Related
Can some1 pls post a screenshot of DSP manager settings to get maximum effect on GFit ??
My settings...pretty happy with it...
Cyanmobile, with stock headsets...
Sent from my g-fit using xda premium
Just use the settings mentnd below
Dynamic range compression slight
Bass boost moderate
Equalizer rock
Headset Virtualizer room
Sent from my GT-S5670
Do this. you will not regret it.
Dont use bass boost.
Do this in costom equalizer-
Keep the first and last bar high. You can experiment with the middle 3 bars as u like.
Dont turn on any compression and bass boost. Use virtual room as u like.
Here is the audio effects that i ever feel the greatest.
It is
ViPER4Android [V4A]
Here is official page http://forum.xda-developers.com/showthread.php?t=2191223
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version: FX version 2.2.1. 1/ XHiFi Merged
Operating environment: Android 2.3 / 4.0 / 4.1 / 4.2 / 4.3
★ Android 4.3 Support ★
ViPER4Android supports Android 2.3 Ginger bread, 4.0 Ice Cream Sandwich and 4.1 upto 4.3 Jelly bean firmwares.
★ NEW Channel Pan ★
Controls left/right channel output. Its not very useful unless your headphone is imbalance or faulty one side. It will be a cure for you.
★ NEW Differential Surround / Haas Effect ★
This is an old feature which ViPER520 had removed from FX in early days.
But after many users requesting it, ViPER520 bring it back to FX
More info on Haas Effect: http://www.mixcoach.com/creating-dep...haas-effect-2/
★ NEW ViPER Fidelity Control ★
★ ViPER Bass ★
With 2 bass mode, you can have greater bass experience than before! This requires a little bit better headphone.
★ ViPER Clarity ★
With the latest Clarity mode selection, you can balance up heavy bass with high clarity audio that you can never imagine before!
★ NEW Headphone Surround Engine+ ★
★ NEW Cure Tech+ ★:
With normal audio system, listening for more than three hours will feel fatigue, dizzy, tinnitus, irritated and other symptoms. This is a normal reaction, heavy bass and high volume could cause permanent damage to the human auditory system, but other phenomena can restore through resting.
Viper as a listening experience professional will not ignore this problem. Therefore put a lot of effort to study how to make a "Healing" sound technology, just a small success. But thinking on how to let users experience it.
★ NEW In-App Installation ★:
With this in-app installation, users just have to follow the instructions when first run V4A app and the app will install everything for you.
In order to use this feature successfully, full Busybox must be installed.
★ NEW Compatible Mode (Only in 4.x) ★:
Compatible Mode supports large variety of music players and the players' own EQ/sound effects (system-provided/third party)
Therefore, you don't have to select V4A in Sound Settings > Music Effects, choose anything other than V4A. Just run V4A app and the effects will be working with anything else.
1. In option, switch to Compatible Mode. Reboot, done.
2. In Sound Settings > Music Effects, choose other than V4A.
3. Run V4A app and configure the settings then the effects will work together with the one you chose in Sound Settings.
★ NEW Safe Mode (Only in 4.x) ★:
If V4A dont work on many players, try switching to Safe Mode to work with almost any music player.
1. In option, switch to Safe Mode. Reboot, done.
Bugs/Issues:
1. Driver status in FX Compatible Mode always NO. Driver status will show YES in normal mode.
Latest Version Changelogs
FX version: v2.2.1.1
1.Add differential surround (Haas effect).
2.Add channel pan setting.
3.More settings for field surround.
4.Support android 4.3.
FX version: v2.2.1.0
1.Added XHiFi Clarity mode.
2.V4A XHiFi stopped development.
For your information:
XHIFI Hi Clarity = FX Viper Clarity > XHiFi Clarity Mode.
XHIFI Lo Contour = FX Viper Bass > Natural Bass Mode.
FX version: v2.2.0.9
1.Add fidelity control system.
2.Optimize Headphone Surround Engine+ for VFP platform.
3.Fix some bugs.
4.Add update check.
FX version: v2.2.0.8
1.Add Headphone Surround Engine+.
2.Fix some bugs.
XHiFi version: v2.1.0.2
1.Support speaker effects.
2.Fix some bugs.
Click to expand...
Click to collapse
DOWNLOADS
FX version v2.2.1.1 : http://www.mediafire.com/download/7t1c73wsz4qiygu/ViPER4Android_FX_2211_en.zip
XHiFi version v2.1.0.2 : http://d-h.st/4WM
Sony Xperia New S.Enhance IR Samples Rev2: http://forum.xda-developers.com/showthread.php?p=41320703
Creative ZEN X-Fi IR Samples: http://forum.xda-developers.com/show....php?t=2308239
IRSamples for Convolver(Updated 15Apr) : http://www.mediafire.com/download/9am1sogfq9lm31d/en_IRSamples_331+IR.zip
For more IR samples, visit V4A IR Sample Index Thread with Official Mirror, all new IR samples were uploaded here : IRSamples
HighDefinition Impulse Responses Samples (IRS) - (stereo, 24bit, bitrate: 2823 kb/s, 44100 Hz, 2 channels)
BBE 1-5
Unofficial V4A Tool by a vipersaudio member - Fix FX not working for many players below 4.3:
http://d-h.st/c4Z
Click to expand...
Click to collapse
INSTALLATION
Require Rooted,BusyBox
Which to install? FX or XHiFi or Both?
A: FX has many audio effects, where as XHiFi restores audio quality. If you like many effects(reverb, bass, surround) then choose FX, if you like clear audio/vocal and you have a good headset, choose XHiFi. You can also install both, more CPU usage, that's all.
[FX/XHiFi version]
1. Extract zip
2.Choose correct android version & Install ViPER4Android.apk
2. Run app, when prompt, choose Yes to "install/update".
3. Choose correct CPU Type. (Instructions include in your downloaded zip)
4. Reboot device.
Option1. Choose V4A(either fx or xhifi) in sound settings > music effects (Don't worry, both fx and xhifi wil run together)
Option2. Dont touch sound settings, open up both(fx and xhifi), in option, switch to FX Compatible Mode, reboot.
