Related
Help! Installation ClockWorkMod writes fail-pu ... PG58IMG.zip any file does not install. Knowledgeable people tell me what's the problem?
FausFear said:
Help! Installation ClockWorkMod writes fail-pu ... PG58IMG.zip any file does not install. Knowledgeable people tell me what's the problem?
Click to expand...
Click to collapse
flash through HBOOT, not recovery
Jonny said:
flash through HBOOT, not recovery
Click to expand...
Click to collapse
how to do it? I am not strong in this (((if you can for more info ...
1st got to settings>power and uncheck fastboot. then power phone completely off.
Next hold vol-down and power until white htc appears.
It will go to bootloader and automatically see the PD58IMG.zip
Oomike said:
1st got to settings>power and uncheck fastboot. then power phone completely off.
Next hold vol-down and power until white htc appears.
It will go to bootloader and automatically see the PD58IMG.zip
Click to expand...
Click to collapse
I ROM is not installed, when you switch displays in FASTBOOT! PD58IMG.zip can not install says in red letters Fail-PU ...
in my opinion I have with HBOOT 1.20.0000 problems. because I started to install automatic ROM ICS 4.0 with the file PD58IMG.zip, there is not the end everything was installed, some written as FAIL-PU.
I've read that if you try to flash the firmware update for hboot 1.20 if you don't have supercid some files may fail to update
Sent from my Kindle Fire using Tapatalk
ar4l said:
I've read that if you try to flash the firmware update for hboot 1.20 if you don't have supercid some files may fail to update
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
tell me how to update? I'm from Russia, it is very difficult to translate and communicate. I ask how you can in a simplified form.
Give us some background info. Was your phone rooted in the first place? Did you follow the path s-off then clockwokmod recovery then root then supercid? What did you do before this happened? Did you try to install the latest RUU 3.06 where hboot 1.20 comes? We are happy to help but it's not easy trying to solve something without some info
Sent from my Kindle Fire using Tapatalk
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
FausFear said:
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
Click to expand...
Click to collapse
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
this is all I've done (Fail-PU) (((((
FausFear said:
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
Click to expand...
Click to collapse
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
ar4l said:
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
Click to expand...
Click to collapse
this is all I've done (Fail-PU) (((((
FausFear said:
this is all I've done (Fail-PU) (((((
Click to expand...
Click to collapse
it failed when trying to flash the recovery which is custom and no stock. try flashing the firmware update only without recovery or rom. you can find it here, that's what i did first flashed the firmware only and after that a rom (android revolution 5.0.2 currently)
anyway, I was talking to some other guys and if noting works you can download a shipped RUU (there's a collection here). Run the exe file and you'll finish with a stock gingerbread system. You'll have to root and install custom recovery and the usual again. If after that you still feel like trying ICS install the firmware update only, not the one you tried.
cheers
Yet another example of someone jumping blind into something they don't understand. If you don't know how to reverse the rooting process you should not even consider rooting in the first place.
There should be some sort of test before rooting information is given out - would stop n00bs getting themselves up **** creek
FausFear said:
this is all I've done (Fail-PU) (((((
Click to expand...
Click to collapse
Are you super cid, if not do so now a d flash custom firmware. Super cid us a low level fastbiit command and can be done on hboot 1.20
Sent from my HTC Sensation Z710e using xda premium
d3vilskid said:
Are you super cid, if not do so now a d flash custom firmware. Super cid us a low level fastbiit command and can be done on hboot 1.20
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
how to make low level fastbiit command?
FausFear said:
how to make low level fastbiit command?
Click to expand...
Click to collapse
Oh dear.......
He is saying SuperCID IS a low level fastboot command, you cannot make one
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
http://www.youtube.com/watch?feature=player_detailpage&list=HL1325964886&v=TaMhxD_aowA
here's a video look
HtcDev bootloader unlock for ChaCha
INFO: unlocking the bootloader will NOT give you s-off but you will be able to root your device and install custom roms.
