Hello everybody, i'm new to this stuff and after reading the forum i finally decidede to install WM 5.0 to my Blue Angle. Everything went great. I even installed some nice software from SPB.
My Questions are:
1) If i try to syncronize my pocket pc with my pc(Win 7 x64, asus p5q deluxe, e8500) i get an erro and nothing happens. On my laptop running the same OS everything went good. I can syncronize and work like it si suppoused to be. What is the problem on the PC?
2) If i listen to some mp3's, dealing with the problem of wich i put as my ringtone, the sound stops. No more mp3 listening, no more ringin. I need to soft reset and then if i don't try to listen to the mp3's everything works well. Why this problem.
3) The wireless is a big problem. I can't connect my wireless at home(need to specify mac at rooter admin-page and need to write IP and DNS to phone, I've done all that). I can't connect to a wireless wich has WPA, WEP. If it's free i can connect.
Pre-Thanks to everybody.
you may want to take it to a newer version of wm. Check out the BA forums for more up to date info and answers to all your questions. As far as windows 7, you need a modded driver which you will find there as well.
Hello again. I flashed the phone with the WM6.5 rom from sun_dream. Everything works great. I can sync on my laptop on the pc at work with XP but still on my desktop at home i can't. I have don the procedure that was writen by chef in one post and still nu luck.
Any help or ideas?
ps: tHIS ERROR I GET ON THE DEVICE : "to synchronize this device you must install Activesync 4.5 or newer on your desktop computer" I have WMDC installed.
I resolved the problem. I reinstalled the windows and now it works perfectly. Thanks for your help.
shebu18 said:
I resolved the problem. I reinstalled the windows and now it works perfectly. Thanks for your help.
Click to expand...
Click to collapse
Glad you got it sorted
Any ideas on how to get HTC sync to recognize this phone? I hope somebody hasn't already posted about this--I searched to no avail.
I couldn't get it to work on my Wildfire S either. Tried enable USB debugging, run as admin, run in compatibility mode for differrent OS (I'm running Win 7 64 bit). Read somewhere that it might be a firewall issue and only worked when internet connection disabled, but that didn't work either. Any other ideas?
I have windows 8 installed on my pc, everything works except tf300. I just can't connect it to my pc. When I access control panel -> hardware -> device, win 8 does detect the hardware, however there is an exclamation mark showing, saying that the MTP driver is missing.
I have installed asus sync but it doesn't help. also did a little research:
http://www.transformerforums.com/fo...8-frustration-transferring-files-tf300-2.html
disabled disable digitally signed driver enforcement as well, however nothing seem work.
can someone please post a MTP driver? or if you know how it can be fixed, please tell me so.
thanks
redjersey said:
I have windows 8 installed on my pc, everything works except tf300. I just can't connect it to my pc. When I access control panel -> hardware -> device, win 8 does detect the hardware, however there is an exclamation mark showing, saying that the MTP driver is missing.
I have installed asus sync but it doesn't help. also did a little research:
http://www.transformerforums.com/fo...8-frustration-transferring-files-tf300-2.html
disabled disable digitally signed driver enforcement as well, however nothing seem work.
can someone please post a MTP driver? or if you know how it can be fixed, please tell me so.
thanks
Click to expand...
Click to collapse
Wish I knew what you needed. Mine works fine on windows8 64 bit pro
Sent from magical jelly bean.
Hi.
I have this tablet and after a restore the touch driver doesnt work, its like its out of sync.
In landscape mode only the left side of the screen work, and when the screen is pressed its offset by more than an inch. I have tried different drivers, but I havent found one that works.
The driver Im using is :
Provider : Silead
Date : 10/9/2014
Version : 18.53.2.188
I dont know if this is the right driver/manufacture, but its the only one I have any luck with getting any response from the screen.
Anyone has a working driver or knows which driver to use?
Thanks in advance....
/Bjonne
In the device manager its noted as ACPI\MSSL1680
Hi guys. Help greatly appreciated.
I bought a Cenovo MiniPC from Gearbest 2 months ago and from day 1 I've been getting blue screen errors. I immediately reported this to Gearbest and as you can imagine with the time difference between here (Sweden) and there (China) I was getting slow responses. Cut a long story short they 1st offered me a $20 refund from a $90 device, I accepted at the time as the errors have not appeared for over a week and thought it could be the end of it. 2 weeks after this the errors came back and it wasn't just blue screen on startup but it would freeze up during a session. I again reported this demanding for a full refund and they refused. I opened a dispute with PayPal and after a while they offered me a further $20 which I refused, they then sent me an email and said if I close the dispute they will give me a full refund. I was hesitant whether this was a scam but I went along with it and to their word I got a refund 3 days later.
After I got my refund I thought I may as well try and fix it myself now so I started in BIOS and fiddled with some switches for the emmc, one was 'secure erase', I don't know what was going through my head or what I thought the outcome would be but I enabled it and restarted. Now it just boots into BIOS and I am guessing the reason is that the emmc is now blank.
