I paid a non-corporate MetroPCS store to flash 4 Sprint CDMA Hero's to MetroPCS and add the ESN's into the system, I walked out with 4 working phones.
After having the phones for a while, I was playing around with one of them as I was learning how to install ROM's and such and in the process the phone somehow got set back to its like new state.. as in original phone number, all Metro info was gone, including MMS and Internet. If I tried to place a call I got the standard Sprint "your account can not be validated" recording.
After playing around for a couple of days I can place a call to 611 (Metro CS) and it recognizes my phone and my account, however that's the only number I can call. If I try to call a regular number I get a strange recording asking me if I want to place a collect call.
I know in order to get my phone working I need the following information:
SID/NID pair I have the correct information entered into the phone
MDN/MIN pair <------ I suspect this is where my problem is.
I called Metro to get my MIN, its not the same as my phone number and its not the original phone number. I cannot figure out the correct place to enter this information.
I have tried in CDMA workshop, QPST tools and DFS CDMA tools. These programs can be very confusing with MIN's and True MIN's, the list goes on.
I have flashed my phone to and old stock Sprint 2.1 ROM (NFX) so that I could enter the programming codes and such. Link to the ROM
http://forum.xda-developers.com/showthread.php?t=849024
I am only concerned with getting voice working for now, I might be able to do the rest on my own.
Any help is greatly appreciated.
Thanks.
Edited to add that I do have a MetroPCS prl file installed.
Edit 2 to add that this cant be done. When the phone was originally flashed the guy didnt use my phones MEID for whatever reason.. therefore the phone is not in the MetroPCS system. I tried to get the info from MetroPCS but no dice.
I will not go back to the same place to get it fixed.
I bought a Tmo G2 on Swappa, the previous owner got Tmo to network unlock, so the phone is working fine on Ting, but the option to change the voicemail number is grayed out, stuck on the Tmo number +18056377456. I can call my Ting vm manually (dialing *123) but I'd like to change it so I can press & hold 1 like normal. Any suggestions? Haven't found anything on forum or google search.
Hi guys,
I recently purchased an unlocked Galaxy S6 (SM-G920R6) in the US and brought it with me to Ecuador as a gift for my dad. SIM card is "working" I can make phone calls and send SMS but when I try to call customer service or use the carrier services (USSD), I get connected to the Verizon Wireless Global Roaming hotline. Is there a way I can fix this?
I have changed the configuration to LTE/GSM (instead of global), selected the network manually, turned off roaming, etc...
Any suggestions?
Tried to contact Verizon but they claim it's not up to them.
Any input will be most welcomed!.
Thank you
Why not just add the number of the current network in the contacts? Saves you trouble of configuring. Just tell your dad to call that number instead.
So I bought the phone and a 35$ service card three days ago from Wal-Mart. Activated the phone around 3am that night. Phone hasnt worked once. No calling, texting or using data. Ive contacted ST CS numerous times with no help. Im told the same everytime. Dial *73 then turn off and back on, if that doesn't work repeat. Well it wont even let me dial * numbers. Pops up sim not registered, sim not provisioned, contact service provider. So whats what ive done. Yet they keep telling me my service and phone are active so they cant do anything. Ive seen a lot of people say to get an ATT sim and use that instead of the Verizon sim, and that will do the trick.
My phone number doesnt show up in settings. Network type doesnt. Cant edit or add or delete APN. PRL is blank in settings and no way to change it. Does anybody have any ideas or advice on what to do to fix all these issues???? I have 4 bars at all times but my service says 1x and yet i cant make calls or texts. Calls say im roaming and to buy a service card if I wanna make calls. Texts get stuck on sending then minutes later pop up they failed.
Rilynnsmamaxo said:
So I bought the phone and a 35$ service card three days ago from Wal-Mart. Activated the phone around 3am that night. Phone hasnt worked once. No calling, texting or using data. Ive contacted ST CS numerous times with no help. Im told the same everytime. Dial *73 then turn off and back on, if that doesn't work repeat. Well it wont even let me dial * numbers. Pops up sim not registered, sim not provisioned, contact service provider. So whats what ive done. Yet they keep telling me my service and phone are active so they cant do anything. Ive seen a lot of people say to get an ATT sim and use that instead of the Verizon sim, and that will do the trick.
My phone number doesnt show up in settings. Network type doesnt. Cant edit or add or delete APN. PRL is blank in settings and no way to change it. Does anybody have any ideas or advice on what to do to fix all these issues???? I have 4 bars at all times but my service says 1x and yet i cant make calls or texts. Calls say im roaming and to buy a service card if I wanna make calls. Texts get stuck on sending then minutes later pop up they failed.
Click to expand...
Click to collapse
Are you certain that you activated the device correctly and entered the SIM card number correctly when you activated the device?
Give me an accurate and descriptive breakdown of the exact steps you took when you activated the device and SIM.
BTW, AT&T SIMs are for GSM devices, not CDMA devices, if your device is a Straight Talk device, your device is a CDMA device. I doubt an AT&T SIM will help.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Are you certain that you activated the device correctly and entered the SIM card number correctly when you activated the device?
Give me an accurate and descriptive breakdown of the exact steps you took when you activated the device and SIM.
BTW, AT&T SIMs are for GSM devices, not CDMA devices, if your device is a Straight Talk device, your device is a CDMA device. I doubt an AT&T SIM will help.
Click to expand...
Click to collapse
I mean, I'm assuming I did everything right lol. I followed the steps the ST website took me thru. Phones brand new, never been activated. Brand new sim. I went to the website, chose activate, chose I have a ST phone, input my zip, input IMEI, input SIM #, input service pin, created my account, updated profile settings, restarted phone. The app says my service is active, the website says its active, ST CS says its active on their end. But I can't call or text or use data. My network type is 1xRTT. I have 4-5 bars at all times. When I try to call regular numbers, I get a "you are roaming, to place calls please purchase a service card" or something along those lines. When I try to call *73 like ST keeps telling me, it says sim not registered, sim not provisioned, contact service provider.
My phone is broken and all I have is this Boost Mobile LG G Stylo (LS770). I poured through the logs from ADB and eventually got the MSL. I know it works because it lets me access menus now that previously prompted me for a code. Problem is when I put another carriers SIM in it it just says 'Invalid SIM'. I can't figure out for the life of me where to enter the MSL for carrier unlocking. Everything I've read says you need the MSL for unlocking. I was messing around with this Kyocera Kona flip-phone and I got the MSL for that too, but with that phone you can do ##THEMSLCODE# and it will let you edit MDN / MSID. Both the Kyocera and the LG are locked to Boost Mobile and I don't have Boost Mobile anymore. If anyone could point me in the right direction of what carrier unlocking consists of I'd be really appreciative. I am not 100% clear on exactly how mobile networks authenticate or how you tell them to try to communicate with one carrier's network over another.
Any help would be awesome because if I can't get either of these to work in the next week or so I am going to lose my service.
Also, what exactly does DIAG mode do?