Update To Latest Version
1. Download latest FX and XHIFI apks
2. Copy to system/app to overwrite // OR // Install like normal and replace previous version.
3. Open up FX and XHIFI, Choose "Install/Update"
4. Reboot, done.
UNINSTALLATION
1. In both FX and XHiFi app, go option and choose uninstall driver.
2. After that, uninstall the apk itself.
3. Reboot.
Click to expand...
Click to collapse
For IR Samples (Impulse Response)
1.Download it and extract to sdcard/Vi4PERAndroid/kernel (if folder does not there,jump to step 2 and then step 1)
2.Open Vi4PERAndroid,check box "impulse response"
3.Select desire samples
Changed Driver List (Corrected 20/May)
For Galaxy S Advance,Choose Cortex A9/15 with NEON
NEW FX 2208+
ZTE U880 or same CPU(PXA920), choose "Without VFP (PXA920)" (Convolver and Surround+ disabled)
Tegra2, ARM or any CPU with freq equal/less than 800MHz, choose "With VFP"
All Qualcomm/Snapdragon of freq higher than 800MHz, regardless of cores, choose "CortexA8 with NEON"
All other Dual-core,Quad-core,Octa-core, choose "CortexA9/15 with NEON"
NEW XHIFI 2101+
ZTE U880 or same CPU(PXA920), choose "Without VFP (PXA920)"
Tegra2, ARM, choose "With VFP"
ALL others, choose "CortexAx with NEON"
Click to expand...
Click to collapse
★★★For those having problems with effects in compatible mode even after rebooting. Try this:
1.Open up /system/build.prop (If you can't find this line, you have to solve in other way)
2.Change the line Ipa.decode=true to lpa.decode=false
Trouble Shooting
When V4A is not working for you. (Really No effect for all options, NOT BY CHECKING driver status)
0. MAKE SURE YOU HAVE CHOSE THE CORRECT DRIVER. Refer OP.
1. MAKE SURE YOU HAVE BUSYBOX INSTALLED
2. Uninstall, reboot. Reinstall, Choose correct driver, reboot.
3. Don't use compatible mode yet, go to sound settings>music effects> and choose v4a(either fx or xhifi). Test.
4. If not working, switch to compatible mode, reboot, go to sound settings>music effects> and select previous effect. Test.
5. If not working, activate safe mode, reboot. Test.
Click to expand...
Click to collapse
CREDIT
ViPER520(creator) and zhuhang
FX & XHiFi Settings Explained & Recommended Value
FX Settings
V4A FX version mainly for rendering audio effects, by controlling various parameters to achieve the purpose of audio effect adjustment.
<Headset>
1. Master Power. This option defines whether to enable V4A headset sound effects, also known as main switch.
2. Playback Gain Control :
It is mainly used to dynamically control the audio volume, to amplify or to attenuate.
(1) Enable checkbox : Whether the effect is enabled.
(2) Select Effect Strength : Effect Strength is the speed of amplification or attenuation, the stronger the faster the speed and the higher the final volume, the weaker the slower the speed, the closer to the original volume. Recommended medium.
(3) Max Gain : When the volume of the note is too small, in order to uplevel the sound, there may be very large magnification. The higher the value, the louder the volume. But too large will also amplify the noise within the song. Recommended 4 times.
(4) Max Output : This value defines the maximum volume of the PlaybackAGC sound in decibel value, the greater the value the greater the volume, 0 db is the maximum. In order to make the sound softer recommended -1.9 dB.
3. FIR Equalizer
511-order 10 bands FIR linear equalizer.
(1) Enable checkbox : Whether the effect is enabled.
(2) Select Preset : Here you can select default equalizer presets. When choosing custom, it will follow the user-defined lines drawn.
(3) Linear Equalizer graphic : Will pop up when you touch the graphic equalizer, you can manually adjust the levels of amplification and attenuation of the 10 bands.
4. Convolver
When an impulse response(IR) sample is loaded, music will show the same characteristics of the loaded sample, for example equalizer, surround, reverberation, tube etc.
Make sure SD Card has /ViPER4Android/Kernel/ folder, IR samples will be located there. If folder not exists, you can download latest V4A FX and extract SDCard_V4A.zip.
(1) Enable checkbox : Whether the effect is enabled.
(2) Impulse Response : Here you can select and load IR Samples inside /ViPER4Android/Kernel/ folder.
5. Field Surround
It is mainly used to create sound field surround effects. The sound field can be understood as mono field or stereo field.
(1) Enable checkbox : Whether the effect is enabled.
(2) Select Field Surround Strength : This value defines the strength of the field surround effects. The stronger, the stereo effect will be more obvious, the sound will come from left and right sides. Recommended medium.
(3) Select Mid Image Strength :This value defines the central vocal intensity. More strongman sound more clear, the weaker the more ethereal sound.
6. Reverberation
It uses mathematical methods to simulate the environmental feeling sensation. Example a song can be felt playing inside the auditorium, living room, bathroom, and so on.
(1) Enable checkbox : Whether the effect is enabled.
(2) Room Size : This value defines the virtual environment area size. The larger the value, the sound is wider and more echoes.
(3) Sound Field : This value defines the width of the room above, in meters. Assumed that the above room size is 100 square meters, here to set a width of 14 meters, then the length of the room will be 7.14 m.
Therefore, the room size and width defines the aspect ratio of the virtual environment.
The larger the value, the sound coming from both sides will felt more obvious.
(4) Damping Factor : This value defines the humidity of air in the above virtual environment, the moisture vapor in the air will easily absorb the echoes.
So the bigger this value, the less echoes heard.
(5) Wet Signal : This value defines the volume of the simulated environment effect.
(6) Dry Signal : This value defines the volume of the original sound.
For environments with low air humidity such as living room, auditorium and other indoor environment, you can use room size and sound field to define the area of the virtual environment, water vapor content values from 0 to 20, the reverb signal values 20 to 50, the proportion of the original signal to take value of about 50.
For environments with high air humidity such as bathroom and other indoor environment that contains a lot of moisture, you can use room size and sound field to define the area of the virtual environment, water vapor content values of 50 to 100, the reverb signal values 40 to 80, the proportion of the original signal value of about 50.
