[Q] Tipo recovery fith flashtool - confusion! - Sony Xperia Miro, Tipo (Dual), J, E

Hi,
recently i tried to install freexperia on my (SINGLE SIM) Tipo. It took me a few hours, and I had to use flashtool to recover my phone at one point. All went swimmingly and I managed to get FreeXperia rom on my phone. After using freexperia rom for 48 hours I am frustrated with bugs other aspects of the ROM and so I now wish to revert to stock on my phone. The issue I am encountering is that FlashTool doesnt flash my stock rom to my phone anymore. Perhaps something to do with the bootloader maybe? It starts flashing but freezes at 0% and my phone's green LED turns off and it wont go any further.
I am not a noob when it comes to these things but I haven't encountered this issue before so would be glad of any help someone can give me with regards to getting stock back on my little phone?
08/042/2013 18:42:17 - INFO - Selected st21i_11.0.a.0.16_non(2).ftf
08/042/2013 18:42:17 - INFO - Preparing files for flashing
08/042/2013 18:42:17 - INFO - Please connect your device into flashmode.
08/042/2013 18:42:28 - INFO - Device connected in flash mode
08/042/2013 18:42:28 - INFO - Opening device for R/W
08/042/2013 18:42:29 - INFO - Reading device information
08/042/2013 18:42:29 - INFO - Phone ready for flashmode operations.
08/042/2013 18:42:29 - INFO - Current device : Unknown: Jun 20 2012/22:39:46 - BX9036MC6R - Unknown: Jun 20 2012/22:39:46 - Unknown: Jun 20 2012/22:39:46 - Unknown: Jun 20 2012/22:39:46
08/042/2013 18:42:29 - INFO - Start Flashing
08/042/2013 18:42:29 - INFO - Processing loader
08/042/2013 18:42:29 - INFO - Checking header
08/042/2013 18:42:29 - INFO - Flashing data
FREEZES AT 0% HERE - HAVE PREVOIUSLY LEFT THE PHONE HERE FOR OVER 1 HOUR AND IT DOESNT GET ANY FURTHER - SO I DISCONNECT THE PHONE...
08/042/2013 18:42:39 - INFO - Ending flash session
08/042/2013 18:42:39 - ERROR - Read error :31 : A device attached to the system is not functioning.
08/042/2013 18:42:39 - ERROR - Error flashing. Aborted
08/042/2013 18:42:40 - INFO - Device disconnected
Click to expand...
Click to collapse

You aren't getting header verification error, but still try replacing the loader.sin file with the file found attached to 1st post in the ftf thread.
Also in the rom if you're able to find options mtp and msc, toggle it to whatever its not, (but I think msc works) .
Also its possible the ftf file you have is broken so redownload it if none of above work.
Nothing to do with bootloader.

satan89 said:
You aren't getting header verification error, but still try replacing the loader.sin file with the file found attached to 1st post in the ftf thread.
Also in the rom if you're able to find options mtp and msc, toggle it to whatever its not, (but I think msc works) .
Also its possible the ftf file you have is broken so redownload it if none of above work.
Nothing to do with bootloader.
Click to expand...
Click to collapse
Thanks for speedy reply, it was MTP mode - changed to PTP (camera mode) and its worked first time, THANKYOU for your help! Back to tinkering for me!

need help
hello,
i'm in the same situations as OP, but when i try to flash, the flashtool says:
flashtool error in process header.
what do i do? i tried to find the msc and mtp settings, but i can't find them.
what do i do? is there any other way to put back the original firmware?
thanks.

warsp1te said:
hello,
i'm in the same situations as OP, but when i try to flash, the flashtool says:
flashtool error in process header.
what do i do? i tried to find the msc and mtp settings, but i can't find them.
what do i do? is there any other way to put back the original firmware?
thanks.
Click to expand...
Click to collapse
Go to settings>xperia> connectivity>usb mode.
There u can find mtp/msc mode.
Also enable usb debugging in ur device and connect to ur pc and check if flashtool(latest version) recognizes the device.
Then flash ur ftf.
Sent from my ST23i

satan89 said:
You aren't getting header verification error, but still try replacing the loader.sin file with the file found attached to 1st post in the ftf thread.
Also in the rom if you're able to find options mtp and msc, toggle it to whatever its not, (but I think msc works) .
Also its possible the ftf file you have is broken so redownload it if none of above work.
Nothing to do with bootloader.
Click to expand...
Click to collapse
THANKS!!!!!!!!!!!!!!!!! A big thanks for this useful post! I know maybe you dont remember that you posted this here but this saved my life!!!!! Thanks man!!!! :good: :good: :good: :good: :good:

