advice I have posted the review here too - enjoy from the best sub 75$ smartphone!
Xperia-Ray said:
Update
Click to expand...
Click to collapse
Pls share CWM for Jaiyu f1 and root method for the same..
THANKS
It is very easy:
https://play.google.com/store/apps/details?id=es.jiayu.jiayuid
You get everything you need in their app! why other brands don't have app like this?.
Xperia-Ray said:
It is very easy:
https://play.google.com/store/apps/details?id=es.jiayu.jiayuid
You get everything you need in their app! why other brands don't have app like this?.
Click to expand...
Click to collapse
Does it have root method and CWM?
Thanks
of course ,
I have downloaded and installed CWM with this app, its working fine and its in english but the screen in recovery is upside down, lol. Is it just me or?
same 4 me to- LOL,
But is have a probem- can't enter to CWM with the old power+vol+ method- can you?
Every bootoop I need to Flash stock rom via SP flashtool ,Root and boot to recovery and restore
Trying to port ColorOs .
I cant enter recovery with power+vol+ aswell , i use this app to enter recovery.
I wish we had some more ROMs for this phone, maybe AOSP / Cyanogenmod lol. :laugh:
I am already working on it ,
Got light clean rom from Jiayu forums in china- going to tweak it and then I will update about it on my F1 Facebook page .
The problem with entering to recovery from boot just slow's me down .
With the new rom you can use the clock area on status bar as power button -no need to click the power button to lock the screen.
Does this phone have compass?
Sent from my A26B using XDA Free mobile app
Stock Rom's for CWM uploaded to needrom:
stay updated for new custom rom's on JIAYU F1 page:
Xperia-Ray said:
Stock Rom's for CWM uploaded to needrom:
stay updated for new custom rom's on JIAYU F1 page:
Click to expand...
Click to collapse
i see no threads of Jiayu f1 on XDA. i hope ppl will show interest in its devlopment soon.
Omg this is amazing, Xposed (& Gravity Box) is working with this phone.
So now i have Advanced Restart menu and i can restart directly to Recovery without using Jiayu app, and also easy access to make screenshots.
Tried some Status Bar mods and they work fine aswell.
Xperia-Ray said:
I am already working on it ,
Got light clean rom from Jiayu forums in china- going to tweak it and then I will update about it on my F1 Facebook page .
The problem with entering to recovery from boot just slow's me down .
With the new rom you can use the clock area on status bar as power button -no need to click the power button to lock the screen.
Click to expand...
Click to collapse
Can you please share the clean rom untouched?
I have already done it- check the JIAYU F1 Facebook page to be updated
http://www.needrom.com/mobile/jiayu-f1-rom4cwm/
Ported CWM and CTR recoveries
I ported two recoveries for this phone, WCDMA version.
1, CWM 6.0.1.2 - ported from [email protected] ZTE V970 recovery.
This recovery is upside-down! (aka "Batman recovery" )
Download
md5sum: b438fd56cad9268d58aecca06324bb9f
size: 5,7 MB (5955584 bytes)
2, Carliv Touch Recovery 2.2 - based on his porting thread @xda
Download
md5sum: bb06c852d4268b58f74b75458f42717a
size: 5,6 MB (5912576 bytes)
I am working on the repartition, meaning the internal SD card and the data partition will be migrated (and will have approx. 2,5GB data partition)
Installation of recoveries
If your phone is rooted, you can use Mobileuncletools from play store, and follow this instruction (option 2). Note, that the files in that post are not suitable for F1, but the method is good.
If your phone is not rooted, then you need to use SP flashtool.

[Q] Root for Alcatel One Touch Tab 7 Dual Core?

Hi everybody!
Is it possible to build a root for Alcatel One Touch Tab 7 Dual Core?
These are the device specifications:
Size:194 x 121 x 11.6 mm
Weight:353 gr
Screen:7 inch
Display:TFT display, 1024 x 600
Operating System: Android 4.2.2
Application Processor: Amlogic AML 8726MXS
CPU: 1.5 GHz ARM Cortex A9, Dual core
System Memory: 1GB RAM DDR3
Storage Capacity: 4GB NAND Flash
Wi-Fi: 802.11 b/g/n
Bluetooth: N/A
Audio & Video Play: Built-in audio chip, 1080P HD playback
External Interface: Micro USB, Micro SD
Battery: 3000mAh
Camera: Front 0.3 Mpixel,Rear camera 2.0Mpixel(for LATAM)
Thanks!