7. Dynamic System
It handles the dynamic range of the sound. In other words the bass, treble, and limiting.
(1) Enable checkbox : Whether the effect is enabled.
(2) Select Listening Device : This value defines the headset type connected to the audio jack. If you cannot get the right device for good bass tone, then select Common earphone. Common earphone is a common choice. Recommend Common earphone.
(3) Select Dynamic Bass : This value defines the average dynamic bass, the greater the stronger bass. Recommend 33%.
(4) Tube Simulator(6N1J) :This option defines whether to enable tube simulator effect. V4A tube simulator uses a simplified mathematical simulation of tube effect.
If turned on, will greatly reduce high-frequency odd harmonic distortions, while increases even-order harmonic distortions of tube simulator.
8. Master Gate(Limiter)
This option is V4A output limiter, its used to prevent overloud clipping distortion.
(1) Ouput Gain : This value defines the main output volume. Its something like a volume control.
(2) Limit Threshold : This value defines the limits of waveform amplitude by the limitor, 0 dB is the maximum value.
The smaller the value, the easier to experience audio frequency compression(the smaller the volume), will lose sound details, but can effectively control the final output volume. Recommend 0 db.
<Phone Speaker>
1. Master Power : This option defines whether to enable V4A speaker sound effects, also known as main switch
2. FIR Equalizer : Same as headset equalizer.
3. Convolver : Same as headset convolver.
4. Reverberation : Same as headset reverberation
5. Extra Loud
eXtra-Loud further amplifies the sound, but is controlled to protect the speaker, will not overload.
(1) Enable checkbox : Whether the effect is enabled.
(2) Select Effect Strength : Effect Strength is the speed of amplification or attenuation, the stronger the faster the speed and the higher the final volume, the weaker the slower the speed, the closer to the original volume. Recommended medium.
(3) Max Gain : When the volume of the note is too small, in order to uplevel the sound, there may be very large magnification. The higher the value, the louder the volume. Recommend infinity.
(4) Max Output : This value defines the maximum volume of the EL sound in decibel value, the greater the value the greater the volume, 0 db is the maximum. Recommend 0db.
6. Master Gate(Limiter)
Same as headset limiter.
XHiFi Settings
V4A XHiFi version mainly for restoring audio quality and details.
1. Master Power
This option defines whether to enable V4A headset/bluetooth sound effects, also known as main switch.
2. Playback Gain Control : Same as FX version's PlaybackAGC.
3. FIR Equalizer : 2047-order 10 bands, quality much better than FX version. Method of adjusting same as FX version.
4. Audio Reconstruction
It is XHiFi's core feature, it does the detailing and treble restoring for lossy mp3 audio files. (Currently in adjustment phase, different device may have different experience.)
(1) Enable checkbox : Whether the effect is enabled.
(2) Hi Clarity : This value defines the detailing and treble restoration percentage, the larger the value, the more details of the sound and stronger treble.
For low-end/common earphones, this is not recommended as you may experience high frequency shrills.
For better earphones such as Monster,Philips,Zombie,Sennheiser, recommended value = 30 ~ 50.
For high-end headphones, value depands on headphone cable length. Start with value = 40, value +10 for every 80cm cable length.
For preamp/amp connect to phone. Start with value = 60, value +10 for every 80cm cable length.
For tube amplifier, directly use value = 100.
(3) Lo Contour : The value defines the percentage of bass contour reconstruction over total band. The larger the value, the stronger the bass, but midrange and details will slightly lost.
For earphones recommend value = 50 ~ 70.
For headphones recommend value = 20 ~ 30.
5. Master Gate(Limiter)
This option is V4A output limiter, its used to prevent overloud clipping distortion.
(1) Ouput Gain : This value defines the main output volume. Its something like a volume control.
(2) Limit Threshold : This value defines the limits of waveform amplitude by the limitor, 0 dB is the maximum value.
The smaller the value, the easier to experience audio frequency compression(the smaller the volume), will lose sound details, but can effectively control the final output volume. Recommend 0 db.
Recommended FX Settings (will differ with official post)
<Headset>
1. Master Power: ✔
2. Playback Gain Control
(1) Enable checkbox: ✔
(2) Select Effect Strength: Slight//Moderate
(3) Max Gain: 4x//8x
(4) Max Output: -1.9dB
3. FIR Equalizer
(1) Enable checkbox: ✔
(2) Select Preset: Acoustic
4. Convolver
(1) Enable checkbox: ✔
(2) Impulse Response: PopEQ // DBX 160SL Blue - Medium Ratio // JoeMeek SC2 Impulse
5. Field Surround
(1) Enable checkbox: ✘
(2) Select Field Surround Strength: Extreme
(3) Select Mid Image Strength: Extreme
6.Headphone Surround +
(1) VHS+ : ✘
(2) Select Effect Quality: Normal
7. Reverberation
(1) Enable checkbox: ✘
(2) Room Size: 25m2
(3) Sound Field: 5m
(4) Damping Factor: 0 Percent
(5) Wet Signal: 0 Percent
(6) Dry Signal: 50 Percent
8. Dynamic System
(1) Enable checkbox: ✔
(2) Select Listening Device: Common Earphone(v2)
(3) Select Dynamic Bass: 30 Percent
(4) Tube Simulator(6N1J): ✘
9.Auditory System Protection
(1) Cure Tech+ : ✔
(2) Select Binaural Level : Slight
10. Master Gate(Limiter)
(1) Ouput Gain: 0dB
(2) Limit Threshold: 0dB
<Phone Speaker>
1. Master Power: ✔
2. FIR Equalizer
(1) Enable checkbox: ✔
(2) Select Preset: Acoustic
3. Convolver
(1) Enable checkbox: ✔
(2) Impulse Response: Studer +1dB Updated
4. Reverberation
(1) Enable checkbox: ✘
(2) Room Size: 25m2
(3) Sound Field: 5m
(4) Damping Factor: 0 Percent
(5) Wet Signal: 0 Percent
(6) Dry Signal: 50 Percent
5. Extra Loud
(1) Enable checkbox: ✔
(2) Select Effect Strength: Slight
(3) Max Gain: 4x
(4) Max Output: 0dB
6. Master Gate(Limiter)
(1) Output Gain: 0dB
(2) Limit Threshold: 0dB
Recommended XHIFI Settings
1. Master Power: ✔
2. Playback Gain Control
(1) Enable checkbox: ✔
(2) Select Effect Strength: Slight
(3) Max Gain: 4x
(4) Max Output: -1.9dB
3. FIR Equalizer
(1) Enable checkbox: ✘
(2) Select Preset: Acoustic
4. Audio Reconstruction
(1) Enable checkbox: ✔
(2) Hi Clarity: 80
(3) Lo Contour: 70
5. Master Gate(Limiter)
(1) Output Gain: 0dB
(2) Limit Threshold: 0dB
Click to expand...
