Hello guys, I wasn't sure where I should post this but I have compiled my tun.ko file after searching around online for a while. and after seeing so many requests for this file I thought I should post this here
kernel version : 2.6.35.10-g1643b58
Related
Hi folks!
My intention is to get openvpn working: I'm relatively new to Android and I'm trying to convince my ME511 on a one-click rooted 2.6.29-omap1 kernel with Android 2.1-update1 to load the tun.ko extension.
I think I need a newer build due the device is relatively new, too.
Builds I googled throughout the internet don't load with insmod. Nor do I have modprobe... so there's no tun support by default and I need to solve that as the last missing problem to get openvpn working.
Could someone give a short walkthrough on how this is done? For the Droid 2 and Droid X devices people have working builds.
Thanks for answers,
Marius
If anyone with the know-how could compile a tun.ko file for the 2.6.32-g3c08447 kernel I would be very appreciative. I have been reading for the past few hours but I just don't know enough about linux to do it myself. The only thing that I do not have working yet is the ability to connect to Cisco ASA VPNs and the tun.ko file will give us that.
Thank you in advance!!
NVM. After more reading I found that you need the source for the kernel and we don't have that yet. Mods can delete this post, please.
hello. im new to android and i'm messing with openvpn and i need tun.ko. from what i understand, not just any tun.ko will work with a particular rom so i was wondering if anyone knows where i can obtain or at least make this file that would possibly work with the TPGB20110518 rom? thanks.
You should probably post in the author's thread, but I sse you probably can't post in the dev section yet (need 10 posts I think). Anyway, I looked at that ROM in the dev section and it's apparently running Di11igaf's kernel. I checked out his thread here:
http://forum.xda-developers.com/showthread.php?t=1070501
but he doesn't post any links to the kernel source.
With the source, it would be a simple matter of compiling in the module and adding it. I'd suggest you contact the author.
Pm the developer and he will respond asap
the issue was actually already resolved. did a bit of reading and apparently tun.ko file was built into cm so seeing as tpgb is based off of cm, it was built in as well. =)
Source is posted. Git is in my sig for the kernel
Never mind, a further search pointed the source on the LG web site. But it is still appreciated if someone can post tun.ko because people were looking for it and I don't have the setup to do the compiling yet.
===============
I was trying to get tun.ko for ThiaiZO3D or other GB build. I searched the forum and found several people asked before in ThiaiZ's thread and ThiaiZ seemed to acknowledge to add TUN support long ago but it never appeared in ThiaiZ's kernel. I PM'ed ThiaiZ but he did not respond to me. So I am asking help here. In order to build tun.ko, do I need the original source to compile, or can I just grab some other source and set the correct CPU type and version header to just compile the module? If the original source is needed, where to find it? Or if someone had the source handy, can you post the tun.ko? Thanks for your help.
mbuugg said:
Never mind, a further search pointed the source on the LG web site. But it is still appreciated if someone can post tun.ko because people were looking for it and I don't have the setup to do the compiling yet.
===============
I was trying to get tun.ko for ThiaiZO3D or other GB build. I searched the forum and found several people asked before in ThiaiZ's thread and ThiaiZ seemed to acknowledge to add TUN support long ago but it never appeared in ThiaiZ's kernel. I PM'ed ThiaiZ but he did not respond to me. So I am asking help here. In order to build tun.ko, do I need the original source to compile, or can I just grab some other source and set the correct CPU type and version header to just compile the module? If the original source is needed, where to find it? Or if someone had the source handy, can you post the tun.ko? Thanks for your help.
Click to expand...
Click to collapse
Hi mate, sorry if I didn't answer, I have really a lot of things to do right now, but would like to help as soon as I make my 4 ROM out there stable. 2/4 are already working stable, so soon we can join forces to port what you need in the kernel.
Sent from my LG-P920 using xda premium
Thanks ThiaiZ! Actually trax11 has post tun/cifs modules long time ago. I should have done more homework before posting.
http://forum.xda-developers.com/showthread.php?p=23264904
I have a galaxy tab 2 10.1. I want to get a vpn client (F5) running, but I need the tunnel module. I rooted the tablet, and have tun.ko installer on it, but there's no tunnel module available. So i thought I'd compile my own since I use linux on my pc, but I'm having trouble finding the source for the kernel. tun.ko installer says my system is:
model: gt-p5113
build number: IML74K.P5113UEALD7
Android version: 4.0.3
Kernel version: 3.0.8-396106-user
Does anyone know where I can find the source for the kernel? I tried http://android.git.kernel.org, but I didn't see it.
Thanks.
You could personal message cheatman about it (see this thread).
thanks. cheatman provided me this info:
Code:
The samsung code for the P5113 can be found here: http://opensource.samsung.com/
I can't give you a direct link because of the site JS codes, but do a search for "p5113" and it should turn out a single result.
i got the source code and the ARM cross compiler, but according the directions i found, the next step is i need to get the config.gz file off the tablet, but that file doesn't exist. anyone know what i could do about that? thanks again.
still can't find the tunnel module or config.gz, anyone have any ideas on how i can get this working? thanks
tun.ko for gt-p5100
we're having the same problem bro.. i cant find tun.ko for my tab2.. i can't use my openvpn.. grr.. by now i'm downloading the link that someone gave to you,,., my question is.. after downloading that.. what would happen next? was that the tun.ko that we are looking for?
aleks12345 said:
we're having the same problem bro.. i cant find tun.ko for my tab2.. i can't use my openvpn.. grr.. by now i'm downloading the link that someone gave to you,,., my question is.. after downloading that.. what would happen next? was that the tun.ko that we are looking for?
Click to expand...
Click to collapse
i downloaded the source code, but there's no config.gz file, so i couldn't compile the tun.ko module