So ive now got a minipc with a blank emmc, I have loaded a bootable copy of Windows 10 setup to a usb and forced a usb boot in the bios but nothing happens.
I have opened the case to look for a emmc card I can take out and put in my laptop to reformat with an os but I couldn't find anything, there was a metal grill on one side that looks like it is hiding stuff and it is impossible to lift the grill off.
There is a tf card reader on the side so i am thinking that I can extract a Android image onto the card and boot from the card but I am not sure how and whether it will work.
Can i get some assistance in this please.
James
Hello, I've got same problem, 0xc000025 error code, arrived my tentative to upgrade the PC to Windows 10 (the PC arrived with 8.1 installed)
No way to boot my USB in the bios. Have you solved? Someone can help?
try and format the usb stick to 4k sectors before using the win10 media creator, think that's how i did it
Thank you for replying and sorry for the late response.
Have you got the same mini pc?
How do you format stick into 4k sectors? What format did you use (Fat32,NTFS...)?
fat32, in windows format dialog box its "allocation unit size" set to 4096
to boot from usb the stick has to be recognised as bootable before u can run the bios command to override boot device
yep i figured it out thanks. ive now got another problem and this is totally my fault if it cant be fixed...
in bios i unchecked the option to use integrated graphics so now when i boot i see nothing
maddogbarber said:
fat32, in windows format dialog box its "allocation unit size" set to 4096
to boot from usb the stick has to be recognised as bootable before u can run the bios command to override boot device
Click to expand...
Click to collapse
jamos316 said:
yep i figured it out thanks. ive now got another problem and this is totally my fault if it cant be fixed...
in bios i unchecked the option to use integrated graphics so now when i boot i see nothing
Click to expand...
Click to collapse
intesting, daft thing to do tho, u could try borrow a usb gfx card?
Does anybody know how to reset the bios, because I've disabled the usb ( stupid x 10000 ) and I cannot use the usb ports (mouse and keyboard)
same problem here... I've disabled xhci support and no USB right now. The problem is that removing the battery does not make the bios to default.
I've still got the issue with no picture. I need to reset the bios but not sure how. Or maybe I can connect it to my laptop and get it working from there
yo. just got myself a cenovo mini pc 2, and it runs windows 10, but it's not legit. That bothers me, so I want to run android or linux. You guys mention that it's running a BIOS, but i think perhaps the mini pc 2 is running non-BIOS/EFI, because there's no preboot screen, and USB drives don't boot up at all.
Hi !
Did anyone got a chance at installing another os ?
I have a Cenovo mini pc 2 and I had troubles with sound. I had no issue for a week or two and then (maybe windows update, who knows) the sound would switch to the speakers output instead of the hdmi one. (it was plugged on my tv) so I decided (stupidly) to uninstall the audio components with the hope that windows would redetect and reinstall them with better drivers. Well, that didn't work and now in my device manager are two unknown components which don't work and I have no sound at all. If anyone found the global drivers for the device, or could make me a screenshot of their devices panel...
In the meantime I would probably try my luck to install openelec or kodibuntu on it but I couldn't manage to boot on bios. Did anyone tried using the Advanced startup option of windows 10 ?
Driver Package Cenovo MiniPC2
nyaneko said:
Hi !
Did anyone got a chance at installing another os ?
I have a Cenovo mini pc 2 and I had troubles with sound. I had no issue for a week or two and then (maybe windows update, who knows) the sound would switch to the speakers output instead of the hdmi one. (it was plugged on my tv) so I decided (stupidly) to uninstall the audio components with the hope that windows would redetect and reinstall them with better drivers. Well, that didn't work and now in my device manager are two unknown components which don't work and I have no sound at all. If anyone found the global drivers for the device, or could make me a screenshot of their devices panel...
In the meantime I would probably try my luck to install openelec or kodibuntu on it but I couldn't manage to boot on bios. Did anyone tried using the Advanced startup option of windows 10 ?
Click to expand...
Click to collapse
I have my Cenovo MiniPC2 since 2 Days and its working without Problems. Because the first what i'am doing with ia new PC is a backup, i have a Driver Backup too
Use Driver Backup and ask me for a Link to the Driver Package because i cant post outside Links before i spamed xda with antoher 9 postings without links.... sorry.
Maybe i can post a Textlink
mega.nz/#!d8hgzYpa!vI5_giRvMQoWLrNZeIAua3dYNL1J3JFiWOHSK_PPcaE
mega.nz/#!wkJWXbyS!dvVQ4JRn3r2GWAANtQ99purCUrbsNdoWxq_fx8x8gKo
SomeoneYouNeverKnow said:
I have my Cenovo MiniPC2 since 2 Days and its working without Problems. Because the first what i'am doing with ia new PC is a backup, i have a Driver Backup too
Use Driver Backup and ask me for a Link to the Driver Package because i cant post outside Links before i spamed xda with antoher 9 postings without links.... sorry.