Click to collapse
Development Progress (Updated 5-Jun-2013)
FX version: v2.2.0.9 (Estimated date: )
1. Optimise Surround Engine+ for VFP CPUs.
XHiFi version: v2.1.0.3 (Estimated date: )
-
TODO List:
1. ViPER4Android driver auto install/update [Done]
2. Increase compatibility for Android 4.x [Done]
3. EQ user-defined slot [Deprecated, use Sound Effect Profile]
4. Sound Effect Profile [Done]
5. XHiFi support Tegra2 [Done]
6. Convolver support ARMv5TE CPU [Done]
7. Improve Convolver process [Done]
8. Convolver support IR Sample of any length [Done]
9. FX Field Surround Upgraded [Done]
10. FX Virtual Headphone Technology added [Done]
11. Fix the sound delay caused by convolver. [Done]
12. Import IR samples from external storage. [WIP]
13. Optimize audio reconstruction module. [Done]
14. Upgrade the bass effect of audio reconstruction module. [Done]
15. Use RootTools to install driver. [Done]
16. Cure Tech+[Done]
17. Add Natural Bass to FX [WIP]
18. Add clarity settings [WIP]
19. Combine FX and XHIFI [WIP]
20. Add Effect Calibration to suit one's ear [WIP]
Effect Calibration:
Every human's auditory systems are not the same, some people experience Left-Right asymmetries, while some with high-frequency phobia. Each individual has a different concept of the sound field. Therefore "Hearing Calibration" was introduced.
Through a simple calibration wizard, V4A system benchmark will be adjusted according to the calibrating result. "Hearing Calibration" feature will make sure every V4A user experience its ultimate effects up to par.
Of course, due to huge "Hearing Calibration" variety, its impossible to cook all the features at once, allow ViPER520 to experiment slowly, as the first edition could only achieve Left-Right symmetric and high frequency calibration.
Click to expand...
Click to collapse
V4A FX GUI Design (Not ready)
thanks:good:
What improvements make this more precise?
Is this better than AC!D Sound Engine?
Sent from my phone, because I'm away from my PC right now
Sami Kabir said:
Is this better than AC!D Sound Engine?
Sent from my phone, because I'm away from my PC right now
Click to expand...
Click to collapse
I've tried both and AC!D sounds better for me.
Sami Kabir said:
Is this better than AC!D Sound Engine?
Sent from my phone, because I'm away from my PC right now
Click to expand...
Click to collapse
For me "YES". I tried almost all song engines such as Acid,DSP,Awesome Beat,Pure Audio& this.I love this more.
Try using different convolvers
I'm sorry for such silly question
But what is IRSamples?
Do i need them?
fongandy said:
I'm sorry for such silly question
But what is IRSamples?
Do i need them?
Click to expand...
Click to collapse
It is Impulse Response.It is optional
1.Download it and extract to sdcard/Vi4PERAndroid/kernel (if folder does not there,jump to step 2 and then step 1)
2.Open Vi4PERAndroid,check box "impulse response"
3.Select desire samples
hermeshhn said:
thanks:good:
Click to expand...
Click to collapse
Please press "THANKS":smile:
Grady22 said:
What improvements make this more precise?
Click to expand...
Click to collapse
OP updated for detail
More IR Samples added:good:
Yeah ! I'm using this mod really cool ! Best working with Google Play Music.. choose setting -> equlizer to viper4android
edit -> I faced some problem with that I think this help to others.
When Activate Mod Sound not wotking with poweramp and some apps (Headset also). for get sound back need to disable Viper4android .
quality sound but need more fixes i think.
Yes,that's right dude
Rom : Umbrella Corporation V2
Kernel : CoCoE 6.2
4cylturbo scripts + CrossBreeder
imcoolsj said:
Yeah ! I'm using this mod really cool ! Best working with Google Play Music.. choose setting -> equlizer to viper4android
edit -> I faced some problem with that I think this help to others.
When Activate Mod Sound not wotking with poweramp and some apps (Headset also). for get sound back need to disable Viper4android .
quality sound but need more fixes i think.
Click to expand...
Click to collapse
To use Viper4android with Poweramp, you must :
- go to settings (of Poweramp)
- go to Audio Engine
- go to Advanced Tweaks
- uncheck "Direct Volume Control"
Envoyé depuis mon GT-I9070 avec Tapatalk
Letin69 said:
To use Viper4android with Poweramp, you must :
- go to settings (of Poweramp)
- go to Audio Engine
- go to Advanced Tweaks
- uncheck "Direct Volume Control"
Envoyé depuis mon GT-I9070 avec Tapatalk
Click to expand...
Click to collapse
yep but i also got ringing problem aswell
Edit - ok working nicely no problem.. I dont know wht happen
imcoolsj said:
yep but i also got ringing problem aswell
Click to expand...
Click to collapse
I never get any problems since the 1st time i used.
WOW! View count nearly 1,000 in my first post. Thank you all
anyone using jetaudio try this out yet?
FX Version 2.2.0.9 update :laugh:
What audio driver un first start i need install ?