Thanks to everyone for your help! =P
MariuxReloaded said:
Thanks to everyone for your help! =P
Click to expand...
Click to collapse
you have found any solution for root this tablet? I don't find anything :/
Root for Alcatel One Touch Tab 7 Dual Core
at long last, finally rooted my Alcatel OT Tablet Dual core last night. exactly the same specs posted by MariuxReloaded.
i used VRoot version V.1.7.7 the latest version.
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
xda regulations say i have to make 10 posts before i can attach links
---------- Post added at 03:28 PM ---------- Previous post was at 03:22 PM ----------
MariuxReloaded said:
Hi everybody!
Is it possible to build a root for Alcatel One Touch Tab 7 Dual Core?
These are the device specifications:
Size:194 x 121 x 11.6 mm
Weight:353 gr
Screen:7 inch
Display:TFT display, 1024 x 600
Operating System: Android 4.2.2
Application Processor: Amlogic AML 8726MXS
CPU: 1.5 GHz ARM Cortex A9, Dual core
System Memory: 1GB RAM DDR3
Storage Capacity: 4GB NAND Flash
Wi-Fi: 802.11 b/g/n
Bluetooth: N/A
Audio & Video Play: Built-in audio chip, 1080P HD playback
External Interface: Micro USB, Micro SD
Battery: 3000mAh
Camera: Front 0.3 Mpixel,Rear camera 2.0Mpixel(for LATAM)
Thanks!
Click to expand...
Click to collapse
i used Vroot and successfully rooted my tablet.
Root for Alcatel One Touch Tab 7 Dual Core
download link: http://www.mgyun.com/vroot
references link: http://tabletrepublic.com/forum/android-hacking-tweaking/chinese-root-software-4763.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At last, someone did it!!!
Thank you very much boybluecancer! When I come back home from my travel, I will root my Tab! Thank you again! :laugh:
HI
I download Vroot but when I click on root, it started to load but when it gets on the 3rd step it appears something in chinese and an X above the letters pls help
Boybluecancer, could you tell us all the steps of the root procedure, please?
Unluckily, the latest version of Vroot in English is the 1.7.3 First, I'll try with the English version, and if it fails, I'll try with the latest version in Chinese and I'll let you know in a few days!
Yes guys, it works! You must enable "Unknown sources" and "USB Debug"!
Thank you very much, Boybluecancer!
Worked for me, first tried with the 1.7.3 english version but it didn't work, so i downloaded the newest, 1.7.8 and it was in english and worked just fine
BenceTb said:
Worked for me, first tried with the 1.7.3 english version but it didn't work, so i downloaded the newest, 1.7.8 and it was in english and worked just fine
Click to expand...
Click to collapse
Yeah, exactly Bence: the English version is not updated, then, the root only works with the Chinese version!
Sorry for my bad english.
I used the program to make the root and everything went well, but now i have a seriuos problem.
Root Uninstaller is bugged in Alcatel One Touch Tab 7 Dual Core, i have selected same unnecessary app like Google Chrome ecc and the program has removed some the apps system. Now the tablet is unusable, can anyone tell me if there is a rom to flash or I can make the screen of your One Touch Tab 7 app to see what's missing? so I try to look for what's missing on the internet and install them :crying::crying::crying:
andream8891 said:
Sorry for my bad english.
I used the program to make the root and everything went well, but now i have a seriuos problem.
Root Uninstaller is bugged in Alcatel One Touch Tab 7 Dual Core, i have selected same unnecessary app like Google Chrome ecc and the program has removed some the apps system. Now the tablet is unusable, can anyone tell me if there is a rom to flash or I can make the screen of your One Touch Tab 7 app to see what's missing? so I try to look for what's missing on the internet and install them :crying::crying::crying:
Click to expand...
Click to collapse
Did you try a factory reset?