You will not be able to flash hboot or radios and your device won't be network unlocked.
http://htcdev.com/bootloader
Tutorial here written by theq86: http://forum.xda-developers.com/showthread.php?t=1432199 for people that need help with the process.
Report back if it worked for you guys or if you have any problems.
Use this thread for all your discussions relating to official bootloader unlocking rather than making hundreds of topics for the same info or problems.
That way anybody needing help can come here and ask rather than digging through many pointless posts.
AFTER YOUR UNLOCKED
Once you unlock your bootloader grab yourself clockwork mod from here: http://forum.xda-developers.com/showthread.php?p=15560528 follow the directions to install.
Read the instructions carefully.
Download the file and place in the root of your SD.
Turn off your phone and remove battery.
Replace battery and hold volume down and power until the bootloader opens.
It will scan for the file you placed on your sd root and ask if you want to update
Say yes by pressing the button it says to confirm.
When finished reboot.
NOTE: Delete the clockwork mod file from your SD root or it will keep trying to flash it when you try getting into the bootloader. Do this by either card reader or with a file explorer on your phone.
TO GET INTO CLOCKWORK MOD (CWM)
Power off your phone and remove battery
Replace battery, hold volume down and power, bootloader will open.
Select recovery.
You should now be in clockwork mod.
TO GAIN ROOT ACCESS
download super user package here: http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip and place on your SD
Boot into clockwork mod and choose install zip from SD
Then select the zip location for superuser file you placed on your sd and select it and confirm.
When done click back then reboot system.
You should now be rooted.
To check if you are, open your app drawer (all apps) and you should see a superuser icon.
You also install custom rom's this way (choose zip from SD etc).
Good luck!
For any info on any aspect of your ChaCha be sure to check Alex C's 'everything ChaCha' page:
http://forum.xda-developers.com/showthread.php?p=17396419
He's done a great job putting all the information needed in one place.
Whether you need help or info about battery life, s-off or custom roms that should be your first port of call.
PS. please don't make tons of pointless threads without actually searching current ones for an answer or you'll just make your forum a jumbled mess.
The RUU Updater is giving me a "model ID" error (possibly due to me having S-OFF/SuperCID via the XTC-Clip) - gonna try extracting the rom.zip from the RUU and applying it manually from the bootloader.
EDIT:: Manual application by extracting rom.zip and booting into bootloader got it to apply. Us people who are S-OFF via the XTC-Clip might need to do this to get it to apply. YMMV.
Can anyone confirm if this is also valid for the AT&T version of the Cha Cha, the HTC Status?
Awesome, guided.
unlocked ;-)
just follow the instructions
Will allow us this Unlocking free unlock-sim too?
Thx.
hello !!
it worked for me ...I was able to get my chacha unlocked, but still S-on tho!!
(notice my first post since 10') I used to get an hd2 till my girlfriend broke the screen, took it to some kind of repair stores and they fried the cpu;
mekcra said:
hello !!
it worked for me ...I was able to get my chacha unlocked, but still S-on tho!! :sad:
Click to expand...
Click to collapse
Unlocking the bootloader will NOT s-off your device.
You will be able to root and flash custom roms.
You won't be able to flash hboot or radios.
Your phone will not be network unlocked.
Your warranty will be voided, for any software related problems at least.
hi!! Is there any way to get it S-OFF, other than with the xtc clip ??
Why is that important to get it S-OFF?
With the bootloader unlocked you can flash custom ROM and have root access.
mekcra said:
hi!! Is there any way to get it S-OFF, other than with the xtc clip ??
Click to expand...
Click to collapse
Not right now mate.
But it may be easier to find an exploit now.
I've a problem with the HBOOT update needed by Bootloader Unlock, it need 1.54 update, while i'm on 1.18 and Software Update don't show me any update possibility.
How can i proceed to update to 1.54 ?