Enviado desde mi GT-I9070 usando Tapatalk 4 Beta
[SHARE][PREMIUM SOUND] Noozxoide EIZO-rewire™ PRO (2.0.1.18) & E (1.0.0.12) - Noozy l
http://i.imgur.com/WFVtWdA.jpg
Get the most from your Core Dous sound!!
https://play.google.com/store/apps/details?id=com.noozxoidelabs.eizo.rewirepro
https://play.google.com/store/apps/details?id=com.noozxoidelabs.eizo.rewirep
https://play.google.com/store/apps/details?id=com.dogsbark.noozy
copyright(c)dogsbark.net
https://www.paypal.com/my/cgi-bin/w...63663d3faee8d5348ead9d61c709ee8c979deef3ea735
CLICK HERE TO DONATE TO THE DEVELOPER....
This also work perfectly with ALL ANDROID PHONE AS WELL.
You wouldn't believe your ear,this is pure AUDIOPHILE EARGASM!!
Install this (just updated) and follow this modelling:
>>Go to Settings > Sound > Music Effect > Noozxoide EIZO-rewire™ PRO/E > OK.
>>Open Noozxoide EIZO-rewire™ PRO/E and configure it according to guide below.
ATTENTION: Please don't flash your phone with any audio mods before using this, it's not necessary, just install this one and forget the other audio mods. This apk already include every sound libs needed. If you install/flash any other sound mods, the sound will be terrible!
------------------------------------------------------------------------------------------------------------------------------------
DESCRIPTION of PRO Series
A professional audio modeling processor allows you to reproduce surround sound and high-quality content on movies, music or games. Creates non-channeling virtual surround sound from any audio source, including stereo and mono.
Noozxoide EIZO-rewire™ PRO takes stereo/mono content and uses a virtualizer to create place phantom speakers around the headphone/room, providing a realistic and enjoyable virtual surround sound experience. This equipment is carefully tweaked under "Noozxoide Workbench", the audio research and design laboratory up to 1/24 octave high precision instruments.
Sound images dialog or vocal is tad narrowed, designed to sounds soft in the other words, less aggressive. When master volume is leveling up also increase the aggressiveness dramatically and you got an expensive audio on-the-Go.
This is the latest release with EIZO-SYNC compatible with the future EIZO VSP supports ICS/JB. We deliver you the new [FOCUS] room size, a close-range firing virtual surround sound experience. Sound images are coming from everywhere at a close distance is about 1 meter velocity, makes your contents more exciting and fastpace...Every bit is amazing.
※PLEASE USE PROFESSIONAL HEADPHONE OR PRACTICAL SPEAKERS TO EXPERIENCE IT. RECOMMENDED TO USE HEADPHONE AMPLIFIER. KEEPS AWAY MULTIPLE FILTERS, DO NOT USE 3RD PARTY FILTERS WHICH WILL CAUSED DISTORTION AND MISUNDERSTOOD THE TECHNOLOGIES※
▼ SETUP AS DEFAULT FILTER
-----------------------------------------------------------------------------------------
Settings > Sound > Music Effects > Choose “Noozxoide EIZO-rewire™ PRO Series”
▼ ADVANCED MODELING for MUSIC
-----------------------------------------------------------------------------------------
TURN ON Noozxoide Balanced X-EQ™, Choose “UNIQUE III” from Digital Presets.
TURN ON Noozxoide LogicSurround ES™, set your VSUR room size “Focus/Studio”.
▼ ADVANCED MODELING for MOVIE/GAME
-----------------------------------------------------------------------------------------
TURN ON Noozxoide Psychoacoustic™ II, set the effect strength “Large”.
TURN ON Noozxoide Balanced X-EQ™, Choose “Cinema/Game” from Digital Presets.
TURN ON Noozxoide LogicSurround ES™, set your VSUR room size “Focus/LIVE I/II”.
CHANGELOG
++ Slight UI adjustments.
++ New HD UIs, EIZO-SYNC 1.2 for noozy DFX Switcher.
-- Added VE-Engine, compensate response at -8db to 0db.
-- Added native platform lib “noozxoide_WN_HDMI-a.pmo” HDMI-audio.
-- Handles MKV ultra-high res sampling data streams.
-- Added more (VSUR), (PSYC) effect levels.
-- 100% (zero artifact) Virtualizer (Noozxoide LogicSurround™ ES)
-- Added EIZO-SYNC works with upcoming N Series VSP.
-- 1 octave bassline (Noozxoide MaxxBass™)
------------------------------------------------------------------------------------------------------------------------------------
DESCRIPTION of E Series
A VSP virtual-sound-processor delivers elemental premium sound, whether you are playing favorite (games, watching movie) or listening various genres of musics. The experience allows you to configure more than 4 sound elements (Deep, Warm, Bright, Clear) on your headphones or practical speakers with immersive VSUR, or set it to aggressive and powerful sound on your content...
This time we blended it with a powerful and sophisticated True Voice processor (Noozxoide NogicQ™), is an Q-free true voice processor. It allows you to change sound profiles for your headphone and typically music enthusiast has one or more headphones for listening differ musics. E Series has slightly less Limiter response compare to PRO Series which allows more aggressive sound.
Overall, delivers higher definition True Voice results audible signals with low latency, low noise, extremely low harmonics, tumble-crystal-clear high signal, unique-ty drive out high-driver equipment, pump-in 16k 16Bit/24Bit sampler beating result.
This is a full processor-based modeling series without any parametric filter. Be ready for the natural sound on your music, create heart-pumping. Every bit is amazing...
※PLEASE USE PROFESSIONAL HEADPHONE OR PRACTICAL SPEAKERS TO EXPERIENCE IT. RECOMMENDED TO USE HEADPHONE AMPLIFIER. KEEPS AWAY MULTIPLE FILTERS, DO NOT USE 3RD PARTY FILTERS WHICH WILL CAUSED DISTORTION AND MISUNDERSTOOD THE TECHNOLOGIES※
▼ SETUP AS DEFAULT FILTER
-----------------------------------------------------------------------------------------
Settings > Sound > Music Effects > Choose “Noozxoide EIZO-rewire™ E Series”
▼ ADVANCED MODELING for MUSIC
-----------------------------------------------------------------------------------------
TURN ON Noozxoide NogicQ™, Choose a "Digital Elements" according to your taste..