Unfortunately, I don't have my tablet here, because I'm not at home, so I cannot show you all the apps
Ok,I solved alone. But someone can attach a copy of the file DownloadProvider.apk and DownloadProviderUi.apk ??? I I've tried several files of different rom but don't work and it's impossible download app in Google Play Store without those files :crying::crying::crying:
hi.
can u help me with my tab 7 dual core...my tab problem is that it hangs up it only at the boot logo..and when i try to factory reset it in the recovery mode..it hangs up also..it won't continue to erase everything..please help..how to fix this?can this be repaired?or does it needs to be reprogram?
mackobekz said:
can u help me with my tab 7 dual core...my tab problem is that it hangs up it only at the boot logo..and when i try to factory reset it in the recovery mode..it hangs up also..it won't continue to erase everything..please help..how to fix this?can this be repaired?or does it needs to be reprogram?
Click to expand...
Click to collapse
Hi Mackobekz, I think your Tab is bricked :/ The best thing you can do now is to bring it to an expert who can help you for the unbrick, because, unfortunately, I can't find any Alcatel firmwares on the Net
I own an Alcatel OT P320x tab and I would like to root and flash Mahdi rom (4.4.4) if it is possible! It runs perfetly on my galaxy s4 and I would like to know how to do it in my tablet. Any ideas??
Sent from my ALCATEL ONE TOUCH P320X using XDA Free mobile app
sokolis3007 said:
I own an Alcatel OT P320x tab and I would like to root and flash Mahdi rom (4.4.4) if it is possible! It runs perfetly on my galaxy s4 and I would like to know how to do it in my tablet. Any ideas??
Sent from my ALCATEL ONE TOUCH P320X using XDA Free mobile app
Click to expand...
Click to collapse
Hi Sokolis!
Honestly, I can't tell you if it's possible, this is the Alcatel One Touch Tab 7 Dual Core thread, find the right thread for your device
alcatel tab7 dual core boot
Hi, can someone tell me how to go to boot loader on this device? I wanna try to install ubuntu on my device.

Samsung Galaxy Core Prime VE (G361H) [Master Thread] {Updated 1/6/2017}

This is the Master thread and Index for the Galaxy Core Prime Value Edition (SM-G361H), here you can find: guides, Root, and ROMs and development, news, info, discussions, you can also ask anything about this phone and more, it's like an Index thread and a separate forum in a thread.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone specifications:-
Screen: 4.5" WVGA (480×800) LCD TFT screen, 16 million colour.
Touchscreen: Capacitive, multi-touch (2/3 fingers).
CPU: 1.3GHz quad core cortex A7 ARMv7 neon CPU 32bit.
RAM: 1GB.
Memory: 8GB internal (5.30GB user available), micro sdcard slot up to 64GB.
Chipset: Spreadturm sc8830.
GPU: mali-t400mp2 (dual core).
Device code name: coreprimeve3g.
Sensors: proximity sensor, accelerometer.
GPS: equipped, with A-GPS, GLONASS, Beidou.
Wi-Fi: equipped, Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot.
Bluetooth: equipped, v4.0, A2DP.
Network: GSM(2 SIMs) / HSPA(1 SIM).
Network speed: HSPA 42.2/5.76 Mbps.
Dual micro SIM.
Main camera: 5mp, auto focus, LED flash, [email protected] video.
Front facing camera: 2mp, 640p video.
Battery: Li-Ion 2000 mAh.
Android: 5.1.1 lollipop, API level 22, ART 2.1, TouchWiz user interface.
Dimensions: 130.8 x 67.9 x 8.8 mm.
Weight: 130 grams.
Released: 2015.
Specifications source: gsmarena website, CPU-Z android app, Spec device android app.
How to ROOT ?:-
Follow this link: here
You can join our official groups on Social networks and Apps for a more NOOB friendly way to get updates, asking questions, sharing knowledge with other users and having some fun. Links:
Facebook Group
Whatsapp Group
Telegram Group
Some Notes for forum's moderators:
1-sorry if this is the wrong place for this thread, if it is the wrong place please move it to the right forum, and please don't delete or close this thread if there is anything wrong please inform me and I'll surely fix it
2- is there any way to get a separate Q&A thread?...thanks.
Sent from my GALAXY Core Prime (G361H) using Tapatalk
ROMs
Reserved #1 for ROMs.