Related

Bricked x10

Hi, first of all, i know there are lots of post about bricked phones, trust me, i've seen most of them but none of it helped me and i am kind of fraking out. I got a Sony x10 a few weeks ago and I loved it. I upgraded it to Andoird 2.3.3, rooted it, installed xRecovery, etc. But yesterday I tried to install Android ICS, for that I had to unlock bootloader. Read a lot of post and started, and finally used a method which uses kernel downgrade, a batch program and the kernel upgrade, but guess what, it didn't work, couldn't flash kernel upgrade after all. What freaks me out is that I can't install any ftf either, flashtools keeps showing ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed". Tried using update service, tried with many ftf files and flashtools. Nothing happens. Phone just vibrates a little bit longer than normal when I turn it on and nothing else. It also turn the green led on when connecting to the charger and flash mode seems to work.
I am desperate, I had to do a lot to get a phone like this and now it doesn't even boot with the SE logo. Thanks and I hope someone has the solution.
I forgot to put this:
11/014/2013 14:14:36 - INFO - <- This level is successfully initialized
11/014/2013 14:14:37 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
11/014/2013 14:14:37 - INFO - You can drag and drop ftf files here to start flashing them
11/014/2013 14:14:47 - INFO - Device disconnected
11/015/2013 14:15:19 - INFO - Selected X10_V1_BLRelock.ftf
11/015/2013 14:15:19 - INFO - Preparing files for flashing
11/015/2013 14:15:19 - INFO - Please connect your device into flashmode.
11/015/2013 14:15:26 - INFO - Flash canceled
11/015/2013 14:15:34 - INFO - Selected x10_2.3_aro.ftf
11/015/2013 14:15:34 - INFO - Preparing files for flashing
11/015/2013 14:15:51 - INFO - Please connect your device into flashmode.
11/016/2013 14:16:32 - INFO - Device connected in flash mode
11/016/2013 14:16:32 - INFO - Opening device for R/W
11/016/2013 14:16:33 - INFO - Reading device information
11/016/2013 14:16:33 - INFO - Phone ready for flashmode operations.
11/016/2013 14:16:33 - INFO - Current device : X10i - CB511LGRA4 - 1241-1846_R1C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75
11/016/2013 14:16:33 - INFO - Start Flashing
11/016/2013 14:16:33 - INFO - Processing loader
11/016/2013 14:16:34 - INFO - Using an unofficial loader
11/016/2013 14:16:34 - INFO - Checking header
11/016/2013 14:16:34 - INFO - Ending flash session
11/016/2013 14:16:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/016/2013 14:16:34 - ERROR - Error flashing. Aborted
11/016/2013 14:16:34 - INFO - Device connected in flash mode
11/016/2013 14:16:36 - INFO - Device disconnected
11/016/2013 14:16:38 - INFO - Device connected in flash mode
complete log, saved when trying to flash stock 2.3.3 firmware
That one should be easy to solve When you choose an ftf file to flash in firmware selection window you have to check "No final verification". That worked for me
P.S. also try to post your threads in the right section
brick
u must try another flash tool the older version
U read a lots, but why didnt u unlock using flashtool plugins? It's easier.
Sent from my Xperia X10 using xda app-developers app

0% Trying to flash Xperia J [SOLVED]

Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
xpiixaaa said:
Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
Click to expand...
Click to collapse
What kind of error in the PC Companion, because I updated my J succesfully through this method.
You must be in MTP mode for flashtoool to work bro
gavster26 said:
You must be in MTP mode for flashtoool to work bro
Click to expand...
Click to collapse
Tried with MTP and MSC mode, the green light stills turning off when start flashing message appears (after i plug on my device with volume down key pressed)
goldenboyz said:
What kind of error in the PC Companion, because I updated my J succesfully through this method.
Click to expand...
Click to collapse
The progress bar stays at about 50% and just as in the flashtool the green light turns off, after a while (the bar is in 50%) the error appears.
The error is error 100, I have searched about it but nothing that is mentioned in the forums that could fix this error has worked.
My xperia is not unbranded (I want to do that)
Tried reinstalling several times SEUS and PC C.
I don´t have another laptop to try.
The green light is suppose too turn off after flashing starts my j dose it every time
gavster26 said:
The green light is suppose too turn off after flashing starts my j dose it every time
Click to expand...
Click to collapse
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made ​​the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
xpiixaaa said:
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made ​​the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
Click to expand...
Click to collapse
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
goldenboyz said:
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Yes ihave. I already unlocked bootloader before. its said "contain modified sector. cannot update your phone"
Yeusry_Neko said:
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Click to expand...
Click to collapse
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
xpiixaaa said:
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
Click to expand...
Click to collapse
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Yeusry_Neko said:
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Click to expand...
Click to collapse
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'll try to root it.I'll use this link -> http://forum.xda-developers.com/showthread.php?t=2033114
and i'll inform you the result...hope successful.
soulfunkdjx said:
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'' try to root it.I'll use this link and i'll inform you how will go...hope successful.
Click to expand...
Click to collapse
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Yeusry_Neko said:
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Click to expand...
Click to collapse
Ok guys i made it. For you my friend you should download the Xperia J Driver from here -> http://forum.xda-developers.com/attachment.php?attachmentid=1546091&d=1354951082
and the firmware 11.0.A.7.5 (search it on the net)
Now follow my steps so flashtool can detect your xperia J.
1)Install Flashtool then extract Xperia J Driver (ST26.rar) and copy the ST26.ftd file to c:\Flashtool\devices\
2)Open Flashtool , i assume that you already installed Sony companion software to your PC, so that Flashtool can detect your phone. Go to devices>import and choose Xperia J, wait import to success
3)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security)
4)Connect your phone with usb, and if prompt to select your device, select Xperia J
5)Click Flash icon (looks like thunder) and choose flashmode
6)Then browse the folder where you save the Old firmware (.ftf) file (Make sure you put Old and New firmware in different files). Flashtool will automatically scan files inside the firmware.
7)Click OK
AND Now follow my next step to root your phone..
Tool to download:UnlockRoot (May not compatible with Windows 8) - search it on the net as i can't post links.
1)Make sure you have Sony PC companion installed. Extract unlockroot.rar and run unlockroot.exe as administrator
2)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security) then connect your phone
3)Wait until your phone detected, then click Root button. Wait until finish and follow instruction to reboot.
4)Holla! Your phone rooted now!
VERY SIMPLE AND NO FAILURES!!!!:good:
ONE MORE LAST THING!!!
I update my phone after root to the last firmware by OTA and intalled succesfully without losing any of my data and the root. BUT UPDATE ONLY BY OTA (From the phones menu and not by SEUS or PC COMPANION - That means OTA - ''Over The Air'')
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
soulfunkdjx said:
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
Click to expand...
Click to collapse
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Yeusry_Neko said:
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Click to expand...
Click to collapse
I read that you can't have cwm installed when you are on .75 firmware or the latest one.
So you must have .18 or .28 rooted firmwares to have cwm and working great.
So you must downgrade your Xperia j to these 2 firmwares via flashtool if you want fully support of cwm.
Can't even flash
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
nathaneous said:
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
You must add the Xperia j drivers into flashtool.unfortunately flashtool is coming with no Xperia j support and you must do this manually. Is not so difficult.search my post #15 in this thread for howw is working.if you have problems send me a pm.

(Xperia J) Can't flash in flash mode

Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
NoGynGz said:
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
Click to expand...
Click to collapse
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
gamer649 said:
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
Click to expand...
Click to collapse
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
NoGynGz said:
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
Click to expand...
Click to collapse
Did you install the fastboot and flashmode drives from the setup as you may need them too. I think it would be worth it to install all of the drivers from the driver setup folder. If you try that and then that method after I think it should work.
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Click to expand...
Click to collapse
It is good to hear you got it working. I've just noticed you previously said you tried to repair your phone in PC companion. That would have stopped it working too. I'm sorry I didn't pick that up sooner.
tried all of that but no luck when i press on the thunder icon it says wait for flash
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
Click to expand...
Click to collapse
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Boro2 said:
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Click to expand...
Click to collapse
try another boot.img first in fastboot mode and then try.
Thanks
tuspam said:
try another boot.img first in fastboot mode and then try.
Click to expand...
Click to collapse
Thanks bro it worked
No Luck
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
please help
I also had the same problem but then i managed to flash a stock ics .ftf and now the device is not responding...! NO ligths even after charging my phone is still connected to charger...! someone please help please ...!
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
Remove SIM Card, MMC & then flash! Also, note that sometimes flashing doesn't work after you resume from Standby/Hibernate mode in PC.
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
restore your backup files then flash again ,it's work fine