TURN ON Noozxoide LogicSurround ES™, set your VSUR room size “Focus/Studio”.
CHANGELOG
++ Fix incorrect typos.
++ New HD UIs, EIZO-SYNC 1.2 for noozy DFX Switcher.
-- Fixed forced close on DSP networks (1.0.0.8).
-- Added native platform lib "noozxoide_NogicQ.pmo" an elemental FX.
-- Added native platform lib "noozxoide_WN_HDMI-a.pmo" HDMI-audio.
-- 1.8 octave bassline (Noozxoide MaxxBass™)
------------------------------------------------------------------------------------------------------------------------------------
@All: The entire credit of this superb sound mod goes to the real developer......I am simply sharing the great thing from the Note 2 Forum...
A special thanks to @Crescendo Xenomorph for sharing this awesome thing on xda....
Pro one...
http://forum.xda-developers.com/attachment.php?attachmentid=2347338&d=1382626735
Simple one ...
http://forum.xda-developers.com/attachment.php?attachmentid=2347339&d=1382626735
Always press the THANKS button if helped...
Some awesome Ss....
Dont forget to Press THANKS if helped....
Sent from my Fast and Super Powerful Note 2.... 》《
Hey has anyone gotten UHQ to work on bluetooth? I just got in the update and it enables when I plug my headphones into the phone but not when connected via BT. Thanks
Sent from my SM-G920V using XDA Free mobile app
whatnow275 said:
Hey has anyone gotten UHQ to work on bluetooth? I just got in the update and it enables when I plug my headphones into the phone but not when connected via BT. Thanks
Sent from my SM-G920V using XDA Free mobile app
Click to expand...
Click to collapse
Not entirely sure if BT can support the bitrate requirement for UHQ. BT isn't really a data heavy protocol.
Sent from my iPhone using Tapatalk
LNJ said:
Not entirely sure if BT can support the bitrate requirement for UHQ. BT isn't really a data heavy protocol.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Okay thanks. Yeah I know BT isnt great for HQ but I guess I was under the impression that the tweaks would work on either.
Sent from my SM-G920V using XDA Free mobile app
whatnow275 said:
Okay thanks. Yeah I know BT isnt great for HQ but I guess I was under the impression that the tweaks would work on either.
Sent from my SM-G920V using XDA Free mobile app
Click to expand...
Click to collapse
To use UHQ on bluetooth connectivity, you must have a compatible Bluetooth Headphone. Check out Samsung Level On Wireless Pro.
Samsung Level on Pro with S7 EDGE
I am currently listening to 24\192 tracks on my S7 edge with PowerAMP alpha and a bluetooth attached Level on Pro. I had my doubts when I read the specs but it is extremely likely that it works for this combination of hardware and software . UHQ via Bluetooth does work.
Galaxy S6 (S6 Edge, Edge+) and S7 (S7 Edge) support UHQ-BT codec developed by Samsung (don't mix with Samsung UHQ upscaler used in stock Music application). This codec allows audio transmittion via Bluetooth 4.0 at a pretty high resulution: 24 bit / 96 kHz (2 channels stereo). In order to be able to use this feature you must use Bluetooth audio device, which supports this codec, for example, headphones Samsung Level series. In order to enable UHQ-BT you need to download the application Samsung Level from Google Play Market and make sure that "UHQ" is enabled. 24 / 96 is the TOP possible limit of UHQ-BT codec for a pair S7 (S7E) + Level headphones. Of course it also depends on the audio file (stream) you're trying to play. If the file itself has low audio resolution with high compression then you cannot get high audio quality. The best audio quality will be when listening to audio files in lossless format (such as flac) with resolution 24 bit / 96 kHz. But there's also a question of how such high resolution was created. One thing is it was made from the original studio recording (made in 24, 36 or 48 bit resolution on professional equipment). And the other thing is if the source for lossless 24/96 audio file was a crappy mp3. A special case would be some vinyl-rip made by an enthusiast on some high-end analog - digital pair. You can find them with resolution as high as 24/192. But most of the time you get some background noise and vinyl crackle. So, the point of such high resolution for vinyl rips in the first place is rather doubtful in my opinion... Also, since UHQ-BT top capability is 24/96 audio resolution, there's no point in using 24/192 for our pair (S7 + Level headphones) UHQ-BT will downscale it to its 24/96 anyway... Other high-res BT codecs available: aptX HD, developed by Qualcomm, which supports HD audio with resolution 24/44, which is a little lower than UHQ-BT. Standard aptX supports CD-audio with resolution up to 16/44, which is even lower. Samsung Galaxy S6 (S6E) and S7 (S7E) support aptX, but do not support aptX HD. If you have a BT audio devise, which supports aptX and are unwilling to get Samsung Level series headphones (Level U, Level U Pro, Level U Pro ANC, Level On, etc...) then aptX supported quality with 16/44 resolution is the highest possible that you'll get. And if your headphones do not support aptX then you will get even lower resolution. The bottomline is get Samsung Level series headphones, if you want to get the highest BT wireless audio quality.
Now, as far as Samsung UHQ upscaler, which is built-in in the Samsung stock Music application, this is a feature, which increases audio resolution programmably. This helps to get the audio sound a little "more smooth" compared with original low-res quality. It removes to certain extent the "digitalness" of the sound, "making connection" between sound "dots" smoother. But it cannot make up high frequency sounds between dots, which may be lost due to low resolution and/or high compression. It simply "doesn't know" they existed.
Hey guys. I swear when I say this that I had a S6 for 2 years and the old samsung music app allowed to enable the UHQ mode even when connected to standard Bluetooth headphones and scrappy speakers started aounding great. In fact I was just surprised at how much of a difference it made. But I updated the app and since then have never gotten it to work over Bluetooth. It still works for wired headphones. But honest to good this feature actually worked and made no difference to which speaker it was connected to.
So I am pretty sure there must be a way to get it to work it is definitely a software matter. I am sure some of you smart folks can figure it out.