##Stock ROMs:
1-Stock ROMs can be found here at sammobile. Link: http://www.sammobile.com/firmwares/database/SM-G361H/
2-Another option for stock ROMs (non sammobile). Link: http://forum.xda-developers.com/showthread.php?t=3292939
##Modded Stock ROMs:
☆Pre-Rooted Stock ROM:
1-Russian pre rooted ROM here
2-Another pre rooted ROM link
☆De-Odexed stock ROMs:
1- Deodexed stock by: 4Pda forum members
https://yadi.sk/d/PhM9-JaPoN8vs
##Custom ROMs:
#Based on Android 5.X Lollipop :
☆CyanogenMod 12.1:
Cyanogen mod 12.1 {5.1.1} by @Dreamstar
Thread link
#Based on Android 6.X Marshmallow :
☆Cyanogen Mod 13
Cyanogen Mod 13 {6.0.1} by @doesntexits
Thread link
#Based on Android 7.X Nougat :
☆Lineage OS 14:
Lineage OS {7.1.x} by @redShaman
Thread link
☆Resurrection Remix:
Resurrection Remix N {7.1.1} by @redShaman
Thread link
☆Android Open Kang Project {7.1.2}:
Thread Link
Sent from my GALAXY Core Prime (G361H) using Tapatalk
Reserved #2 for Kernels and Recoveries.
##Kernels:
☆custom kernel by clarC (4PDA.ru forums) Original Post
For stock and stock based ROMs Only, Features:
1- OC mali400mp2 GPU to 500Mhz
2- SElinux can now be set to Permissive
3- CPU frequency can be set to (533,600,800,1000,1150,1300,1450,1500)MHz
4- Added CPU Governors: (powersave, ondemand, conservative, userspace)
5- Support F2FS file system, NTFS.
Link: Download link Odin flashable
Download link TWRP flashable
☆Vegito kernel by @Dreamstar
For all ROMs
Link : here
##Custom Recoveries:
1- TWRP v3.0.2-0
link:here
Sent from my GALAXY Core Prime (G361H) using Tapatalk
Reserved #3 for themes, mods, and app ports
##Status bar mods:
☆for stock ROM:
1- Abdu M simple mod by @Abdullaharis
Thread link
2- Coloured systemUI collection by @Abdullaharis
Thread link
Reserved #4 for Guides
#Guides:
1- How to install Viper4android FX (with a link of a working version): http://forum.xda-developers.com/android/development/guide-install-viper4android-fx-galaxy-t3316771
Rooting method is all you need now XD
waiting for proper root
Sent from my SM-G361H using XDA Free mobile app
Waiting for root
Thanks for it
Thank you for it and I have a question; how can ı compact my domain with it? Is it possible? check out: myradiolisten.com
Has anyone tried following?
h.t.t.p.:././.w.w.w...g.s.m.h.o.s.t.i.n.g...i.n./.2.0.1.5./.0.9./.r.o.o.t.-.g.3.6.1.f...h.t.m.l
saadpal said:
Has anyone tried following?
h.t.t.p.:././.w.w.w...g.s.m.h.o.s.t.i.n.g...i.n./.2.0.1.5./.0.9./.r.o.o.t.-.g.3.6.1.f...h.t.m.l
Click to expand...
Click to collapse
The G361F have a different chipset than the G361H so it might brick your phone or cause a bootloop..i don't suggest you to try it
Sent from my GALAXY Core Prime (G361H) using Tapatalk
myradiolisten said:
Thank you for it and I have a question; how can ı compact my domain with it? Is it possible? check out: myradiolisten.com
Click to expand...
Click to collapse
I still didn't get what you mean....can you explain more?
Sent from my GALAXY Core Prime (G361H) using Tapatalk
Mr said:
I still didn't get what you mean....can you explain more?
Sent from my GALAXY Core Prime (G361H) using Tapatalk
Click to expand...
Click to collapse
Looks like spam
---------- Post added at 01:26 PM ---------- Previous post was at 01:15 PM ----------
@Mr,bluwe check this link please
https://chimeratool.com/supportedmodels
They say our phone is supported. But im not understand. This system need box or not. Please check it.
@kasvet-efza I'll try this tool now and I'll report back...however i don't think it will work because root needs SeAndroid to be off or you'll fall in a bootloop, and disabling SeAndroid on Samsung's new phone's isn't easy at all....however I'll give this program it's chance to fame if it success...
Wait for my reply and the test results...
Sent from my GALAXY Core Prime (G361H) using Tapatalk
Okay waiting your good news. Hope you will
kasvet-efza said:
Okay waiting your good news. Hope you will
Click to expand...