How to remove AOSP

hi
i try to remove rom "AOSPA 4.0 Beta-5 [UNOFFICIAL] "
but i cant do it.
because i connect my device to computer but computer dont show or cant find my device..
plese help
thanks
sorry for english grammar
SuphanutJui said:
hi
i try to remove rom "AOSPA 4.0 Beta-5 [UNOFFICIAL] "
but i cant do it.
because i connect my device to computer but computer dont show or cant find my device..
plese help
thanks
sorry for english grammar
Click to expand...
Click to collapse
You can try flashing sony ftfs. Connect your phone in flash mode. Flash ftfs with flashtool. I think it'll format your internal storage. Make sure you've a backup of that.
sladeslayer said:
You can try flashing sony ftfs. Connect your phone in flash mode. Flash ftfs with flashtool. I think it'll format your internal storage. Make sure you've a backup of that.
Click to expand...
Click to collapse
Code:
24/054/2014 16:54:45 - INFO - <- This level is successfully initialized
24/054/2014 16:54:45 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
24/054/2014 16:54:49 - INFO - Selected Bundle for Sony Xperia L (C2105). FW release : 15.3.A.1.14. Customization : Indonesia
24/054/2014 16:54:49 - INFO - Preparing files for flashing
24/054/2014 16:54:56 - INFO - Please connect your device into flashmode.
24/054/2014 16:54:56 - INFO - Opening device for R/W
24/054/2014 16:54:57 - INFO - Start Flashing
24/054/2014 16:54:57 - INFO - Processing loader.sin
24/054/2014 16:54:57 - INFO - Checking header
24/054/2014 16:54:57 - INFO - Ending flash session
24/054/2014 16:54:57 - ERROR -
24/054/2014 16:54:57 - ERROR - Error flashing. Aborted
24/054/2014 16:54:57 - ERROR - Drivers need to be installed for connected device.
24/054/2014 16:54:57 - ERROR - You can find them in the drivers folder of Flashtool.
it cant
i can do this now
i forgot to disable driver signature enforcement
thanks for your help!
Flash kernel based stock by fastboot, and flash any cusrom based stock in cwm