You could try updating to this:
http://forum.xda-developers.com/showthread.php?t=1447330
Then try again.
You may have to create a gold card.
Ok, can we get a little help with the rooting process and custom Rom install after unlocking?
I don't think that we can apply the same process as for the S-OFF devices.
Edit - Found some useful info here: http://forum.xda-developers.com/showthread.php?t=1449681&page=2
Original post updated
Sorry for my stupid question how how to instal the clockwork mod?
i got it unlocked but the link you give http://forum.xda-developers.com/show...php?p=15560528 is for s-off only or not ?
manderspaul said:
Sorry for my stupid question how how to instal the clockwork mod?
i got it unlocked but the link you give http://forum.xda-developers.com/show...php?p=15560528 is for s-off only or not ?
Click to expand...
Click to collapse
It will work without s-off if your bootloader is unlocked
Check original post for clockword mod info.
i got it on parsing for 10 min now ?
did i do something wrong ?
Do as it says here: http://forum.xda-developers.com/showthread.php?p=21505871#post21505871
Hello guys! I've a problem, i bought a sensation 4g from t-mobile yesterday, and at first i've unlocked my bootloader, i rooted it, and then i installed the cwm recovery from rom manager, but i forgot to change my supercid, i flashed a rom, and now i can only enter in recovery and bootloader mode! what i have to do to repair my device? i'm looking for a t-mobile rom that i can flash from the recovery ;-)
Search for a full RUU and flash it ...
Then start over ...
Can i flash a RUU if i can't turn on my phone in a normal screen?
ps: I have the message that i've a low battery level :-(, i'm charging the battery
he say me the low battery message if there is not the device plugged, i think that i can't install anything with RUU
If you flashed an ICS rom then you'll need to flash the ICS firmware as well.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
GROGG88 said:
If you flashed an ICS rom then you'll need to flash the ICS firmware as well.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
Click to expand...
Click to collapse
It doesn't work well, i putted this file http://goo.gl/znhyw to my sd card's root, but when i turn on to bootloader and select fastboot, it doesn't show me any screen for upgrade, and if i turn on to bootloader with sd card, it control my files, but after 10 seconds it never show me any request, what's the problem? :-(
It show me: Parsing... [PG58IMG.zip]
and then it shoe me the bootloader menu
My Hboot version is 1.18.0000
Pyramid put ship s-on rl
psp300xxx said:
It doesn't work well, i putted this file http://goo.gl/znhyw to my sd card's root, but when i turn on to bootloader and select fastboot, it doesn't show me any screen for upgrade, and if i turn on to bootloader with sd card, it control my files, but after 10 seconds it never show me any request, what's the problem? :-(
It show me: Parsing... [PG58IMG.zip]
and then it shoe me the bootloader menu
My Hboot version is 1.18.0000
Pyramid put ship s-on rl
Click to expand...
Click to collapse
S-On is your problem.
It won't let you update the firmware with S-On.
Can you give me a link with the firmware with s-on? i'm going to be crazy
and please write me here all the instruction to do all, excuseme if i disturb, but i don't want to send a new phone to the assistence :-(
the guide to s-off is here
http://forum.xda-developers.com/showthread.php?t=1192300
alireza_simkesh said:
the guide to s-off is here
http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
I Can't go to the normal homescreen, i only can go to bootloader and recovery(cwm), i unlocked my bootloader by htcdev.com, but i haven't the revolutionary bootloader, i've the bootloader that i wrote 2 posts ago
Im uploading stock firmware for you now
---------- Post added at 10:58 AM ---------- Previous post was at 10:49 AM ----------
I extracted this from the 1.29 Tmobile US RUU , so just put this on the root of your sd card and it will recognize it in the bootloader
https://www.dropbox.com/s/zu7gxramtap0lga/PG58IMG.zip
Thanks! I'm waiting for it now! What i have to do to flash it? from my bootloader or is a zip that i have to flash from recovery?
it should automatically detect it in bootloader if it is on your sd card, then it will ask you if you want to start update, and you just need to press volume up to start update, and it will do it all for you
if for some reason it doesnt work just let me know
Ok, how big is the update? be carefull that i can update from my bootloader ;-)
its 379mb its the full stock tmobile rom
if i make an app, you can will have it at free
Thanks
shazam1203 said:
its 379mb its the full stock tmobile rom
Click to expand...