What if?
skg27 said:
Galaxy S6 (S6 Edge, Edge+) and S7 (S7 Edge) support UHQ-BT codec developed by Samsung (don't mix with Samsung UHQ upscaler used in stock Music application). This codec allows audio transmittion via Bluetooth 4.0 at a pretty high resulution: 24 bit / 96 kHz (2 channels stereo). In order to be able to use this feature you must use Bluetooth audio device, which supports this codec, for example, headphones Samsung Level series. In order to enable UHQ-BT you need to download the application Samsung Level from Google Play Market and make sure that "UHQ" is enabled. 24 / 96 is the TOP possible limit of UHQ-BT codec for a pair S7 (S7E) + Level headphones. Of course it also depends on the audio file (stream) you're trying to play. If the file itself has low audio resolution with high compression then you cannot get high audio quality. The best audio quality will be when listening to audio files in lossless format (such as flac) with resolution 24 bit / 96 kHz. But there's also a question of how such high resolution was created. One thing is it was made from the original studio recording (made in 24, 36 or 48 bit resolution on professional equipment). And the other thing is if the source for lossless 24/96 audio file was a crappy mp3. A special case would be some vinyl-rip made by an enthusiast on some high-end analog - digital pair. You can find them with resolution as high as 24/192. But most of the time you get some background noise and vinyl crackle. So, the point of such high resolution for vinyl rips in the first place is rather doubtful in my opinion... Also, since UHQ-BT top capability is 24/96 audio resolution, there's no point in using 24/192 for our pair (S7 + Level headphones) UHQ-BT will downscale it to its 24/96 anyway... Other high-res BT codecs available: aptX HD, developed by Qualcomm, which supports HD audio with resolution 24/44, which is a little lower than UHQ-BT. Standard aptX supports CD-audio with resolution up to 16/44, which is even lower. Samsung Galaxy S6 (S6E) and S7 (S7E) support aptX, but do not support aptX HD. If you have a BT audio devise, which supports aptX and are unwilling to get Samsung Level series headphones (Level U, Level U Pro, Level U Pro ANC, Level On, etc...) then aptX supported quality with 16/44 resolution is the highest possible that you'll get. And if your headphones do not support aptX then you will get even lower resolution. The bottomline is get Samsung Level series headphones, if you want to get the highest BT wireless audio quality.
Now, as far as Samsung UHQ upscaler, which is built-in in the Samsung stock Music application, this is a feature, which increases audio resolution programmably. This helps to get the audio sound a little "more smooth" compared with original low-res quality. It removes to certain extent the "digitalness" of the sound, "making connection" between sound "dots" smoother. But it cannot make up high frequency sounds between dots, which may be lost due to low resolution and/or high compression. It simply "doesn't know" they existed.
Click to expand...
Click to collapse
What if I have the S7 and Samsung Level wireless headphones along with the Samsung Level App and the uhq upscaler still is not accessible?
Hi,
Samsung's own UHQA BT audio codec, such as APTx HD or LDAC, has a link bandwidth of 24/96 (512 kbps), but when I connected my Level u pro to my S7 (Exynos) and check it from the developer's menu, it connect with scalable audio codec 16/44. (256 kbps). And I can not change it. in this case 24/96 flac music quality is reduced to cd. Can someone who knows explain?
Disclaimer: Any shared files in this thread were not created by me. I do not own any of these files and i will not help you if a profiles loudness made you deaf, burned down your earphones, killed your loudspeakers or started a nuclear war.
This Thread was created for only one reason:
To share profiles and irs files for Arise Sound Systems http://forum.xda-developers.com/showthread.php?t=3379709
and for Viper4Android in general.
GENERAL RULES for sharing profiles:
- 1. Name your Profile
- 2. Write the Version of Arise you are using with the shared profiles.
(example: Arise Genesis RC 3)
- 3. Taken tweak.prop file
(example: sonophilos)
- 4. HTC Dolby Atmos Preset
(example: Harman Kardon)
- 5. Audio Effects.conf
(example: XPlay3s)
Happy Sharing[emoji16]
Here is my Zombie Series that I believe i've shared on all of guitardedhero's threads? I use on both my OnePlus X and my S3. These are mainly tweaked for speaker use as I do not use headphones. I've used these through the whole uprising of A.R.I.S.E. as well as guitardedhero's Viper packages. The one I mostly use is ZombieSin. Some also like Zombiefied.
https://drive.google.com/file/d/0By5C3rBWmML3c2NMOV9zRTFUdkU/view?usp=drivesdk
Sent from Outside the 9 using my Zombiefied Exodus OnyX
I would like to introduce my profile called Soundaholic.
It was inspired by the profiles of guitardedhero and sonophilos.
Device: Moto Maxx XT1225
Headset: JBL J-22
Bluetooth: Samsung HT-F5525WK
Software: ARISE Sound Systems
Tweak.prop: Sonophilos
Profile name: Soundaholic
Excellent balance between bass and clarity.
Tested with Hip Hop, Folk, Rock and Pop.
IMPORTANT: Lock effect mode to headset first.
BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
HS = Headset (Wired and Wireless).
SP = Speaker (Smartphone Speakers).
If you want to change volume level just adjust the Output Gain in Master Gate.
Thanks to @guitardedhero and @sonophilos for the inspiration!
Running on yureka
Headphones are stock yureka headphones.
Oct os ROM
Exodus version 0.8.5 tweak prop by sonophiles
Little bit towards soft bass.
IRS file included in zip.http://cloud.tapatalk.com/s/57460c76d1609/lenovo.zip
Sent from my AO5510 using Tapatalk
RSDamasceno said:
I would like to introduce my profile called Soundaholic, It was inspired by the profiles of guitardedhero and sonophilos (Thanks men).
Excellent balance between bass and clarity.
Moto Maxx with JBL J-22 and Samsung HT-F5525WK
Tested with Hip Hop, Folk, Rock and Pop.
Notes:
1 - Extract to Vipers folder.
2 - I suggest sonophilos tweak.prop.
3 - BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
4 - HS = Headset (Wired and Wireless).
5 - SP = Speaker (Smartphone Speakers).
6 - Lock effect mode to headset first.
7 - If you want to change volume level just adjust the Output Gain in Master Gate.