[Q] Really need help, xperia u error

Ok, i got a situation here
i having a trouble with my xperia u, in the home screen it keeps poping up notification :
process.android.process.acore has stoped
processcom.google.process.gapps has stopped
google play service has stopped
and several additional application i.e instagram, whatssapp etc had the same pop up notification when i tried to open the application, except for whatsapp there is some additional error notification which said "unable to update message history". i was unable to uninstal any of these application, the application still there after i reboot the device
i'm on ICS with stockfirmware Sony Xperia U (ST25i). FW release : 6.1.1.B.1.100. Customization : Sony, handheld not rooted and when connected to a PC no single folder detected in internal storage directory
things i've tried
1. factory reset and nothing happened, situation remain the same
2. flashing with flash tool and the log goes like:
22/039/2014 09:39:45 - INFO - Selected Bundle for Sony Xperia U (ST25i). FW release : 6.1.1.B.1.100. Customization : Sony
22/039/2014 09:39:45 - INFO - Preparing files for flashing
22/040/2014 09:40:10 - INFO - Please connect your device into flashmode.
22/040/2014 09:40:17 - INFO - Device connected in flash mode
22/040/2014 09:40:18 - INFO - Opening device for R/W
22/040/2014 09:40:18 - INFO - Reading device information
22/041/2014 09:41:45 - INFO - Unable to read from phone after having opened it.
22/041/2014 09:41:46 - INFO - trying to continue anyway
22/041/2014 09:41:46 - INFO - Start Flashing
22/041/2014 09:41:47 - INFO - Processing loader.sin
22/041/2014 09:41:47 - INFO - Checking header
22/041/2014 09:41:47 - ERROR - Processing of loader.sin finished with errors.
22/041/2014 09:41:47 - INFO - Ending flash session
22/041/2014 09:41:47 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
22/041/2014 09:41:47 - ERROR - Error flashing. Aborted
is there anything i can do to make my xperia u operational again?
thanks for the help​
stereoseto said:
Ok, i got a situation here
i having a trouble with my xperia u, in the home screen it keeps poping up notification :
process.android.process.acore has stoped
processcom.google.process.gapps has stopped
google play service has stopped
and several additional application i.e instagram, whatssapp etc had the same pop up notification when i tried to open the application, except for whatsapp there is some additional error notification which said "unable to update message history". i was unable to uninstal any of these application, the application still there after i reboot the device
i'm on ICS with stockfirmware Sony Xperia U (ST25i). FW release : 6.1.1.B.1.100. Customization : Sony, handheld not rooted and when connected to a PC no single folder detected in internal storage directory
things i've tried
1. factory reset and nothing happened, situation remain the same
2. flashing with flash tool and the log goes like:
22/039/2014 09:39:45 - INFO - Selected Bundle for Sony Xperia U (ST25i). FW release : 6.1.1.B.1.100. Customization : Sony
22/039/2014 09:39:45 - INFO - Preparing files for flashing
22/040/2014 09:40:10 - INFO - Please connect your device into flashmode.
22/040/2014 09:40:17 - INFO - Device connected in flash mode
22/040/2014 09:40:18 - INFO - Opening device for R/W
22/040/2014 09:40:18 - INFO - Reading device information
22/041/2014 09:41:45 - INFO - Unable to read from phone after having opened it.
22/041/2014 09:41:46 - INFO - trying to continue anyway
22/041/2014 09:41:46 - INFO - Start Flashing
22/041/2014 09:41:47 - INFO - Processing loader.sin
22/041/2014 09:41:47 - INFO - Checking header
22/041/2014 09:41:47 - ERROR - Processing of loader.sin finished with errors.
22/041/2014 09:41:47 - INFO - Ending flash session
22/041/2014 09:41:47 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
22/041/2014 09:41:47 - ERROR - Error flashing. Aborted
is there anything i can do to make my xperia u operational again?
thanks for the help​
Click to expand...
Click to collapse
Try to Flash Custom Recovery and then flash custom rom from custom recovery.
Thats it.
Index of All Custom Rom and Custom Recoveries here :- http://forum.xda-developers.com/xperia-u/u-development/index-xperia-android-development-t2391151
For Flashing Recovery follow link here:- http://forum.xda-developers.com/xperia-u/u-development/cwm-cwm-touch-recovery-1-0-t1948455
I hope it will help you
Hit Thanks Button if you make your device live again ​
dkchalotra said:
Try to Flash Custom Recovery and then flash custom rom from custom recovery.
Thats it.
Index of All Custom Rom and Custom Recoveries here :- http://forum.xda-developers.com/xperia-u/u-development/index-xperia-android-development-t2391151
For Flashing Recovery follow link here:- http://forum.xda-developers.com/xperia-u/u-development/cwm-cwm-touch-recovery-1-0-t1948455
I hope it will help you
Hit Thanks Button if you make your device live again
Click to expand...
Click to collapse
from this link
http://forum.xda-developers.com/xperia-u/u-development/cwm-cwm-touch-recovery-1-0-t1948455
it told me i should have root and root explorer, what are those? sorry for being idiot
stereoseto said:
from this link
http://forum.xda-developers.com/xperia-u/u-development/cwm-cwm-touch-recovery-1-0-t1948455
it told me i should have root and root explorer, what are those? sorry for being idiot
Click to expand...
Click to collapse
Root will give you access to the phone's system files. It's required for most firmware tweaks and modifications, as well as by many apps on the play store. Root explorer is one of the many root browsers (file manager that can take advantage of the root access) available in the play store. Another one I'm using on my xperia u is root browser. Anyway, you can gain root access extremely easy on your phone. There are many ways, but since I guess you're new to that stuff, you should do it with a rooting toolkit. Since you have the 6.1.1.b.1.100 build, you first need to flash the kernel of the 6.1.1.b.1.10. After this you can use a rooting toolkit to root your device. After rooting, you'll need to flash the 6.1.1.b.1.100's kernel again. Then you can install a custom recovery, like the one you mentioned. For flashing the kernels you have to use the flashtool (search it on the net) and you can also search the net for a rooting toolkit compatible for your firmware. I don't remember what I had used on my xperia u, since it's now running a custom rom.

Categories

Resources