Click to collapse
it doesn't show me any request of update! it control all the update, and then it go to the main menu of the bootloader!
it show me:
Sd checking...
Loading...[i dont remind]
no image!
at last :
loading...[,pg58img.zip]
on the right there is a charge battery that when is full it came back to the main menu
did it say loading at all?
shazam1203 said:
its 379mb its the full stock tmobile rom
Click to expand...
Click to collapse
Hey shazam love your user name.... just one Q..... is this a 2.3.4 GB RUU ???
want to keep it for going back to stock.....
shazam1203 said:
did it say loading at all?
Click to expand...
Click to collapse
yes
Firstly thanks to everyone who give their time to help
My tech skills are useless, all these terms s-off, s-on, roms etc
is above my pay grade, my brain is fried i am jumping from thread to thread
trying to fix my wifi issue and it's driving me dilly.
I am on Android 4.0.3 - Sense 3.6, phone is rooted HTC-Dev and Flashed 4EXT.
I have been trying to fix the WiFi issue but im getting nowhere, i give up.
Can i revert back to Gingerbread?
Is there a step by step guide?
Help Appreciated
Thanks
1st: are you s-on or s.off?
If you are s-off you can extract the rom.zip from the appropriate GB RUU (but you dont tell what is) then rename it PG58IMG. Put in the root of your sd card (not in a folder) and reboot the device while holding down volume+ power button.
PG58IMG willbe automatically recognized and start to do its things. Then you will be prompted if you want to upgrade. Say yes by pushing volume up.
Wait untill the entire process is done and prompted to reboot (it may reboot itself a couple of times during the process, just do nothing and wait).
At the end of process you will be back to GB and need to set the phone like new. You will lose all data and settings.
Hope it helps.
How do i know if i'm S-off or S-on?
Used HTCDev to unlock bootloader then flashed 4EXT and something called
CWM-SuperSU-v0.96?
Thanks
This is the method i used:
http://forum.xda-developers.com/showthread.php?t=1632553
Good day my dear friends,
Boring Intro------
Yesterday I was trying to root my wife's HTC Sensation which I upgraded to Official Middle East ICS 4.0.3 hboot 1.27.000 and I found this way by pure luck-----
I installed CMW and did the rooting while the device is S-ON
I'm not sure if this is a new method or was done before but I thought I'd share it to return some of your favors in this great forum.
I need to thank Mr.hasoon2000 because we will use his tol from the HTC One X forum.
Requirements:
1. Download the HTC One X All-In-One Toolkit V1.0 from this link, Thanks Mr.hasoon2000 I hope you don't mind me using your tool here.
2. Download the latest CMW recovery , choose the latest for Pyramid (The Sensation) in *.img. Here is the CMW 5.8.0.9 link.
3. Download SuperSU 0.88.zip, thanks Mr.Chainfire or from this link [23.04.2012] SuperSU v0.88.
Step By Step Method:
1. Copy the SupperSU.zip file to your SD root.
2. Extract the HTC One X All-In-One Toolkit V1.0 to the Disktop.
3. Connect your Mobile and make sure you're in the charging mood and your check USB development or debugging option.
4. Run the One X.exe application.
5. Install the HTC drivers.
****If you unlocked your Sensation's bootloader from HTCdev.com then skip step 6 ****
6. Register in HTCdev.com website, choose Unlock Bootloader, choose your device and follow the instructions. ~This May Void your Warranty~
7. Rename the CWM recovery to CWM5827, then copy it to HTC One X All-In-One Toolkit folder/Data folder/recoveries and replace the one inside.