8 - Thanks to guitardedhero and sonophilos for the inspiration!
Click to expand...
Click to collapse
I have been using this since posted in the Arise thread, and I love this profile, I am actually using it with sonophilos modified tweak.prop and xplay3 preset and it sounds amazing!
1. Oneplus 3
2. V-Moda Crossfade lp²
3. Deep Bass+Clarity
4. Latest
V1: (The zip includes the profile folder and the irs file)
This profile is specifically tuned for my headphones for Deep and strong bass while maintaining the clarity in music. Recommended for house, electronic music, trance, trap, dubstep.
Disable the EQ if there is too much treble for you or your headphones although this will take away most of the clarity.
Im courious to know if this works well for other headphones too. Good luck!
Edit: Disable convoler and enable Spectrum Extension at 0.5 if you listen to rock/metal.
V2:
Best experience with Oneplus 3 official stock/beta roms. Go to settings/audio and enable audio switch, set earphone type to general and dont use any of the preset equalizers.
It will work on all devices though but I dont guarantee the optimal sound quality.
Wow
Unbelievable and thank you?
Teeth shatteringly good.
BOOM !! Mother of God that gave me an erection. It made my rooted HTC Desire 510 sound better then my stock M9.
I updated my profiles and would like to share with you...
Tested with ARISE Sound Systems Exodus 0.9.4 & tweak.prop by Sonophilos.
RSDamasceno said:
I updated my profiles and would like to share with you...
Tested with ARISE Sound Systems Exodus 0.9.4 & tweak.prop by Sonophilos.
Click to expand...
Click to collapse
I am noob. Sorry i just want to ask if i Can flash it on twrp?
Sent from my Nexus 6P using XDA-Developers mobile app
raniel24 said:
I am noob. Sorry i just want to ask if i Can flash it on twrp?
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
no, extract, then go in profiles folder and select the profile folders inside and move to Viper4Android, and paste inside profiles folder. Then open the extracted kernels folder and move all those to Viper4Android kernels folder.
Sent from Outside the 9 using my Zombiefied Exodus OnyX
raniel24 said:
I am noob. Sorry i just want to ask if i Can flash it on twrp?
Click to expand...
Click to collapse
No. Just extract the Profile zip and merge the /ViPER4Android folder into the directory where /ViPER4Android/Profile/Stock exists.
Like described here: http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Sent from my Motorola Moto MAXX using XDA Labs
Oneplus One
JBL 22
Arise Exodus 0.85 with Sonophilos tweak.prop. for Exodus 0.8.5
Elite Sound 1.0 J.E.N.O.V.A. Profile
Irs is inside the zip
(zip is not flashable!)
https://drive.google.com/file/d/0Byu7-T-ICFbMai16aEwxeHdmNkU/view?usp=drivesdk
This is Spaaartaaaaa!!!
I've updated my Soundaholic profile...
I updated my profile called Soundaholic.
It was inspired by the profiles of guitardedhero and sonophilos.
Device: Moto Maxx XT1225
Headset: JBL J-22
Bluetooth: Samsung HT-F5525WK
Software:
ARISE Sound Systems Exodus 0.8.9 (preferred)
Or
ARISE Sound Systems Exodus 0.9.6
Sounds better with respective version of sonophilos or guitardedhero build.prop
Profile name: Soundaholic
Excellent balance between bass and clarity.
Tested with Hip Hop, Folk, Rock, Metal & Pop.
IMPORTANT: Lock effect mode to headset first.
BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
HS = Headset (Wired and Wireless).
SP = Speaker (Smartphone Speakers).
If you want to change volume level just adjust the Output Gain in Master Gate.
Thanks to guitardedhero and sonophilos for the inspiration!
See notes above.
Sent from my Motorola Moto MAXX using XDA Labs
RSDamasceno said:
I've updated my Soundaholic profile...
I updated my profile called Soundaholic.
It was inspired by the profiles of guitardedhero and sonophilos.
Device: Moto Maxx XT1225
Headset: JBL J-22
Bluetooth: Samsung HT-F5525WK
Software:
ARISE Sound Systems Exodus 0.8.9 (preferred)
Or
ARISE Sound Systems Exodus 0.9.6
Sounds better with respective version of sonophilos or guitardedhero build.prop
Profile name: Soundaholic
Excellent balance between bass and clarity.
Tested with Hip Hop, Folk, Rock, Metal & Pop.
IMPORTANT: Lock effect mode to headset first.
BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
HS = Headset (Wired and Wireless).
SP = Speaker (Smartphone Speakers).
If you want to change volume level just adjust the Output Gain in Master Gate.
Thanks to guitardedhero and sonophilos for the inspiration!
Click to expand...
Click to collapse
Hello
I locked effect mode to headset and when i load the profil headset will be changed but not the speaker.
I also tried disable lock from headset but speaker would not change.
What can i do?
Sent from my Nexus 6P using XDA-Developers mobile app
xerxes1511 said:
Hello
I locked effect mode to headset and when i load the profil headset will be changed but not the speaker.
I also tried disable lock from headset but speaker would net change.
What can i do?
Click to expand...
Click to collapse
Try to select the profile twice. Some users have reported that the profile is not loaded the first time. That includes me. It is a known bug V4A.
Sent from my Motorola Moto MAXX using XDA Labs
RSDamasceno said:
Try to select the profile twice. Some users have reported that the profile is not loaded the first time. That includes me. It is a known bug V4A.
Sent from my Motorola Moto MAXX using XDA Labs
Click to expand...
Click to collapse
I tried it but only headset will be changed
This is really funny ?
Sent from my Nexus 6P using XDA-Developers mobile app
xerxes1511 said:
I tried it but only headset will be changed
This is really funny ?
Click to expand...
Click to collapse
The options available in V4A some are marked or changed like that?
Sent from my Motorola Moto MAXX using XDA Labs
RSDamasceno said:
The options available in V4A some are marked or changed like that?
Sent from my Motorola Moto MAXX using XDA Labs
Click to expand...
Click to collapse
Here are the pictures with locked Headset?
I have the same settings
Sent from my Nexus 6P using XDA-Developers mobile app