Click to collapse
I just forgot to tell you...it didn't work...
For this phone no app can root it as you must disable SeAndroid or you'll get a bootloop...and SeAndroid can only be disabled by using a modded kernel...and we don't have till now..
Sent from my GALAXY Core Prime (G361H) using Tapatalk
@Mr,bluwe bad news again, hope someone will find a way soon ?
any G361F user confirming its working? hopefully, soon there will be similiar solution for the G361H too.
Sent from my SM-G361H using XDA Free mobile app
Hello
Please, we want an urgent solution to the problem of Root G361H device :crying:
We are all eagerly await creativity
With thanks to your efforts, your brother Ahmed from Syria wounded. :fingers-crossed:
Hi bro I found root file but is the look paid to download it! Can anyone download it and share it?
http://filesgsm.com/showthread.php?16692-G361h

problem with subtitles

hi everyone i have last of MIX Player when i want watch any movie i click menu and subtitle and online subtitle after that i cant open search or rate or Upload ?
can anybody help me
i have MIX Player Pro install and all code
thanks
This is pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G930F using Tapatalk
stkf10 said:
This is pic
Click to expand...
Click to collapse
Some OEMs have switched the way opening files with external apps. It will not happen if you use a third party filemanager or when you directly open files from MX Player itself.
We are already working on it. MX Player 1.9.0 will adress this issue.
Thirumalai.K said:
Some OEMs have switched the way opening files with external apps. It will not happen if you use a third party filemanager or when you directly open files from MX Player itself.
We are already working on it. MX Player 1.9.0 will adress this issue.
Click to expand...
Click to collapse
Thanks to you its working when the new version release.
Sent from my SM-G930F using Tapatalk
Cannot Search online subtitle
My problem also same. I already downloaded the latest version 1.9.16, but the problem still occur. When i click the online subtitles, all the button there is inactive. What I need to do ?
Qisha said:
My problem also same. I already downloaded the latest version 1.9.16, but the problem still occur. When i click the online subtitles, all the button there is inactive. What I need to do ?
Click to expand...
Click to collapse
Immediately after playing the file that has issues, Kindly collect a bug report from MX Player help menu & share here.
It will help us to understand the issue better.
Thirumalai.K said:
Immediately after playing the file that has issues, Kindly collect a bug report from MX Player help menu & share here.
It will help us to understand the issue better.
Click to expand...
Click to collapse
hi, thanks for the reply. Below the bug report
App: MX Player (1.9.16)
Manufacturer: samsung
Model: GT-N5100
Brand: samsung
Version: 4.4.2 (REL)
Build: samsung/kona3gxx/kona3g:4.4.2/KOT49H/N5100XXDNJ2:user/release-keys
Kernel: Linux version 3.0.31-2937092 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Oct 15 18:09:18 KST 2014
CPU: 4 core(s) 1.6 GHz (family:1 features:63)
CPU architecture: 7 (os.arch: armv7l)
CPU features: swp half thumb fastmult vfp edsp neon vfpv3 tls
Board platform: exynos4
Instruction set: armeabi-v7a armeabi
Resolution: 1280 x 800
Available screen size (DIP): 961 x 576 (smallest: 600)
Tablet: true
Screen size: Large
Density: 1.3312501 (213)
Font scale: 1.0
Hardware main button: true
Touch screen: true
TV: false (uiMode:17)
Locale: en_US
Total memory: 1869480 kB (1869480kB)
Free memory: 142484 kB
The screenshot same like previous report, i don't know how to post here using phone..very sorry.
Many thanks
Qisha said:
hi, thanks for the reply. Below the bug report
App: MX Player (1.9.16)
Manufacturer: samsung
Model: GT-N5100
Brand: samsung
Version: 4.4.2 (REL)
Build: samsung/kona3gxx/kona3g:4.4.2/KOT49H/N5100XXDNJ2:user/release-keys
Kernel: Linux version 3.0.31-2937092 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Oct 15 18:09:18 KST 2014
.............
The screenshot same like previous report, i don't know how to post here using phone..very sorry.
Many thanks
Click to expand...
Click to collapse
This is just the system info. When you collect the bug report, just check everything & save the file to the storage. Then share here.

Categories

Resources