8. Flush the CWM recovery using the toolkit, horray you installed CWM.
9. From Commands choose Boot into recovery and from CWM flush the SuperSU.zip.
10. Congratulations, You're Now ROOTED .
Unthick fastboot from your phone (should be under settings-Battery) Then reboot phone while holding volume down + power buttons and read what the bootloader says.
Or pull out and reinsert battery, then power up the phone while holding down volume
remove battery from phone
Remove any memory card installed in phone
put battery back into phone
press volume down..
While pressing volume down
Press power button...
Continue pressing both Until you enter bootloader
You will see white screen, print lots of writing in different colored text, but the top line will say 's-on' or 's-off'
Report back here
Sent from my ADR6425LVW using Tapatalk 2
By the way I dont understand why you want to go back to GB. Once you are back you will be prompted to update to ICS again!.
Why dont you run directly a stock ICS RUU and see it it solves your issue?. In case you are S-On that would be the easiest way (the RUU).
If you want to go back to the way the phone was when you first got it, no root or anything, use an RUU
http://forum.xda-developers.com/showthread.php?t=1672425
That's everything you need to know. Basically run a program in Windows with the phone plugged in and it'll do all the work for you.
OK guys looks like i'm S-ON
PYRAMID PUT SHIP S-ON RL
kualmente said:
By the way I dont understand why you want to go back to GB. Once you are back you will be prompted to update to ICS again!.
Click to expand...
Click to collapse
I've tried everything to get my WiFi to work with ICS, read here someone saying reverting to Gingerbread may work.
kualmente said:
Why dont you run directly a stock ICS RUU and see it it solves your issue?. In case you are S-On that would be the easiest way (the RUU).
Click to expand...
Click to collapse
Some help please.
How do i do that, is there a step by step you can point me to?
Thank you very much...
Read the guide posted by Skipjacks. There is all you need.
kualmente said:
Read the guide posted by Skipjacks. There is all you need.
Click to expand...
Click to collapse
Thanks
Will that put me back to Gingerbread?
Cheers
No, if you are s-on the easiest way is to run the appropriate RUU.exe (still ICS not GB). But first you need to make some search and detect what is the right RUU for you according to your country, cid and mid.
When you will find it, just download the exe and, plug your phone to the pc and execute the RUU.exe
You cannot go back to GB as you are S-On.
RUU works for either the same software version or up not down.
I forgot to unlock bootloader before doing s-off now my phone's s-off with a locked bootloader When I flash the unlock token now the phone displays the unlock bootloader screen and lets me select yes or no using vol up/down but i can't select yes with the power button, when i try nothing happens but i'm able to select no so i guess the problem is that the phone's s-off? i wouldn't wanna return to s-on unless i have to Anyone can help?
fugeeohu said:
I forgot to unlock bootloader before doing s-off now my phone's s-off with a locked bootloader When I flash the unlock token now the phone displays the unlock bootloader screen and lets me select yes or no using vol up/down but i can't select yes with the power button, when i try nothing happens but i'm able to select no so i guess the problem is that the phone's s-off? i wouldn't wanna return to s-on unless i have to Anyone can help?
Click to expand...
Click to collapse
if you have S-OFF you don't need to unlock bootloader
just install 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
done
Thanks, What if I wanted to RUU the phone in the future RUU requires locked bootloader so I guess RUU is out of the question once this hboot's been installed? I know I don't need to RUU, I can install any zipped rom but I still wanna know
fugeeohu said:
Thanks, What if I wanted to RUU the phone in the future RUU requires locked bootloader so I guess RUU is out of the question once this hboot's been installed? I know I don't need to RUU, I can install any zipped rom but I still wanna know
Click to expand...
Click to collapse
with this hboot you can use RUU without locking bootloader AFAIK
but don't worry you can always use a RUU.exe
that's not a problem at all