Maybe i can post a Textlink
mega.nz/#!d8hgzYpa!vI5_giRvMQoWLrNZeIAua3dYNL1J3JFiWOHSK_PPcaE
mega.nz/#!wkJWXbyS!dvVQ4JRn3r2GWAANtQ99purCUrbsNdoWxq_fx8x8gKo
Click to expand...
Click to collapse
I still have the problem with no graphics.
I know the problem as I disabled the onboard graphics in bios... I know **** head move.
I have tried to remove the lead leading from the bios to the motherboard in hopes it will reset it but nothing.
Is there anything I can do from USB do you think? Such as flash a new bios.
yanger said:
yo. just got myself a cenovo mini pc 2, and it runs windows 10, but it's not legit. That bothers me, so I want to run android or linux. You guys mention that it's running a BIOS, but i think perhaps the mini pc 2 is running non-BIOS/EFI, because there's no preboot screen, and USB drives don't boot up at all.
Click to expand...
Click to collapse
I have a Cenovo Mini PC 2 with 2GB/32GB. BIOS/EFI/set-up is accessed via pressing F2 after boot. Sometimes it will accept the F2 request, sometimes not. Not sure if this is an issue related to the keypress timing after boot being critical, or the unit being generally fussy (maybe selection of which of the 4 + 1 USB sockets for keyboard is critical?). Only wandered around the BIOS settings a few times but there was all manner of Android-specific options available.
Strangely, when the F2 key is accepted, a message is flashed briefly on the screen saying "Esc key pressed" or similar, as if the "Esc" key was the BIOS access key.
The NexBox T11 InsydeH20 UEFI / BIOS / set-up options are near identical to the Cenovo Mini PC 2. There is a video walkthough of the Netbox T11 Setup Utility although it does not mention the very first screen and options seen when F2 is pressed. The Cenovo Mini PC 2 very first screen titled "First Page" can be viewed at
i68.tinypic.com/35ciec7.jpg
and the subsequent video walkthrough of the T11 "Setup Utility" can viewed at
youtube.com/watch?v=WVdXbjsF5-g
nyaneko said:
Hi ! Did anyone got a chance at installing another os ?... I have a Cenovo mini pc 2... I would probably try my luck to install openelec or kodibuntu on it but I couldn't manage to boot on bios. Did anyone tried using the Advanced startup option of windows 10 ?
Click to expand...
Click to collapse
I initially had issues attempting USB boot of Macrium Reflect with my Cenovo Mini PC 2. Eventually solved by one or more amendments of changing brand of USB stick, using Rufus to generate the bootable USB stick via formatting to FAT32 with 4096 bytes cluster size, and disabling fast UEFI in settings. USB stick was inserted into the Mini PC 2 and UEFI / BIOS was accessed by pressing F2 immediately after boot. From the first setting screen, "Boot Manager" was selected and the USB device was visible and able to be highlighted to boot from.
Hi,
Can someone please share the wireless drivers for the minipc2?
I did a fresh windows 10 install and can seem to enable wifi and device manager the wireless adapter shows an yellow triangle.
I've tried with SomeoneYouNeverKnow drivers but it didn't solve this issue...
Thank you
geoair said:
Hi,
Can someone please share the wireless drivers for the minipc2?
I did a fresh windows 10 install and can seem to enable wifi and device manager the wireless adapter shows an yellow triangle.
I've tried with SomeoneYouNeverKnow drivers but it didn't solve this issue...
Thank you
Click to expand...
Click to collapse
All drivers can be found via URL below. Restore with freeware app DoubleDriver.
mediafire.com/file/aabn24xzj40jsc8/Cenovo++back+up+drivers+CherryTrail.rar
boozet.org/dd.htm
xdevi1 said:
All drivers can be found via URL below. Restore with freeware app DoubleDriver.
mediafire.com/file/aabn24xzj40jsc8/Cenovo++back+up+drivers+CherryTrail.rar
boozet.org/dd.htm
Click to expand...
Click to collapse
Thank you.
Season greetings
Graphics drivers for cenovo pc mini 1
I Had all the issues which is in this thread so i took the steps as follows it came with windows 10 dual booting android when i looked on the partitions it was a joke several all using up space i entered bios disabled secure emmc created a windows 8.1 32 bit usb boot disk using rufus selecting gpt also fat 32 16k sectors , it worked once i entered install i delete those partitions all of them until i had a single 32 gig partition which i installed a clean windows 8.1 leaving me 20 gigs after install now the problem i have like a idiot i forgot to take a note of the device id vendor etc of the display which does not even appear in the basic adaptor tree in device manager ,, i have tried several drivers but none worked the website who made this device needs a good slap, no drivers no support but a nice device with much potential and why lock the bios to 32bit? what is wrong with these people in the mean time
if anyone has the drivers for this device please share them i would be grateful and if needed i can make a guide on how to turn this little device in to a full windows computer its locked on windows 8 in the bios and most settings in the bios is locked to but i have obtained bios editor tools for this american trends i will give it a try later once i have full gpu control the rest i do not care as it will be used with bluetooth but intel hd drivers or the device if would be appreciated
Kind Regards